In-fiber modal interferometer based on dual-concentric-core photonic crystal fiber and its strain, temperature and refractive index characteristics

An in-fiber modal interferometer is demonstrated by splicing a section of homemade dual-concentric-core photonic crystal fiber (DCCPCF) and two segments of single-mode fibers (SMFs) with collapsing the air holes in the splice regions. By analyzing the transmission spectra and the spatial frequency spectra of the interferometers, it's observed that the main interfering modes are the high-order ring modes, which are different from the previously reported interferometers using the single-, few- or multi-mode fibers. The influences of the lengths of DCCPCF and the first collapsed region on the interferometers were investigated experimentally. The strain, temperature and refractive index characteristics of the interferometer were analyzed.     

Ultra-long-period fiber grating cascaded to a knob-taper for simultaneous measurement of strain and temperature

This study presents a simple Mach–Zehnder interferometer (MZI) to obtain the bimodal characteristics that realize simultaneous measurement of strain and temperature through cascading an ultra-long-period fiber grating and a knob-shaped taper. We obtain the multi-dip feature from the MZI, and the Dips 2 and 5 are selected from 11 interference dips. Experimental results indicated that the wavelength sensitivities of Dips 2 and 5 are ??0.54 nm mε^?1 and 0.058 nm °C^?1, and ??0.53 nm mε^?1 and 0.055 nm °C^?1 to strain and temperature, respectively. The depth sensitivities are ??3.3 dB mε^??1, ? 0.015 dB °C^?1 and ?5.8 dB mε^?1, and 0.06 dB °C^?1 for Dips 2 and 5, respectively. It is concluded that the proposed structure is suitable for simultaneous strain and temperature measurements.     

Novel modal interferometer based on ring-core photonic crystal fiber

An original design of ring-core photonic crystal fiber （RPCF） is proposed. By splicing a section of the homemade RPCF between two segments of single mode fibers （SMFs）, a simple modal interferometer is presented and experimentally demonstrated. Owing to the effects of the collapsed region, the ring modes in RPCF can be effectively activated. To our knowledge, it is the first time to demonstrate the modal interferometer based on the interference between the ring modes, which is different from the previously reported interferometers based on the interference between core modes or cladding modes. The temperature and strain characteristics of the interferometers with different lengths of RPCF are investigated.     

长周期光纤光栅的折射率敏感特性

利用光波导的耦合模理论分析了长周期光纤光栅(LPFG)的折射率传感特性,给出了LPFG 的谐振波长相对于环境折射率变化时的漂移量解析表达式.对 LPFG 的折射率传感特性进行了数值模拟.结果表明:在光栅周期不变的情况下,当包层折射率小于且接近外界环境折射率时,波长的漂移量增大,且对应的模次越高、包层半径越小、包层折射率越小,波长漂移量越大,即 LPFG 对应于外界折射率传感灵敏度得到显著提高;当外界环境折射率大于包层折射率时,光栅的谐振波长将近似不变.     

Characterization of external refractive index sensitivity of a photonic crystal fiber long-period grating

Long-period gratings(LPGs) are fabricated in a photonic crystal fiber(PCF) using the symmetric pointby-point CO2 laser irradiation method to explore the sensitivity characterization of PCF–LPG. Numerical simulation is used to guide the investigation. It is found that the refractive index(RI) sensitivity of PCF–LPG depends on the coupled cladding modes as well as the coupled resonance wavelength(RW) of the LPG.Experimental studies show that the longer the RW, the higher the RI sensitivity for the same cladding mode.At similar RWs, the lower the cladding mode, the higher the RI sensitivity of PCF–LPG.     

Photonic crystal fiber tip interferometer for refractive index sensing

In this paper we present an interferometer based on photonic crystal fiber (PCF) tip ended with a solid silica-sphere for refractive index sensing. The sensor is fabricated by splicing one end of the holey PCF to a single mode fiber (SMF) and applying arc at the other end to form a solid sphere. The sensor has been experimentally tested for refractive index and temperature sensing by monitoring its wavelength shift. Measurement results show that the sensor has the resolution of the order of 8.7×10(-4) over the refractive index range of 1.33-1.40, and temperature sensitivity of the order of 10 pm/°C in the range of 20-100 °C.     

Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating

An alternative all-fiber sensor for simultaneous strain and temperature measurement based on a photonic crystal fiber (PCF) spliced between single-mode fibers cascaded with a long period grating (LPG) is proposed. By collapsing the air holes at two splicing regions along the PCF, a simple but effective modal-interference (MI) is occurred between the core and cladding modes of the PCF. Due to the different responses on the changes of strain and temperature on the MI and the cascaded LPG, the strain and temperature can be measured simultaneously. Experimental results show that the sensing resolution of 9.1 με in strain measurement is experimentally achieved over a range of 2640 με, while the temperature sensing resolution is 0.27 °C within a range of 30-100 °C.     

Detection of cancer affected cell using Sagnac interferometer based photonic crystal fiber refractive index sensor

Optical and Quantum Electronics - A complex studies of optoelectronics, non-linear optical and laser stimulated piezoelectric features of chalcogenide powder-like chalcogenide crystals pure and...     

Simultaneous measurement of refractive index and temperature using dual-period grapefruit microstructured fiber grating

By cascading the long period fiber grating (LPFG) and fiber Bragg grating (FBG) in grapefruit microstructured fiber, a novel dual-period fiber grating sensor is proposed. The refractive index and temperature are measured simultaneously by using the different sensitivity of FBG and LPFG. The relationship between dual-period fiber grating transmission spectrum and refractive index, resonant wavelengths and temperature are analyzed theoretically, respectively. The simulation results show that the accuracy of the sensor in measuring refractive index and temperature is estimated to be 2319.6 nm/RIU in a range from 1.33 to 1.36 and 0.017 nm/°C from 0 °C to 100 °C, respectively. Thus, the sensor has high refractive index sensitivity, and can provide the theoretical foundation for the optical fiber biosensor.     

Hybrid fiber interferometer for simultaneous measurement of displacement and temperature

A hybrid fiber interferometer sensing configuration for displacement and temperature measurements is proposed and experimentally demonstrated that is constructed by splicing a short section of polarization maintaining optical fiber to an end-cleaved single mode optical fiber with a tapering structure. The reflected spectrum changes with the variation of displacement and temperature. The sensing configuration uses the method of wavelength and intensity modulations for displacement and temperature measurements, respectively, to which the sensitivities are 0.01392 nm/μm, 0.0214 d Bm/μm,-0.09136 nm∕°C, and 0.15795 d Bm/°C. Experimental results show that displacement and temperature can be measured simultaneously by demodulating the reflected spectrum.     

Temperature sensor based on an isopropanol-sealed photonic crystal fiber in-line interferometer with enhanced refractive index sensitivity

We fabricate a simple, compact, and stable temperature sensor based on a liquid-sealed photonic crystal fiber (PCF) in-line nonpolarimetric modal interferometer. Different from other reported PCF devices, it does not need expensive polarimetric devices, and the liquid is sealed in one fiber. The device consists of a stub of isopropanol-filled PCF spliced between standard single-mode fibers. The temperature sensitivity (-166 pm/°C) increases over an order of magnitude compared with those of the previous sensors based on air-sealed PCF interferometers built via fusion splicing with the same mechanism. In addition, the refractive index sensitivity also increases. Higher temperature sensitivity can be realized by infiltrating some liquid having a higher thermo-optic coefficient into the microholes of the PCF.     

基于光子晶体光纤模间干涉的折射率测量灵敏度分析

通过理论分析和数值模拟,研究了一种基于光子晶体光纤(PCF)模间干涉的干涉计的灵敏度.根据光纤模间干涉理论,结合光子晶体光纤的归一化频率,分析了PCF干涉计测量气体折射率的原理,得到一个可以衡量PCF干涉计灵敏度的参数δn_s.通过对该参数物理意义的分析可以得出,PCF纤芯附近第一层气孔对灵敏度影响最大.相比于常规气孔结构,把PCF第一层气孔变为面积更大的圆与椭圆复合孔,可显著提高传感灵敏度.     

Sampled fiber Bragg grating for simultaneous refractive-index and temperature measurement

We present a novel scheme for simultaneous measurement of temperature and refractive index by use of a single sampled fiber Bragg grating (SFBG). The intrinsic nature of a SFBG that possesses both fiber Bragg grating and long-period grating spectral responses permits the temperature effect to the measured solely from the former, whereas the refractive-index information is extracted from the latter. Using such a dual-parameter sensor, we successfully demonstrated measurement of the dependence on temperature of the refractive index of an aqueous solution of sucrose.     

Concentration and refractive index sensor for methanol using short period grating fiber

This paper reports on the spectral (response) characteristics of fiber Bragg grating sensor to various methanol concentrations. A complete experimental analysis on the use of Ge-B co-doped fiber Bragg grating sensor for a concentration and refractive index measurement is presented. The spectral changes in the grating response due to variation of concentration have been investigated in relation to new sensing configurations. The results also highlight the possibilities of using the sensor for medical and biological applications.     

Simultaneous temperature and refractive index measurement of liquid using a local micro-structured fiber Bragg grating

An alternative solution for the simultaneous measurement of temperature and refractive index is presented. A local micro-structured fiber Bragg grating（LMSFBG）is formed as the sensing head,in which a standard grating is etched by HF.According to the phase shift theory,the main spectral change of the LMSFBG is the formation of a narrow allowed band,which is strongly dependent on the etching features and the surrounding refractive index.As such,the temperature and refractive index measurements can be achieved by the shifts of the double peaks and narrow allowed band,and their fitting linearity coefficients are 0.996 and 0.994,respectively.Thus,the reflection and transmission peaks of the LMSFBG have a good linear relationship with temperature and refractive index.     

Long period gratings written in large-mode area photonic crystal fiber

We report for the first time, to the best of our knowledge, on the fabrication and characterization of CO₂-laser written long-period gratings in a large-mode area photonic crystal fiber with a core diameter of 25 μm. The gratings have low insertion losses (<1 dB) and high attenuation (>10 dB) at the resonant wavelengths, making them particularly interesting for high power applications.     

Asymmetrical tapered SMS fiber coupler for simultaneous measurement of temperature and refractive index and its application for biosensing

An asymmetrical tapered singlemode–multimode–singlemode(SMS) fiber coupler based on two parallel physical contact SMS fiber structures was proposed. Since the coupler includes modes both from fiber core and cladding,two dips of the transmission spectrum exhibit different sensing characteristics to the surrounding temperature and refractive index(RI) change, which allows the use of the standard matrix inversion method to determine temperature and RI simultaneously. The temperature sensitivities of 0.0498 and 0.0324 nm/℃ and RI sensitivities of 1151.76 and 1325.66 nm/RIU have been achieved, respectively. For biosensing application, with the functionalized fiber coupler sensor, a human chorionic gonadotropin concentration of 0.05 mIU/mL has been detected for a wavelength shift of 0.2 nm with good stability and excellent selectivity. The developed tapered SMS fiber coupler structure has advantages of simultaneous measurement of two independent parameters,simple configuration, low cost, and good repeatability that offer a great potential for medical diagnostics.     

光子晶体光纤长周期光栅的谐振波长特性研究

利用有限差分法和耦合模理论分析了光子晶体光纤结构参数等因素对光栅周期调节长周期光栅谐振波长作用的影响,结果表明:对于同种光纤,可通过增大或减小光栅周期来减小或增大谐振波长;若占空比f增大或减小,可通过减小或增大光栅周期来保持谐振波长不变;若比例系数M增大或减小,可以成正比增大或减小光栅周期来保持谐振波长不变;在只是空气孔层数增加的系列光纤中,在长波处,为取得同一谐振波长,光栅周期需要增大数个m,但在短波处则正好相反;内层气孔对光栅周期调节谐振波长的作用影响较大,而第5层以外各层的影响十分微弱。综合利用这些规律,可以快捷地选择合适的光栅周期,高效率地制备有合适谐振波长的光子晶体光纤长周期光栅。     

Simultaneous measurement of refractive index and temperature based on a reflection-mode long-period grating and an intrinsic Fabry-Perot interferometer sensor

We have demonstrated a single fiber probe for simultaneous measurement of external refractive index and temperature based on two interferometers: a reflection-mode long-period grating (LPG) for refractometry and an intrinsic Fabry-Perot interferometer (IFPI) for temperature measurement. Since the output signal of the combined structure is a superposition of signals produced by both sensors, which have different spatial frequencies, the original signals needed for the index and temperature measurements can be separated and recovered through digital filters.     

基于表面等离子体共振和定向耦合的D形光子晶体光纤折射率和温度传感器

利用光子晶体光纤结构的灵活性和性能的优越性, 设计了一种基于D形光子晶体光纤的折射率和温度传感器. 在D形光子晶体光纤表面抛磨并镀上金纳米薄膜, 作为表面等离子体共振传感通道用来测量液体折射率; 在包层的一个空气孔中填充温敏液体甲苯, 作为定向耦合通道实现对温度的测量. 进一步的数值计算发现, 基于定向耦合效应的温度传感和基于表面等离子体共振的折射率传感相互独立, D形光子晶体光纤同时进行折射率和温度传感检测. 在各向异性的完美匹配层边界条件下利用全矢量有限元法对该传感器特性进行了数值研究, 发现D形光子晶体光纤的空气孔直径决定了定向耦合吸收峰的中心波长和温度传感的灵敏度, 金薄膜的厚度和D形结构的抛磨深度仅影响表面等离子体共振峰的相对强度. 结果表明: 该传感器在-10–80 ℃的温度范围内具有11.6 nm/℃的温度灵敏度, 在1.34–1.44折射率范围内折射率灵敏度最高可达26000 nm/RIU.