Poly(dimethylsiloxane)-coated sensor devices for the formation of supported lipid bilayers and the subsequent study of membrane interactions

The development of smooth hydrophilic surfaces that act as substrates for supported lipid bilayers (SLBs) is important for membrane studies in biology and biotechnology. In this article, it is shown that thin films of poly(dimethylsiloxane) (PDMS) formed on a sensor surface can be used as a substrate for the deposition of reproducible and homogeneous zwitterionic SLBs by the direct fusion of vesicles. Poly(dimethylsiloxane) solution (1% w/v) was spin coated on Love acoustic wave and surface plasmon resonance devices to form a thin PDMS layer. Acoustic, fluorescence, and contact angle measurements were used for the optimization of the PDMS film properties as a function of plasma etching time; parameters of interest involve the thickness and hydrophilicity of the film and the ability to induce the formation of homogeneous SLBs without adsorbed vesicles. The application of PDMS-coated sensor devices to the study membrane of interactions was demonstrated during the acoustic and fluorescence detection of the binding of melittin and defensin Crp4 peptides to model supported lipid bilayers.     

Double cushions preserve transmembrane protein mobility in supported bilayer systems

Supported lipid bilayers (SLBs) have been widely used as model systems to study cell membrane processes because they preserve the same 2D membrane fluidity found in living cells. One of the most significant limitations of this platform, however, is its inability to incorporate mobile transmembrane species. It is often postulated that transmembrane proteins reconstituted in SLBs lose their mobility because of direct interactions between the protein and the underlying substrate. Herein, we demonstrate a highly mobile fraction for a transmembrane protein, annexin V. Our strategy involves supporting the lipid bilayer on a double cushion, where we not only create a large space to accommodate the transmembrane portion of the macromolecule but also passivate the underlying substrate to reduce nonspecific protein-substrate interactions. The thickness of the confined water layer can be tuned by fusing vesicles containing polyethyleneglycol (PEG)-conjugated lipids of various molecular weights to a glass substrate that has first been passivated with a sacrificial layer of bovine serum albumin (BSA). The 2D fluidity of these systems was characterized by fluorescence recovery after photobleaching (FRAP) measurements. Uniform, mobile phospholipid bilayers with lipid diffusion coefficients of around 3 x 10(-8) cm2/s and percent mobile fractions of over 95% were obtained. Moreover, we obtained annexin V diffusion coefficients that were also around 3 x 10(-8) cm2/s with mobile fractions of up to 75%. This represents a significant improvement over bilayer platforms fabricated directly on glass or using single cushion strategies.     

Formation of arenicin-1 microdomains in bilayers and their specific lipid interaction revealed by Z-scan FCS

Z-scan fluorescence correlation spectroscopy (FCS) is employed to characterize the interaction between arenicin-1 and supported lipid bilayers (SLBs) of different compositions. Lipid analogue C8-BODIPY 500/510C5-HPC and ATTO 465 labelled arenicin-1 are used to detect changes in lipid and peptide diffusion upon addition of unlabelled arenicin-1 to SLBs. Arenicin-1 decreases lipid mobility in negatively charged SLBs. According to diffusion law analysis, microdomains of significantly lower lipid mobility are formed. The analysis of peptide FCS data confirms the presence of microdomains for anionic SLBs. No indications of microdomain formation are detected in SLBs composed purely of zwitterionic lipids. Additionally, our FCS results imply that arenicin-1 exists in the form of oligomers and/or aggregates when interacting with membranes of both compositions.     

EPR and fluorescence study of molecular dynamics of lipids in bilayers adsorbed on porous silica gel

Lipid bilayers immobilized on highly porous silica gel monoliths (SLBs) have been proposed as templates for chemosensors. Procedures for preparation and characterization of SLBs have been developed and applied. Rotational dynamics and orientational ordering at different depths in a SLB membrane and, for comparison, in bilayer liposomes have been studied for the first time using n-PC phospholipid spin labels.     

Fluidic and air-stable supported lipid bilayer and cell-mimicking microarrays

As drug delivery, therapy, and medical imaging are becoming increasingly cell-specific, there is a critical need for high fidelity and high-throughput screening methods for cell surface interactions. Cell membrane-mimicking surfaces, i.e., supported lipid bilayers (SLBs), are currently not sufficiently robust to meet this need. Here we describe a method of forming fluidic and air-stable SLBs through tethered and dispersed cholesterol groups incorporated into the bottom leaflet. Achieving air stability allows us to easily fabricate SLB microarrays from direct robotic spotting of vesicle solutions. We demonstrate their application as cell membrane-mimicking microarrays by reconstituting peripheral as well as integral membrane components that can be recognized by their respective targets. These demonstrations establish the viability of the fluidic and air-stable SLB platform for generating content microarrays in high throughput studies, e.g., the screening of drugs and nanomedicine targeting cell surface receptors.     

Evidence for the mechanism of photocatalytic degradation of the bacterial wall membrane at the TiO2 interface by ATR-FTIR and laser kinetic spectroscopy

The photocatalytic peroxidation of E. coli cell, lipo-polysaccharide (LPS), phosphatidyl-ethanolcholine (PE), and peptidoglycan (PGN) of the E. coli membrane wall has been investigated on TiO2 porous films by ATR-FTIR spectroscopy. The fast reactions of the photogenerated charge carriers in TiO2 with E. coli, LPS, and PE were monitored by laser kinetic spectroscopy. ATR-FTIR spectroscopy allowed the identification of E. coli, LPS, PE, and PGN as photocatalytic peroxidation products. The PGN was observed to be the most resistant membrane wall component. Shorter peroxidation times were observed for LPS and PE. Laser photolysis shows that E. coli, LPS, and PE compete in the scavenging of a surface trapped holes (h+) with the recombination reaction of h+ with the generated electrons (e-) within times > 50 ns. This scavenging leads to the formation of organic radicals initiating the radical chain peroxidation of E. coli, LPS, PE, and PE.     

Drying and rehydration of DLPC/DSPC symmetric and asymmetric supported lipid bilayers: a combined AFM and fluorescence microscopy study

This work characterizes the impact of lipid symmetry/asymmetry on drying/rehydration reorganization in phase-separated dilauroylphosphatidylcholine (DLPC)/distearoylphosphatidylcholine (DSPC) supported lipid bilayers (SLBs) at the submicron and micron-scale. In addition the prevention of major drying/rehydration reorganization by the use of trehalose is demonstrated. Even though it was found using fluorescence microscopy that micrometer scale structure is preserved in the presence and absence of trehalose upon drying/rehydration, AFM and FRAP experiments successfully revealed major changes in the phase-separated structure such as defects, obstructions, lipid condensation, collapse structures, and complex incomplete DLPC-DSPC mixing/exchange in the absence of trehalose. In the presence of trehalose the membrane preserves its structure at the nanometer scale and mobility. We found that SLBs with asymmetric domain configurations underwent major rearrangements during drying and rehydration, whereas the symmetric domain configuration mainly rearranged during rehydration, that we hypothesize is related to lower transmembrane cohesiveness or lack of anchoring to the substrate in the case of the asymmetric domains.     

Lipid-rhodopsin hydrophobic mismatch alters rhodopsin helical content

The ability of photoactivated rhodopsin to achieve the enzymatically active metarhodopsin II conformation is exquisitely sensitive to bilayer hydrophobic thickness. The sensitivity of rhodopsin to the lipid matrix has been explained by the hydrophobic matching theory, which predicts that lipid bilayers adjust elastically to the hydrophobic length of transmembrane helices. Here, we examined if bilayer thickness adjusts to the length of the protein or if the protein alters its conformation to adapt to the bilayer. Purified bovine rhodopsin was reconstituted into a series of mono-unsaturated phosphatidylcholines with 14-20 carbons per hydrocarbon chain. Changes of hydrocarbon chain length were measured by (2)H NMR, and protein helical content was quantified by synchrotron radiation circular dichroism and conventional circular dichroism. Experiments were conducted on dark-adapted rhodopsin, the photo-intermediates metarhodopsin I/II/III, and opsin. Changes of bilayer thickness upon rhodopsin incorporation and photoactivation were mostly absent. In contrast, the helical content of rhodopsin increased with membrane hydrophobic thickness. Helical content did not change measurably upon photoactivation. The increases of bilayer thickness and helicity of rhodopsin are accompanied by higher metarhodopsin II/metarhodopsin I ratios, faster rates of metarhodopsin II formation, an increase of tryptophan fluorescence, and higher temperatures of rhodopsin denaturation. The data suggest a surprising adaptability of this G protein-coupled membrane receptor to properties of the lipid matrix.     

On the effect of the solid support on the interleaflet distribution of lipids in supported lipid bilayers

The adsorption and spreading of lipid vesicles on solid supports has become a popular way to create supported lipid bilayers (SLBs), but little attention has been paid to the possible redistribution of lipid material between the two leaflets of an SLB. We use the technique of quartz crystal microbalance with dissipation monitoring (QCM-D) to follow the adsorption of prothrombin on SLBs formed from sonicated unilamellar vesicles containing mixtures of dioleoylphosphatidylcholine (DOPC) and dioleoylphospatidylserine (DOPS). The specific interaction of prothrombin with negatively charged lipids is quantified and serves as a reporter of the content of accessible DOPS in SLBs. We compare results obtained on silica and mica and find that the underlying support can induce substantial redistribution of lipid material between the two leaflets. In particular, SLBs formed on mica showed a substantially depleted amount of accessible DOPS in the presence of calcium. The mechanisms that lead to the lipid redistribution process are discussed.     

Microcontact printing for creation of patterned lipid bilayers on tetraethylene glycol self-assembled monolayers

Supported lipid bilayers (SLBs) formed on many different substrates have been widely used in the study of lipid bilayers. However, most SLBs suffer from inhomogeneities due to interactions between the lipid bilayer and the substrate. In order to avoid this problem, we have used microcontact printing to create patterned SLBs on top of ethylene-glycol-terminated self-assembled monolayers (SAMs). Glycol-terminated SAMs have previously been shown to resist absorbance of biomolecules including lipid vesicles. In our system, patterned lipid bilayer regions are separated by lipid monolayers, which form over the patterned hexadecanethiol portions of the surface. Furthermore, we demonstrate that α-hemolysin, a large transmembrane protein, inserts preferentially into the lipid bilayer regions of the substrate.     

Peptide functionalized polydiacetylene liposomes act as a fluorescent turn-on sensor for bacterial lipopolysaccharide

Mixed polydiacetylene (PDA) liposomes functionalized on their surface with a fluorescent pentalysine peptide derivative and histidine in a ratio of 1:9 can identify bacterial lipopolysaccharide (LPS). Upon photopolymerization of the self-assembled liposomes the initial fluorescence of the peptide-diacetylene amphiphiles is quenched. Interaction with LPS in aqueous solution or on the surface of E. coli DH5α restores the fluorescence. This increase in fluorescence is selective for LPS relative to other negatively charged analytes including nucleotides and ctDNA. This simple turn-on fluorescent sensor allows detecting LPS even at low micromolar concentrations.     

Atomic force microscopy of model lipid membranes

Supported lipid bilayers (SLBs) are biomimetic model systems that are now widely used to address the biophysical and biochemical properties of biological membranes. Two main methods are usually employed to form SLBs: the transfer of two successive monolayers by Langmuir–Blodgett or Langmuir–Schaefer techniques, and the fusion of preformed lipid vesicles. The transfer of lipid films on flat solid substrates offers the possibility to apply a wide range of surface analytical techniques that are very sensitive. Among them, atomic force microscopy (AFM) has opened new opportunities for determining the nanoscale organization of SLBs under physiological conditions. In this review, we first focus on the different protocols generally employed to prepare SLBs. Then, we describe AFM studies on the nanoscale lateral organization and mechanical properties of SLBs. Lastly, we survey recent developments in the AFM monitoring of bilayer alteration, remodeling, or digestion, by incubation with exogenous agents such as drugs, proteins, peptides, and nanoparticles.

Recruitment of receptors at supported lipid bilayers promoted by the multivalent binding of ligand-modified unilamellar vesicles

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a better understanding of biomolecular processes, such as the recruitment of receptors at interfaces, at the molecular level. Here we report a model system based on supported lipid bilayers (SLBs) for the investigation of the clustering of receptors at their interface. Biotinylated SLBs, used as cell membrane mimics, were functionalized with streptavidin (SAv), used here as receptor. Subsequently, biotinylated small (SUVs) and giant (GUVs) unilamellar vesicles were bound to the SAv-functionalized SLBs by multivalent interactions and found to induce the recruitment of both SAv on the SLB surface and the biotin moieties in the vesicles. The recruitment of receptors was investigated with quartz crystal microbalance with dissipation monitoring (QCM-D), which allowed the identification of the biotin and SAv densities necessary to obtain receptor recruitment. At approx. 0.6% of biotin in the vesicles, a transition between dense and low vesicle packing was observed, which coincided with the transitions between recruitment in the vesicles vs. recruitment in the SLB and between full and partial use of the biotin moieties in the vesicle. Direct optical visualization of the clustering at the interface of individual GUVs with the SLB platform was achieved with fluorescence microscopy, showing recruitment of SAv at the contact area as well as the deformation of the vesicles upon binding. Different vesicle binding regimes were observed for lower and higher biotin densities in the vesicles and at the SLBs. A more quantitative analysis of the molecular parameters implied in the interaction, indicated that approx. 10% of the vesicle area constitutes the contact area. Moreover, the SUV binding and recruitment appeared to be fast on the analysis time scale, whereas the binding of GUVs is slower due to the larger SLB area over which SAv recruitment needs to occur. The mechanisms revealed in this study may provide insight in biological processes in which recruitment occurs.

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a molecular understanding of biomolecular processes, such as the recruitment of receptors at interfaces.     

Phospholipids Bilayers as Molecular Models for Drug- Membrane Interactions. The Case of the Antiepileptics Phenytoin and Carbamazepine

With the aim to better understand the molecular mechanisms of the interaction of phenytoin and carbamazepine with cell membranes we utilized a well-established model consisting in intact human erythrocytes, isolated unsealed human erythrocyte membranes (IUM) and molecular models of its membrane. The latter consisted of bilayers of dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidyl-ethanolamine (DMPE), representative of phospholipid classes respectively located in the outer and inner monolayers of erythrocytes and other cell membranes. This report presents the following evidence that phenytoin and carbamazepine interact with membrane phospholipids: a) X-ray diffraction and fluorescence spectroscopy showed that both drugs preferentially interacted with DMPC; b) in IUM, the drugs induced a disordering effect on the polar head groups and acyl chains of the eryhrocyte membrane lipid bilayers; c) electron microscopy observations of human erythrocytes showed the echinocyte formation, an effect due to phenytoin and carbamazepine insertion in the outer monolayer of the red cell membrane.     

Formation of solid-supported lipid bilayers: an integrated view

Supported lipid bilayers (SLBs) are popular models of cell membranes with potential bio-technological applications. A qualitative understanding of the process of SLB formation after exposure of small lipid vesicles to a hydrophilic support is now emerging. Recent studies have revealed a stunning variety of effects that can take place during this self-organization process. The ensemble of results in our group has revealed unprecedented insight into intermediates of the SLB-formation process and has helped to identify a number of parameters that are determinant for the lipid deposition on solid supports. The pathway of lipid deposition can be tuned by electrostatic interactions and by the presence of calcium. We emphasize the importance of the solid support in the SLB-formation process. Our results suggest that the molecular-level interaction between lipids and the solid support needs to be considered explicitly, to understand the rupture of vesicles and the formation of SLBs as well as to predict the properties of the resulting SLB. The impact of the SLB-formation process on the quality and the physical properties of the resulting SLB as well as implications for other types of surface-confined lipid bilayers are discussed.     

Interaction of Polystyrene Nanoparticles with Supported Lipid Bilayers: Impact of Nanoparticle Size and Protein Corona

Polystyrene is one of the most widely used plastics. This article reports on the interaction of 50 and 210 nm polystyrene nanoparticles (PSNPs) with human serum albumin (HSA) and transferrin (Tf), as well as their effect on supported lipid bilayers (SLBs), using experimental and theoretical approaches. Dynamic light scattering (DLS) and atomic force microscopy (AFM) measurements show that the increase in diameter for the PSNP-protein bioconjugates depends on nanoparticle size and type of proteins. The circular dichroism (CD) spectroscopy results demonstrate that the proteins preserve their structures when they interact with PSNPs at physiological temperatures. The quartz crystal microbalance (QCM) technique reveals that PSNPs and their bioconjugates show no strong interactions with SLBs. On the contrary, the molecular dynamics simulations (MDS) show that both proteins bind strongly to the lipid bilayer (SLBs) when compared to their binding to a polystyrene surface model. The interaction is strongly dependent on the protein and lipid bilayer composition. Both the PSNPs and their bioconjugates show no toxicity in human umbilical vein endothelial (HUVEC) cells; however, bare 210 nm PSNPs and 50 nm PSNP-Tf bioconjugates show an increase in reactive oxygen species production. This study may be relevant for assessing the impact of plastics on health.     

Supported lipid bilayer microarrays created by non-contact printing

Arrays of supported lipid bilayers (SLBs) provide great potential for future drug development and multiplexed biological research, but are difficult to prepare due to the sensitivity of both the lipid and protein structural arrangement to air exposure. A novel way to produce arrays of SLBs is presented based on non-contact dispensing of vesicles to a substrate through a thin surface confined water film. The approach presents many degrees of freedom since it is not limited to a specific substrate, lipid composition, linker or controlled environment. The method allows adjustment of spot size (180-360 μm) by repeated dispensing as well as control over the composition of the spots and subsequent analytes. SLB formation by vesicle adsorption and rupture allows for incorporation of membrane proteins through pre-formed proteoliposomes. Dispensing through a dip-and-rinse water film avoids contamination, disruptive drying and the need for complex buffer compositions. Furthermore, no humidity control is necessary which simplifies the production step and prolongs the life-time of the spotting system. We characterize the method with respect to control over spot size, bilayer mobility and the formation process as well as demonstrate the possibility to fuse bilayer spots with subsequently added vesicles. Since complex lipid compositions and multiple spotting nozzles can be used, this novel technique is expected to be a promising platform for future applications, e.g. patterning to monitor peptide/protein-lipid interactions, for glycomics using glycolipids or lipopolysaccharides, and to study mixing of spatially confined lipid membranes.     

Supported lipid bilayer nanosystems: stabilization by undulatory-protrusion forces and destabilization by lipid bridging

Control of the stabilization/destabilization of supported lipid bilayers (SLBs) on nanoparticles is important for promotion of their organized assembly and for their use as delivery vehicles. At the same time, understanding the mechanism of these processes can yield insight into nanoparticle-cell interactions and nanoparticle toxicity. In this study, the suspension/precipitation process of zwitterionic lipid/SiO(2) nanosystems was analyzed as a function of ionic strength and as a function of the ratio of lipid/SiO(2) surface areas, at pH = 7.6. Salt is necessary to induce supported lipid bilayer (SLB) formation for zwitterionic lipids on silica (SiO(2)) (Seantier, B.; Kasemo, B., Influence of Mono- and Divalent Ions on the Formation of Supported Phospholipid Bilayers via Vesicle Adsorption. Langmuir 2009, 25 (10), 5767-5772). However, for zwitterionic SLBs on SiO(2) nanoparticles, addition of salt can cause precipitation of the SLBs, due to electrostatic shielding by both the lipid and the salt and to the suppression of thermal undulation/protrusion repulsive forces for lipids on solid surfaces. At ionic strengths that cause precipitation of SLBs, it was found that addition of excess SUVs, at ratios where there were equal populations of SUVs and SLBs, restored the undulation/protrusion repulsive forces and restabilized the suspensions. We suggest that SUVs separate SLBs in the suspension, as observed by TEM, and that SLB-SLB interactions are replaced by SLB-SUV interactions. Decreasing the relative amount of lipid, to the extent that there was less lipid available than the amount required for complete bilayer coverage of the SiO(2), resulted in precipitation of the nanosystem by a process of nanoparticle lipid bridging. For this case, we postulate a process in which lipid bilayer patches on one nanoparticle collide with bare silica patches on another SiO(2) nanoparticle, forming a single bilayer bridge between them. TEM data confirmed these findings, thus indicating that lipid bridges are composed of half bilayers on adjoining SiO(2) nanoparticles.     

Model cell membranes: Techniques to form complex biomimetic supported lipid bilayers via vesicle fusion

Vesicle fusion has long provided an easy and reliable method to form supported lipid bilayers (SLBs) from simple, zwitterionic vesicles on siliceous substrates. However, for complex compositions, such as vesicles with high cholesterol content and multiple lipid types, the energy barrier for the vesicle-to-bilayer transition is increased or the required vesicle–vesicle and vesicle–substrate interactions are insufficient for vesicle fusion. Thus, for vesicle compositions that more accurately mimic native membranes, vesicle fusion often fails to form SLBs. In this paper, we review three approaches to overcome these barriers to form complex, biomimetic SLBs via vesicle fusion: (i) optimization of experimental conditions (e.g., temperature, buffer ionic strength, osmotic stress, cation valency, and buffer pH), (ii) α-helical (AH) peptide-induced vesicle fusion, and (iii) bilayer edge-induced vesicle fusion. AH peptide-induced vesicle fusion can form complex SLBs on multiple substrate types without the use of additional equipment. Bilayer edge-induced vesicle fusion uses microfluidics to form SLBs from vesicles with complex composition, including vesicles derived from native cell membranes. Collectively, this review introduces vesicle fusion techniques that can be generalized for many biomimetic vesicle compositions and many substrate types, and thus will aid efforts to reliably create complex SLB platforms on a range of substrates.     

Novel "lipid-flow chip" configuration to determine donor-to-acceptor ratio-dependent fluorescence resonance energy transfer efficiency

We report on the determination of fluorescence resonance energy transfer (FRET) efficiency, which is dependent on the donor-to-acceptor (D-A) ratio, by using a new type of microchannel device called a "lipid-flow chip". The chip comprises two supported lipid bilayers (SLBs) that self-spread from either side of 10 microm wide straight lines and carry molecules embedded in them. We first show that the diffusion process that occurs when the two SLBs collide with each other in the channel and form a unified SLB can be expressed by a one-dimensional diffusion equation. Next we describe a method for determining the FRET efficiency between NBD (donor) and Texas Red (acceptor) from observations using the lipid-flow chip by employing a one-dimensional diffusion model. The advantages of our method are that all the D-A ratios are achieved in one chip, and a large number of data are recorded in one chip. The FRET efficiency varies depending on the D-A ratio under conditions whereby the concentration of the sum of the donors and acceptors is constant. The F?rster radius is also estimated from our results using a known model describing two-dimensional FRET systems, which yields a radius consistent with the previously reported value for NBD and Texas Red.