VPO催化剂上丙烷选择氧化反应机理的分子探针研究

ＶＰＯ催化剂上丙烷选择氧化反应机理的分子探针研究赵如松，徐铸德（浙江大学化学系，杭州３１００２７）关键词ＶＰＯ催化剂，丙烷，选择氧化，分子探针，反应机理最近研究［１－２］表明，Ｃ３０在ＶＰＯ催化剂上可直接选择氧化成丙烯酸和乙酸。这种工艺与现行烯烃为原...     

VPO催化剂的再生性质及其对晶格氧选择氧化丙烷的影响

采用脉冲反应器,研究了ＶＰＯ催化剂的再生性质及其对晶格氧选择氧化丙烷制丙烯酸和乙酸的影响,结果表明,ＶＰＯ催化剂与气相分子氧反应的速度要比丙烷与其 和氧反应的速度慢许多,因此以丙烷－Ｏ２共进料方式进行反应时,催化剂氧化再生是速度控制步骤,水是影响催化剂选择性的重要因素,但对活性影响不大,在反应温度下,水在ＶＰＯ催化剂 为可逆吸附,容易脱附流失,催化丙烷反应生成目的的产物的活性中心很稳定,主要是晶格     

VPO／SiO2催化剂的制备及性能研究

ＶＰＯ／ＳｉＯ２催化剂的制备及性能研究牛童王晓来１）索继栓（中国科学院兰州化学物理研究所羰基合成与选择氧化国家重点实验室兰州７３００００）关键词ＶＰＯ／ＳｉＯ２催化选择氧化正丁烷顺酐分类号Ｏ６４３．３２利用混浆钒磷混合氧化物催化剂催化正丁烷选择氧化制...     

负载型钒基催化剂上丙烷的氧化脱氢──酸碱性及氧化还原性质对催化性能的影响

用乙酰丙酮络钒法制备了两组不同氧化物和磷酸盐载体负载的钒载量为５％Ｖ２Ｏ５的催化剂．ＸＲＤ和Ｒａｍａｎ光谱表征结果表明，钒氧化物在载体ＭｇＯ，Ａｌ２Ｏ３，Ｍｇ３（ＰＯ４）２，ＡｌＰＯ４和Ｚｒ３（ＰＯ４）４上是高度分散的，没有生成明显的Ｖ２Ｏ５晶相；催化剂的可还原性与其氧化物或磷酸盐载体的金属还原电位序有较好的对应关系，与其丙烷氧化脱氢活性也存在较好的平行关系，表明钒氧化物与载体的阳离子形成了Ｖ—Ｏ—Ｍ桥键，该桥键氧较易移去，可能是丙烷氧化脱氢的活性氧物种；催化剂表面酸性位有利于丙烷Ｃ—Ｈ键的活化，但导致深度氧化产物增多．     

掺杂Pr对VPO催化剂性质的影响

在ＶＰＯ催化剂中添加Ｐｒ，用ＸＲＤ，ＬＲＳ，ＸＰＳ，ＥＳＲ和＾３１Ｐ固体核磁共振考察了催化剂的相组成和钒的氧化态，用ＮＨ３－ＴＰＤ和吡啶吸会原位红外光谱表征了催化剂表面的酸量。将催化剂应用于正丁烷选择氧化生成顺酐的反应中，实验结果表明，当Ｐｒ／Ｖ原子比＝０．０５时，活性相（ＶＯ）２Ｐ２Ｏ７的量增加，表面酸性增强，正丁烷转化率和生成顺酐的选择性都有所提高，而Ｐｒ／Ｖ≥０．１０时，（ＶＯ）２Ｐ２Ｏ７的     

负载型钒基催化剂上丙烷的氧化脱氢:酸碱性及氧化还原性质对催化性能的影响

用乙酰丙酮络钒法制备了两组不同氧经物和磷酸盐载体负载的钒载量为５％Ｖ２Ｏ５的催化剂，ＸＲＤ和Ｒａｍａｎ光谱表征结果表明，钒氧化物在载体ＭｇＯ，Ａｌ２Ｏ３，Ｍｇ３（ＰＯ４）２，ＡｌＰＯ４和Ｚｒ３（ＰＯ４）４上是高度分散的，没有生成明显的Ｖ２Ｏ５晶相；催化剂的可还性与其氧化物或磷酸盐载体的金属还原电位序有较好的对应关系，与其丙烷氧化脱氢活性也在较好的平行关系，表明钒氧化和与载体的阳离子形成了Ｖ－Ｏ－Ｍ     

As-V-O簇合物对乙苯选择氧化反应的催化活性

通过水热方法合成了簇合物［Ｎ（ＣＨ３）４］４［Ａｓ８Ｖ１４Ｏ４２（８Ｈ２Ｏ）］及其相近的同多及杂多钒氧簇Ｋ６Ｖ１０Ｏ２８·９Ｈ２Ｏ，ＮａＫＶ２Ｏ６，（Ｈ２Ｅｎ）０．５Ｖ２Ｏ５，（Ｈ２Ｅｎ）３（ＶＯ）９（ＰＯ４）８，Ｎａ３ＶＯ（ＨＰＯ４）（ＰＯ４）·Ｈ２Ｏ．运用ＸＲＤ和ＩＲ等手段表征了［Ｎ（ＣＨ３）４］４［Ａｓ８Ｖ１４Ｏ４２（８Ｈ２Ｏ）］的结构．该类化合物对于催化乙苯过氧化氢选择氧化制苯乙酮具有较高的催化活性．通过比较含钒与不含钒化合物的活性情况，讨论了催化氧化的活性中心．     

VPO,VPO／Al2O3催化剂前身物的热分解过程

本文应用差热、热重分析技术并结合Ｘ射线衍射和红外光谱法对水相，有机相制备的ＶＰＯ催化剂及水相制备的ＶＰＯ／Ａｌ_２Ｏ_３催化剂前身物在空气中的热分解过程进行了考察，由红外光谱证明，ＶＰＯ催化剂前身物的主要组成成分为ＶＯＨＰＯ４·０．５Ｈ２Ｏ．不同制备方法和制备条件对ＶＰＯ催化剂的热分解行为和最终产物有很大影响，随着Ｐ／Ｖ比的改变，ＶＰＯ催化剂前身物在焙烧过程中转变为不同的活性相，并且过量的磷酸抑制Ｖ（Ⅳ）的氧化过程。在ＶＰＯ／Ａｌ_２Ｏ_３催化剂上，ＶＰＯ前身物和载体发生了化学作用，这种作用促进了催化剂的热分解。     

致孔剂对HP（MA—VAc—MMA）载体孔结构的影响

以二乙烯苯和双丙烯酸多缩乙二醇酯为交联剂、聚醋酸乙烯酯（ＰＶＡｃ）或它与醋酸丁酯（ＢＡＣ）的混合物为致孔剂、ＢＰＯ为引发剂，用悬浮聚合随后水解的方法制得了部分水解聚（丙烯酸甲酯－醋酸乙烯酯－甲基丙烯酸甲酯）［ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）］多孔载体，研究了ＰＶＡｃ及（ＰＶＡｃ＋ＢＡＣ）用量、分子量及混合比对ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）孔结构的影响。结果表明，当ＰＶＡｃ的Ｍ＞２．５×１０５，ＰＶＡｃ／ＢＡＣ为２．３，用量为１０～２０％时，可制得孔隙率较高，孔径分布较窄，孔表面积较大的多孔载体。这种载体适用于微生物固定化。     

丙烷在负载型V2O5/Zr3(PO4)4催化剂上的氧化脱氢

制备了无定型的磷酸锆Ｚｒ３（ＰＯ４）４载体,采用浸渍法在载体上负载０６％～６０％的Ｖ２Ｏ５．所制备的催化剂在丙烷氧化脱氢反应中具有较好的催化性能,如３０％Ｖ２Ｏ５／Ｚｒ３（ＰＯ４）４催化剂在丙烷转化率为１７０％时,丙烯选择性可达５３８％,丙烯收率达９１％．考察了不同反应条件下催化剂的性能．ＸＲＤ、ＩＲ和Ｒａｍａｎ光谱表明,Ｖ２Ｏ５在Ｚｒ３（ＰＯ４）４载体上主要是以高度分散的钒氧物种存在;ＥＳＲ分析结果证明催化剂中存在Ｖ４＋物种,表明Ｖ５＋／Ｖ４＋参与了氧化还原反应．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.