Templated synthesis of single-walled carbon nanotube and metal nanoparticle assemblies in solution

Carbon nanotube (CNT) and metal nanoparticle (NP) assemblies are conjugated nanosystems with potential applications in catalysis, sensing, and light harvesting. Due to poor solubility of CNTs, previously reported synthetic approaches are limited to large multi-walled CNTs, bundles of single-walled CNTs (SWNTs), or surface-bound CNTs. Here we report a solution-phase synthesis of SWNT-metal NP assemblies that is generally applicable to common metal elements. Key to the process is the poly(styrene-alt-maleic acid) surfactant which disperses SWNTs in aqueous solutions and acts as templates for the binding of metal ions and metal NPs.     

In situ synthesis and characterization of multiwalled carbon nanotube/Au nanoparticle composite materials

An effective and facile in situ reduction approach for the fabrication of carbon nanotube-supported Au nanoparticle (CNT/Au NP) composite nanomaterials is demonstrated in this article. Linear polyethyleneimine (PEI) is ingeniously used as both a functionalizing agent for the multiwalled carbon nanotubes (MWNTs) and a reducing agent for the formation of Au NPs. This method involves a simple mixing process followed by a mild heating process. This approach does not need the exhaustive surface oxidation process of CNTs. The coverage of Au NPs on CNTs is tunable by varying the experimental parameters, such as the initial molar ratio of PEI to HAuCl4, the relative concentration of PEI and HAuCl4 to MWNTs, and the temperature and duration of the heat treatment. More importantly, even the heterogeneous CNT/Au composite nanowires are obtainable through this method. TEM, XPS, and XRD are all used to characterize the CNT/Au composite materials. In addition, the optical and electrocatalytic properties are investigated.     

Polyelectrolyte-templated synthesis of bimetallic nanoparticles

Bimetallic nanoparticles (NPs) are known to exhibit enhanced optical and catalytic properties that can be optimized by tailoring NP composition, size, and morphology. Galvanic deposition of a second metal onto a primary metal NP template is a versatile method for fabricating bimetallic NPs using a scalable, solution-based synthesis. We demonstrate that the galvanic displacement reaction pathway can be controlled through appropriate surface modification of the NP template. To synthesize bimetallic Au-Ag NPs, we used colloidal Ag NPs modified by layer-by-layer (LBL) assembled polyelectrolyte layers to template the reduction of HAuCl(4). NPs terminated with positively and negatively charged polyelectrolytes yield highly contrasting morphologies and Au surface concentrations. We propose that these charged surface layers control galvanic charge transfer by controlling nucleation and diffusion at the deposition front. This surface-directed synthetic strategy can be advantageously used to tailor both overall NP morphology and Au surface concentrations.     

Multi‐instrument characterization of the surfaces and materials in microfabricated,carbon nanotube‐templated thin layer chromatography plates. An analogy to ‘The Blind Men and the Elephant’

We apply a suite of analytical tools to characterize materials created in the production of microfabricated thin layer chromatography plates. Techniques used include X‐ray photoelectron spectroscopy (XPS), valence band spectroscopy, time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in both positive and negative ion modes, Rutherford backscattering spectroscopy (RBS), and helium ion microscopy. Materials characterized include: the Si(100) substrate with native oxide: Si/SiO₂, alumina (35 nm) deposited as a diffusion barrier on the Si/SiO₂: Si/SiO₂/Al₂O₃, iron (6 nm) thermally evaporated on the Al₂O₃: Si/SiO₂/Al₂O₃/Fe, the iron film annealed in H₂ to make Fe catalyst nanoparticles: Si/SiO₂/Al₂O₃/Fe(NP), and carbon nanotubes (CNTs) grown from the Fe nanoparticles: Si/SiO₂/Al₂O₃/Fe(NP)/CNT. The Fe films and nanoparticles appear in an oxidized state. Some of the analyses of the CNTs/CNT forests appear to be unique: (i) the CNT forest appears to exhibit an interesting ‘channeling’ phenomenon by RBS, (ii) we observe an odd–even effect in the SIMS spectra of C_n^‐ species for n = 1 – 6, with the n ≥ 6 ions showing a steady decrease in intensity, and (iii) valence band characterization of CNTs using X‐radiation is reported. Initial analysis of the CNT forest by XPS shows that it is 100 at.% carbon. After one year, only ca. 0.25 at.% oxygen is observed. The information obtained from the combination of the different analytical tools provides a more complete understanding of our materials than a single technique, which is analogous to the story of ‘The Blind Men and the Elephant’. The raw XPS and ToF‐SIMS spectra from this study will be submitted to Surface Science Spectra for archiving. Copyright © 2013 John Wiley & Sons, Ltd.     

Prussian Blue/Multiwalled Carbon Nanotube Hybrids: Synthesis,Assembly and Electrochemical Behavior

Prussian blue/carbon nanotube (PB/CNT) hybrids with excellent dispersibility in aqueous solutions were synthesized by adding CNTs to an acidic solution of Fe³⁺, [Fe(CN)₆]^3? and KCl. Fourier transform infrared spectroscopy, UV‐vis absorption spectroscopy and scanning electron microscopy were employed to confirm the formation of PB/CNT hybrids. The PB nanoparticles formed on the CNT surfaces exhibit a narrow size distribution and an average size of 40 nm. The present results demonstrate that the selective reduction of Fe³⁺ to Fe²⁺ by CNTs is the key step for PB/CNT hybrid formation. The subsequent fabrication of the PB/CNT hybrid films was achieved by layer‐by‐layer technique. The thus‐prepared PB/CNT hybrid films exhibit electrocatalytic activity towards H₂O₂ reduction.     

Metal ion-enriched polyelectrolyte complexes and their utilization in multilayer assembly and catalytic nanocomposite films

The mixing of Ag ion-doped poly(ethyleneimine) (PEI) and poly(acrylic acid) (PAA) produced Ag ion-doped polyelectrolyte complex particles (PECs) in solution. Positively charged Ag ion-doped PECs (Ag ion PECs) with a spherical shape were deposited alternatively with PAA to form a multilayer assembly. The multilayered film containing Ag ion PECs was reduced to generate a composite nanostructure. Metal nanoparticle (NP)-enriched nanocomposite films were formed by an additional process of the postadsorption of precursors on PECs within the nanocomposite films, which resulted in the enhancement of the catalytic and electrical properties of the composite films. Because the films contain PECs that are responsive to changes in pH and most of the NPs are embedded in the PECs, interesting catalytic properties, which are unexpected in a particle-type catalyst, were observed upon pH changes. As a result of the reversible structural changes of the films and the immobilization of the NPs within the films, the film-type catalysts showed enhanced performance and stability during catalytic reactions under various pH conditions, compared to particle-type catalysts.     

Analytical sensing of hydrogen peroxide on Ag nanoparticles–multiwalled carbon nanotube-modified glassy carbon electrode

A sensor based on silver nanoparticles (NPs)/multiwalled carbon nanotube (CNT)-modified glassy carbon electrode (GCE) was prepared and employed for accurate and rapid determination of hydrogen peroxide (H₂O₂). In summary, by using a mechanochemical method, multiwalled CNTs dispersed in ethanol and used for modification of GCE. After that, by using a double-pulse technique, silver NPs are electrodeposited on surface of multiwalled CNTs/ GCE. Parameters that are affected by electrocatalytic reduction of H₂O₂ on the modified electrode, such as multiwalled CNT concentration and double-pulse parameters, were optimized using Minitab software. The optimal modified electrode was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and cyclic voltammetry. The proposed H₂O₂ sensor exhibited excellent characteristics for the sensing of H₂O₂, such as wide linear range from 0.1 to 10 mM, a low detection limit of 2 μM, high repeatability, and no interference by a number of substances.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

CdS nanoparticles modified to chalcogen sites: new supramolecular complexes, butterfly bridging, and related optical effects

All present approaches to surface modification of nanoparticles (NPs) with organic ligands exploit metal (cadmium) sites as anchor points. To obtain efficient interaction of NP surface with p-orbitals of organic chromophores, we utilize the chalcogen (sulfur) sites on the NP surface. These sites present several advantages stemming from a stronger interaction of their atomic orbitals with both modifier and NP core. The chalcogen modification of CdS was achieved by using a mixed ligand (2,2'-bipyridyl-N,N')(malonato-O,O')-copper(II) monohydrate complex. The weak monodentate ligands (water) are replaced by a copper-sulfur bond during the modification reaction. The structure of the product was investigated by optical spectroscopy, electron spin resonance, and nuclear magnetic resonance. The modified NP can be described as a few tens (<40) of (2,2'-bipyridyl-N,N')(malonato-O,O')-copper units attached to the CdS core. Steady-state and time-resolved luminescence measurements, molecular orbital calculations, and UPS data indicate that delocalized surface states enveloping the surface chalcogen atoms of NP, transition metal, and p-orbitals of the bipyridine ligand are present in the synthesized species. The delocalized states are made possible due to the bridging of p-levels of sulfur and pi-orbitals of bipyridine by butterfly d-orbitals of the transition metal atom placed between them. Chalcogen-modified NP can be considered as a new member of the family of supramolecular compounds based on transition metal complexes. Both NP and metal complex parts of the prepared supramolecules are very versatile structural units, and new molecular constructs of similar design, in which quantum effects of NPs are combined with optical properties of transition metal complexes, can be obtained with different NPs and metal complexes.     

An Antibacterial Nonenzymatic Glucose Sensor Composed of Carbon Nanotubes Decorated with Silver Nanoparticles

A glucose sensor composed of silver nanoparticles decorated carbon nanotubes (Ag‐NPs/CNTs) prepared by ion implantation is described. Ag‐NPs with size of 2–4 nm are uniformly distributed in the CNTs after ion implantation. This process provides a strong combination between Ag‐NPs and CNTs and can effectively prevent the Ag‐NPs from aggregation. A linear range of 125 µM to 10 mM towards glucose determination was obtained. The Ag‐NPs/CNTs electrode shows minimal interferences from co‐existence species such as uric acid and ascorbic acid and an antibacterial rate of 94 % towards E. coli.     

溶液法制备的碳纳米管薄膜的结构分析与场致电子发射机理研究

结合紫外光电子能谱和拉曼光谱对溶液法制备的碳纳米管薄膜的场致电子发射性能进行研究。采用溶液滴涂法制备的碳纳米管薄膜的场致电子发射开启电场约为3.33 MV/m,阈值电场约为5.44 MV/m,以福勒-诺得海姆(Fowler-Nordheim,FN)理论对电子发射进行解释,其发射的增强因子接近103。通过对紫外光电子能谱的分析,发现碳纳米管薄膜的低能量截止端在外加电场作用下逐步降低,表明纳米管薄膜的表面有效势垒在外加电场作用下逐步下降,从而使得碳纳米管薄膜的电子更加容易发射进入真空。结合拉曼光谱和电学特性的研究,发现界面过渡层的接触电阻与碳纳米管薄膜中的非晶碳成分均可以增强场致电子发射。     

Electrochemical solid-state phase transformations of silver nanoparticles

Adenosine triphosphate (ATP)-capped silver nanoparticles (ATP-Ag NPs) were synthesized by reduction of AgNO(3) with borohydride in water with ATP as a capping ligand. The NPs obtained were characterized using transmission electron microscopy (TEM), UV-vis absorption spectroscopy, X-ray diffraction, and energy-dispersive X-ray analysis. A typical preparation produced ATP-Ag NPs with diameters of 4.5 ± 1.1 nm containing ~2800 Ag atoms and capped with 250 ATP capping ligands. The negatively charged ATP caps allow NP incorporation into layer-by-layer (LbL) films with poly(diallyldimethylammonium) chloride at thiol-modified Au electrode surfaces. Cyclic voltammetry in a single-layer LbL film of NPs showed a chemically reversible oxidation of Ag NPs to silver halide NPs in aqueous halide solutions and to Ag(2)O NPs in aqueous hydroxide solutions. TEM confirmed that this takes place via a redox-driven solid-state phase transformation. The charge for these nontopotactic phase transformations corresponded to a one-electron redox process per Ag atom in the NP, indicating complete oxidation and reduction of all Ag atoms in each NP during the electrochemical phase transformation.     

Quantum dot on a rope

The conjugation of nanoparticles (NPs) typically yields supramolecular materials which are fairly rigid, and the electronic coupling between the NP and other structural units of these compounds is fixed by covalent bonds. Here, we report on a novel bichromophor system constructed from a quantum dot tethered to a semiconducting polymer, which demonstrates the possibility of the dynamic interunit coupling in the NP supramolecules. The NP bichromophoric system was made on the basis of the layer-by-layer assembled (LBL) films of an anionic polyelectrolyte with poly(p-phenylene ethynylene) backbone, aPPE, and poly(allylamine hydrochloride) PAH polycation. To conjugate CdTe NPs to the (aPPE/PAH)(m) LBL film, we took advantage of the reactive groups of NP stabilizer, that is, -COOH, and the aminogroups on PAH. Tethering of CdTe was accomplished by using poly(ethyleneglycole), PEG, chains with two reactive terminals such as t-BOC-NH-PEG-COO-NHS. The evidence for successful conjugation of NPs to the LBL films can be seen both in AFM images and in optical data. The latter also indicate that the light quanta emitted by the NPs originate from the light absorption of the polymer film, which proves the presence of the aPPE-->NP energy-transfer process. The average separation distance between the NPs tethered to the LBL films can be changed by altering the dielectric properties of the solvent affecting PEG tether coiling (water/alcohol mixture). The reduced emission intensity of aPPE was found to follow the extension of the PEG tether. The quenching of aPPE is reversible when the original composition of the solvent mixture is restored. Thus, CdTe-PEG-aPPE is an example of an organized NP system with tunable optical coupling. Variable electronic coupling offers a convenient structural platform for new nanotechnological devices for which spatial control translates into a higher level of sophistication. PEG molecules afford a wide variety of polymer chain configurations with different reactive terminals, which makes possible the preparation of diverse NP superstructures.     

A strategy for the high dispersion of PtRu nanoparticles onto carbon nanotubes and their electrocatalytic oxidation of methanol

Carbon nanotubes (CNTs) were non-covalently functionalized by 1-pyrenecarboxaldehyde (PCA) via π-π stacking interactions. PCA not only acts as the reductant for the deposition of PtRu nanoparticles, but the oxidation product of PCA can also effectively anchor and stabilize the in-situ-produced PtRu?NPs on the surface of CNTs. Transmission electron microscopy demonstrates that PtRu?NPs are uniformly dispersed on the surface of CNTs with small particles sizes of about 1.7 nm. The obtained PtRu-NP/CNT composites have higher electrochemical surface areas, electrocatalytic activities, and better stability towards methanol oxidation compared to PtRu?NPs supported on pristine CNTs.     

Co-N4大环配合物分子应用于异相电催化CO2还原

利用可再生能源产生的电能催化二氧化碳还原(CO₂RR)是可持续制备碳基化学品的一种潜在途径.电催化剂是实现这个转化的关键,目前还需要深入地研究机理去优化催化剂的设计.M-N₄结构的大环配合物是一类结构明确、性能易调控的分子电催化剂,是研究结构-性能关系的理想平台.其中,金属酞菁在异相电催化CO₂RR中展现出较好的催化性能,受到广泛关注.而其它M-N₄结构大环配合物(如金属卟啉、金属咔咯)在异相电催化CO₂RR中报道较少,且催化性能一般.本文对比研究了酞菁钴(CoPc)、四苯基卟啉钴(CoTPP)和三苯基咔咯钴(CoTPC)三种分子异相电催化CO₂RR的性能,揭示制约金属卟啉和金属咔咯分子应用于异相体系的原因,并提出改进方法.首先采用碳纳米管(CNT)复合的方法对三种分子进行了研究.结果表明,只有CoPc能够与CNT形成性能优异的复合电催化剂,而CoTPP和CoTPC复合电催化剂几乎不具备活性.这是因为这两种分子具有扭曲的苯环导致分子与CNT作用力弱,在复合物里面只有很少的分子锚定在CNT上.本文采用直接滴涂法制备三种分子与CNT物理混合电极,并研究了分子载量对催化性能的影响.结果表明,在1.08×10^-8molcm^-2低分子载量时,CoTPP+CNT和Co TPC+CNT样品基本无活性,它们的电催化活性随着分子载量的提升而显著增加.在5.4×10^-7molcm^-2的高载量时,CoTPC+CNT和CoTPP+CNT样品在-0.67 V(相对可逆氢电极,下同)的电位下分别展现出14.0和7.61 mA cm^-2的CO分电流密度,是1.08×10^-8 molcm^-2载量样品的8.7和7.9倍.这说明对于Co TPP和CoTPC分子,可以通过加大载量来增加与CNT作用几率,从而提高电极活性.然而,基于CoPc制备的样品活性随着CoPc分子载量的增加变化不明显.这是由于在低载量下CoPc分子已经很好地与CNT相互作用,并且CNT上CoPc分子负载量是有限的,继续增大载量只会导致聚集.本文进一步发展一种聚乙烯吡啶(PVP)桥连的办法,提升CoTPP和CoTPC在低载量下的电极活性.聚乙烯链能够通过疏水作用缠绕在CNT上,同时吡啶能够与分子金属中心配位,从而为分子与CNT结合建立桥梁.当分子载量为1.08×10^-8mol cm^-2时,CoTPP+CNT/PVP在-0.67 V电位下展现出85%以上的CO法拉第效率,而且CO分电流密度达到7.84 mA cm^-2,是没有添加PVP对比样CoTPP+CNT的8倍.由此可见,分子与基底的相互作用强度对异相电催化CO₂RR的性能有重要影响.对于与基底相互作用弱的大环配合物分子可以通过大分子载量的滴涂法或引入桥连分子来提高电极性能.这些方法可以拓展到其它分子体系,有助于构建高效的异相分子电催化剂.     

Controllable preparation and properties of composite materials based on ceria nanoparticles and carbon nanotubes

We report a method to prepare composites based on carbon nanotubes (CNTs) and CeO₂ nanoparticles (NPs). The CeO₂ NPs were attached to CNTs by hydrothermal treatment of Ce(OH)₄/CNT mixture in NaOH solution at 180 °C. It was found that larger CeO₂ NPs were formed in the presence of CNTs. Grain size of CeO₂ NPs in the composites can be reduced when NaNO₃ was added in the hydrothermal process. Electrochemical characterizations have shown that the composites possess a specific capacity between those of CNTs and CNTs mechanically mixed with CeO₂. These CeO₂/CNT composites could serve as promising anode materials for Li-ion batteries.     

Effect of thiocyanate counterion condensation on poly(allylamine hydrochloride) chains on the buildup and permeability of polystyrenesulfonate/polyallylamine polyelectrolyte multilayers

In this study, we investigate the buildup of PEI-(PSS-PAH)(n) polyelectrolyte multilayers at pH 7.4 in the presence of either NaCl or NaSCN as a supporting electrolyte. It appears that in the presence of increasing thiocyanate concentrations (from 0.1 to 0.5 M), the thickness increment, obtained from optical waveguide lightmode spectroscopy experiments, increases whereas it stays practically constant for increasing sodium chloride concentrations (between 0.1 and 0.5 M). The hydration of the films differs also markedly between both electrolyte solutions. The differences in the construction of the polyelectrolyte multilayers in the presence of both supporting electrolytes are rationalized in terms of strong SCN(-) condensation on the PAH chains. The occurrence of this ion condensation is indirectly demonstrated by means of zeta potential measurements and directly demonstrated by means of attenuated total internal reflection infrared spectroscopy on the multilayer films. Moreover when the films are built up in the presence of SCN(-), these ions are only slowly exchanged by the Cl(-) ions introduced in the bulk. Conversely the thick films obtained from 0.5 M NaSCN solutions do not deswell when the buffer solution is replaced by a 0.5 M NaCl containing buffer. The permeability of the films constructed in the presence of both sodium salts is also studied by means of cyclic voltametry and is found to be markedly different in the case of films made from five bilayers at 0.5 M salt concentration. This difference is due to the different morphology and porosity of the films constructed in the presence of 0.5 M NaCl and 0.5 M NaSCN.     

Effects of CNT‐film Pretreatment on the Characteristics of NiCo2O4/CNT Core‐shell Hybrids as Electrode Material for Electrochemistry Capacitor

NiCo₂O₄/CNT nanocomposite films were fabricated by in‐situ growing ultrafine NiCo₂O₄ nanoparticles on acid‐modified carbon nanotube (CNT) films. The effects of CNT‐film pretreatment were investigated thoroughly by various characterization outfits including Fourier Transform Infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, RTS‐9 four‐point probes resistivity measurement system, X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and CHI660D electrochemical workstation. These results suggested that carbon nanotubes were uniformly wrapped by NiCo₂O₄ nanoparticles forming a hierarchical core‐shell structure. And the crystallinity, conductivity of the CNTs and detail structure (both morphology and size) of the NiCo₂O₄ nanoparticles varied with prolonged acid treatment time which resulted in increased functional groups and defects on CNT films and further affected the electrochemical properties. The composite film composed of the CNT film pretreated by mixed acid for 12 h exhibited excellent electrochemical properties: 828 F/g at 1 A/g and 656 F/g at 20 A/g, and maintained over 99 % of its capacitance after 3000 cycles of charge/discharge at 5 A/g. Acid treatment for either too long or too short is detrimental to the electrochemical properties of the composite films. Such work should be of fundamental importance for tailoring electrochemical properties by elaborate design of acid treatment on CNTs.     

铬酸及硝酸混合液处理以增强碳纳米管场发射

为了修饰碳纳米管(CNTs)的表面型态及改变碳纳米管的表面结构, 进一步增强碳纳米管的场发射特性, 使用铬酸及硝酸的混合溶液对碳纳米管进行后处理. 采用SEM、TEM、Raman 和EDS测试手段对样品的形貌、表面成份组成和微观结构特征进行了表征. 场发射(FE)的数据显示, 经过铬酸及硝酸的混合溶液处理20 min的碳纳米管场发射电流比未经任何处理的碳纳米管场发射电流明显增加一个数量级以上, 场发射电流增强的主要原因为样品上的碳纳米管的表面型态的改变, 造成碳纳米管场发射增强因子茁的增大. 与单独使用硝酸溶液后处理比较, 使用铬酸及硝酸的混合溶液对碳纳米管进行后处理可以得到较高的场发射电流及较低的起始电场. 铬酸及硝酸的混合溶液处理方法能经济且有效增强碳纳米管的场发射特性.