Separation and migration behavior of structurally related phenothiazines in cyclodextrin-modified capillary zone electrophoresis

The influences of buffer pH and the concentration of beta-cyclodextrins (beta-CDs) on the separation and migration behavior of 13 structurally related phenothiazines in CD-modified capillary zone electrophoresis (CD-CZE) using a phosphate background electrolyte at low pH were investigated. We focused on the separation of these phenothiazines, including the enantiomers of chiral analytes, with the use of beta-CD and hydroxypropyl-beta-CD (HP-beta-CD) as electrolyte modifiers or chiral selectors at concentrations less than 8 mM. The results indicate that the interactions of phenothiazines with beta-CDs are very strong and that effective separations of 13 analytes can be achieved with addition of 0.3 mM beta-CD or 0.5 mM HP-beta-CD in a phosphate buffer at pH 3.0. Binding constants of phenothiazines to beta-CDs were evaluated for a better understanding of the interactions of phenothiazines with beta-CDs.     

Enantioseparation of binaphthol and its mono derivatives by cyclodextrin-modified capillary zone electrophoresis

Chiral binaphthols belong to the group of most effective ligands for asymmetrical catalysis. In this context, various binaphthols presenting original substituents have been synthesized. Their study through capillary electrophoresis is the object of this work. The literature dedicated to the separation of atropisomers by capillary electrophoresis, corresponding only to binaphthol, reveals that its enantioseparation is always delicate because of the influence of many factors and the resolutions obtained are weak. Therefore, for a structured optimization, we first successfully evaluated the acidity constants of different binaphthols by means of capillary electrophoresis. With these known physicochemical characteristics, we could successfully carry out enantiomeric separations of the different binaphthols at pH 11.5, practically in completely ionized form, in phosphate medium, and in the presence of cyclodextrin (CD), with analysis times lower than 8min. The nature of CDs (alpha-CD, beta-CD, gamma-CD, hydroxypropyl-alpha-cyclodextrin (HP-alpha-CD), HP-beta-CD, HP-gamma-CD and trimethyl-beta-CD (TM-beta-CD)) and other factors in relation to enantiomeric resolution (applied voltage, nature and concentration of the electrolyte, and concentration of cyclodextrin) were optimized. These studies allowed us to determine the optimal conditions of separation (concentration and nature of CD) for each of the studied binaphthols. It is necessary to mention that, for the 1,1'-binaphthyl-2,2'-diol (Binol) at pH 11.5, the S atropisomer always migrated first, regardless of the nature and concentration of the cyclodextrin used. Moreover, an inversion in elution order of the two atropisomers as a function of pH was observed with gamma-CD (pH range: 10-11.5). The R atropisomer migrated first at pH 10. At pH 10.8 the migration order of the two atropisomers of Binol was reversed as a function of gamma-CD concentration. Finally, the addition of chiral ionic liquids (R(-)-1-hydroxy-N,N,N-trimethylbutan-2-aminium bis(trifluoromethylsulfonyl)imide and S(+)-tetrabutylammonium camphorsulfonate) was conducted. In the case of S(+)-tetrabutylammonium camphorsulfonate, a weak antagonistic effect was observed with modeling the evolution of enantiomeric resolution by means of the experimental design, while in the case of R(-)-1-hydroxy-N,N,N-trimethylbutan-2-aminium bis(trifluoromethylsulfonyl)imide the effect was neutral.     

Enantioseparation of chiral thiobarbiturates using cyclodextrin-modified capillary electrophoresis

The racemates of several chiral thiobarbiturates were separated by using different cyclodextrins in capillary electrophoresis (CE). Six neutral and negatively charged cyclodextrins 1 (CDs) were employed as chiral separators whereof five led to successful separation of enantiomeric thiobarbiturate pairs. The CDs used were the native alpha-CD, beta-CD, gamma-CD, and heptakis-(2,6-di-O-methyl)-beta-cyclodextrin (HDM) as well as heptakis-(2,3-di-O-methyl-6-sulfato)-beta-cyclodextrin (HDMS) and heptakis-(2,3-di-O-acetyl-6-sulfato)-beta-CD (HDAS). Five of the six chiral thiobarbiturates studied could be resolved at a basic pH value of 9.4 and a phosphate buffer concentration of 100 mM in a fused-silica capillary. Structurally related substances showed a similar behavior in separation: 1 and 2 bearing the center of chirality in the side chain at C5 can be best separated using gamma-CD, the N-alkyl-substituted compounds 3 and 4 as well as the N/S-dialkyl-substituted compound 5 could be resolved with HDM. Using the neutral CDs, the migration times were relatively small (< 11 min). 3 and 4 could be also resolved by means of the negatively charged HDMS. In the latter case, the migration time is twice as long as with HDM.     

Enantioseparation of binaphthol and its monoderivatives by cyclodextrin-modified capillary zone electrophoresis: A mathematical approach

A simple model for the separation of atropisomers of binaphthol and its monoderivatives by means of cyclodextrin-modified capillary zone electrophoresis (CD-CZE) was used to describe the migration behavior of poly charged enantiomers in a chiral separation system. This mathematical approach allowed for the determination of the optimal cyclodextrin concentrations for the enantioseparation of binaphthols by taking into account the influence of the formed complex mobilities. Moreover, using this theoretical approach, the reversal of the enantiomers’ migration order as a function of cyclodextrin concentration was predicated. The apparent complexation constants between the cyclodextrins and the binaphthol and its monoderivatives could be calculated using a non-linear curve fitting method and three linear plotting methods (x-reciprocal, y-reciprocal and double reciprocal). Good agreements between the theoretical and experimental cyclodextrin concentrations were obtained.     

Enantioseparation of phenothiazines in cyclodextrin-modified micellar electrokinetic chromatography

In this study, enantioseparations of five phenothiazines in cyclodextrin (CD)-modified micellar electrokinetic chromatography (MEKC) were investigated using a citrate buffer containing tetradecyltrimethylammonium bromide (TTAB) as a cationic surfactant at low pH. Beta-cyclodextrin (beta-CD) and hydroxylpropyl-beta-CD (HP-beta-CD) were selected as chiral selectors. The results indicate that the separation window is greatly enlarged by beta-CD concentration and that the separability and selectivity of phenothiazines are remarkably influenced by the concentrations of both beta-CD and TTAB, as well as buffer pH. The interaction of thioridazine with beta-CDs is considerably reduced in the presence of TTAB micelles due to competitive complexation of thioridazine with TTAB micelles, which is pH-dependent. As a result, effective enantioseparation of thioridazine is simultaneously achievable with that of trimeprazine and promethazine or ethopropazine in MEKC with addition of either beta-CD or HP-beta-CD, respectively, to a micellar citrate buffer containing TTAB at pH 3.5. Better enantioresolution of thioridazine in MEKC than in capillary zone electrophoresis can be obtained.     

Enantioseparation of benzoins and enantiomer migration reversal of hydrobenzoin in capillary zone electrophoresis with dual cyclodextrin systems and borate complexation

Rapid, precise, accurate, and reproducible methodology using capillary electrophoresis (CE) with dynamically coated capillaries for the analysis of heroin and its basic impurities and adulterants is presented. Highly selective determination of the above solutes is obtained by analyzing the same sample preparation by two CE methods. For the determination of heroin, its basic impurities and basic adulterants, dynamic coating of the capillary surface is accomplished using a commercially available reagent kit with an added cyclodextrin ((CD) polycation coating followed by polyanion coating with dimethyl-beta-cyclodextrin or hydroxypropyl-beta-cyclodextrin). The addition of a cyclodextrin to the run buffer significantly improves the separation of these solutes. Neutral, acidic, and weakly basic adulterants which migrate near or after t0 do not interfere with the more mobile basic solutes. The determination of neutral, acidic, and weakly basic adulterants in heroin is accomplished using a modification of the above commercially available reagent kit. After first coating with a polycation, a negative coating is obtained using a surfactant sodium dodecyl sulfate. Micellar electrokinetic chromatography (MEKC) with dynamically coated capillaries gives an excellent separation of the neutral, acidic, and weakly basic solutes, with considerably shorter run times compared to conventional MEKC. In addition for this system, most basic solutes in heroin have longer migration times than the uncharged and acidic compounds.     

Enantiomeric analysis of rivastigmine in pharmaceuticals by cyclodextrin-modified capillary zone electrophoresis

Chiral separation method development is usually very time-consuming due to the diversity in chemical structures of pharmaceutical drug substances as well as the suitable separation conditions and the problem to choose the appropriate chiral selector. This paper shows capillary zone electrophoresis (CZE) which was developed for chiral separation of a basic compound - rivastigmine (RIV) using 30 cm × 50 μm i.d. polyacrylamide (PAA)-coated fused-silica capillary (effective length 20 cm), amine-modified phosphate buffer of pH 2.5 and sulfated-β-CD (S-β-CD) as chiral selector. Other selected native or derivatized cyclodextrins (CDs) were also tested: β-CD (5, 30 mM), carboxymethyl-β-CD (5, 30 mM), dimethyl-β-CD (15 mM), hydroxypropyl-β-CD (5, 30 mM), hydroxypropyl-α-CD (5, 30 mM) and hydroxypropyl-γ-CD (5, 30 mM). Complete enantiomeric separation of RIV was achieved at 20 kV, 18 °C and detection at 200 nm within 8 min with R.S.D. for the absolute migration time reproducibility of less than 2.1%. Rectilinear calibration range was 5.0-500.0 μM of each enantiomer (r = 0.9994-0.9995). The CZE method proposed was used for the control of chiral purity of pharmaceutically active S-RIV and for the analysis of Exelon caps preparation.     

Enantiomeric and isomeric separation of herbicides using cyclodextrin-modified capillary zone electrophoresis

Cyclodextrin-modified capillary zone electrophoresis (CD-CZE) was applied successfully to the enantiomeric and isomeric separation of three herbicides (imazaquin, diclofop and imazamethabenz). Commercially available cyclodextrins were evaluated for separation of the enantiomers and isomers of the three herbicides having varied molecular structures. The enantiomers of imazaquin and diclofop, and the isomers of imazamethabenz could be resolved with a resolution of ≥1.5. The resolution was found to depend on pH of the run buffer, cyclodextrin type and cyclodextrin concentration. By employing mixed cyclodextrins in the running buffer, the three herbicides were simultaneously separated in a single run. In addition, rapid (less than 3 min) enantiomeric separation is demonstrated using imazaquin as a model herbicide. The reported capillary electrophoresis (CE) methods are simple, rapid, efficient and reproducible and our results demonstrate that CE provides a powerful analytical tool for enantiomeric and isomeric separation of herbicides.     

Enantioseparation of warfarin and its metabolites by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method with direct ultraviolet (UV)-absorbance detection is presented for the simultaneous enantiomeric separation of warfarin and its main metabolites, including warfarin alcohols, 4'-, 6-, and 7-hydroxywarfarin, using highly sulfated beta-cyclodextrin (HS-beta-CD) as the chiral selector. This chiral separation method was optimized in terms of the electrophoretic parameters, which included the concentration of HS-beta-CD used, the type and composition of organic modifier added to the background electrolyte (BGE) buffer, and the BGE buffer pH. Chiral separation of warfarin and its major metabolites was achieved with high resolution, selectivity, efficiency, repeatability, and reproducibility. This optimized chiral analysis of warfarin along with its metabolites was completed within a satisfactory electrophoresis time of 20 min.     

Enantiomer migration order in chiral capillary electrophoresis

Enantiomer migration order (EMO) in chiral capillary electrophoresis (CE) represents a challenging issue, referred to in less than 20% of the articles on CE enantioseparations. This review article will (i) illustrate the actuality of the topic, (ii) discuss some technical problems related to EMO in CE enantioseparations, (iii) examine the principal differences between CE and other separation techniques from the viewpoint of enantiomer elution order, (iv) demonstrate the potential for a designed reversal of EMO in CE, and (v) emphasize the importance of studying EMO for better understanding of chiral CE as well as its more effective application. Along with CE, the results obtained by other instrumental techniques such as nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry (MS), X-ray crystallography, as well as molecular modeling calculations will be shortly discussed. Rather than referring to all published examples of the opposite migration order of enantiomers in CE, the emphasis will be on general aspects. Recently, the reversal of the EMO was described in detail in a book chapter (Chankvetadze, B., Capillary Electrophoresis in Chiral Analysis, Wiley & Sons, Chichester, UK 1997, Chapter 12) as well as in three review articles.     

Enantioseparation of linear and cyclic chiral bis(phenethyl)amines by means of cyclodextrin-modified capillary electrophoresis

For two years drugs introduced to the market have had- to be enantiomerically pure. Rapid and cheap methods of high reproducibility must, therefore, be available for evaluation of enantiomeric purity. Within the framework of a larger project dealing with chiral recognition of phenethylamines by means of native and derivatized cyclodextrins it was intended to find capillary electrophoresis methods suitable for separation of the enantiomers of chiral bis(phenethyl)amines and their corresponding cyclic analogues, within 10 min, using small amounts of a chiral selector, to save time and money. Heptakis(2,3-O-diacetyl-6-sulfato)beta-CD was found to be the most promising candidate most often fulfilling these requirements.     

Chiral separation of hydroxyflavanones in cyclodextrin-modified capillary zone electrophoresis using sulfated cyclodextrins as chiral selectors

Chiral separations of three hydroxyflavanone aglycones, including 2'-, 3'-, and 4'-hydroxyflavanone, in capillary zone electrophoresis (CZE) using randomly sulfate-substituted beta-cyclodextrin (S-beta-CD) or dual cyclodextrin (CD) systems consisting of S-beta-CD and a neutral CD at low pH were investigated. The results indicate that S-beta-CD is an excellent chiral selector for enantioseparation of 2'-hydroxyflavanone and is a good chiral selector for 3'-hydroxyflavanone. Depending on the concentration of S-beta-CD ranging from 2.0 to 0.75% (w/v), the enantioresolution values were 10.5-19.5 and 1.8-3.4 for 2'- and 3'-hydroxyflavanone, respectively. The enantiomers of 4'-hydroxyflavanone could be effectively separated with S-beta-CD at a concentration of 2.0% (w/v) within 20 min. The enantioselectivity and enantioresolution follow the order 2'-hydroxyflavanone>3'-hydroxyflavanone>4'-hydroxyflavanone. Alternatively, with the addition of sodium dodecyl sulfate (SDS) monomers at low concentrations in the electrophoretic system, enantioselectivity of these hydroxyflavanone aglycones could be enhanced with dual CD systems. In this case, SDS monomer acted as a complexing agent probably first with S-beta-CD and then subsequently with the analytes for increasing the effective electrophoretic mobility of the analytes towards the anode and as a selectivity controller for affecting the selectivity of hydroxyflavanones. Better enantioseparation between 2'-hydroxyflavanone and 3'-hydroxyflavanone could be achieved with a dual CD system consisting of S-beta-CD and gamma-CD than that with S-beta-CD and beta-CD. In addition, possible chiral recognition mechanisms of hydroxyflavanones are discussed.     

Enantioseparation of cetirizine by sulfated-beta-cyclodextrin-mediated capillary electrophoresis

A sulfated beta-cyclodextrin (sulfated beta-CD)-mediated capillary electrophoresis method is described for the enantioseparation of cetirizine using achiral cefazolin as an internal standard. The enantioseparation of the drug was performed in a borate buffer (5 mM, pH 8.7) with 1% sulfated beta-CD (w/v) as chiral selector at 10 kV. Several parameters affecting the separation were studied, including the pH and the concentration of borate buffer and chiral selector. Under optimized conditions, a baseline separation of two enantiomers was achieved in less than 7 min. Using cefazolin as an internal standard (IS), the linear range of the method for the determination of levocetirizine was over 1.0 to 50.0 microg/mL; the detection limit (signal-to-noise ratio = 3) of levocetirizine was 0.5 microg/mL. The method allowed the enantioseparation of cetirizine in bulk samples and enantiomeric purity evaluation of levocetirizine (R-enantiomer) in pharmaceutical tablets (Xyzal), and it was also found to be suitable for enantioseparation in human plasma.     

Enantioseparation of amino acid derivatives by capillary zone electrophoresis using vancomycin as chiral selector

The separation of racemic derivatized amino acids (N-acetyl) into their enantiomers was achieved using capillary zone electrophoresis employing vancomycin as a chiral selector. Due to the strong absorption properties of the chiral selector at the low wavelengths used, the partial-filling countercurrent method was adopted in order to improve method sensitivity. In the separation system studied, the chiral selector filled only a part of the capillary and, due to the appropriate selection of the pH, was moving in the opposite direction of the analytes keeping the detector free from absorbing compounds. The effect of several experimental parameters on the enantioresolution of analytes was studied, e.g., vancomycin concentration (0-5 mM), pH of the background electrolyte (pH 4-7), capillary temperature (15-35 degrees C), and the presence of an organic modifier in the run buffer (methanol or ethanol or n-propanol). N-Acetyl glutamic acid, serine, cystine, tyrosine, and proline were all baseline-resolved into their enantiomers and the enantioresolution factor (R(s)) was increased by raising the vancomycin concentration. pH 4 allowed the baseline resolution of the five studied analytes in the presence of 2.5 mM of chiral selector and an increase in pH caused a decrease of R(s).     

Investigation of unexpected migration behavior of adenosine in capillary zone electrophoresis

Summary The capillary zone electrophoresis of two common nucleosides, adenosine and inosine, was investigated. Both compounds were resolved in a 0.1 M sodium phosphate buffer, pH 7.5. Contrary to expectations, adenosine behaved at this pH— 5 pH units lower than the literature pK_a— as a negative ion, migrating behind mesityloxide (neutral marker) when working in normal polarity mode. To confirm the migration order, peaks were identified from absorption maxima, by high-speed scanning detector. The change in electrophoretic mobility with pH was investigated for the nucleosides, and 10 other background electrolytes were tried to match the separation capabilities of the sodium phosphate buffer. Most inorganic buffers showed comparable separation, while organic, Good-type buffers lacked selectivity.     

Enantiomeric analysis of methotrexate in pharmaceuticals by cyclodextrin-modified capillary electrophoresis

A capillary electrophoresis for the chiral separation of racemic methotrexate (rac-MTX) was developed and validated. The two enantiomers were separated by using fused-silica capillary and a running buffer containing phosphate and hydroxypropyl-β-cyclodextrin (HP-β-CD). Several parameters were studied, including concentration and pH of phosphate buffer, separation voltage, and type and concentration of CD. The quantitative ranges were 12.5-200.0 μM for each enantiomer. The intra- and inter-day relative standard deviations (R.S.D.) and relative errors (R.E.) (n=5) were all <5%. The detection limits were found to be about 4 μM (S/N=3, injection 5 s) at 280 nm. All recoveries were greater than 93%. This method was applied to the assay of l-MTX in pharmaceuticals.     

Optimization of separation and migration behavior of cephalosporins in capillary zone electrophoresis

The influences of buffer pH, buffer concentration and buffer electrolyte on the migration behavior and separation of 12 cephalosporin antibiotics in capillary zone electrophoresis using three different types of buffer electrolyte, including phosphate, citrate, and 2-(N-morpholino)ethanesulfonate (MES), were investigated. The results indicate that, although buffer pH is a crucial parameter, buffer concentration also plays an important role in the separation of cephalosporins, particularly when cefuroxime and cefazolin, cephalexin and cefaclor, or cefotaxime and cephapirin are present as analytes at the same time. The electrophoretic mobility of cephalosporins and electroosmotic mobility measured in citrate and MES buffers are remarkably different from those measured in phosphate buffer. With citrate buffer, optimum buffer concentration is confined to a small range (35-40 mM), whereas buffer concentrations up to 300 mM can be used with MES buffer. Complete separations of 12 cephalosporins could be satisfactorily achieved with these three buffers under various optimum conditions. However, the separability of 12 cephalosporins with citrate or MES buffer is better than that with phosphate buffer. As a consequence of a greater electrophoretic mobility of cephalosporins than the electroosmotic mobility with citrate buffer at pH below about 5, some cephalosporins are not detectable. The cloudiness of the peak identification and of the magnitudes of the electrophoretic mobility of cefotaxime and cefuroxime reported previously are clarified. In addition, the pKa values of cephradine, cephalexin, cefaclor, and cephapirin attributed to the deprotonation of either an amino group or a pyridinium group are reported, and the migration behavior of these cephalosporins in the pH range studied is quantitatively described.     

Separation of phenothiazines in aqueous and non-aqueous capillary electrophoresis

Summary Four phenothiazines, promethazine, dioxypromethazine, chlorpromazine, and trifluoperazine have been separated by capillary electrophoresis using N,N,-dimethylformamide (DMF) as separation medium with UV absorbance detection. High voltage and concentrated buffer were used with small current and low electroosmosis. Good resolution and high column efficiency were obtained. Separation selectivity in DMF was different from that in water because of the different solvation interactions. The influence of buffer composition on separation selectivities and electroosmosis were also studied.     

Stacking in capillary zone electrophoresis

Due to the short light path of the capillaries, the CE detection limit based on concentration, is far less than that of HPLC and not sufficient for many practical applications. Several methods, based on different electrophoretic maneuvers, can concentrate the sample (stack) easily on the capillary before the separation step of capillary zone electrophoresis (CZE). These methods incorporate different types of discontinuous buffers as the means for invoking different velocities to the same analyte molecules to produce a sharpening of the band (stacking). In CZE, these buffers can be often very simple such as sample dilution or adding to the sample a high concentration of a fast mobility ion. However, in other applications these buffers can be as complicated as those required for isotachophoresis. Stacking can often yield a concentration factor of 5-30-fold, which can improve greatly in CZE the detection limits bringing them very close to those of HPLC. Different methods of stacking, the importance of discontinuous buffers and the different mechanism for concentration on the capillary are reviewed here. As there is a need for more practical applications, there will be more methods devised for stacking in CZE.     

Enantiomeric separation of neutral hydrophobic dihydrofuroflavones by cyclodextrin-modified micellar capillary electrophoresis

The enantiomeric separations of several very hydrophobic dihydrofuroflavones were performed and optimized using cyclodextrin-modified micellar capillary electrophoresis. Overall, the greatest enantiomeric peak-to-peak separations for the greatest number of flavones were obtained with hydroxypropyl-gamma-cyclodextrin. The effects of cyclodextrin and sodium dodecyl sulfate concentration and pH were examined in order to optimize the separation conditions. The ratio of surfactant-to-cyclodextrin concentration affected the chiral discrimination of the system significantly, with increases in the derivatized cyclodextrin concentration generally enhancing resolution. Higher efficiencies were obtained with lower concentrations of surfactant and cyclodextrin, although enantioseparation optimization often required higher concentrations to be used. A highly acidic pH was necessary to effectively suppress the electroosmotic flow when operating in the reversed polarity mode. Experiments utilizing the normal polarity mode and higher pH produced no separations.