Synthesis of dimethyl carbonate from methanol and supercritical carbon dioxide

The synthesis of dimethyl carbonate (DMC) from methanol and supercritical carbon dioxide over various base catalysts has been studied. Compounds of group-I elements (Li, Na and K) were used as base catalysts. The promoter and the dehydrating agent were also used to enhance the yield of DMC. The effects of the catalysts, promoter and dehydrating agent on the yield of DMC were investigated. By-products such as dimethyl ether (DME) and C₁–C₂ hydrocarbons were formed with the DMC as a main product. The yield of DMC with different alkali metal catalysts ranked in the following order: K > Na > Li. The catalysts of the metal-CO₃ compounds were more effective than the metal-OH compounds in DMC synthesis. The maximum DMC yield reached up to about 12 mol% in the presence of K₂CO₃ (catalyst), CH₃I (promoter) and 2,2-dimethoxypropane (dehydrating agent) at 130–140°C and 200 bar. The reaction mechanism of DMC synthesis from methanol and supercritical carbon dioxide was proposed.     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbon Dioxide

Introduction Dimethyl carbonate (DMC) is an important carbon-ylating and methylating agent substituting dimethyl sul-fate and toxic phosgene, and an intermediate for higher carbonates and carbamates.1 In addition, it is also a promising octane enhancer.2 The widely used method of its preparation is the oxidative carbonylation of metha-nol by carbon monoxide with copper(II) or palladium(II) catalysts.3 Recently, the utilization of carbon dioxide as the raw material for DMC synthesis has bee…     

Protic ionic liquid-promoted synthesis of dimethyl carbonate from ethylene carbonate and methanol

In this work,the protic ionic liquid[DBUH][Im](1,8-diazabicyclo[5.4.0]-7-undeceniumimidazolide)was developed as an efficient catalyst for the transesterification of ethylene carbonate with methanol to produce dimethyl carbonate.At 70℃,up to 97%conversion of ethylene carbonate and 91%yield of dimethyl ca rbonate were obtained with 1 mol%[DBUH][Im](relative to ethylene carbonate)as catalyst in 2 h.Even at room temperature,the conversion of ethylene carbonate can reach 94%and the yield of dimethyl carbonate can approach 81%for 6 h.Catalytic mechanism investigation showed the high catalytic efficiency of this ionic liquid results from the synergistic activation effect,wherein the cation can activate ethylene carbonate and the anion can activate methanol through hydrogen bond formatio n.Although the reusability of the ionic liquid need to be further improved,high efficiency and comme rcial availability of[DBUH][Im]render it a promising catalyst for the preparation of dimethyl carbonate.     

Critical temperatures and pressures of reacting mixture in synthesis of dimethyl carbonate with methanol and carbon dioxide

Critical temperatures and pressures of nominal reacting mixture in synthesis of dimethyl carbonate （DMC） from methanol and carbon dioxide （quaternary mixture of carbon dioxide ＋ methanol ＋ water ＋ DMC） were measured using a high-pressure view cell. The results suggested that the critical properties of the reacting mixture depended on the reaction extent as well as its initial composition （initial ratio of carbon dioxide to methanol）. Such information is essential for determining the reaction conditions when one intends to carry out the synthesis of DMC with CO2 and methanol under supercritical conditions.     

Development in the green synthesis of cyclic carbonate from carbon dioxide using ionic liquids

This brief review presents the recent development in the synthesis of cyclic carbonate from carbon dioxide (CO₂) using ionic liquids as catalyst and/or reaction medium. The synthesis of cyclic carbonate includes three aspects: catalytic reaction of CO₂ and epoxide, electrochemical reaction of CO₂ and epoxide, and oxidative carboxylation of olefin. Some ionic liquids are suitable catalysts and/or solvents to the CO₂ fixation to produce cyclic carbonate. The activity of ionic liquid is greatly enhanced by the addition of Lewis acidic compounds of metal halides or metal complexes that have no or low activity by themselves. Using ionic liquids for the electrochemical synthesis of the cyclic carbonate can avoid harmful organic solvents, supporting electrolytes and catalysts, which are necessary for conventional electrochemical reaction systems. Although the ionic liquid is better for the oxidative carboxylation of olefin than the ordinary catalysts reported previously, this reaction system is at a preliminary stage. Using the ionic liquids, the synthesis process will become greener and simpler because of easy product separation and catalyst recycling and unnecessary use of volatile and harmful organic solvents.     

离子液体中CO_2与炔醇在温和条件下高效合成-亚甲基环状碳酸酯

本文研究了离子液体1-乙基-3-甲基咪唑二乙基磷酸酯([EMIM][(EtO)2PO2])中醋酸银(AgOAc)对CO2与炔醇反应生成-亚甲基环状碳酸酯的催化性能,发现该反应可以在温和的条件下进行.在AgOAc/[EMIM][(EtO)2PO2]催化体系中,30℃、4 MPa CO2压力下,反应6h时-亚甲基环状碳酸酯的产率为97%;当压力降到0.5 MPa时,反应24 h产物产率为65.8%.[EMIM][(EtO)2PO2]在反应中起到了溶剂和碱的双重作用.AgOAc/[EMIM][(EtO)2PO2]体系重复利用3次活性仅略有下降.另外,该体系也可用于催化CO2与其他炔醇(3-甲基-1-戊炔-3-醇、3,5-二甲基-1-己炔-3-醇和2-苯基-3-丁炔-2-醇)的反应.     

An in situ infrared study of dimethyl carbonate synthesis from carbon dioxide and methanol over well-shaped CeO2

The mechanism of dimethyl carbonate(DMC) formation from CO_2 and methanol is investigated using three well-shaped CeO_2 catalysts, nanorod, nanocube and octahedron, which are packed with different crystal planes. In situ Fourier Transform Infrared Spectroscopy(FTIR) is employed to probe each reaction step in the DMC synthesis. The number of –OH groups and the species of CO_2 adsorptions on ceria surface have significant influence on the activity of ceria with different morphologies. Rod-ceria has favorable catalytic activity because of the large amount of –OH groups and the formation of bidentate carbonate species.     

Extraction of lanthanides from aqueous solution by using room-temperature ionic liquid and supercritical carbon dioxide in conjunction

For the first time, the study of a three-step extraction system of water/ionic liquid/supercritical CO2 has been performed. Extraction of trivalent lanthanum and europium from an aqueous nitric acid solution to a supercritical CO2 phase via an imidazolium-based ionic liquid phase is demonstrated, and extraction efficiencies higher than 87 % were achieved. The quantitative extraction is obtained by using different fluorinated beta-diketones with and without the addition of tri(n-butyl)phosphate. The complexation phenomenon occurring in the room-temperature ionic-liquid (RTIL) phase was evidenced by using luminescence spectroscopy.     

High yield synthesis of biodegradable poly(propylene carbonate) from carbon dioxide and propylene oxide

A novel SalenCo^III (2,4‐dinitrophenoxy) (Salen = N,N'‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamino) and 1,10‐phenanthroline monohydrate catalyst system was designed and employed for the copolymerization of CO₂ and propylene oxide (PO). The perfectly alternating copolymerization of CO₂ and PO proceeds effectively under middle temperature and pressure to yield poly(propylene carbonate) with a high yield and a high number average molecular weight of polymer. The structure of polymer was characterized by the IR and NMR measurements. The perfectly alternating copolymer was confirmed. The MALDI‐TOF spectrum insinuates that the copolymerization of CO₂ and PO was initiated by H₂O. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of dimethyl carbonate and propylene glycol from transesterification of propylene carbonate and methanol using quaternary ammonium salt catalysts

Summary The synthesis of dimethyl carbonate (DMC) was investigated through the transesterification of propylene carbonate (PC) with methanol using quaternary ammonium salt catalysts. The reaction was carried out in an autoclave at 120-140 oC under carbon dioxide pressure of 250-400 psig. The main by-product was propylene glycol. The quaternary salts of larger alkyl group and more nucleophilic counter anion exhibited higher catalytic activity. Kinetic studies were also performed to better understand the reaction mechanism. Quaternary ammonium chlorides immobilized on polystyrene supports were also tested for their possible uses as heterogeneous catalysts.     

Fixation of CO_2 by electrocatalytic reduction to synthesis of dimethyl carbonate in ionic liquid using effective silver-coated nanoporous copper composites

<正>With high surface area,open porosity and high efficiency,a catalyst was prepared and firstly employed in electrocatalytic reduction of CO_2 and electrosynthesis of dimethyl carbonate(DMC).The electrochemical property for electrocatalytic reduction of CO_2 in ionic liquid was studied by cyclic voltammogram(CV).The effects of various reaction variables like temperature,working potential and cathode materials on the electrocatalytic performance were also investigated.80%yield of DMC was obtained under the optimal reaction conditions.     

Chiral metal-containing ionic liquid:Synthesis and applications in the enantioselective cycloaddition of carbon dioxide to epoxides

A series of novel chiral metal-containing ionic liquids(CMILs) consisting of the cation of crown ether-chelated potassium/sodium and the anion of chiral amino acids were designed and synthesized.These new CMILs were used to catalyze the enantioselective cycloaddition of epoxides and carbon dioxide incorporating with the salenCo(OOCCCl3) to generate corresponding chiral cyclic carbonates under mild conditions.These new catalysts can be recycled at least five times without significant loss of activity and ena...     

Polymer‐supported pyridinium catalysts for synthesis of cyclic carbonate by reaction of carbon dioxide and oxirane

Polymer‐supported pyridinium salts, prepared by quaternarization of crosslinked poly(4‐vinylpyridine) with alkyl halides, effectively catalyze the reaction of carbon dioxide (1 atm) and glycidyl phenyl ether (GPE) to afford the corresponding five‐membered cyclic carbonate (4‐phenoxymethyl‐1,3‐dioxolan‐2‐one). Poly(4‐vinylpyridine) quarternarized with alkyl bromides show high catalytic activities, and the reaction of carbon dioxide (1 atm) and GPE at 100 °C affords 4‐phenoxymethyl‐1,3‐dioxolan‐2‐one quantitatively in 6 h. The rate constant in the reaction of GPE and carbon dioxide in N‐methyl pyrrolidinone using poly(4‐vinylpyridine) quarternarized with n‐butyl bromide (k_obs = 102 min^?1) is almost comparable with those for homogeneous catalysts with good activities (e.g., LiI), and the rate of the reaction obeys the first‐order kinetics. A used catalyst may be recovered by centrifugation, and the recycled catalyst also promotes the reaction of GPE and carbon dioxide. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5673–5678, 2007     

Enhancements of dimethyl carbonate synthesis from methanol and carbon dioxide: The in situ hydrolysis of 2-cyanopyridine and crystal face effect of ceria

This paper describes the effect of the in situ hydrolysis of 2-cyanopyridine and its derivatives on the synthesis of dimethyl carbonate (DMC) from CO₂ and methanol over CeO₂. 2-Cyanopyridine, with the highest electronic charge number of the carbon in the cyanogroup, is the most effective agent to accelerate the desired reaction by a decrease of water. CeO₂(110) planes are active for the hydrolysis of 2-cyanopyridine, further enhancing the DMC formation by in situ removal of water effectively. The DMC yield is improved drastically up to 378.5 mmol g cat^-1 from 12.8 mmol g cat^-1 with the in situ hydrolysis of 2-cyanopyridine over rod-CeO₂(110) catalyst.     

Comparative study between gas phase and liquid phase for the production of DMC from methanol and CO2

Direct synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide over Co1.5PW12O40 in liquid and in gas phase is investigated. The synthesized catalyst has been characterized by means of FTIR and XRD. Liquid phase experiment results showed that high pressures are favorable for the synthesis of DMC. However, DMC formation is limited by the reaction with co-produced water. DMC selectivity is more strongly dependent on the temperature than on the pressure of CO2. As for the reactions in gas phase, it has been found that both CH3OH conversion and DMC selectivity decreased with increasing temperature, owing to the decomposition of DMC at high temperatures. High temperatures and more amount of Co1.5PW12O40 catalyst favor the formation of dimethoxymethane (DMM) and methyl formate (MF).     

尿素醇解合成碳酸二甲酯过程中离子液体催化剂的含量分析

提出了尿素醇解合成碳酸二甲酯体系中1-甲基-3-丁基咪唑氯化锌离子液体催化剂的含量分析方法。采用紫外光谱法测定了离子液体催化剂的最大吸收波长,并建立了标准工作曲线,其线性相关系数为0.9986,方法的相对标准偏差RSD为2.5%,回收率为98.7%～102.4%。