A highly efficient organic sensitizer for dye-sensitized solar cells

We have synthesized a highly efficient organic dye for a dye-sensitized solar cell; the overall solar-to-energy conversion efficiency was 9.1% at AM 1.5 illumination (100 mW cm(-2)): short-circuit current density (J(sc)) = 18.1 mA cm(-2), open circuit photovoltage (V(oc)) = 743 mV and fill factor (ff) = 0.675.     

Panchromatic trichromophoric sensitizer for dye-sensitized solar cells using antenna effect

The first trichromophoric sensitizer, consisting of covalently linked boradiazaindacene (BODIPY), zinc porphyrin (ZnP), and squaraine (SQ) units, has been synthesized by Heck alkynylation to obtain a panchromatic dye, for dye sensitized solar cells (DSSCs). Efficient intramolecular energy transfers (ET) were observed between all chromophoric subunits and enhance the overall conversion efficiency by 25%. The antenna effect is demonstrated by the photoaction spectrum which features all of a chromophore's absorption bands.     

A high molar extinction coefficient sensitizer for stable dye-sensitized solar cells

An amphiphilic heteroleptic polypyridyl ruthenium complex with a high molar extinction coefficient was synthesized and demonstrated as an efficient, thermostable sensitizer in nanocrystalline dye-sensitized solar cells.     

A panchromatic boradiazaindacene (BODIPY) sensitizer for dye-sensitized solar cells

A novel distyryl-substituted boradiazaindacene (BODIPY) dye displays interesting properties as a sensitizer in DSSC systems, opening the way to further exploration of structure-efficiency correlation within this class of dyes.     

Electron-rich heteroaromatic conjugated bipyridine based ruthenium sensitizer for efficient dye-sensitized solar cells

A novel heteroleptic ruthenium complex carrying a heteroaromatic-4,4'-pi-conjugated 2,2'-bipyridine [Ru(II)LL'(NCS)(2)] (L = 4,4'-bis[(E)-2-(3,4-ethylenedioxythien-2-yl)vinyl]-2,2'-bipyridine, L' = 4,4'-(dicarboxylic acid)-2,2'-bipyridine) was synthesized and used in dye-sensitized solar cells, yielding photovoltaic efficiencies of 9.1% under standard global AM 1.5 sunlight.     

Organic dyes containing a coplanar indacenodithiophene bridge for high-performance dye-sensitized solar cells

A series of new organic dyes exploiting coplanar indacenodithiophene as the central π-spacer of the classical donor-(π-spacer)-acceptor configuration were synthesized and characterized for dye-sensitized solar cells. The coplanarity of the indacenodithiophene core facilitates efficient donor to acceptor charge transfer, imparting the new organic dyes significant bathochromic shifts and remarkable power conversion efficiencies of up to 6.7% (DTInDT) under AM 1.5G radiation.     

Cyclometalated ruthenium complex as a promising sensitizer in dye-sensitized solar cells

Ruthenocycle bis(4,4′-dicarboxy-2,2′-bipyridine)(2-phenylpyridine-²C,N)ruthenium(II) hexafluorophosphate was used as a sensitizer in a dye-sensitized solar cell (DSSC) based on nanocrystalline TiO₂, which was applied onto a conducting substrate. Its electrochemical and spectral characteristics were studied. It was found that, when the DSSC was illuminated with visible light of power 35 mW/cm², the short-circuit current density was 11.6 mA cm^?2 and the open-circuit voltage was 0.49 V. The efficiency (η) of DSSC at a fill factor of 45% was 7.1%. Using the method of modulation spectroscopy of photocurrents and photopotentials, the life time and transit time of electrons were found to be 7 and 5 ms, respectively, and the diffusion coefficient of electrons was found to be 10^?5 cm² s^?1. Comparing the life and transit times of electron, it was concluded that the photogenerated electrons had time to reach the conducting substrate during their life time.     

Effect of sensitizer adsorption temperature on the performance of dye-sensitized solar cells

Employing a mesoscopic titania photoanode whose bilayer structure was judiciously selected to fit the optoelectronic characteristics of the Ru-based heteroleptic complex Na-cis-Ru(4,4'-(5-hexyltiophen-2-yl)-2,2'-bipyridine)(4-carboxylic-acid-4'-carboxylate-2,2'-bipyridine)(thiocyanate)(2), coded as C101, we investigated the effect of temperature for dye adsorption on the photovoltaic performance of dye-sensitized solar cells (DSCs). We found a significant efficiency enhancement upon lowering the temperature applied during the sensitizer uptake from solution. When the dye adsorption was performed at 4 °C, the photovoltaic performance parameters measured under standard reporting conditions (AM1.5 G sunlight at 1000 W/m(2) intensity and 25 °C), i.e., the open circuit voltage (V(oc)), the short circuit photocurrent density (J(sc)), the fill factor (FF), and consequently the power conversion efficiency (PCE), improved in comparison to cells stained at 20 and 60 °C. Results from electrochemical impedance spectroscopy (EIS) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) show that the self-assembled layer of C101 formed at lower temperature impairs the back-electron transfer from the TiO(2) conduction band to the triiodide ions in the electrolyte more strongly than the film produced at 60 °C. Profiting from the favorable influence that the low-temperature dye uptake exerts on photovoltaic performance, we have realized DSCs showing a power conversion efficiency of 11.5%.     

Synthesis of new di-anchoring organic sensitizer based on quinoxaline acceptor for dye-sensitized solar cells

New quinoxaline-based organic sensitizer bearing di-anchoring group for dye-sensitized solar cells (DSSCs) was synthesized from diethyl 4,5-diaminophthaltate, in which was prepared under mild condition by using Takehito’s method. The synthesized sensitizer was compared with mono-anchoring sensitizer through absorption spectra, emission spectra, J-V curve, and IPCE spectra, indicating the di-anchoring group leads to a noticeable improvement of J_sc value owing to more efficient intramolecular charge transfer and channel number increment.     

Efficient thiocyanate-free sensitizer: a viable alternative to N719 dye for dye-sensitized solar cells

We have designed and synthesized a new thiocyanate-free sensitizer coded as SPS-01 and used it as the sensitizer in a TiO(2) based nanocrystalline dye-sensitized solar cell (DSSC). SPS-01 exhibits strong visible absorption properties with maximum peak around at 532 nm. The overall power conversion efficiency (PCE) of a DSSC sensitized with SPS-01 (7.96%) is higher than that of N719 (7.30%) under identical experimental conditions. This high PCE is attributed mainly due to the improvement in the short circuit current.     

An organic sensitizer with a fused dithienothiophene unit for efficient and stable dye-sensitized solar cells

We report a high molar extinction coefficient organic sensitizer for high efficiency dye-sensitized solar cells. In combination with a solvent-free ionic liquid electrolyte, we have demonstrated a approximately 7% cell showing an excellent stability measured under the thermal and light soaking dual stress. This is expected to have an important practical consequence on the production of flexible, low-cost, and lightweight DSC based on plastic matrix.     

N-methylferrocenyl-N-ethylhydroxy ammonium nitrate: synthesis,characterization, and sensitizer in dye-sensitized solar cells

Transition Metal Chemistry - A new ferrocene-containing hydronitrate salt with formula N-methylferrocenyl-N-ethylhydroxy ammonium nitrate has been synthesized and characterized using microanalyses,...     

Butyronitrile-based electrolyte for dye-sensitized solar cells

We elaborated a new electrolyte composition, based on butyronitrile solvent, that exhibits low volatility for use in dye-sensitized solar cells. The strong point of this new class of electrolyte is that it combines high efficiency and excellent stability properties, while having all the physical characteristics needed to pass the IEC 61646 stability test protocol. In this work, we also reveal a successful approach to control, in a sub-Nernstian way, the energetics of the distribution of the trap states without harming cell stability by means of incorporating NaI in the electrolyte, which shows good compatibility with butyronitrile. These excellent features, in conjunction with the recently developed thiophene-based C106 sensitizer, have enabled us to achieve a champion cell exhibiting 10.0% and even 10.2% power conversion efficiency (PCE) under 100 and 51.2 mW·cm(-2) incident solar radiation intensity, respectively. We reached >95% retention of PCE while displaying as high as 9.1% PCE after 1000 h of 100 mW·cm(-2) light-soaking exposure at 60 °C.     

New architectures for dye-sensitized solar cells

Modern dye-sensitized solar cell (DSSC) technology was built upon nanoparticle wide bandgap semiconductor photoanodes. While versatile and robust, the sintered nanoparticle architecture exhibits exceedingly slow electron transport that ultimately restricts the diversity of feasible redox mediators. The small collection of suitable mediators limits both our understanding of an intriguing heterogeneous system and the performance of these promising devices. Recently, a number of pseudo-1D photoanodes that exhibit accelerated charge transport and greater materials flexibility were fabricated. The potential of these alternative photoanode architectures for advancing, both directly and indirectly, the performance of DSSCs is explored.     

Liquid electrolytes for dye-sensitized solar cells

The present review offers a survey of liquid electrolytes used in dye-sensitized solar cells from the beginning of photoelectrochemical cell research. It handles both the solvents employed, and the prerequisites identified for an ideal liquid solvent, as well as the various effects of electrolyte solutes in terms of redox systems and additives. The conclusions of the present review call for more detailed molecular insight into the electrolyte-electrode interface reactions and structures.     

Optimizing dyes for dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) have emerged as an important cheap photovoltaic technology. Charge separation is initiated at the dye, bound at the interface of an inorganic semiconductor and a hole-transport material. Careful design of the dye can minimize loss mechanisms and improve light harvesting. Mass application of DSSCs is currently limited by manufacturing complexity and long-term stability associated with the liquid redox electrolyte used in the most-efficient cells. In this Minireview, dye design is discussed in the context of novel alternatives to the standard liquid electrolyte. Rapid progress is being made in improving the efficiencies of such solid and quasi-solid DSSCs which promises cheap, efficient, and robust photovoltaic systems.     

Phenothiazinyl rhodanylidene merocyanines for dye-sensitized solar cells

Phenothiazinyl rhodanylidene acetic acid merocyanine dyes with variable substitution pattern on the peripheral benzene ring were synthesized in good to excellent yields by Knoevenagel condensation of the corresponding phenothiazinyl aldehydes and rhodanine-N-acetic acid. The electronic properties were investigated by cyclic voltammetry, absorption, and fluorescence spectroscopy. Electron releasing substitution leads to an appreciable lowering of the oxidation potential, bathochromic shift of the absorption band, and minimization of the emission quantum yield. Not least as a consequence of these properties, the compounds are interesting for use as chromophores in dye-sensitized solar cells (DSSC). DSSCs were constructed and successfully tested by determining the characteristic parameters such as incident-photon-to-electron conversion efficiency (IPCE), fill factor (FF), and overall efficiency.     

Ionic liquid electrolytes for dye-sensitized solar cells

The potential of room-temperature molten salts (ionic liquids) as solvents for electrolytes for dye-sensitized solar cells has been investigated during the last decade. The non-volatility, good solvent properties and high electrochemical stability of ionic liquids make them attractive solvents in contrast to volatile organic solvents. Despite this, the relatively high viscosity of ionic liquids leads to mass-transport limitations. Here we review recent developments in the application of different ionic liquids as solvents or components of liquid and quasi-solid electrolytes for dye-sensitized solar cells.     

New difluorenylaminocoumarin photosensitizers for dye-sensitized solar cells

Research on Chemical Intermediates - Three difluorenylaminocoumarin sensitizers with different π-bridges bearing thiophene ring and cyanoacrylic acid acceptor were synthesized and their...