Effect of Carrier Differences on Spin Polarized Injection into Organic and Inorganic Semiconductors

Spin polarized injection into organic and inorganic semiconductors are studied theoretically from the spin diffusion theory and Ohm＇s law, and the emphases are placed on the effect of the carrier differences on the current spin polarization. The mobility and the spin-flip time of carriers in organic and inorganic semiconductors are different. From the calculation, it is found that current spin polarization at a ferromagnetic/organic interface is higher than that at a ferromagnetic/inorganic interface because of different carriers in them. Effects of the conductivity matching, the spin dependent interracial resistances, and the bulk spin polarization of the ferromagnetic layer on the spin polarized injection are also discussed.     

极化子比率变化对自旋注入有机半导体性质的影响

从自旋扩散方程和欧姆定律出发研究了铁磁层到有机半导体的自旋注入,得到了系统的电流自旋极化率。有机半导体中的载流子为自旋极化子和不带自旋的双极化子,极化子比率在有机半导体内随输运距离变化。通过计算发现匹配的铁磁和有机半导体电导率有利于自旋注入;通过调节界面电阻自旋相关性,电流自旋极化率可获得很大程度提高;极化子比率衰减速率对有机半导体电流自旋极化率具有非常重要的影响。     

铁磁/有机半导体/铁磁系统的电流自旋极化性质研究

根据有机半导体中的电流自旋极化注入和输运实验现象，理论上研究了铁磁/有机半导体/铁磁系统的电流自旋极化性质.考虑到有机半导体的具体特性，从自旋扩散理论和欧姆定律出发，得到了系统的电流自旋极化率.假设自旋极化子和不带自旋的双极化子为有机半导体中的载流子.通过计算发现，极化子为实现有机半导体中电流极化注入和输运的有效自旋载流子，即使它只占总载流子很少一部分.还进一步研究了自旋相关界面电阻和电导率匹配以及有机半导体长度等因素对系统电流自旋极化的影响. 关键词： 自旋电子学 自旋注入 有机半导体 极化子     

Effect of Electric Field on Spin Polarized Current in Ferromagnetic/Organic Semiconductor Systems

Considering the special carriers in organic semiconductors, the spin polarized current under electric field in a ferromagnetic/organic semiconductor system is theoretically studied. Based on the spin-diffusion theory, the current spin polarization under the electric field is obtained. It is found that electric field can enhance the current spin polarization.     

A vertical transport geometry for electrical spin injection and extraction in Si

Schottky barriers formed between ferromagnetic metal and Semiconductor are of particular interest for spin injection and detection experiments. Here, we investigate electrical spin polarized carrier injection and extraction in Si using a Co/Si/Ni vertical structure built on a 250 nm thick Si membrane. Current–voltage measurements performed on the devices at low temperatures showed evidence of the conduction being dominated by thermionic field emission, which is believed to be the key to spin injection using Schottky junctions. This, however, proved inconclusive as our devices did not show any magnetoresistance signal even at low temperatures. We attribute this partially to the high resistance-area product in our Schottky contacts at spin injection biases. We show the potential of this vertical spin-device for future experiments by numerical simulation. The results reveal that by growing a thin highly doped Ge layer at the Schottky junctions the resistance-area products could be tuned to obtain high magnetoresistance.     

The effects of electric and magnetic fields on the current spin polarization and magnetoresistance in a ferromagnetic/organic semiconductor/ferromagnetic（FM/OSC/FM） system

From experimental results of spin polarized injection and transport in organic semiconductors(OSCs),we theoretically study the current spin polarization and magnetoresistance under an electric and a magnetic field in a ferromagnetic/organic semiconductor/ferromagnetic(FM/OSC/FM) sandwich structure according to the spin drift-diffusion theory and Ohm’s law.From the calculations,it is found that the interfacial current spin polarization is enhanced by several orders of magnitude through tuning the magnetic and electric fields by taking into account the specific characteristics of OSC.Furthermore,the effects of the electric and magnetic fields on the magnetoresistance are also discussed in the sandwich structure.     

Organic magnetoresistance and spin diffusion in organic semiconductor thin film devices

We review recent work in the field of organic spintronics, focusing on our own contributions to this field. There are two principle magnetoresistance effects that occur in organic devices. (i) Organic magnetoresistance (OMAR), which occurs in nonmagnetic organic semiconductor devices. For example, in devices made from the prototypical small molecule Alq₃ OMAR reaches values of 10% or more at room temperature. (ii) Organic spin‐valve effects that occur in devices that employ ferromagnetic electrodes for spin‐polarized current injection and detection. We undertake an analysis of these two types of magnetoresistance with the goal of identifying the dominant spin‐scattering mechanism. Analysis of OMAR reveals that hyperfine coupling is the dominant spin‐coupling mechanism. Spin–orbit coupling, on the other hand, is important only in organic semiconductor materials containing heavy atoms. We explore the reasons why spin–orbit coupling is relatively unimportant in hydrocarbon materials. Next, we present a theory for spin diffusion in disordered organic semiconductors based on hyperfine coupling, taking into account a combination of incoherent carrier hopping and coherent spin precession in the random hyperfine magnetic fields. We compare our findings with experimental values for the spin‐diffusion length. Finally, we demonstrate a criterion that allows the determination whether the organic spin‐valves operate in the tunneling or injection regimes. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of different conductivity between the spin polarons on spin injection in a ferromagnet/organic semiconductor system

Spin injection across ferromagnet/organic semiconductor system with finite width of the layers was studied theoretically considering spin-dependent conductivity in the organic-semiconductor. It was found that the spin injection efficiency is directly dependent on the difference between the conductivity of the up-spin and down-spin polarons in the spin-injected organic system. Furthermore, the finite width of the structure, interfacial electrochemical-potential and conductivity mismatch have great influence on the spin injection process across ferromagnet/organic semiconductor interface.     

Accuracy of circular polarization as a measure of spin polarization in quantum dot qubits

A quantum dot spin light emitting diode provides a test of carrier spin injection into a qubit and a means for analyzing carrier spin injection and local spin polarization. Even with 100% spin-polarized carriers the emitted light may be only partially circularly polarized due to the geometry of the dot. We have calculated carrier polarization-dependent optical matrix elements for InAs/GaAs self-assembled quantum dots (SAQDs) for electron and hole spin injection into a range of quantum dot sizes and shapes, and for arbitrary emission directions. Calculations for typical SAQD geometries with emission along [110] show light that is only 5% circularly polarized for spin states that are 100% polarized along [110]. Measuring along the growth direction gives near unity conversion of spin to photon polarization and is the least sensitive to uncertainties in SAQD geometry.     

Micro-photoluminescence study of electron-spin injection in self-assembled semiconductor quantum dots

We present a micro-photoluminescence (m-PL) study of electron-spin injection under magnetic fields in self-assembled semiconductor quantum dots (QDs) of CdSe. A characteristic band line-up of the CdSe QDs coupled with a diluted magnetic semiconductor quantum well (DMS-QW) of ZnCdMnSe through a ZnSe barrier layer enabled us to inject the electron spins from the DMS-QW into QDs. An experimental evidence of the electron-spin injection was provided by observations of circularly polarized m-PL spectra from individual QDs in this coupled QD structure. We find anti-correlation of PL intensity in between the DMS-QW (spin injector) and the individual QDs (spin receiver).     

Locking bandwidth and birefringence effects for polarized optical injection in vertical-cavity surface-emitting lasers

The aim of this paper is to investigate the effects of external optical injection taking account of polarization and electron spin properties in vertical-cavity surface-emitting lasers (VCSELs). Using external polarized injection we seek the locked phases and amplitudes of specific polarized fields in terms of injection level and frequency detuning, taking account of two kinds of distinguishable carrier density (spin-up and spin-down). For the conventional form of optical injection without taking account of spin-polarized fields there are three fundamental equations describing the carrier density, field amplitude and phase. However, by using the spin flip model (SFM), the combined effect of polarized fields along two perpendicular crystal axes and electron spin properties results in six equations. We analyse the conditions for stable locking and also the influence of birefringence effects on the stability map of detuning versus optical injection for both cases of injection polarized parallel and perpendicular to the lasing mode of the solitary VCSEL. For given values of pumping and spin relaxation rate there is a minimum birefringence rate for orthogonal injection. Above this value three regions of elliptical polarization are found in the stability map, namely “quasi-stability” (QS), “coupled limit cycle” (CLC) and “coupled chaos” (CC). The three regions of linear polarization, namely chaos, limit cycle and stability, are reduced in area compared to the case of parallel injection. For orthogonal injection it is found that increased birefringence or reduced spin relaxation rate causes the stable locking region to begin at higher injected power and frequency detuning.     

Design considerations for semiconductor spin lasers

The threshold of semiconductor lasers is drastically reduced by injection of spin polarized electrons if the laser meets specific design rules. Taking into account the challenges of spin injection, spin transport, and spin relaxation, we discuss the threshold reduction in surface- and edge-emitting spin lasers at room temperature.     

Measurement of electron spin lifetime and optical orientation efficiency in germanium using electrical detection of radio frequency modulated spin polarization

We propose and demonstrate a technique for electrical detection of polarized spins in semiconductors in zero applied magnetic fields. Spin polarization is generated by optical injection using circularly polarized light which is modulated rapidly using an electro-optic cell. The modulated spin polarization generates a weak time-varying magnetic field which is detected by a sensitive radio-frequency coil. Using a calibrated pickup coil and amplification electronics, clear signals were obtained for bulk GaAs and Ge samples from which an optical spin orientation efficiency of 4.8% could be determined for Ge at 1342 nm excitation wavelength. In the presence of a small external magnetic field, the signal decayed according to the Hanle effect, from which a spin lifetime of 4.6±1.0 ns for electrons in bulk Ge at 127 K was extracted.     

有机自旋器件磁性渗透层中双极化子对自旋极化输运的影响

根据实验发现的有机器件如Co/有机半导体/La_0.7Sr_0.3MnO₃中磁性原子渗透现象, 利用自旋漂移-扩散方程, 理论研究了磁性渗透层中极化子-双极化子的转化对自旋极化输运的影响. 研究发现: 磁性渗透层具有不同于纯净有机层的迁移率和自旋反转时间, 都将影响极化子-双极化子的转化, 进而影响自旋极化的输运; 在磁性渗透层中极化子自旋反转时间的劈裂是引起自旋弛豫的主要因素, 而极化子和双极化子之间的转化是重要因素.     

Spontaneous spin polarization in rubrene studied by density functional theory calculations

We theoretically studied the spontaneous spin polarization properties of organic molecule rubrene by using density functional theory calculations. Our investigations show that normally nonmagnetic molecule rubrene could be spin polarized by spinless-hole injection. Magnetic moment of the molecule increases linearly with the extra hole charge amount only when the injected hole charges reach a certain value. The spin density resides predominantly on the carbon atoms in the tetracene backbone of rubrene molecule and also the bond lengths change differently due to the injected charge. Spontaneous spin polarization can be explained as the preferably filling of the spin-splitted carbon p_z orbitals near the Fermi energy for the injected charge.     

Design of a mirror aberration corrector and a beam separator for LEEM

A SPLEEM (spin polarized low energy electron microscope) has been designed with a numerical simulation of electrostatic and magnetic field distributions and electron ray trajectories. Highly (more than 90%) spin polarized electron source has been used. A Wien type spin manipulator and a magnetic lens type spin rotator are used to align spin direction. A magnetic field free objective lens is designed to observe magnetic domain structure of magnetic materials. High or low magnification mode can be selected by using a combined electrostatic and magnetic objective lens for a high spatial resolution and a wide imaging area observation. An electrostatic mirror aberration corrector is installed after the image forming objective lens. A double deflection 45° beam separator is used to bend the direction of electrons from the source to the objective lens and from the objective lens to the mirror aberration corrector.     

自旋极化有机电致发光器件中单线态与三线态激子的形成及调控

由于有机半导体（OSC）材料自旋弛豫时间长、自旋扩散长度大,OSC自旋器件逐渐成为研究热点.对于有机电致发光器件（OLED）,通过自旋极化电极调控单线态和三线态激子比率是提高其效率的有效方法.本文从漂移扩散方程和载流子浓度连续性方程出发,结合朗之万定律建立了一个自旋注入、输运、复合的理论模型.计算了OSC中的极化电子、空穴浓度,得出了单线态和三线态激子的比率.分析了电场强度、自旋相关界面电导、电极和OSC电导率匹配和电极极化率等因素的影响.计算结果表明：两电极注入反向极化的载流子并提高载流子自旋极化率,有     

Spin Coulomb Dragging Inhibition of Spin-Polarized Electric Current Injecting into Organic Semiconductors

We introduce a one-dimensional spin injection structure comprising a ferromagnetic metal and a nondegenerate organic semiconductor to model electric current polarizations. With this model we analyse spin Coulomb dragging (SCD) effects on the polarization under various electric fields, interface and conductivity conditions. The results show that the SCD inhibits the current polarization. Thus the SCD inhibition should be well considered for accurate evaluation of current polarization in the design of organic spin devices.     

Dynamics of polarization buildup by spin filtering

There has been much recent research into polarizing an antiproton beam, instigated by the recent proposal from the PAX (Polarized Antiproton eXperiment) project at GSI Darmstadt. It plans to polarize an antiproton beam by repeated interaction with a polarized internal target in a storage ring. The method of polarization by spin filtering requires many of the beam particles to remain within the ring after scattering off the polarized internal target via electromagnetic and hadronic interactions. We present and solve sets of differential equations which describe the buildup of polarization by spin filtering in many different scenarios of interest to projects planning to produce high-intensity polarized beams. These scenarios are: 1) spin filtering of a fully stored beam; 2) spin filtering while the beam is being accumulated, i.e. unpolarized particles are continuously being fed into the beam; 3) the particle input rate is equal to the rate at which particles are being lost due to scattering beyond the ring acceptance angle, the beam intensity remaining constant; 4) increasing the initial polarization of a stored beam by spin filtering; 5) the input of particles into the beam is stopped after a certain amount of time, but spin filtering continues. The rate of depolarization of a stored polarized beam on passing through an electron cooler is also shown to be negligible.     

自旋注入有机物的扩散理论

根据自旋注入半导体的相关理论， 考虑到有机体内可能同时含有带自旋的单极化子和不带自旋的双极化子两种载流子，从扩散 理论和欧姆定律出发，建立了自旋注入有机体的唯象模型.通过计算发现，适当选择铁磁层极化率或两层的电导率可以使得有机层内电流具有高的自旋极化.进一步研究了单极化子浓度等因素对注入电流极化的影响. 关键词： 自旋电子学 自旋注入 有机聚合物 极化子