Silylated gallium and indium chalcogenide ring systems as potential precursors to ME (E=O, S) materials

The reaction of R₃M (M=Ga, In) with HESiR′₃ (E=O, S; R′₃=Ph₃, ⁱPr₃, Et₃, ^tBuMe₂) leads to the formation of (Me₂GaOSiPh₃)₂ (1); (Me₂GaOSi^tBuMe₂)₂ (2); (Me₂GaOSiEt₃)₂ (3); (Me₂InOSiPh₃)₂ (4); (Me₂InOSi^tBuMe₂)₂ (5); (Me₂InOSiEt₃)₂ (6); (Me₂GaSSiPh₃)₂ (7); (Et₂GaSSiPh₃)₂ (8); (Me₂GaSSiⁱPr₃)₂ (9); (Et₂GaSSiⁱPr₃)₂ (10); (Me₂InSSiPh₃)₃ (11); (Me₂InSSiⁱPr₃)_n (12), in high yields at room temperature. The compounds have been characterized by multinuclear NMR and in most cases by X-ray crystallography. The molecular structures of (1), (4), (7) and (8) have been determined. Compounds (3), (6) and (10) are liquids at room temperature. In the solid state, (1), (4), (7) and (9) are dimers with central core of the dimer being composed of a M₂E₂ four-membered ring. VT-NMR studies of (7) show facile redistribution between four- and six-membered rings in solution. The thermal decomposition of (1)–(12) was examined by TGA and range from 200 to 350°C. Bulk pyrolysis of (1) and (2) led to the formation of Ga₂O₃; (4) and (5) In metal; (7)–(10) GaS and (11)–(12) InS powders, respectively.      

Über die Reaktionen von 2-Cyclohexenonen mit Ammoniumthiocyanat bzw. Thioharnstoff Über Heterocyclen, 59. Mitteilung

The 2-cyclohexenones1 a, b andc react with NH₄SCN to give 3,5,5-trimethyl-, 3-methyl-5-phenyl- and 3-methyl-2-cyclohexeniminiumthiocyanates8 a, b andc resp. (i.e. salts of α,β-unsaturated imines) and not the expected diazabicyclononane-thiones5 a, b andc. Alternative formulae for the1—NH₄SCN-condensates are discussed and rejected on the basis of IR- and NMR-spectra and the chemical properties of5 a-c. By action of thiourea inMeOH/NaOMe the 2-cyclohexenones1a, d ande are transformed into 1-hydroxy-5,7,7-trimethyl-, 1-hydroxy-5-methyl- and 1-hydroxy-2,4-diazabicyclo[3.3.1]nonane-3-thiones5 a, d ande resp. The structure of the diazabicyclononane-thiones5 a, d ande is established by means of NMR-, IR- and MS-spectra. 8 a-c and5 e showed no significant herbicidal and only small fungicidal (8 b, c) and insecticidal (8 a-c) activities in screening tests.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

New group 14 element(IV) β-diiminates and a Sn(II) analogue

Seven group 14 element(IV) compounds 2-7 have been prepared, derived either (2-5) from the potassium β-diketiminate K(L) [L = {N(Ar)C(Me)}₂CH, Ar = C₆H₃Prⁱ₂-2,6] (1) or the known lithium β-dialdiminate Li(L′)] [L′ = {N(Ar)C(H)}₂CPh, Ar = C₆H₃Prⁱ₂-2,6]. Treatment of 1 with Bu^tC(O)Cl, Me₃SiCl, Ph₃SnCl, or Me₃SnCl afforded {N(Ar)C(Me)}₂C(H)C(O)Bu^t (2), [ArNC(Me)C(H)C(Me)N(Ar)SiMe₃] (3), [HN(Ar)C(Me)C(H)C(CH₂SnPh₃)N(Ar)] (4), or (5), respectively. Compounds 4 and 5 are remarkable as they have arisen from a tautomer of 1; crystalline centrosymmetric 5 has a fused tricyclic structure, a central eight-membered ring flanked by two six-membered rings. The compounds [GeCl₂(L′)(OGeCl₃)] (6) or [SnCl(L′)Me₂] (7), the first group 14 metal β-dialdiminates, were obtained from Li(L′) and (GeCl₃)₂O or Me₂SnCl₂, respectively. The Sn(II) compound SnCl(L′) (8) was prepared from SnCl₂ and K(L′). The molecular structures of the crystalline compounds 3-8 are reported.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Reactions of dilithiobutadienes with monochlorosilanes: Observation of facile loss of organic groups from silicon

Reactions of 1,4-dilithiobutadienes (from 1,4-diiodo-1,2,3,4-tetraethylbutadiene (1) and 2,2′-dibromobiphenyl (7) with t-BuLi) with Me₃SiCl gave siloles (3 and 9a) as the major products. No evidence for a disilylated butadiene was obtained. Use of higher molecular weight chlorosilanes ((allyl)Me₂SiCl, BnMe₂SiCl, and PhMe₂SiCl) with dibromide 7 gave dimethylsilole 9a and a silane (10a, 10b, or 10c) resulting from trapping of the organic group by the chlorosilane.     

Synthesis and structure of isopropyldimethylsilyl-substituted octamethyltitanocene

Reduction of isopropyldimethylsilyl-substituted titanocene dichloride [TiCl₂(η⁵-C₅Me₄SiMe₂Prⁱ)₂] (1) by excess magnesium in the presence of excess bis(trimethylsilyl)ethyne (btmse) in tetrahydrofuran at 60 °C yielded a mixture of products amongst them only the trinuclear Ti-Mg-Ti hydrido-bridged complex Mg[Ti(μ-H)₂(η⁵-C₅Me₄SiMe₂Prⁱ)]₂ (3) was isolated and characterized. The precursor of titanocene, [Ti(η⁵-C₅Me₄SiMe₂Prⁱ)₂(η²-btmse)] (6), was obtained from the identical system which, after initial formation of [TiCl(η⁵-C₅Me₄SiMe₂Prⁱ)₂] (2), reacted at −18 °C overnight and then the solution was rapidly separated from the remaining magnesium. Titanocene [Ti(η⁵-C₅Me₄SiMe₂Prⁱ)₂] (7) was obtained by thermolysis of 6 at 75 °C in vacuum. Crystal structures of 1, 2, 3, 6, and 7 were determined.     

The use of Pearlman's catalyst for the oxidation of Si–H bonds. Synthesis, structures and acid-catalysed condensation of novel α, ω-oligosiloxanediols HOSiMe2O(SiPh2O)nSiMe2OH (n = 1−4)

The preparation of α , ω-oligosiloxanediolsHOSiMe₂O(SiPh₂O)_nSiMe₂OH(5–8; n=1–4) by the mild oxidation of thecorresponding organo-H-siloxaneHSiMe₂O(SiPh₂O)_nSiMe₂H(1–4; n = 1–4) using Pearlman's catalyst,Pd(OH₂)/C, is reported. Compounds 5–7 possessnew hydrogen bonding modes, whose influences on the Si–O chainconformation are discussed and compared with the published analoguesHOSiPh₂OSiPh₂OSiPh₂OH (9),HOSit-Bu₂OSiMe₂OSit-Bu₂OH (10) andHOSiPh₂OSiPh₂OSiPh₂OSiPh₂OH(11), whereas compound 8 appears to be polycrystalline.Preliminary results of the HCl-catalysed condensation of5–8 are also reported, which provided complex mixtures ofoligomeric products in the case of 5 and 8, and (almost)exclusivelycyclo-(Me₂SiO)₂(Ph₂SiO)₂(12) andcyclo-(Me₂SiO)₂(Ph₂SiO)₃(13) in the case of 6 and 7, respectively. Compounds5–7 and 13 were investigated by X-raycrystallography.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

1,3-Dichloro-2-butene: a useful precursor for the 2-butene-1,3-dianion and its corresponding 1,3-dipolar synthon

The reaction of 1,3-dicloro-2-butene (1; 5:1 Z:E-mixture) with lithium powder and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 1% molar) in the presence of different electrophiles [EtCHO, PrⁱCHO, Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, (c-C₃H₅)₂CO, Me₃SiCl] in THF at temperatures ranging between −78 and −50°C gives, after hydrolysis with water, the corresponding products 2 in different Z:E-ratios depending on the electrophile used. Treatment of some diols 2 with hydrochloric acid gives dienic alcohols 3 or substituted dihydropyrans 4, depending on the structure of the starting diol. Finally, the same dichlorinated starting material is transformed into the corresponding allylic amines derived from morpholine and benzyl methyl amine and submitted to the same DTBB-catalysed lithiation as above, so after reaction with different electrophiles [Bu^tCHO, c-C₆H₁₁CHO, Me₂CO, Et₂CO, (CH₂)₄CO, (CH₂)₅CO, Me₃SiCl] and final hydrolysis with water, compounds 7 are isolated having a Z-configuration. A mechanistic explanation for this behaviour is given.     

Synthesis,spectroscopic characterization,X-ray crystal structure,biological screening and catalytic studies of organotin(IV) carboxylates of 3-(4-cyanophenyl) acrylic acid

A series of six organotin(IV) carboxylates [Me₂SnL₂] (1), [n-Bu₂SnL₂] (2), [n-Oct₂SnL₂] (3), [Me₃SnL] (4), n-Bu₃SnL (5) and [Ph₃SnL] (6), where L = 3-(4-cyanophenyl) acrylic acid have been synthesized and characterized by elemental analysis, FT-IR and NMR (¹H, ¹³C). The complex (4) was also analyzed by single crystal X-ray analysis which showed distorted trigonal bipyramidal geometry with polymeric bridging behavior. The complexes 1–6 were screened for antimicrobial activities and cytotoxicity. The results showed significant activity with few exceptions. The catalytic activity of complexes was assessed in transesterification reaction of Brassica campestris oil (triglycerides) to produce biodiesel (fatty acid methyl esters). The results showed that triorganotin(IV) complexes exhibited good catalytic activity than their di-analogues.     

Über das 7-Methyl-4,5-diphenyl-4,4a,5,6,7,8,10,10a-octahydro-7,10a-methano-pyrimido[4,5—d][1,3]-diazocin-2,9(1H,3H)-dion

The condensation product (C₁₁H₁₂N₂O) _x synthesized byZigeuner andBrunetti ³ from urea and 4-phenyl-3-buten-2-one is a methanopyrimidodiazocinedione (7, title compound), which has the conformation formula7 K. The formulae7 and7K are constituted taking as a basis the 100 MHz-NMR-spectrum (with double resonance experiments) and the mass spectrum of7; two possible ways for the formation of7—genetic an ureylenchinazolinone—from urea and 4-phenyl-3-buten-2-one are suggested.     

Guanidinate derivatives of rare-earth metals. The synthesis, properties, and molecular structures of the complexes {(Me3Si)2NC(NPri)2}3Nd, {(Me3Si)2NC(NCy)2}3Lu, and {(Me3Si)2NC(NPri)2}2HC(NPri)2}Nd

The reactions of anhydrous LnCl₃ (Ln = Nd or Lu) with three equivalents of {(Me₃Si)₂NC(NR)₂}Li (R = Prⁱ or Cy; Cy is cyclohexyl) in THF afforded the corresponding tris(guanidinate) derivatives of lanthanides {(Me₃Si)₂NC(NR)₂}₃Ln (Ln = Nd, R = Prⁱ, (1); Ln = Lu, R = Cy (2)), which were isolated after the recrystallization from hexane in 82 and 88% yields, respectively. The complex {(Me₃Si)₂NC(NCy)₂}₂{HC(NCy)₂}Nd (3) containing two guanidinate ligands and one formamidinate ligand was isolated in attempting to synthesize the bis(guanidinate) borohydride derivative by the reaction of {(Me₃Si)₂NC(N-Cy)₂}Na with Nd(BH₄)₃(THF)₂ (in a molar ratio of 2: 1) in THF. This complex is apparently formed as a result of the fragmentation and redistribution of the guanidinate ligands. The X-ray diffraction study showed that in the crystalline state compounds 1–3 are mononuclear complexes containing no coordinated Lewis bases.     

Amino Acid Functionalization of {Ni6PW9}-Based Clusters Under Hydrothermal Conditions

Two novel hexa-nickel(II)-substituted Keggin-type {Ni₆PW₉}-based tungstophosphates [Ni₆(μ ₃-Tris)(en)₃(Pr)(damp)(H₂O)₂(B-α-PW₉O₃₄)]·10H₂O (1) and [Ni₆(μ ₃-Tris)(en)₃(damp)₂(H₂O)₂(B-α-PW₉O₃₄)]·7H₂O (2) (en = ethylenediamine, Pr = CH₃CH₂COO^?, damp = 2-aminoisobutyrate, Tris = pentaerythritol) were hydrothermally synthesized and characterized by IR spectra, elemental analyses, powder X-ray diffraction, thermogravimetric analyses, and single-crystal X-ray diffraction. Crystal data for 1: orthorhombic, Pca2₁, a = 21.6962(7) Å, b = 20.6398(5) Å, c = 14.7825(4) Å, β = 90º, V = 6619.7(3) Å³, Z = 4; for 2: orthorhombic, Pca2₁, a = 21.6978(9) Å, b = 20.6658(7) Å, c = 14.7767(4) Å, β = 90º, V = 6625.9(4) Å³, Z = 4. 1 consists of a {Ni₆(μ ₃-Tris)(en)₃(Pr)(damp)(H₂O)₂}⁹⁺ core and a [B-α-PW₉O₃₄]^9? (PW₉) unit and is covalently functionalized by one Pr and one damp, as well as en and Tris ligands. The structure of 2 is the same to 1 except that the Pr anion in 1 is substituted by the other damp ligand. Most interestingly, 1 contains four kinds of organic ligands, while 2 includes three kinds of organic ligands, which are first observed in polyoxometalate chemistry.     

Synthesis and properties of guanidinate derivatives of rare-earth metals. Molecular structures of the { (Me3Si)2NC(NPri)2}2Y(µ-Cl)2Li(THF)2, [{ (Me3Si)2NC(NPri)2}2SmCl]2 and {(Me3Si)2NC(NPri)2} Sm(µ3-BH4)2(DME) complexes

The reaction of anhydrous SmCl₃ with two equivalents of lithium N,N′-diisopropyl-N″-bis(trimethylsilyl)guanidinate in THF afforded the [{(Me₃Si)₂NC(NPrⁱ)₂}₂SmCl]₂ complex (1) in 82% yield. Analogous reactions with YCl₃ and GdCl₃ produced the ate-complexes { (Me₃Si)₂NC(NPrⁱ)₂}₂Ln(µ-Cl)₂Li(THF)₂ (Ln = Y (2) and Gd (3)). The structures of complexes 1 and 2 were established by X-ray diffraction. The reaction of complex 1 with NaBH₄ in hexane (20 °C) followed by treatment with dimethoxyethane yielded the unexpected product, { (Me₃Si)₂NC(NPrⁱ)₂}Sm(µ³-BH₄)₂(DME) (5). X-ray diffraction study showed that both borohydride ligands in complex 5 are tridentate.     

First MnIII complexes with tetradentate (N2O2) Schiff bases and tricyanomethanide: synthesis,crystal structure,and magnetic properties

The first Mn^III complexes with Schiff bases and tricyanomethanide-anion were synthesized: [Mn(salen)C(CN)₃(H₂O)] (1), [Mn(5-Brsalen)C(CN)₃(H₂O)] (2), [Mn(salpn)C(CN)₃(H₂O)] (3), [Mn(3-MeOsalen)C(CN)₃(H₂O)] (4), [Mn(5-Brsalen)(MeOH)(H₂O)][C(CN)₃] (5), and [Mn(3-MeOsalpn)(H₂O)₂][C(CN)₃] (6), where SalenH₂ is N,N′-bis(salicylidene)ethylenediamine, 5-BrsalenH₂ is N,N′-bis(5-bromosalicylidene)ethylenediamine, SalpnH₂ is N,N′-bis-(salicylidene)-1,3-diaminopropane, 3-MeOsalenH₂ is N,N′-bis(3-methoxysalicylidene)-ethylenediamine, 3-MeOsalpnH₂ — N,N′-bis(3-methoxysalicylidene)-1,3-diaminopropane. The tricyanomethanide anion in complexes 1–4 acts as a the terminal ligand, whereas in complexes 5 and 6 tricyanomethanide is not coordinated by Mn^III and acts as an out-of-sphere counterion. The structures of complexes 1–4 are characterized by the formation of dimers due to hydrogen bonds between the water molecules and oxygen atoms of the Schiff bases. The Mn...Mn distances inside the dimers are 4.69–5.41 Å. Complex 6 has a zigzag chain structure consisting of the [Mn(3-MeOsalpn)(H₂O)₂]⁺ cations bound by double bridging aqua ligands. The study of the magnetic properties of complexes 1, 3, 4, and 6 showed the existence of antiferromagnetic interactions between the Mn^III ions through the system of hydrogen bonds.     

Synthesis, structural characterization and reactivity of new tin bridged ansa-bis(cyclopentadiene) compounds: X-ray crystal structures of Me2Sn(C5Me4R-1)2 (R = H, SiMe3)

The organo-tin compounds, Me₂Sn(C₅H₄R-1)₂ (R = Me (1), Prⁱ (2), Bu^t (3), SiMe₃ (4)) and Me₂Sn(C₅Me₄R-1)₂ (R = H (5), SiMe₃ (6)), were prepared by the reaction of Me₂SnCl₂ with the lithium or sodium derivative of the corresponding cyclopentadiene. Compounds 1-6 have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn). In addition the molecular structures of 5 and 6 were determined by single crystal X-ray diffraction studies. The transmetalation reaction of 1-6 with ZrCl₄ or [NbCl₄(THF)₂] gave the corresponding metallocene complexes in high yields.     

Synthese,Kristallstruktur und Konformation vontrans-[2.2](1,2)Ferrocenophan und seinen 1-Hydroxyderivaten

Starting from1-(dimethylaminomethyl)-2-iodo-ferrocene (3) [2.2](1,2)ferrocenophane (2) was prepared in an 8-step synthesis with 17% overall yield. Both from the oxoderivative12 and the ferrocenophane2 puretrans-isomers (12b and2b, resp.) were obtained; the former (12b) was reduced to a separable mixture ofexo andendo 1-hydroxy-ferrocenophanes13a andb, resp. (～ 3:7), the configurations of which were assigned by the LIS-method. X-ray crystal structure analysis of2b revealed a centrosymmetrical chair conformation. From¹H- and¹³C-NMR spectra both for2b and for the hydroxyderivatives13 a rigidexo-exo chair conformation was deduced.     

Synthesis, spectroscopic characterization and structure-activity relationship of some phosphoramidothioate pesticides

In this work, some phosphoramidothioates (PATs) with the general formula of (CH₃O)₂P(S)X and (CH₃O)(CH₃S)P(O)X, where, X = NH₂ (1 & 6), NH(CH₃) (2 & 7), N(CH₃)₂ (3 & 8), N(Et)₂ (4 & 9), (CH₃CH₂O)₂P(S)NH(CH₃) (5) and (CH₃CH₂O)(CH₃CH₂S)P(O)NH(CH₃) (10), were synthesized and characterized by ³¹P, ³¹P{¹H}, ¹³C and ¹H NMR spectroscopy. The ability of the compounds to inhibit AChE was predicted by PASS software (version 1.193). They were also experimentally evaluated by a modified Ellman??s assay. The structure-activity relationship (SAR) between IC50 and some physico-chemical properties such as lipophilicity (logP), electronic and steric effects of the compounds was studied. The logP values were experimentally determined by the shake-flask (gas chromatography) method. Inhibitory potency for the compounds 1?C10 was 1 (3.38 mM) > 2 (3.97 mM) > 3 (4.75 mM) > 4 (6.00 mM) > 5 (5.51 mM) > 6 (0.07 mM) > 7 (0.23 mM) > 8 (0.39 mM) > and 9 (0.55 mM) > 10 (0.51 mM), respectively. IC₅₀ and logP parameters of the P=O moiety were more than the P=S moiety in PAT analogues.     

Copper(II), iron(III) and cobalt(III) complexes of the pendent-arm cyclam derivative 6,6,13-trimethyl-13-amino-1,4,8,11-tetraazacyclotetradecane

The interaction of Cu(II), Fe(III) and Co(III) with 6,6,13-trimethyl-13-amino-1,4,8,11-tetraazacyclotetradecane (L ³ ) incorporating a pendent amine group has led to isolation of the new octahedral complexes [Cu(HL ³ )(ClO₄)₂]Cl·H₂O (1), [Fe(L ³ )Cl](S₂O₆)·H₂O (2), [Co(L ³ )Cl](ClO₄)_1.5Cl_0.5·0.25H₂O (3), [Co(HL ³ )Cl₂](ClO₄)₂·H₂O (4) and [Co(L ³ )Cl]₂(S₂O₄)(ClO₄)₂ (5). In (1) the copper ion occupies the macrocyclic cavity of protonated (–NH₃ ⁺) L ³ which is present in its trans-III configuration; weakly bound ClO₄ ^? ligands occupy the axial positions. The X-ray structure of (2) showed that Fe(III) occupies the N₄-macrocyclic cavity of L ³ in a trans-III configuration, with the pendent amine group binding in an axial position. The remaining axial position is occupied by a Cl^? ligand. Chromatography of the product obtained from the reaction of Na₃[Co(CO₃)₃] with L ³ yielded three fractions. Fraction 1 yielded crystals (3) composed of three crystallographically independent species incorporating cations of type [Co(L ³ )Cl]²⁺ with very similar structures; in each case the macrocyclic ring nitrogens of L ³ are bound to the Co(III) in an asymmetric cis-fashion. Fraction 2 yielded the trans-III octahedral cationic complex (4) incorporating L ³ in its protonated form. The Co(III) complex (5) from fraction 3 shows a different coordination arrangement to the products from fractions 1 or 2. The macrocyclic ring coordinates in its trans-III form, but the axial sites in this case are occupied by the pendent-NH₂ group and a Cl^? ligand.