He capture by negatively charged Buckminsterfullerene

The first observation of capture of He atoms by negatively charged Buckminsterfullerence (C₆₀) is reported. The collision energy dependence of the production of the endohedral complex is presented in the region of the energetic threshold and compared directly with results obtained using positively charged C₆₀. The threshold for capture by negative ions is shifted by ≈ 1.5 eV to higher energies. This shift can be accounted for by considering the different internal energies of the positive and negative ions.     

Oil-in-water microemulsions stabilized by charged diblock copolymers

We present here oil-in-water microemulsions stabilized by charged diblock copolymers alone, along with their structural characterization by small-angle neutron scattering measurements. They consist of swollen spherical micelles containing small amounts of oil in their core, which is surrounded by a corona of stretched polyelectrolyte chains. Structural changes, including core size variations, are evidenced when using a cosurfactant, or upon addition of salt, through a contraction of the charged corona. Attempts to relate the micellar structure to the individual copolymer characteristics are also presented, and show that the size of the hydrophobic block mainly determines that of the micelles.     

Separation of negatively charged carbohydrates by capillary electrophoresis

Capillary electrophoresis (CE) has recently emerged as a highly promising technique consuming an extremely small amount of sample and capable of the rapid, high-resolution separation, characterization, and quantitation of analytes. CE has been used for the separation of biopolymers, including acidic carbohydrates. Since CE is basically an analytical method for ions, acidic carbohydrates that give anions in weakly acid, neutral, or alkaline media are often the direct objects of this method. The scope of this review is limited to the use of CE for the analysis of carbohydrates containing carboxylate, sulfate, and phosphate groups as well as neutral carbohydrates that have been derivatized to incorporate strongly acidic functionality, such as sulfonate groups.     

Adsorption orientations and interactions of methyl orange on negatively and positively charged colloidal silver particles

Both positively and negatively charged colloidal silver particles were prepared from chemical deoxidized methods. Then UV-visible absorption, fluorescence, and surface-enhanced Raman scattering of methyl orange adsorbed onto surfaces of these two kinds of particles were observed and compared with each other. The results indicate that dye molecules may adsorb onto these two kinds of silver surface in differing adsorption orientations with different interactions, which caused the different phenomena.     

Internally self-assembled submicrometer emulsions stabilized with a charged polymer or with silica particles

Internally self-assembled submicrometer emulsions were stabilized by F127, by the charged diblock copolymer K151, by L300 particles, and by sodium dodecyl sulfate (SDS). The stabilization of all investigated internal phases and the impact of the stabilizer on them are discussed. The use of charged stabilizers results in a highly negative zeta potential of the emulsion droplets, which can be exploited as a means to control their adsorption onto charged surfaces. Small-angle X-ray scattering and dynamic light scattering were used to determine the internal structure and size of the emulsion droplets, respectively.     

Dispersions of internally liquid crystalline systems stabilized by charged disklike particles as pickering emulsions: basic properties and time-resolved behavior

The present paper reports on dispersions of internally liquid crystalline particles, formed from monoglyceride and oil mixtures, stabilized with discrete disklike particles of Laponite clay. Small-angle X-ray scattering (SAXS) was used to probe the presence of dispersed particles as well as their internal liquid crystalline structure. The data were compared to scattering results of reference systems, namely, from the bulk as well as from well-defined particles formed with a polymer as the emulsifier. The submicrometer sizes of the various particles could be derived using dynamic light scattering (DLS). The possible mechanisms involved in the stabilization of each of the different phases by the Laponite platelets, including the role of the residual salt, are discussed. Time-resolved experiments were performed over 60 days in order to follow the evolution of both the internal structure and size of the particles. In particular, we discuss the peculiar behavior of the sample without added oil, where the cubosomes transform into hexosomes over time. The effect of the high pH induced by the Laponite platelets in water, which could result in a hydrolysis of the monoglycerides, was shown to be responsible for the observed cubosome-to-hexasome transition, as well as for the decrease in the lattice parameters.     

Chiral separation of highly negatively charged enantiomers by capillary electrophoresis

The separation of two highly negatively charged enantiomeric organic disulfates containing two chiral centers was investigated by capillary electrophoresis using cyclodextrin based chiral selectors added to the run buffer. The optimum separation for the enantiomers was achieved in less than 3 min at 25 degrees C with a run buffer of 10 mM glycine pH 2.4 and 5 mM QA-beta-CD, which is a positively charged quaternary ammonium beta-cyclodextrin derivative. The method resulted in baseline resolution, excellent linearity, and highly reproducible migration times allowing facile evaluation of the enantiomeric purity of the individual isomers. Detection limits for the enantiomeric pair were determined to be 0.3 ng/microl (S/N = 3). The nature of the selector-enantiomer interaction and a quantitative measurement of the apparent stability constants that governed chiral discrimination of the enantiomers with QA-beta-CD were also investigated by UV-Vis spectroscopy and electrospray ionization mass spectrometry.     

Calculation of the salt separation by negatively charged gel-filled membranes

The salt separations of negatively charged gel-filled membranes composed of poly(2-acrylamido-2-methylpropanesulfonic acid) gels anchored within a polypropylene microporous substrate have been determined experimentally and modeled theoretically. The separation of these membranes were calculated by both the Teorell, Meyer and Sievers (TMS) model and the Donnan–Steric Pore (DSP) model coupled with the extended Nernst–Planck equation. For modeling, the membrane effective thickness, effective charge density, and pore radius were either directly measured or calculated from theories without the use of fitting procedures. Good agreement between the experimental measurements and the theoretical calculations of salt separation was observed. For the theoretical calculations, the TMS model is suitable for membranes with moderate gel polymer volume fractions, while the DSP model is more suitable for membranes with high gel polymer volume fractions. Moreover, with a calculated constant effective charge density, the salt separation with different salt concentrations could be accurately predicted. The separation of various other salts could also be predicted with good accuracy.     

Decay of charged stabilized jellium clusters

The stabilized jellium model is a simple modification of the jellium model, which more realistically describes simple metals of high density, such as Al, Ga, Pb, etc. We analyzed the fragmentation processes of charged spherical Al clusters in the framework of the stabilized jellium model. Kohn-Sham calculations of the parents and daughters, using the local density approximation, have been made. We evaluated the dissociation energies of Al, Al, and Al, with N=1-30 atoms, in all possible decay channels. We discuss the most favorable decay channels, which are ruled by the shell structure (magic numbers of valence electrons in the parents and the daughters) oscillations around an average trend given by a liquid drop model. We compare our calculations with others and with the available experimental data. © 1995 John Wiley & Sons, Inc.     

Oil-in-water emulsions stabilized by highly charged polyelectrolyte-grafted silica nanoparticles

Fully sulfonated poly(styrenesulfonate) brushes were grown from the surface of colloidal silica particles and used to prepare stable trichloroethylene-in-water and heptane-in-water Pickering emulsions. These particles were highly charged and colloidally stable in water but could not be dispersed in trichloroethylene or heptane. Both two-phase (emulsion plus neat water) and three-phase (emulsion separating neat oil and water phases) systems were observed, with water-continuous emulsion phases in all cases. Emulsion phases containing as much as 83% (v/v) oil were stable for over six months. Poly(styrenesulfonate)-grafted particles were very efficient emulsifiers; stable emulsion phases were prepared when using as little as 0.04 wt% particles. The emulsifying effectiveness of the poly(styrenesulfonate)-grafted silica particles can be attributed to the hydrophobicity of the vinylic polymer backbone that makes this highly charged polyelectrolyte unusually surface active at the oil/water interface.     

Solutions of negatively charged graphene sheets and ribbons

Negatively charged graphene layers from a graphite intercalation compound spontaneously dissolve in N-methylpyrrolidone, without the need for any sonication, yielding stable, air-sensitive, solutions of laterally extended atom-thick graphene sheets and ribbons with dimensions over tens of micrometers. These can be deposited on a variety of substrates. Height measurements showing single-atom thickness were performed by STM, AFM, multiple beam interferometry, and optical imaging on Sarfus wafers, demonstrating deposits of graphene flakes and ribbons. AFM height measurements on mica give the actual height of graphene (ca. 0.4 nm).     

PS colloidal particles stabilized by graphene oxide

Exfoliated graphene oxide (GO) sheets with hydrophilic functional groups on the surface were prepared by the oxidation of graphite. Because of the hydrophilic groups on the sheets and the hydrophobic carbon surface, GO sheets were located at the oil-water interface and could be used as a stabilizer in Pickering emulsions. After the Pickering emulsion polymerization of styrene, PS colloidal particles with GO sheets on the surface were prepared. The size of the GO sheets exerts an important influence on the preparation of PS colloidal particles. Small GO sheets located at the liquid-liquid interface and GO-stabilized PS colloidal particles were prepared; however, for large GO sheets, smaller PS colloidal particles prepared on the GO surface were observed. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure and morphology of the colloidal particles. TEM, SEM, and XPS results all suggest the successful preparation of GO-stabilized PS colloidal particles.     

Colloidal particles coated and stabilized by DNA-wrapped carbon nanotubes

Single-walled carbon nanotubes (SWNTs) are dispersed in water via wrapping with short segments of single-stranded DNA (ssDNA). Small angle neutron scattering suggests a power-law exponent that is consistent with clustered nanotubes and hence marginal stability. The SWNT-ssDNA complex is used to stabilize dispersions of hydrophilic colloidal particles with the nanotubes adhered to the surface of the colloids. Near-infrared fluorescence microscopy demonstrates the interfacial band-gap fluorescence of these SWNT-coated particles, suggesting potential routes to novel platforms and applications.     

Adsorption of barium and calcium chloride onto negatively charged alpha-Fe(2)O(3) particles

Adsorption of cations (Na(+), Ca(2+), Ba(2+)) onto negatively charged (pH 10.4) hematite (alpha-Fe(2)O(3)) particles has been studied. The oxide material was carefully prepared in order to obtain monodisperse suspensions of well-crystallized, quasi-spherical particles (50 nm in diameter). The isoelectric point (IEP) is located at pH 8.5. Adsorption of barium ions onto oxide particles was carried out and the electrophoretic mobility was measured throughout the adsorption experiment. Comparison with calcium adsorption at full coverage reveals a higher uptake of Ba(2+). In both cases it shows also that chloride ions coadsorb with M(2) ions. Simultaneous uptake of the positive and negative ions explains why the electrophoretic mobility does not reverse to cationic migration. A theoretical study of the surface speciation has been carried out, using the MuSiC model. It reveals the presence of negative as well as positive sites on both sides of the point of zero charge (PZC) of the hematite particles, which may explain the coadsorption of Ba(2+) and Cl(-) at pH 10.4. The effective charge of the oxide particles, calculated from the electrophoretic mobility, is in very good agreement with the results found with the MuSiC modelization and the chloride/barium adsorption ratio. It also verifies the theory of ionic condensation. Calorimetric measurements gave a negative heat for the overall reaction occurring when Ba(2+)/Cl(-) ions adsorb onto hematite. Despite the fact that anions (Cl(-) and OH(-)) adsorption onto mineral oxides is an exothermic phenomenon, it is likely that barium and calcium adsorption is endothermic, denoting the formation of an inner-sphere complex as reported in the literature.     

Solubilization of negatively charged DPPC/DPPG liposomes by bile salts

The interactions of the bile salts sodium cholate (NaC) and sodium deoxycholate (NaDC) in 0.1 M NaCl (pH 7.4) with membranes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphatidylglycerol (DPPG) and mixtures of DPPC and DPPG at molar ratios of 3:1 and 1:1 were studied by means of high-sensitivity isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and differential scanning calorimetry (DSC). The partition coefficients and the transfer enthalpies for the incorporation of bile salt molecules into the phospholipid membranes were determined by ITC. The vesicle-to-micelle transition was investigated by ITC, DLS, and DSC. The phase boundaries for the saturation of the vesicles and their complete solubilization established by ITC were in general agreement with DLS data, but systematic differences could be seen due to the difference in detected physical quantities. Electrostatic repulsion effects between the negatively charged bile salt molecules and the negatively charged membrane surfaces are not limiting factors for the vesicle-to-micelle transition. The membrane packing constraints of the phospholipid molecules and the associated spontaneous curvature of the vesicles play the dominant role. DPPG vesicles are transformed by the bile salts into mixed micelles more easily or similarly compared to DPPC vesicles. The saturation of mixed DPPC/DPPG vesicles requires less bile salt, but to induce the solubilization of the liposomes, significantly higher amounts of bile salt are needed compared to the concentrations required for the solubilization of the pure phospholipid systems. The different solubilization behavior of DPPC/DPPG liposomes compared to the pure liposomes could be due to a specific "extraction" of DPPG into the mixed micelles in the coexistence region.     

Separation of negatively charged nonsteroidal anti-inflammatory drugs by reversed-phase capillary electrochromatography

Reversed-phase capillary electrochromatography in a 5-microm C18 fully packed capillary was employed to optimize the separation of negatively charged nonsteroidal anti-inflammatory drugs. The effect of the physico-chemical parameters and different analysis modes on the separation of 2-arylpropionic acids was studied and evaluated. The mobile phase composition, buffer type, concentration and pH differently influenced the peak efficiency and resolution, selectively modulating the analytes interaction with the stationary phase. The use of zwitterionic MES or acetate mobile phases strongly modulated the analytes migration order and peak efficiency. The optimum experimental conditions were found in MES buffer, pH 5.0, containing the 75% acetonitrile-methanol (1:1). All the analytes were baseline separated in a mixture in less than 13 min with peak efficiencies in the range of 78,500-84,200 N/m. Under these conditions the analytes were negatively charged and their effective electrophoretic mobilities played a role in the separation. The analysis of different pharmaceutical preparations containing anti-inflammatory drugs, e.g. drops and tablets, is also presented after a very simple sample pretreatment.     

Sustainable food-grade Pickering emulsions stabilized by plant-based particles

This review summarizes the major advances that have occurred over the last 5 years in the use of plant-based colloidal particles for the stabilization of oil-in-water and water-in-oil emulsions. We consider the characteristics of polysaccharide-based particles, protein-based particles and organic crystals (flavonoids) with respect to their particle size, degree of aggregation, anisotropy, hydrophobicity and electrical charge. Specific effects of processing on particle functionality are identified. Special emphasis is directed towards the issue of correctly defining the stabilization mechanism to distinguish those cases where the particles are acting as genuine Pickering stabilizers, through direct monolayer adsorption at the liquid–liquid interface, from those cases where the particles are predominantly behaving as ‘structuring agents’ between droplets without necessarily adsorbing at the interface, for example, in many so-called high internal phase Pickering emulsions. Finally, we consider the outlook for future research activity in the field of Pickering emulsions for food applications.     

Preparation and characterization of novel negatively charged hybrid membranes

Charged hybrid membranes with anionic‐ or cationic‐exchange groups have attracted increasing interest due to their higher thermal stabilities and structural flexibilities which are considered suitable for use in some harsh conditions, such as higher temperature and strongly oxidizing circumstances, for industrial applications. To develop new routes to synthesize the negatively charged hybrid membranes, a series of hybrid membranes were prepared via free radical polymerization of glycidylmethacrylate (GMA) and γ‐methacryloxypropyl trimethoxy silane (MPTMS) monomers, and ring‐opening of epoxide to create negatively charged ? SO₃H groups in the polymer chains. The fundamental properties of these prepared membranes were characterized through TGA, ion‐change capacity (IEC), and MALDI–TOF mass spectra. TGA showed that the thermal degradation temperature of these membranes could reach up to 300°C and the temperature of the first endothermic peak decreased with an increase in the content of ? SO₃H groups. IEC measurements showed that their IECs were within the range of 0.22–0.35 mmol g^?1. MALDI–TOF spectrometry indicated that the incorporation of GMA into the hybrid matrix could improve the structural stability of the membranes. These findings demonstrated that the ion‐exchange properties and structural stability of negatively charged hybrid membranes can be conveniently controlled by adjusting the GMA moiety in the hybrid matrix. Copyright © 2009 John Wiley & Sons, Ltd.     

Geometries and electronic structures of negatively charged carbon clusters

Self-consistent field molecular orbital calculations have been performed on neutral and negatively charged clusters of carbon atoms using an extended basis set designed to obtain correct electron affinity. Correlation effects have been included perturbatively up to second order. The optimized geometries of theC _n ^? (n ≤ 7) anions are all linear chains as observed in experiments. The calculated electron affinities are comparable with experimental data. Studies of the stabilities of doubly charged anions show that clusters uptoC ₇ ^?? are unstable.