基于微流控芯片的色谱系统的研究进展及其应用

近年来,基于微流控芯片的色谱技术研究取得了快速发展。本文对微流控芯片上色谱柱的加工方法、泵阀驱动控制装置的设计、集成及联用色谱系统的研制及其应用等方面予以综述,涉及文献66篇。     

A double plasma gas chromatography injector and detector

A direct-current, chip-based plasma has been used for gas sample injection in gas chromatography. A second identical plasma chip has been used as the excitation source for an optical emission detector. The first plasma is normally continually sustained during operation, causing continuous ionisation/fragmentation of the sample, whilst the second plasma records the optical emission downstream. For injection, the first plasma is briefly interrupted, introducing a "plug" of unmodified sample into the system. Injection plug sizes of between 5 and 50 [micro sign]l have been reproducibly obtained, although significantly smaller volumes may be possible with the use of smaller cross-section columns, lower flow rates and/or shorter plasma interruption times.     

Microfluidic sequential injection analysis system based on polydimethylsiloxane (PDMS) chip with integrated pneumatic-actuated valves

A sequential injection analysis (SIA) system based on polydimethylsiloxane (PDMS) chip with integrated pneumatic-actuated valves was developed. A novel SIA operation mode using multiphase laminar flow effect and pneumatic microvalve control was proposed. The sample and reagent solutions were synchronously loaded and injected in the chip-based sample injection module instead of multi-step sequential injection by a multiposition valve and a reciprocating pump as in conventional SIA system. The sample and reagent injection volumes were reduced to ca. 1.1 nL. The present system has the advantages of simple structure, fast and convenient operation, low sample and reagent consumption, and high degree of integration and automation. The system operation conditions were optimized using fluorescein as model sample. Its feasibility in biological analysis was preliminarily demonstrated in enzyme inhibition assay.     

A chip-based immunoaffinity capillary electrophoresis assay for assessing hormones in human biological fluids

A chip-based capillary electrophoresis system has been designed for assessing the concentrations of four hormones in whole human blood, saliva, and urine. The desired analytes were isolated by immunoextraction using a panel of four analyte-specific antibodies immobilized onto a glass fiber insert within the injection port of the chip. Following extraction, the captured analytes were labeled prior to electro-elution into the chip separation channel, where they were resolved into four individual peaks in circa 2 min. Quantification of each peak was achieved by on-line LIF detection and integration of the area under each peak. Comparison to commercial high-sensitivity immunoassays demonstrated that the chip-based assay provided fast, accurate, and precise measurements for the analytes under investigation. As the availability of commercially available antibodies rapidly expands, the application of this system will greatly increase. Chip-based CE separations of multiple analytes from a single sample also provide a significant advantage in the analysis of small samples.     

微流控芯片流动注射气体扩散分离光度测定系统的研究

提出了纳升级进样量的微流控芯片流动注射气体扩散分离光度检测系统. 制作三层结构微流控芯片, 在玻璃片上加工微反应通道, 用聚二甲基硅氧烷[Poly(dimethylsiloxane), PDMS]加工气体渗透膜和具有接收气体微通道的底片, 实现了生成气体的化学反应、气-液分离和检测在同一微芯片上的集成化. 采用缝管阵列纳升流动注射进样系统连续进样, 用吸光度法测定NH+4以验证系统性能. 结果表明， 该系统对NH+4的检出限为140 μmol/L(3σ), 峰高精度为3.7%(n=9). 在进样时间12 s、注入载流48 s和每次进样消耗200 nL试样条件下, 系统分析通量可达60样/h. 若加大样品量到800 nL, 使接收溶液停流1 min, 该系统对NH+4的检出限可达到35 μmol/L(3σ), 但分析通量降低到20样/h.     

Design and fabrication of cell alignment device based on electrolytically-generated air bubbles, and its practical realization using polystyrene microbeads

For future medical diagnostics and drug screening, chip-based single cell analysis based on a micro-electro-mechanical system (MEMS) technology will be essential. Chip-based single cell analysis enables to perform exhaustive analysis of huge numbers of sample cells, reducing sample volume and analysis time and lowering the costs. However, the previously reported chip-based single cell analysis has some disadvantages of cell alignment, such as troublesome sample handling and long cell alignment time onto the chip. In this study, a cell alignment method and device based on electrically-generated air bubbles is presented. For practical realization, the cell alignment was carried out using microbeads. With this technique, the chip-based single cell analysis will be more simplified for medical and drug delivery applications.     

Convenient enantioseparation by monolithic imprinted capillary clamped in a chip with electrochemical detection

A microchip integrated with a monolithic imprinted capillary has been manufactured for performing the chip-based capillary electrochromatographic enantioseparation. The microporous monolith anchored on the inner wall of the microchannel was prepared by in situ chemical copolymerization, and characterized with scanning electron microscopy, IR spectroscopy, and solid-state UV-vis spectroscopy. The monolithic network with high porosity gave a large surface area, good permeability, low mass-transfer resistance, and thus high separation efficiency. A portable microchip was conveniently constructed by integrating an imprinted capillary with 5-cm length as the separation channel and a carbon fiber microdisk working electrode for amperometric detection. Using L-tyrosine (L-Tyr) as the template molecule, Tyr enantiomers could be baseline separated within 55 s under the optimized preparation and separation conditions. The linear ranges for online amperometric detection of both Tyr enantiomers were from 20 to 2400 μM. The microporous monolithic chip strategy exhibited excellent separation efficiency and promising analytical application in enantioseparation. It opens an avenue for high-throughput screening of chiral compounds.     

A microchip-based flow injection-amperometry system with mercaptopropionic acid modified electroless gold microelectrode for the selective determination of dopamine

A novel chip-based flow injection analysis (FIA) system has been developed for automatic, rapid and selective determination of dopamine (DA) in the presence of ascorbic acid (AA). The system is composed of a polycarbonate (PC) microfluidic chip with an electrochemical detector (ED), a gravity pump, and an automatic sample loading and injection unit. The selectivity of the ED was improved by modification of the gold working microelectrode, which was fabricated on the PC chip by UV-directed electroless gold plating, with a self-assembled monolayer (SAM) of 3-mercaptopropionic acid (MPA). Postplating treatment methods for cleaning the surface of electroless gold microelectrodes were investigated to ensure the formation of high quality SAMs. The effects of detection potential, flow rate, and sampling volume on the performance of the chip-based FIA system were studied. Under optimum conditions, a detection limit of 74 nmol L⁻¹ for DA was achieved at the sample throughput rate of 180 h⁻¹. A RSD of 0.9% for peak heights was observed for 19 runs of a 100 μmol L⁻¹ DA solution. Interference-free determination of DA could be conducted if the concentration ratio of AA–DA was no more than 10.     

Capillary electrochromatography of peptides on a column packed with tentacular weak cation-exchanger particles

Silica-based, tentacular weak cation-exchanger particles were prepared for use as the stationary phase in the separation of positively charged sample components by capillary electrochromatography (CEC). Silica beads were first silanized with 3-(trimethoxysilyl) propyl methacrylate that served as a heterobifunctional linker, which reacted with 2-acrylarmidoglycolic acid in a second step by radical polymerization in aqueous solution. Baseline separation of basic peptides with good column efficiency was obtained on packed capillary columns by isocratic elution CEC with NaCl as the mobile phase modulator. The retention mechanism in the electrochromatographic process was studied by examining the effect of salt concentration on the migration behavior of the peptides. The chromatographic retention factor k'(lc) for charged sample components in the electrochromatographic process was estimated on the assumption that the overall migration rate of a charged migrant can be taken as the sum of the rate of chromatographic elution and the rate of electrophoretic migration. The estimated k(lc) values from experimental results were plotted against the molal salt concentration on a double logarithmic scale. The linear correlation is in good agreement with the prediction by the theory on the basis of traditional ion-exchange chromatography. The comparison of CEC results, obtained with open tubular and packed capillary columns having the same retentive functions as the stationary phase, supports the notion that variation of the phase ratio in the column offers an additional means to modulate the electrochromatographic migration behavior.     

Functional integration of DNA purification and concentration into a real time micro-PCR chip

Microfluidic devices for on-chip amplification of DNA from various biological and environmental samples have gained extensive attention over the past decades with many applications including molecular diagnostics of disease, food safety and biological warfare testing. But the integration of sample preparation functions into the chip remains a major hurdle for practical application of the chip-based diagnostic system. We present a PCR-based molecular diagnostic device comprised of a microfabricated chip and a centrifugal force assisted liquid handling tube (CLHT) that is designed to carry out concentration and purification of DNA and subsequent amplification of the target gene in a single chip. The reaction chamber of the chip contains an array of pillar structures to increase the surface area for capturing DNA from a raw sample of macro volume in the presence of kosmotropic agents. The CLHT was designed to provide an effective interface between sample preparation and the microfluidic PCR chip. We have characterized the effect of various fluidic parameters including DNA capture, amplification efficiency and centrifugal pressure generated upon varying sample volume. We also evaluated the performance of this system for quantitative detection of E. coli O157:H7. From the samples containing 10(1) to 10(4) cells per mL, the C(T) value linearly increased from 25.1 to 34.8 with an R(2) value greater than 0.98. With the effectiveness and simplicity of operation, this system will provide an effective interface between macro and micro systems and bridge chip-based molecular diagnosis with practical applications.     

压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。     

Chip electrochromatography of polycyclic aromatic hydrocarbons on an acrylate-based UV-initiated porous polymer monolith

The first rigorous evaluation of a UV-initiated porous polymer monolith (PPM) as a stationary phase for chip electrochromatography (ChEC) is described. All channels in an offset T-injector-design-chip (25-microm deep by 50-microm wide channels) were filled by capillary action with an acrylate-based PPM precursor solution and polymerized in situ using 365 nm light for several minutes. Photodefinability of the monolith cast in the channels during the polymerization process was also demonstrated by masking off the injection arms during photoinitiation. The chromatographic performance of this chip was compared with that of chips completely filled with monolith. The detection window was photodefined after polymerization using the detection laser (257 nm doubled argon ion laser) to depolymerize the detection window. A successful ChEC separation of 10 out of 13 polycyclic aromatic hydrocarbons (PAH) was performed with on-column, off-packing laser-induced fluorescence detection at 257 nm. Van Deemter plots for early-, middle-, and late-eluting compounds showed the minimum plate height to be 5 microm. The average number of theoretical plates per meter for the PAH was 200,000. Several factors contributed to irreproducible results. Oxygen was observed to dynamically quench the fluorescence of the sample over time. Improved sealing of the reservoirs solved this problem. A within-chip variability in the retention time of 2-10% RSD was observed. These results demonstrate the feasibility and reliability of the PPM as a solid reversed-phase for electroosmotic flow-driven chip-based chromatography in microscale total analysis systems.     

Parallel separation of multiple samples with negative pressure sample injection on a 3-D microfluidic array chip

A simple and powerful microfluidic array chip-based electrophoresis system, which is composed of a 3-D microfluidic array chip, a microvacuum pump-based negative pressure sampling device, a high-voltage supply and an LIF detector, was developed. The 3-D microfluidic array chip was fabricated with three glass plates, in which a common sample waste bus (SW(bus)) was etched in the bottom layer plate to avoid intersecting with the separation channel array. The negative pressure sampling device consists of a microvacuum air pump, a buffer vessel, a 3-way electromagnet valve, and a vacuum gauge. In the sample loading step, all the six samples and buffer solutions were drawn from their reservoirs across the injection intersections through the SW(bus) toward the common sample waste reservoir (SW(T)) by negative pressure. Only 0.5 s was required to obtain six pinched sample plugs at the channel crossings. By switching the three-way electromagnetic valve to release the vacuum in the reservoir SW(T), six sample plugs were simultaneously injected into the separation channels by EOF and electrophoretic separation was activated. Parallel separations of different analytes are presented on the 3-D array chip by using the newly developed sampling device.     

The combination of liquid chromatography/tandem mass spectrometry and chip-based infusion for improved screening and characterization of drug metabolites

An approach has been developed for drug metabolism studies of non-radiolabeled compounds using on-line liquid chromatography/tandem mass spectrometry (LC/MS/MS) combined with chip-based infusion following fraction collection. The potential of this approach, which improves the data quality compared with only LC/MS analysis, has been investigated for the analysis of in vitro metabolites of tolcapone and talinolol, two compounds with well-characterized metabolism. The information-dependent LC/MS/MS analysis enables the characterization of the major metabolites while the chip-based infusion is used to obtain good product ion spectra for lower level metabolites, to generate complementary MS information on potential metabolites detected in the LC/MS trace, or to screen for unexpected metabolites. Fractions from the chromatographic analysis are collected in 20 second steps, into a 96-well plate. The fractions of interest can be re-analyzed with chip-based infusion on a variety of mass spectrometers including triple quadrupole linear ion trap (QqLIT or Q TRAP) and QqTOF systems. Acquiring data for several minutes using multi-channel acquisition (MCA), or signal averaging while infusing the fractions at approximately 200 nL/min, permits about a 50 times gain in sensitivity (signal-to-noise) in MS/MS mode. A 5-10 microL sample fraction can be infused for more than 30 min allowing the time to perform various MS experiments such as MS(n), precursor ion or neutral loss scans and accurate mass measurement, all in either positive or negative mode. Through fraction collection and infusion, a significant gain in data quality is obtained along with a time-saving benefit, because the original sample needs neither to be re-analyzed by re-injection nor to be pre-concentrated. Therefore, a novel hydroxylated talinolol metabolite could be characterized with only one injection.     

Novel multi-depth microfluidic chip for single cell analysis

A novel multi-depth microfluidic chip was fabricated on glass substrate by use of conventional lithography and three-step etching technology. The sampling channel on the microchip was 37 microm deep, while the separation channel was 12 microm deep. A 1mm long weir was constructed in the separation channel, 300 microm down the channel crossing. The channel at the weir section was 6 microm deep. By using the multi-depth microfluidic chip, human carcinoma cells, which easily aggregate, settle and adhere to the surface of the channel, can be driven from the sample reservoir to the sample waste reservoir by hydrostatic pressure generated by the difference of liquid level between sample and sample waste reservoirs. Single cell loading into the separation channel was achieved by applying a set of pinching potentials at the four reservoirs. The loaded cell was stopped by the weir and precisely positioned within the separation channel. The trapped cell was lysed by sodium dodecyl sulfate (SDS) containing buffer solution in 20s. This approach reduced the lysing time and improved the reproducibility of chip-based electrophoresis separations. Reduced glutathione (GSH) and reactive oxygen species (ROS) were used as model intracellular components in single human carcinoma cells, and the constituents were separated by chip-based electrophoresis and detected by laser-induced fluorescence (LIF). A throughput of 15 samples/h, a migration time precision of 3.1% RSD for ROS and 4.9% RSD for GSH were obtained for 10 consecutively injected cells.     

Rapid analysis of inflammatory cytokines in cerebrospinal fluid using chip-based immunoaffinity electrophoresis

A chip-based capillary electrophoresis system has been designed for rapidly measuring the concentrations of inflammatory cytokines in the cerebrospinal fluid of patients with head trauma. Isolation of the reactive cytokines was achieved by immunoaffinity capture using a panel of six immobilized antibodies, directly attached to the injection port of the chip. The captured cytokines were labeled in situ with a red light-emitting laser dye and electroeluted into the separation channel. Separation of the isolated cytokines was achieved by electrophoresis in under 2 min with quantification of the resolved peaks being achieved by on-line laser-induced fluorescence and integration of each peak area. Comparison of the results to commercially available high-sensitivity immunoassays demonstrates that the chip-based assay provides a fast, accurate procedure for studying the concentrations of these analytes in complex biological materials. The degree of accuracy and precision achieved by the chip-based CE is comparable to conventional immunoassays, the system being able to analyze between 10-12 samples per hour. With the ever-expanding array of antibodies that are commercially available, this chip-based system can be applied to a wide variety of different analyses.     

微流控芯片测定单细胞内化学组分的进展

细胞是生命的基本单元。由于细胞的个体差异,传统分析群体细胞的方法难以得到单细胞的重要信息。准确可靠地测定单细胞内化学组分的含量能大大提高从正常细胞中辨别不正常细胞的能力,为进一步研究和发展生物化学、医学和临床检验等领域奠定基础。近年来,用微流控芯片进行单细胞分析已引起广泛的兴趣。微流控芯片可以集成单细胞进样、溶膜、电泳分离胞内化学组分和高灵敏度测定等一系列操作步骤,为分析单细胞内的化学组分提供了新的技术平台。本文主要综述了近年来微流控芯片测定单细胞内化学组分的进展。重点在于利用电渗流、压力结合电渗流和激光镊子等技术操控单细胞在微流控芯片上完成单细胞进样、溶膜、细胞内化学组分的电泳分离和高灵敏度测定等一系列操作步骤。对在微流控芯片上的衍生技术也做了较为详细的阐述。     

In-column field-amplified sample stacking of biogenic amines on microfabricated electrophoresis devices

A novel method for performing in-column field-amplified sample stacking (FASS) in chip-based electrophoretic systems is presented. The methodology involves the use of a narrow sample channel (NSC) injector. NSC injectors allow sample plugs to be introduced directly into the separation channel, and subsequent stacking and separation can proceed without any need for leakage control. More importantly, stacking and separation occur in a single step negating the requirement for complex channel geometries and voltage switching to control sample plugs during the stacking procedure. The chip is composed of six paralleled systems. Using the NSC injector design, the number of reservoirs in the multiplexed chip is reduced to N + 2, where N is the number of paralleled systems. This design feature radically reduces the complexity in chip structures and associated chip operation. The approach is applied to the analysis of fluorescently labelled biogenic amines affording detection at concentrations down to 20 pM.     

Electrochromatographic separation on a poly(dimethylsiloxane)/glass chip by integration of a capillary containing an acrylate monolithic stationary phase

In this paper, we present an approach to perform electrochromatographic separations on poly(dimethylsiloxane) chips: a fused-silica capillary containing a stationary phase was introduced directly into the chip. This approach would offer great flexibility since capillary modification methods are well known, and thus, with this kind of chip, different microfluidic devices having various functions could be prepared. Electrophoretic separations were first achieved by integrating an empty capillary into the chip to evaluate the analytical performances of this system. They were compared to those obtained with a classical chip. Finally, an electrochromatographic separation involving a capillary containing a hexyl acrylate-based monolith was performed. These preliminary results show this approach to be promising.     

An automated electrokinetic continuous sample introduction system for microfluidic chip-based capillary electrophoresis

An automated and continuous sample introduction system for microfluidic chip-based capillary electrophoresis (CE) was developed in this work. An efficient world-to-chip interface for chip-based CE separation was produced by horizontally connecting a Z-shaped fused silica capillary sampling probe to the sample loading channel of a crossed-channel chip. The sample presentation system was composed of an array of bottom-slotted sample vials filled alternately with samples and working electrolyte, horizontally positioned on a programmable linearly moving platform. On moving the array from one vial to the next, and scanning the probe, which was fixed with a platinum electrode on its tip, through the slots of the vials, a series of samples, each followed by a flow of working electrolyte was continuously introduced electrokinetically from the off-chip vials into the sample loading channel of the chip. The performance of the system was demonstrated in the separation and determination of FITC-labeled arginine and phenylalanine with LIF detection, by continuously introducing a train of different samples. Employing 4.5 kV sampling voltage (1000 V cm(-1) field strength) for 30 s and 1.8 kV separation voltage (400 V cm(-1) field strength) for 70 s, throughputs of 36 h(-1) were achieved with <1.0% carryover and 4.6, 3.2 and 4.0% RSD for arginine, FITC and phenylalanine, respectively (n = 11). Net sample consumption was only 240 nL for each sample.