Preparation and study of 1,8-di(pyrid-2'-yl)carbazoles

A series of three derivatives of 1,8-di(pyrid-2'-yl)carbazole were prepared by Stille-type coupling of 2-(tri-n-butylstannyl)pyridine with the appropriate 1,8-dibromocarbazole. The carbazoles were prepared by appropriate substitution methodologies on the parent carbazole or by palladium-catalyzed cyclization of di-(p-tolyl)amine to provide the carbazole ring system. An X-ray structure of the di-tert-butyl derivative confirmed that both pyridyl groups were oriented for favorable intramolecular H-bonding to the central N-H. Two orientations of the molecule were found in the unit cell and this observation was corroborated by two N-H stretching bands in the solid state IR. Substitution of N-H by N-D led to increased emission intensity through diminished intramolecular deactivation of the excited state. The di-tert-butyl derivative formed a tridentate complex with Pd(II), which showed a red-shifted band attributed to an intraligand charge transfer state.     

Tetradentate bis(o-iminobenzosemiquinonate(1-)) pi radical ligands and their o-aminophenolate(1-) derivatives in complexes of nickel(II), palladium(II), and copper(II)

The coordination chemistries of the potential tetradentate ligands N,N'-bis(3,5-di-tert-butyl-2-hydroxyphenyl)ethylenediamine, H4[L1], the unsaturated analogue glyoxal-bis(2-hydroxy-3,5-di-tert-butylanil), H2[L2], and N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)-2,2-dimethylpropylenediamine, H4[L3], have been investigated with nickel(II), palladium(II), and copper(II). The complexes prepared and characterized are [Ni(II)(H3L1)2] (1), [Ni(II)(HL2)2].5/8CH2Cl2 (2), [Ni(II)(L3**)] (3), [Pd(II)(L3**)][Pd(II)(H2L3) (4), and [Cu(II)(H2O)(L4)] (5), where (L4)2- is the oxidized diimine form of (L3)4- and (L3**)2- is the bis(o-iminosemiquinonate) diradical form of (L3)4-. The structures of compounds 1-5 have been determined by single crystal X-ray crystallography. In complexes 1 and 2, the ligands (H3L1)- and (HL2)- are tridentate and the nickel ions are in an octahedral ligand environment. The oxidation level of the ligands is that of an aromatic o-aminophenol. 1 and 2 are paramagnetic (mu(eff) approximately 3.2 mu(B) at 300 K), indicating an S = 1 ground state. The diamagnetic, square planar, four-coordinate complexes 3 and [Pd(II)(L3**)] in 4 each contain two antiferromagnetically coupled o-iminobenzosemiquinonate(1-) pi radicals. Diamagnetic [Pd(II)(H2L3)] in 4 forms an eclipsed dimer via four N-H.O hydrogen bonding contacts which yields a nonbonding Pd.Pd contact of 3.0846(4) A. Complex 5 contains a five-coordinate Cu(II) ion and two o-aminophenolate(1-) halves in (L4)2-. The electrochemistries of complexes 3 and 4a ([Pd(II)(L3**)] of 4) have been investigated, and the EPR spectra of the monocations and -anions are reported.     

一种结合均相和非均相催化剂优势的聚乙炔纳米颗粒负载的钯（II）催化剂

负载型的金属催化剂虽然分离方便,但在反应活性、选择性以及催化剂的结构表征方面均明显不如相应的均相催化剂。将均相催化剂通过不同的化学键固载于高比表面积载体是实现均相催化剂多相化的重要途径,这样可使催化剂兼具均相和多相催化剂的优势。然而要将均相催化剂锚定于特定载体上,通常涉及较为复杂的合成反应,对载体也有严格的要求。因而该法仅仅适用于实验室研究,难以实现规模生产。因此,提供一种简便有效地制备兼具均相和多相催化剂优势的催化剂合成方法非常必要。本文报道一种简便的制备聚乙炔纳米颗粒负载Pd(II)催化剂(NP-Pd(II))的方法,所制催化剂在水相中的Suzuki-Miyaura偶联反应中表现出极高的活性,同时具有便于分离、容易放大制备的特点。在室温下,将乙炔气通入PdCl42-的水溶液中迅速变得浑浊,静置后容器底部有棕色沉淀,同时溶液变为无色透明。固体产物使用水、乙醇等溶剂进行洗涤;干燥之后收集既得聚乙炔纳米颗粒负载的Pd(II)催化剂NP-Pd(II)。使用透射电子显微镜、红外(IR)及拉曼吸收光谱、X射线衍射(XRD)、X射线光电子能谱(XPS)以及X射线吸收光谱(EXAFS)等手段对NP-Pd(II)进行了详细表征。结果显示,在NP-Pd(II)中Pd并非以Pd纳米颗粒形式存在; XRD中没有未Pd纳米晶的特征衍射峰。 IR等表征证明乙炔在Pd的催化作用下发生聚合作用,生成了聚乙炔。 EXAFS结果表明, Pd分别和氯原子以及C=C双键进行配位;同时,没有观察到Pd–Pd键的生成,进一步证明了Pd未被还原为Pd纳米颗粒。 XPS也印证了Pd(II)的价态。形貌上, NP-Pd(II)为直径2–3nm的颗粒,其中的Pd原子均匀分散于聚乙炔纳米颗粒上,使其在反应过程中能够充分地与底物接触,从而在Suzuki-Miyaura偶联反应中表现出极高的活性。更重要的是,由于“憎水效应”, NP-Pd(II)在溶液中以微米级的聚集体形式存在,因而反应后通过离心或者静置从反应体系中分离出来。因此,在NP-Pd(II)催化剂中,每个Pd原子都是潜在的活性中心,这与典型的均相催化剂相似;同时,其独特的形貌使其具备了多相催化剂便于分离的特点。因此, NP-Pd(II)是一种兼具均相和多相催化剂优点的催化剂且其催化剂的制备方法极为简便。乙炔是常用的工业气体,溶剂采用水,制备在室温下即可完成,我们也成功地制备出克级规模的高活性、稳定性的NP-Pd(II)催化剂。     

Pd(II) Binding Strength of a Novel Ambidentate Dipeptide-Hydroxypyridinonate Ligand: A Solution Equilibrium Study

A novel ambidentate dipeptide conjugate (H(L1)) containing N-donor atoms of the peptide part and an (O,O) chelate at the hydroxypyridinone (HP) ring is synthesized and characterized. It is hoped that this chelating ligand can be useful to obtain multitargeted Co(III)/Pt(II) dinuclear complexes with anticancer potential. The Pd(II) (as a Pt(II) model but with faster ligand exchange reactions) binding strength of the ligand was studied in an aqueous solution with the combined use of pH-potentiometry and NMR. In an equimolar solution, (L1)⁻ was found to bind Pd(II) via the terminal amino and increasing number of peptide nitrogens of the peptide backbone over a wide pH range. At a 2:1 Pd(II) to ligand ratio, the presence of [Pd₂H_–x(L1)] (x = 1–4) species, with high stability and with the coordination of the (O,O) chelating set of the ligand, was detected. The reaction of H(L1) with [Co(tren)]³⁺ (tren = tris(2-aminoethyl)amine) indicated the exclusive binding of (L1)⁻ via its (O,O) donor atoms to the metal unit, while treatment of the resulting Co-complex with Pd(II) afforded the formation of a Co/Pd heterobimetallic complex in solution with an (NH₂, N_amide) coordination of Pd(II). Shortening the peptide backbone in H(L1) by one peptide unit compared to the structurally similar ambidentate chelator consisting of three peptide bonds resulted in the slightly more favorable formation of the N-coordinated Pd(II) species, allowing the tailoring of the coordination properties.     

(4-Vinylpyridine-Styrene) Copolymer as Host Polymer for Chromophoric Complexes with Potential Second Order Nonlinear Optical Properties

A series of new metal containing polymers for second order nonlinear optics have been prepared by grafting Cu (II) and Pd (II) chromophoric complexes on a preformed (4-vinylpyridine-styrene) copolymeric backbone. The metallated polymers have been chemically and physically characterized. They show high glass transition temperatures, high thermal stability and good solubility. Their properties have been compared with analogous metallated poly(4-vinylpyridine) samples: variations in the polymeric backbone, as well as in ligands, metal, and metallation ratio, allow to tune their properties.     

Interplay of terminal amino group and coordinating side chains in directing regioselective cleavage of natural peptides and proteins with palladium(II) complexes

Palladium(II) ions anchored to side chains of histidine and methionine residues in peptides and proteins in weakly acidic aqueous solutions promote hydrolytic cleavage of proximate amide bonds in the backbone. In this study, we determine how attachment of Pd(II) ions to histidine and methionine anchors and also to the terminal amino group in six natural peptides (chains A and B of insulin, segment 11-14 of angiotensinogen, pentagastrin, angiotensin II, and segment 3-8 of angiotensin II) and two proteins (ubiquitin and cytochrome c) affects regioselectivity and rate of backbone cleavage. These Pd(II)-promoted reactions follow a clear pattern of regioselectivity, directed by the anchoring side chains. When the Pd(II) reagent is nonspecifically anchored to the terminal amino group, the ligating site that is present in almost all proteins, the cleavage is fortunately absent. When the reagent is anchored to a residue in positions 1, 2, or 3, cleavage is absent, because the terminal amino group and deprotonated amide nitrogen atom(s) interposed between it and the anchor "lock" the Pd(II) ion in hydrolytically inactive chelate complexes. When the reagent is anchored to residues in positions beyond 3, the second amide bond upstream from the anchor is regioselectively cleaved in all cases when the anchor was "isolated," that is, flanked by noncoordinating side chains. Segment 3-8 of angiotensin II undergoes additional cleavage, which we explain by determining the rate constants for the cleavage, identifying the rate-limiting displacement of ethylenediamine ligand from the Pd(II) ion, and detecting several intermediates. Experiments with cytochrome c demonstrate that the number of cleavage sites can be controlled by adjusting the mole ratio of the Pd(II) reagent to the substrate. Our inorganic peptidases are useful for biochemical applications because their regioselectivity and reactivity set them apart from proteolytic enzymes and organic chemical reagents.     

Copolymerization of ethylene with polar monomers: chain propagation and side reactions. A DFT theoretical study using zwitterionic Ni(II) and Pd(II) catalysts

Calculations utilizing anionic substituted derivates of the cationic N(wedge)N--Ni(II) and Pd(II) diimine Brookhart complex have been carried out on the barriers of ethylene and acrylonitrile insertion into a M- methyl, propyl and CH(CN)Et bond for M = Ni, Pd. The possibility of side reactions such as chelate formation with the polar functionality and oligomerization of the active species after acrylonitrile insertion are explored. The diimine ring system N--N = -NR' 'CR(1)CR(2)NR' ' with R' ' = 2,6-C(6)H(3)(i-Pr)(2) and R(1),R(2) = Me was functionalized by adding one or two anionic groups (BF(3)(-), etc.) in place of i-Pr on the aryl rings or by replacing one Me diimine backbone group (R(1)) with BH(3)(-). The objective of this investigation is computationally to design catalysts for ethylene/acrylonitrile copolymerization that have activities that are comparable to that of the cationic Ni(II) diimine or at least the Pd(II) diimine Brookhart system for ethylene homopolymerization. Complexes that might meet this objective are discussed.     

Synthesis, characterization, structures and cytotoxic activity of palladium(II) and platinum(II) complexes containing bis(2-pyridylmethyl)amine and saccharinate

New palladium(II) and platinum(II) complexes containing bis(2-pyridylmethyl)amine (bpma) and saccharinate (sac), [Pd(bpma)(sac)](sac)·2H₂O (1), [Pt(bpma)(sac)](sac)·2H₂O (2), [Pd(bpma)Cl](sac)·2H₂O (3) and [Pt(bpma)(sac)]Cl·1.5H₂O (4), were synthesized and characterized by elemental analysis, IR, NMR and TG-DTA. A single-crystal X-ray analysis of 3 and 4 proved a distorted square-planar geometry around the metal ions with one tridentate bpma ligand and one Cl or sac monoanion. The [Pd(bpma)Cl]⁺ ions in 3 form dimers by intermolecular N-H?Cl and Pd?Pd interactions. The cations reside in the centers of a hydrogen-bonded honeycomb network formed by the uncoordinated sac ions and the lattice water molecules, while the cations of 4 are connected by N-H?Cl and OW-H?O hydrogen bonds into one-dimensional chains. Cyclic planar tetrameric and trimeric water clusters were observed in 3 and 4, respectively. Cytotoxicity of 1-4 was tested against A549, C6 and CHO cells. Although 2 and 4 have no cytotoxicity, the best results were achieved for 1 and 3. In particular, the cyctotoxic activity of 3 is comparable to cisplatin.     

<Emphasis Type="Italic">N</Emphasis>-(2-(2-Pyridyl)ethyl)chitosan (PEC) for Pd(II) and Pt(IV) sorption from HCl solutions

Chitosan was modified by grafting 2-pyridyl-ethyl moieties on the biopolymer backbone for the synthesis of a Platinum Group Metal (PGM) sorbent. The sorbent was tested for Pd(II) and Pt(IV) sorption from HCl solutions. Stable for HCl concentrations below 0.5 M, the sorbent reached sorption capacities as high as 3.2 and 2.6 mmol metal g⁻¹ for Pd(II) and Pt(IV), respectively. Metal sorption mainly proceeds by electrostatic attraction in acidic solutions, though a contribution of complexation mechanism cannot be totally rejected. The resistance to intraparticle diffusion is the main controlling mechanism for uptake kinetics. While agitation speed has a limited effect on kinetics, metal concentration and sorbent dosage have a greater effect on the kinetic profiles. The intraparticle diffusivity varies between 3 × 10⁻¹¹ and 4.5 × 10⁻¹⁰ m² min⁻¹. Thiourea (combined with HCl solution) is used for Pd(II) and Pt(IV) desorption. The resin could be desorbed and recycled for a minimum of five cycles maintaining high efficiencies of sorption and desorption.     

Aryl transfer between Pd(II) centers or Pd(IV) intermediates in Pd-catalyzed domino reactions

A computational study has been performed to determine the mechanism of the key steps of Pd-catalyzed domino reactions in which C(sp2)-C(sp2) are formed from aryl and alkenyl halides. DFT calculations were done on model complexes of the proposed intermediates, with PH3 and H2O as ancillary ligands, to explore two possible mechanisms: the oxidative addition of aryl or alkenyl halides to palladacycles to give Pd(IV) intermediates, and the transmetalation-type reaction of aryl or alkenyl ligands between two Pd(II) centers, a palladacycle, and a Pd(II) complex formed by oxidative addition of aryl or alkenyl halides to Pd0. We have shown that oxidative addition of iodoethylene to Pd0 precursors is more favorable than oxidative addition to Pd(II) palladacycles, whereas transmetalation-type reactions between Pd(II) complexes are facile. Similar results were obtained with iodobenzene instead of iodoethylene and formamide as the ancillary ligand. These results suggest that Pd(IV) intermediates are not involved in these reactions.     

Palladium(II) 3-iminophosphine (3IP) complexes: Active precatalysts for the intermolecular hydroamination of 1,2-dienes (allenes) and 1,3-dienes with aliphatic amines under mild conditions

The synthesis of alicyclic 3-iminophosphine ligands is extended to include a new framework incorporating a cyclohexenyl backbone with an N-aryl imino functionality (3IP^Ar). Accordingly, a series of palladium(II) complexes employing this new ligand have been synthesized and utilized in the intermolecular hydroamination of 3-methyl-1,2-butadiene (1,1-dimethylallene) and 2,3-dimethyl-1,3-butadiene with secondary amines. The complex [(3IP^Ar)Pd(allyl)]OTf displays excellent catalytic activity in these reactions, selectively producing allylic amine products in high conversion under mild conditions, with an improved rate relative to that observed for our previously reported catalysts. Further, the reactivity trends for the (3IP)Pd triflate systems prove to be complimentary to other known late transition metal based catalytic systems.     

Influence of the chelate effect on the electronic structure of one-electron oxidized group 10 metal(II)-(disalicylidene)diamine complexes

The neutral and one-electron oxidized group 10 metal, Ni(II), Pd(II) and Pt(II), six-membered chelate Salpn (Salpn = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,3-propanediamine) complexes have been investigated and compared to the five-membered chelate Salen (N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-ethanediamine) and Salcn (N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane-(1R,2R)-diamine) complexes. Reaction of the Salpn complexes with 1 equivalent of AgSbF(6) affords the oxidized complexes which exist as ligand radical species in solution and in the solid state. The solid state structures of the oxidized complexes have been determined by X-ray crystal structure analysis. While the Ni and Pt analogues exhibit an essentially symmetric coordination sphere contraction upon oxidation, the oxidized Pd derivative exhibits an asymmetric metal binding environment demonstrating at least partial ligand radical localization. In comparison to the oxidized Salen and Salcn complexes, the propyl backbone of the Salpn complexes leads to a larger deviation from a planar geometry in the solid state. The electronic structure of the oxidized Salpn complexes was further probed by UV-vis-NIR measurements, electrochemistry, EPR spectroscopy, and theoretical calculations. The intense NIR band for the one-electron oxidized Salpn complexes shifts to lower energy in comparison to the 5-membered chelate analogues, which is attributed to lower metal d(xz) character in the β-LUMO for the Salpn series. The reactivity of the one-electron oxidized Salpn complexes with exogenous ligands was also studied. In the presence of pyridine, the oxidized Ni analogue exhibits a shift in the locus of oxidation to a Ni(III) species. The oxidized PtSalpn complex rapidly decomposes in the presence of pyridine, even at low temperature. Interestingly, electronic and EPR spectroscopy suggests that the addition of pyridine to the oxidized Pd analogue results in initial dissociation of the phenoxyl radical ligand, likely due to the increased flexibility of the propyl backbone.     

Furoin thiosemicarbazone as an analytical reagent for nickel(II), palladium(II) and copper(II)

Furoin thiosemicarbazone (FTS) reacts with Ni(II), Pd(II) and Cu(II) in aqueous medium, giving yellow solutions at pH 9, 6 and 3 respectively. The complexes have absorption maxima at 360 nm for Ni(II) and Pd(II) and 355 nm for Cu(II). At these wavelengths the reagent absorbance is negligible. The molar absorptivities are 1.54 x 10(4) [Ni(FTS)(2)], 1.98 x 10(4) [Pd(FTS)(2)] and 1.45 x 10(4) 1.mole(-1).cm(-1) (CuFTS). Beer's law is valid up to 4, 5 and 3 ppm for Ni, Pd and Cu respectively. The apparent instability constant of the Ni-FTS system is found to be 6.5 x 10(-11), of the Cu-FTS system 7.1 x 10(-7) and of the Pd-FTS system 3 x 10(-12) at the recommended pH values. The effect of various ions is reported.     

Control of competing N-H insertion and Wolff rearrangement in dirhodium(II)-catalyzed reactions of 3-indolyl diazoketoesters. synthesis of a potential precursor to the marine 5-(3-indolyl)oxazole martefragin A

Dirhodium(II)-catalyzed reaction of 3-indolyl alpha-diazo-beta-ketoester 25 in the presence of hexanamide results in competing metal carbene N-H insertion and Wolff rearrangement. The corresponding phenyl diazoketoester 32, on the other hand, gives only the product of N-H insertion, suggesting that the indole moiety is more prone to 1,2-rearrangement. The competing processes were investigated in a range of 3-indolyl alpha-diazo-beta-ketoesters (36, 38, 40, 44); these studies established that the Wolff rearrangement could be effectively suppressed by the presence of a strong electron-withdrawing group on the indole nitrogen. Dirhodium(II) catalysts were also more effective than copper or Lewis acid catalysts in favoring the insertion process. The products of N-H insertion, the ketoamides (26, 47, 49, 51, 53), were readily cyclodehydrated to the corresponding 5-(3-indolyl)oxazoles. The N-H insertion/cyclodehydration methodology was used in a formal synthesis of the marine natural product martefragin A. Thus the N-Boc homoisoleucine amide 23, prepared by asymmetric hydrogenation of a dehydro amino acid, underwent N-H insertion with the rhodium carbene derived from the N-nosyl indolyl diazoester 40, followed by cyclodehydration and deprotection to give the 5-(3-indolyl)oxazole martefragin A precursor 75.     

Palladium(II) complexes, as synthetic peptidases, regioselectively cleave the second peptide bond "upstream" from methionine and histidine side chains

Palladium(II) complexes promote hydrolysis of natural and synthetic oligopeptides with unprecedented regioselectivity; the only cleavage site is the second peptide bond upstream from a methionine or a histidine side chain, that is, the bond involving the amino group of the residue that precedes this side chain. We investigate this regioselectivity with four N-acetylated peptides as substrates: neurotransmitter methionine enkephalin (Ac-Tyr-Gly-Gly-Phe-Met) and synthetic peptides termed Met-peptide (Ac-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala), His-peptide (Ac-Val-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met(OX)-Ala-Ala-Arg-Ala), in which a Met is oxidized to sulfone, and HisMet-peptide (Ac-Val-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala). While maintaining protein-like properties, these substrates are suitable for quantitative study since their coordination to Pd(II) ion can be determined (by NMR spectroscopy), and the cleavage fragments can be separated (by HPLC methods) and identified (by MALDI mass spectrometry). The only peptide bonds cleaved were the Gly3-Phe4 bond in methionine enkephalin, Gly4-Gly5 bond in Met-peptide, Gly3-Gly4 in His-peptide, and Gly3-Gly4 and Gly9-Gly10 bonds in HisMet-peptide. We explain this consistent regioselectivity of cleavage by studying the modes of Met-peptide coordination to the Pd(II) ion in [Pd(H(2)O)(4)](2+) complex. In acidic solution, the rapid attachment of the Pd(II) complex to the methionine side chain is followed by the interaction of the Pd(II) ion with the peptide backbone upstream from the anchor. In the hydrolytically active complex, Met-peptide is coordinated to Pd(II) ion as a bidentate ligand - via sulfur atom in the methionine side chain and the first peptide nitrogen upstream from this anchor - so that the Pd(II) complex approaches the scissile peptide bond. Because the increased acidity favors this hydrolytically active complex, the rate of cleavage guided by either histidine or methionine anchor increased as pH was lowered from 4.5 to 0.5. The unwanted additional cleavage of the first peptide bond upstream from the anchor is suppressed if pH is kept above 1.2. Four Pd(II) complexes cleave Met-peptide with the same regioselectivity but at somewhat different rates. Complexes in which Pd(II) ion carries labile ligands, such as [Pd(H(2)O)(4)](2+) and [Pd(NH(3))(4)](2+), are more reactive than those containing anionic ligands, such as [PdCl(4)](2)(-), or a bidentate ligand, such as cis-[Pd(en)(H(2)O)(2)](2+). When both methionine and histidine residues are present in the same substrate, as in HisMet-peptide, 1 molar equivalent of the Pd(II) complex distributes itself evenly at both anchors and provides partial cleavage, whereas 2 molar equivalents of the promoter completely cleave the second peptide bond upstream from each of the anchors. The results of this study bode well for growing use of palladium(II) reagents in biochemical and bioanalytical practice.     

'Double redox-activity' in azobenzene-quinonoid palladium(II) complexes: a combined structural, electrochemical and spectroscopic study

Reactions of [(az(-H))Pd(μ-Cl)(2)Pd(az(-H))] (az = azobenzene) with the zwitterionic, p-benzoquinonemonoimine-type ligands 4-(n-butylamino)-6(n-butylimino)-3-oxocyclohexa-1,4-dien-1-olate (Q(1)) or 4-(isopropylamino)-6(isopropylimino)-3-oxocyclohexa-1,4-dien-1-olate) (Q(2)) in the presence of a base leads to the formation of the mononuclear complexes [(az(-H))Pd(Q(1)(-H))] (1) and [(az(-H))Pd(Q(2)(-H))] (2) respectively. Structural characterization of 2 shows an almost square planar coordination geometry around the Pd(II) centre, a short Pd-C bond, a slight elongation of the N=N double bond of the az(-H) ligand and localization of the double bonds within the Q(2)(-H) ligand. Additionally, intermolecular N-H-O interactions exist between the uncoordinated N-H and O groups of two different molecules. Cyclic voltammetry of the complexes reveals an irreversible oxidation and two reversible reduction processes. A combination of electrochemical and UV-vis-NIR and EPR spectroelectrochemical studies are used to show that both coordinated ligands participate successively in the redox processes, thus revealing their non-innocent character.     

Organosilicon backbone containing pyridyl/quinolyl ligands: Synthesis, complexation reactions and single crystal structures of metallamacrocyclic Pd(II) and Cu(II) complexes

Organosilicon backbone containing ligands 1,2-bis(dimethyl(2-pyridyl)silyl)ethane (L¹) and 1,2-bis(dimethyl(3-quinolyl)silyl) ethane (L²) have been synthesized by treating 2-bromopyridine and 3-bromoquinoline with n-butyllithium and reacting the resulting lithiated products with 1,2-bis(chlorodimethylsilyl)ethane. The ligation of L¹ and L² with Pd(II), Ag(I) and Cu(II) has been investigated. The single crystal structures of L², [Pd(L¹)Cl₂] (1), [Cu(L¹)Br₂] (3) and [PdCl₂(L²)]₂ (4) have been solved. All the three complexes are metallamacrocyclic in nature. The last one is 22-membered and the first example which has ligands containing organosilicon backbone. The geometry of Pd as well as Cu is very close to square planar. The Pd–N, Pd–Cl, Cu–N and Cu–Br bond distances (2.010(1)–2.027(3), 2.3063(10)–2.3114(4), 2.004(4)–2.018(5) and 2.4137(10)–2.4172(10) Å) are very close to sum of covalent radii, indicating strong ligation of L¹ and L² with the metal ions.     

Polarographic study of the dipropyldithiophosphinate complexes of Pd(II), Pb(II), Cd(II), and Zn(II) ions

The complexes of the dithiophosphinic acids with Pd(II), Pb(II), Cd(II), and ZN(II) in a toluene-ethanol medium produce single polarographic waves. The half-wave potential is a linear function of the ligand concentration. The stabilities of these chelates, which are characterized by a sulphur-metal bond, are in the order: Pd(II) > Pb(II) > Cd(II) > Zn(II).     

Polymer-supported pd(II) wacker-type catalysts

Seven polymer-supported Pd(II) catalysts have been prepared employing polymers carrying nitrile (cyanomethyl) ligands. Five of these involve polybenzimidazole backbones, one a polystyrene skeleton and the last a polyacrylonitrile backbone. The supported complexes have been used with CuCl₂ co-catalyst to oxidise dec-1-ene primarily to the methylketone under normal Wacker oxidation conditions. In some instances the supported complexes are more active than the (CH₃CN)₂PdCl₂ model. The most active species is a highly rigid - cyanomethylated polybenzimidazole and at least some of these metal centres may be coordinatively unsaturated. This catalyst also displays remarkable thermo-oxidative stability up to ∼400°C. The effect of solvent, temperature and co-catalyst ratio have been examined. The polymer-supported species remain very active at high temperature (∼120°C) and require addition of no hydrochloric acid to avoid irreversible precipitation of Pd(O) species. This is a complete contrast to homogeneous PdCl₂ which is rapidly deactivated under similar conditions with copious Pd black formation. Pd(O) complexes immobilised on the polymer seem to be “site isolated” and unable to aggregate. Re-oxidation therefore remains facile. The polymer-supported species have been recycled seven times. An initial fall in activity levels after 3 cycles and thereafter remains essentially constant. Appreciable Pd leaching also occurs in the first reaction but is rapidly arrested. After ∼6 cycles Pd loss is only ∼1 ppm per cycle. Following use of CuCl₂ co-catalyst in the first cycle, no additional Cu(II) needs to be added, and sufficient co-catalyst appears to be carried through with the isolated polymer-supported Pd(II) species. Starting with alk-1-enes isomerisation to the more thermodynamically stable internal alkenes is very much faster than oxidation. Indeed after only a short time no alk-1-ene is detectable e.g. by nuclear magnetic resonance analysis. Almost certainly, however, traces of the alk-1-ene do exist in equilibrium. Irrespective of whether the starting alkene is oct-1-ene, t-oct-2-ene or t-oct-4-ene the same three products are obtained: octan-2-one, -3-one and -4-one. In the case of oct-1-ene and t-oct-2-ene the composition of the ketone product mixture is very similar, although with t-oct-4-ene a significant increase in the proportion of the 4-one is observed. The major product in all cases however in the 2-one. The latter almost certainly arises from rapid oxidation of a small stationary concentration of alk-1-ene, with shift of the alkene equilibria maintaining the latter. Direct oxidation of the higher alkenes to the higher ketones occurs more slowly, but contrary to other reports in the literature this is significant.     

Evidence of enhanced conjugation in ortho-arylene ethynylenes with transition metal coordination

The effective conjugation of ortho and ortho-alt-para-arylene ethynylenes, with appropriately positioned pyridine and pyrazine heterocycles, increases upon binding to Ag(I) and Pd(II) cations. Significant bathochromic shifts in the electronic spectra, witnessed upon introduction of these metal bridges, are consistent with enhanced electron delocalization in the unsaturated backbone. Control studies suggest that this electronic behavior is attributable exclusively (in the case of Ag(I)) or partially (in the case of Pd(II)) to conformational restrictions of the conjugated backbones.