Self-assembly of organic monolayers on aerosolized silicon nanoparticles

A new method is described for surface functionalization of silicon nanocrystals. Organic monolayers were self-assembled via gas-phase adsorption of amines, alkenes, alkynes, and aldehydes onto the surfaces of aerosolized crystalline silicon nanoparticles of 12.2 nm diameter in an atmospheric pressure tube reactor. Assembly took place within 4 s at temperatures between 200 and 500 degrees C. The extent of adsorption was measured by using tandem differential mobility analysis (T-DMA), an on-line diagnostic method for measuring changes in particle size. Functionalized particles were further characterized by high-resolution transmission electron microscopy and diffuse reflectance Fourier transform infrared spectroscopy. The apparatus described in this work can be used for continuous mass production of functionalized silicon nanoparticles. Moreover, the overall strategy of using T-DMA for monitoring monolayer uptake could be generally applied to study surface processing of other aerosolized nanoparticle systems.     

First reaction of a bare silicon surface with acid chlorides and a one-step preparation of acid chloride terminated monolayers on scribed silicon

Methyl-terminated and acyl chloride terminated monolayers are produced when silicon is scribed under mono- and diacid chlorides, respectively. To the best of our knowledge, this is the first report of the reaction between a bare silicon surface and acid chlorides. This reaction takes place by wetting the silicon surface in the air with the acid chloride and scribing. Scribing activates the silicon surface by removing its passivation layer. We propose that scribed silicon abstracts chlorine from an acid chloride to form an Si-Cl bond and that the resulting acyl radical diffuses back to the surface to condense with the surface and form an alkyl monolayer. X-ray photoelectron spectroscopy (XPS) confirms the presence of chlorine and shows a steady increase in the amount of carbon with increasing alkyl chain lengths of the acid chlorides. Time-of-flight secondary ion mass spectrometry shows SiCl(+) species and a steady increase in representative hydrocarbon fragments with increasing alkyl chain lengths of the acid chlorides. XPS indicates that diacid chlorides react primarily at one of their ends to create acyl chloride terminated surfaces in a single step. The resulting surfaces are shown to react with various amines (piperazine, morpholine, and octylamine) and a protein. Calculations at Hartree-Fock and density functional theory levels are consistent with the proposed mechanism.     

Self-assembly of alkanethiol monolayers on Ag-Au(111) alloy surfaces

The self-assembly of ethanethiol (C(2)) and 1-octanethiol (C(8)) on Ag-Au(111) alloy films was studied by X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and scanning tunneling microscopy (STM), to illuminate how the monolayer structures and chemisorption-induced substrate defect structures depend on the alloy composition. The thiolate packing density at saturation increased approximately linearly with increasing Ag ratio. The CV data for reductive desorption of thiolates evidenced predominant or major contributions of Ag atoms to the substrate-sulfur interactions for the alloy surfaces. The STM study supported the lack of elemental periodicity on Ag-Au(111) and the consequent absence of periodicity in substrate-sulfur bonding. For C(8)-covered films, we observed systematic changes of substrate defect structures from elevated monatomic islands on Ag(111) to vacancy island structure on Au(111), in good correlation with the reductive desorption characteristics. The former type of defects can be explained best in terms of breakup of atomic terraces under excess thiolate packing density for Ag(111) and Ag-rich Ag-Au(111). As for the vacancy island formation, the present results are not agreeable with the chemical etching model but compatible with the lattice relaxation model.     

Influence of surface hierarchy of superhydrophobic surfaces on liquid slip

We investigated how the surface hierarchy of superhydrophobic (SHPo) surfaces influences liquid slip by testing well-defined microposts that have nanoposts only on their top. Contrary to the commonly held belief, our results show that such hierarchical surfaces do not always lead to an increase of slip length despite their reduced solid fraction and enhanced hydrophobicity compared to single-scale surfaces. Adding nanoposts on top of the microposts resulted in an increase of slip length only if the original microposts had a solid fraction above a threshold value. For solid fractions below this threshold, adding nanoposts decreased the slip length. We propose that there were not enough nanoposts on the top surface of very thin microposts to support the liquid pressure, allowing the liquid to intrude down to the top corners of the microposts.     

Molecular printboards: monolayers of beta-cyclodextrins on silicon oxide surfaces

Monolayers of beta-cyclodextrin host molecules have been prepared on SiO2 surfaces. An ordered and stable cyano-terminated monolayer was modified in three consecutive surface reactions. First, the cyanide groups were reduced to their corresponding free amines using Red Al as a reducing agent. Second, 1,4-phenylene diisothiocyanate was used to react with the amine monolayer where it acts as a linking molecule, exposing isothiocyanates that can be derivatized further. Finally, per-6-amino beta-cyclodextrin was reacted with these isothiocyanate functions to yield a monolayer exposing beta-cyclodextrin. All monolayers were characterized by contact angle measurements, ellipsometric thickness measurements, Brewster angle Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry, which indicate the formation of a densely packed cyclodextrin surface. It was demonstrated that the beta-cyclodextrin monolayer could bind suitable guest molecules in a reversible manner. A fluorescent molecule (1), equipped with two adamantyl groups for complexation, was adsorbed onto the host monolayer from solution to form a monolayer of guest molecules. Subsequently, the guest molecules were desorbed from the surface by competition with increasing beta-cyclodextrin concentration in solution. The data were fitted using a model. An intrinsic binding constant of 3.3 +/- 1 x 10(5) M(-1) was obtained, which corresponds well to previously obtained results with a divalent guest molecule on beta-cyclodextrin monolayers on gold. In addition, the number of guest molecules bound to the host surface was determined, and a surface coverage of ca. 30% was found.     

Biomolecule and nanoparticle transfer on patterned and heterogeneously wetted superhydrophobic silicon nanowire surfaces

We report on the use of patterned superhydrophobic silicon nanowire surfaces for the efficient, selective transfer of biological molecules and nanoparticles. Superhydrophilic patterns are prepared on superhydrophobic silicon nanowire surfaces using standard optical lithography. The resulting water-repellent surface allows material transfer and physisorption to the superhydrophilic islands upon exposure to an aqueous solution containing peptides, proteins, or nanoparticles.     

High surface water interaction in superhydrophobic nanostructured silicon surfaces: convergence between nanoscopic and macroscopic scale phenomena

In the present work, we investigate wetting phenomena on freshly prepared nanostructured porous silicon (nPS) with tunable properties. Surface roughness and porosity of nPS can be tailored by controlling fabrication current density in the range 40-120 mA/cm(2). The length scale of the characteristic surface structures that compose nPS allows the application of thermodynamic wettability approaches. The high interaction energy between water and surface is determined by measuring water contact angle (WCA) hysteresis, which reveals Wenzel wetting regime. Moreover, the morphological analysis of the surfaces by atomic force microscopy allows predicting WCA from a semiempiric model adapted to this material.     

Reversible covalent patterning of self-assembled monolayers on gold and silicon oxide surfaces

This paper describes the generation of reversible patterns of self-assembled monolayers (SAMs) on gold and silicon oxide surfaces via the formation of reversible covalent bonds. The reactions of (patterned) SAMs of 11-amino-1-undecanethiol (11-AUT) with propanal, pentanal, decanal, or terephthaldialdehyde result in dense imine monolayers. The regeneration of these imine monolayers to the 11-AUT monolayer is obtained by hydrolysis at pH 3. The (patterned) monolayers were characterized by Fourier transform infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, contact angle and electrochemical measurements, and atomic force microscopy. Imines can also be formed by microcontact printing of amines on terephthaldialdehyde-terminated substrates. Lucifer Yellow ethylenediamine was employed as a fluorescent amine-containing marker to visualize the reversible covalent patterning on a terephthaldialdehyde-terminated glass surface by confocal microscopy. These experiments demonstrate that with reversible covalent chemistry it is possible to print and erase chemical patterns on surfaces repeatedly.     

Screening and surface states in molecular monolayers adsorbed on silicon

We performed density functional theory calculations of the atomic and electronic structure of a dense monolayer of phenyl-terminated alkyl chains chemisorbed onto the (100) Si surface. Different adsorption sites were characterized for both the pristine and (2 x 1) reconstructed surface. A strong effect on the ordering and alignment of the molecular energy levels with respect to the Fermi level of silicon is observed, consequent to intermolecular screening in the monolayer and of the appearance of surface localized states, as a function of the different bonding arrangements. Some possible consequences of these findings are discussed in the framework of the experimental synthesis of such monolayers as molecular current rectifiers in silicon-integrated nanoscale electronics.     

Fluorescent nanoparticle adhesion assay: a novel method for surface pKa determination of self-assembled monolayers on silicon surfaces

Since the computer industry enables us to generate smaller and smaller structures, silicon surface chemistry is becoming increasingly important for (bio-)analytical and biological applications. For controlling the binding of charged biomacromolecules such as DNA and proteins on modified silicon surfaces, the surface pK(a) is an important factor. Here we present a fluorescent nanoparticle adhesion assay as a novel method to determine the surface pK(a) of silicon surfaces modified with weak acids or bases. This method is based upon electrostatic interactions between the modified silicon surface and fluorescent nanoparticles with an opposite charge. Silicon slides were modified with 3-aminopropyltriethoxysilane (APTES) and were further derivatized with succinic anhydride. Layer thickness of these surfaces was determined by ellipsometry. After incubating the surfaces with an amine-reactive fluorescent dye, fluorescence microscopy revealed that the silicon surfaces were successfully modified with amine- and carboxyl-groups. Two surface pK(a) values were found for APTES surfaces by the fluorescent nanoparticle adhesion assay. The first surface pK(a) (6.55 ± 0.73) was comparable with the surface pK(a) obtained by contact angle titration (7.3 ± 0.8), and the second surface pK(a) (9.94 ± 0.19) was only found by using the fluorescent nanoparticle adhesion assay. The surface pK(a) of the carboxyl-modified surface by the fluorescent nanoparticle adhesion assay (4.37 ± 0.59) did not significantly differ from that found by contact angle titration (5.7 ± 1.4). In conclusion, we have developed a novel method to determine the surface pK(a) of modified silicon surfaces: the fluorescent nanoparticle adhesion assay. This method may provide a useful tool for designing pH-dependent electrostatic protein and particle binding/release and to design surfaces with a pH-dependent surface charge for (bio-)analytical lab-on-a-chip devices or drug delivery purposes.     

若干多氮硒杂环化合物在金表面的自组装及其电化学性质

研究了1,2,5-硒二唑并[3,4-b]吡啶（SPb）,1,2,5-硒二唑并[3,4-d]嘧啶-7-（5H,6H）酮（SPO）,1,2,5．硒二唑并[3,4．d]嘧啶-5,7-（4H,6H）二酮（SPDO）等多氮硒杂环化合物在溶液中及其在金表面的自组装单分子膜的电化学性质。以Fe（CN）6^3-/4-为离子探针,利用CV法观察了Fe（CN）6^3-/4-氧化还原峰的变化。结果表明,在溶液中,电极过程主受吸附控制;自组装膜的电化学信号与其溶液相似,在-600mV左右都有一还原峰,表明该类化合物有相似的组装模式,其中SPO和SPDO在金表面形成了致密的单分子膜,有效地封闭了表面与溶液之间的电子交换和传递。     

Self-assembled monolayers of alkanoic acids on the native oxide surface of SS316L by solution deposition

Stainless steel 316L is a widely used biomaterial substrate whose biocompatibility could be improved by surface modification. As a first step in this process, self-assembled monolayers of octanoic acid, octadecylcarboxylic acid, 16-hydroxyhexadecanoic acid, 12-aminododecanoic acid, and 1,12-dodecane dicarboxylic acid have been formed on the native oxide surface of stainless steel 316L by a simple, one-step solution deposition method. The ordering, close-packing, and coverage of the monolayers formed were characterized by diffuse reflectance infrared spectroscopy, contact angle measurements, and atomic force microscopy. The same procedure was applicable for all long alkyl chain carboxylic acids. This process formed chemically and mechanically stable monolayers. These carboxylic acids formed a bidentate bond with the stainless steel substrate. Robust chemical attachment of the acids to stainless steel through a simple process provides a stepping stone to improving the biocompatibility of stainless steel 316L.     

Effect of surface morphology on measurement and interpretation of boundary slip on superhydrophobic surfaces

Highly liquid repellent surfaces have been obtained by the combination of roughness and hydrophobicity. Studies have reported that the flow over such surfaces exhibits larger boundary slip as compared to the smooth hydrophobic surfaces. However, the surface roughness can also lead to apparent slip. Thus, the effect of the two factors, that is, wettability and roughness, needs to be segregated. In this study, we have measured the slippage of water on rough hydrophilic and hydrophobic surfaces using colloidal probe atomic force microscopy technique (CP‐AFM). Results showed that the effect of surface roughness on the measured slip is dominant over that of wettability. It was also found that slip on surfaces with sparsely distributed asperities is highly local and measurements on various locations give dissimilar results. The results suggested that the main reason of the larger slip, on rough hydrophobic surfaces, is likely to be the roughness and not the hydrophobicity. Moreover, it was also found that the slip does not vary considerably with the increase or decrease in the shear rate. Most likely, this kind of slip phenomena is caused by the apparent decrease of the drag force, because the nanoasperities on the surface restrict the probe from reaching the surface properly. Copyright © 2016 John Wiley & Sons, Ltd.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Self-assembly, characterization, and chemical stability of isocyanide-bound molecular wire monolayers on gold and palladium surfaces

Self-assembled monolayers (SAMs) of the isocyano derivative of 4,4'-di(phenylene-ethynylene)benzene (1), a member of the "OPE" family of "molecular wires" of current interest in molecular electronics, have been prepared on smooth, {111} textured films of Au and Pd. For assembly in oxygen-free environments with freshly deposited metal surfaces, infrared reflection spectroscopy (IRS) indicates the molecules assume a tilted structure with average tilt angles of 18-24 degrees from the surface normal. The combination of IRS, X-ray photoelectron spectroscopy, and density functional theory calculations all support a single sigma-type bond of the -NC group to the Au surface and a sigma/pi-type of bond to the Pd surface. Both SAMs show significant chemical instability when exposed to typical ambient conditions. In the case of the Au SAM, even a few hours storage in air results in significant oxidation of the -NC moieties to -NCO (isocyanate) with an accompanying decrease in surface chemical bonding, as evidenced by a significant increase in instability toward dissolution in solvent. In the case of the Pd SAM, similar air exposure does not result in incorporation of oxygen or loss of solvent resistance but rather results in a chemically altered interface which is attributed to polymerization of the -NC moieties to quasi-2D poly(imine) structures. Conductance probe atomic force microscope measurements show the conductance of the degraded Pd SAMs can diminish by approximately 2 orders of magnitude, an indication that the SAM-Pd electrical contact has severely degraded. These results underscore the importance of careful control of the assembly procedures for aromatic isocyanide SAMs, particularly for applications in molecular electronics where the molecule-electrode junction is critical to the operational characteristics of the device.     

Reversible photocontrol of surface wettability between hydrophilic and superhydrophobic surfaces on an asymmetric diarylethene solid surface

By alternate UV and visible light irradiation, reversible topographical changes were observed on a newly synthesized diarylethene microcrystalline surface between the rough crystalline surface of an open-ring isomer and flat eutectic surfaces. The contact angle changes of a water droplet between 80° and 150° and peak intensities changes of the open-ring isomer in XRD patterns within 2 h of repeating cycle were observed. The results indicated that reversibly photogenerated rod-shaped crystals on the surface were produced based on the lattice of the open-ring isomer crystals in the subphase.     

Self-assembly of thin film superstructures based on alternating metal-bisphosphonate and cobalt-diisocyanide layers

A new chemical strategy for the synthesis of self-assembled (SA) multilayer superstructures is described which allows facile incorporation of aligned nonlinear optical (NLO) chromophores. This strategy involves alternating layers of the well-established metal-bisphosphonate system with layers of the recently reported cobalt-diisocyanide SA system. Previously, building SA multilayers with oriented NLO chromophores has required extra activation or deprotection steps that are time consuming and which often involve harsh chemical treatments. Several results showing the feasiblity of the new approach are presented. A film incorporating the desired chemistries was synthesized and characterized by ellipsometry. Control experiments demonstrating the necessary metal-ligand binding specificity (cobalt with isocyanide versus hafnium with phosphonate ligands) are reported. Cobalt-diisocyanohexane films exhibiting alkyl-isocyanide-cobalt linkages are reported for the first time, including characterization by ellipsometry and grazing angle X-ray diffraction. Thus, both alkyl- and aryl-isocyanide functionalities in cobalt-isocyanide multilayers have now been shown to be feasible components of the proposed supramolecular structures. Finally, preliminary second harmonic generation data are presented, demonstrating the potential utility of the materials.     

One-step photochemical attachment of NHS-terminated monolayers onto silicon surfaces and subsequent functionalization

N-Hydroxysuccinimide (NHS)-ester-terminated monolayers were covalently attached in one step onto silicon using visible light. This mild photochemical attachment, starting from omega-NHS-functionalized 1-alkenes, yields a clean and flat monolayer-modified silicon surface and allows a mild and rapid functionalization of the surface by substitution of the NHS-ester moieties with amines at room temperature. Using a combination of analytical techniques (infrared reflection absorption spectroscopy (IRRAS), extensive X-ray photoelectron spectroscopy (XPS) in combination with density functional theory calculations of the XPS chemical shifts of the carbon atoms, atomic force microscopy (AFM), and static contact angle measurements), it was shown that the NHS-ester groups were attached fully intact onto the surface. The surface reactivity of the NHS-ester moieties toward amines was qualitatively and quantitatively evaluated via the reaction with para-trifluoromethyl benzylamine and biotin hydrazide.     

Multiple transmission-reflection infrared spectroscopy for high-sensitivity measurement of molecular monolayers on silicon surfaces

A new infrared spectroscopic measurement involving multiple transmissions and reflections for molecular monolayers adsorbed on silicon surfaces has been established. Compared to the well-known multiple internal reflection (MIR) method, the distinctive advantage of multiple transmission-reflection infrared spectroscopy (MTR-IR) is the convenient measurement using standard silicon wafers as samples, while in the MIR setup special fabrication of geometric shapes such as 45 degrees bevel cuts on an attenuated total reflection silicon crystal is needed. Both p- and s-polarized spectra can be obtained reproducibly with the same order of sensitivity as by the MIR spectroscopy. Optimal conditions for spectral acquisition have been obtained from theoretical calculations. The ability of this methodology to gather high quality infrared spectra of adsorbed monolayers is demonstrated and the analysis of the surface packing and molecular orientation is discussed.     

Effects of surface hydrophobization on the growth of self-assembled monolayers on silicon

The growth of self-assembled monolayers from octadecyltrichlorosilane (OTS) on modified silicon surfaces has been investigated. The influence of different immersion times in a deactivation reagent on the growth mechanism and the ordering of the films has been studied. Characterization of the films and the submonolayer coverage has been performed with tapping mode atomic force microscopy, ellipsometry, and infrared spectroscopy. We found that a deactivation of active sites led to a higher mobility of adsorbed molecules on the surface resulting in circular islands of highly ordered alkylsiloxane. However, upon prolonged immersion in OTS these ordered islands did not continue to grow and full monolayer coverage could not be obtained. Instead, an exchange reaction with the deactivation reagent leading to a disordered film between the ordered islands was observed. This was confirmed by external reflection infrared spectroscopy.