PREPARATION OF POLYSULFONAMIDE/TiO2 NANOCOMPOSITES BY SOL-GEL

Polysulfonamide (PSA) was synthesized at room temperature, the polymerization based on terephthaloyl chloride and 3,3 '-diaminodiphenylsulfone in the common solvent N,N -Dimethyl-acetamide (DMAc). Polysulfonamide/titanium oxide nanocomposites were prepared by sol-gel method. Tetrabutyl titanate(TBT) was added into the polysulfonamide solution, at the same time ,some water was mixed to make the TBT hydrolyze. In the process, hydrochloric acid was used to catalyze the reaction. The polysulfonamide chemistry structure was characterized by FT-IR spectrum. Atomic force microscopy (AFM) was employed to observe the microstructure of the composite film. The thermal property was investigated by TGA.The results show that we have succeeded to synthesize the polysulfonamide, TiO2particles were well distributed in the composite film and average size was about 20 nm on average, the heat-resistance of nanocomposite was batter than the pure polysulfonamide.     

A NEW KIND OF FIBER-SPUN FROM POLYSULFONAMIDE/ZINC SOLUTION

In this paper, we succeed in fabricating high-temperature fiber of polysulfonamide/ZnO. Polysulfonamide/ZnO nanocomposite was prepared by in-situ polymerization. Some studies and characterization of Polysulfonamide/ Zinc oxide nanocomposite with ZnO 0.5% have been done. It includes ηr,, Crystal degree and thermal property. Experiment＇s results showed that, ZnO as filler can improve crystal degree of polysulfonamide fiber. The crystal degree has been bnproved, from lower than 20% up to 27%. ηr of polysulfonamide/ Zinc oxide nanocomposite solution with ZnO 0.5% is 2.03. The maxinum weight loss of the nanocomposite occurred at 453.5 ℃.     

一种新型的铕络合物/TiO2发光薄膜

研究了Eu(DBM)3(DiBut-bpy)/TiO2/AA 单分子膜的表面压－分子面积(π－A)曲线和稳定性,单层膜中的TiO2纳米粒子是经TBT（tetrabutyloxyltitanium ,钛酸四丁酯）二维溶胶-凝胶法得到的.TiO2纳米粒子和铕络合物都被成功地转移到固体基片上，得到了具有良好的机械和热稳定性的新型发光薄膜.小角度X射线衍射结果证明这种复合膜具有层状有序的周期性结构.讨论了TiO2基质对复合膜发光机理的影响.     

利用Breath Figures法制备具有蜂窝状结构的 PMMA/TBT复合膜

以聚甲基丙烯酸甲酯(PMMA)和钛酸四丁酯(TBT)的氯仿溶液为铸膜溶液,采用Breath Figures法制备了蜂窝状结构的PMMA/TBT多孔阵列薄膜,采用SEM、JR、XRD对制备的多孔膜进行了表征,探讨了聚合物浓度、PMMA/TBT配比以及水解抑制剂对膜蜂窝状结构的影响.实验结果表明,起始溶液浓度为20～30m...     

反应介质pH值和前驱体用量对PSt/TiO_2复合微球结构形态及TiO_2空心微球形貌的影响

首先用聚乙烯亚胺(PEI)对粒径为360 nm的单分散无皂聚苯乙烯(PSt)乳胶粒进行修饰,得到表面荷正电的PSt种子乳液,然后将其滴加到溶有钛酸正丁酯(TBT)的乙醇与水的混合介质中,通过溶胶-凝胶(sol-gel)法制备出了核壳结构PSt/TiO2复合微球,系统研究了体系pH和TBT用量对复合微球结构形态的影响.研究表明,酸性条件不利于核壳结构PSt/TiO2复合微球的形成;当体系pH值为7.2时,可得到包覆完整、TiO2壳层厚度均一的PSt/TiO2复合微球,此后随着体系pH值的升高,包覆厚度逐渐提高;当pH值升高到11.0时,壳层厚度达到最大,但出现了包覆层不完整的复合微球.在固定聚合体系pH为8.5,EtOH/H2O质量比为100/6,表面修饰PSt种子乳液用量为0.5 g(固含量为4%)的条件下,随着TBT用量从0.01 g增加到0.16 g,复合微球壳层厚度从约0 nm逐渐增加到60 nm;当TBT用量增加到0.32 g时,壳层厚度迅速降至12nm,微球表面变得粗糙,并出现大量未包覆微粒;此后随着TBT用量的增加,包覆层厚度逐渐减少,未包覆微球逐渐增多.结果显示,当复合微球中TiO2包覆层达到一定厚度时,经煅烧后才能得到形貌完整的TiO2中空微球.     

PREPARATION OF POLYSULFONAMIDE AND MODIFIED TITANIUM OXIDE NANOCOMPOSITES BY IN-SITU POLYMERIZATION

1. INTRODUCTIONAlthough Polysulfonamide fibers have showed excellent high temperature resistance with Tg over 370℃ , their poor mechanical strength and easy broken character after the exposure of UV radiation, have limited their applications [1～3]. Titanium oxide nanoparticles were widely used as UV absorptive additives in textile materials and cosmetic industries because of its’ efficiency and harmless characters [4～6]. In our work, we used a kind of titanium oxide nanoparticles, w…     

PREPARATION OF POLYSULFONAMIDE AND MODIFIED TITANIUM OXIDE NANOCOMPOSITES BY IN-SITU POLYMERIZATION

A kind of new nano composite with ultraviolet (UV) ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide (PSA) was synthesized with 4, 4'-diaminodiphenyl sulfone (DDS) and terephthaloyl chloride (TPC) in the common solvent N, N-Dimethyl- -acetamide (DMAc). Nano filler is a certain nano titanium oxide modified by silicon oxide (TMS), which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy (AFM), thermal gravimetric Analysis (TGA) and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.     

Multivariate optimization approach for the analysis of butyltin compounds in mussel tissues by gas chromatography-mass spectrometry

The derivatization with NaBEt(4) for the determination of butyltin compounds in mussel tissues (Mytilus galloprovincialis) by GC-MS was optimized using a central composite design. The effects of NaBEt(4) concentration, pH and acetate buffer concentration on the derivatization efficiency were considered. Solid-phase extraction with Florisil cartridges was performed, demonstrating that the clean-up drastically reduces the background and improves the sensitivity. The good accuracy of the method was verified on a certified reference material (ERM 477); the figures of merit for all the three analytes, evaluated under optimum conditions, were satisfactory. The optimized derivatization procedure was applied to the determination of the analytes in mussels exposed to tributyltin (TBT). All considered tissues showed considerable accumulation of TBT, especially gills.     

Ag-PVA和Ag-PVA/TiO2复合超薄膜的制备及性能研究

用3种方法制备了银纳米粒子-聚乙烯醇复合体系,其中用加热还原法所得体系中Ag纳米粒子的尺寸较大(15nm),其表面等离子体共振吸收峰较宽,最大吸收波长位于420nm;用室温硼氢化钠还原法得到的复合体系的吸收峰蓝移至409nm,且峰形较窄,Ag纳米粒子的平均粒径为8.7nm;低温NaBH4还原法所得体系吸收峰进一步蓝移至397nm,此时Ag纳米粒子粒径最小(3.5nm).将室温还原法所得Ag-PVA复合体系旋涂成膜,所得薄膜光滑、透明、均匀性好,该法适用于制备多层薄膜,以调控薄膜的厚度和光谱性质.将Ag-PVA复合体系与钛酸四丁酯(Ti(O_nBu)₄)的乙醇溶液交替旋涂得到Ag-PVA/TiO₂有机/无机复合薄膜.紫外-可见吸收光谱研究表明,随着Ag-PVA层数的增加,薄膜的表面等离子体共振吸收强度呈线性增加,但是TiO₂层数的增加对吸收光谱没有明显影响.Ag-PVA/TiO₂有机/无机复合薄膜将金属纳米粒子、有机高分子与无机半导体材料结合在一起,这种多层纳米结构在光电、催化功能薄膜等方面具有潜在的应用前景.     

不同催化剂作用下聚乳酸/聚碳酸亚丙酯的酯交换反应

选用辛酸亚锡[Sn(Oct)₂]和钛酸四丁酯(TBT)作为聚乳酸(PLA)/聚碳酸亚丙酯(PPC)的酯交换反应催化剂, 研究了溶液条件下单一催化剂及复合催化剂对PLA/PPC酯交换反应的催化作用. 通过对反应产物的分子结构、 热力学及流变学行为进行分析, 结果发现, 无论在单一催化剂还是复合催化剂作用下, PLA与PPC分子间均发生了酯交换反应, 同时伴随着断链反应. 其中, 当Sn(Oct)₂作为单一催化剂或Sn(Oct)₂/TBT作为复合催化剂时, 样品更倾向发生断链反应而非显著的酯交换反应. 进一步分析纯样品在催化剂Sn(Oct)₂或TBT作用下的反应情况, 结果发现, PPC在反应最初阶段以高分子量的分子链断链为主, 且会发生明显的解拉链降解, 从而导致PLA/PPC在等质量比时酯交换反应程度不高, 这为今后更好地研究PLA/PPC酯交换反应提供了思路.     

Synthesis,characterization, photophysical and oxygen-sensing properties of a copper(I) complex

In this paper, we report the synthesis, crystal structure, photophysical properties, and electronic nature of a phosphorescent Cu(I) complex of [Cu(TBT)(POP)]BF₄, where TBT and POP stand for 4,5,9,14-tetraaza-benzo[b]triphenylene and bis(2-(diphenylphosphanyl)phenyl) ether, respectively. [Cu(TBT)(POP)]BF₄ renders a red phosphorescence peaking at 622 nm, with a long excited-state lifetime of 13.2 μs. Density functional calculation reveals that the emission comes from a triplet metal-to-ligand-charge-transfer excited state. We electrospun composite nanofibers of [Cu(TBT)(POP)]BF₄ and polystyrene, hoping to explore the possibility of replacing precious-metal-based oxygen sensors with cheap Cu-based ones. The finally obtained samples with average diameter of ~700 nm exhibit a maximum sensitivity of 5.8 toward molecular oxygen with short response/recovery time (5/13 s) due to the large surface-area-to-volume ratio of nanofibrous membranes. No photobleaching is detected in these samples. All these results suggest that phosphorescent Cu(I) complexes doped nanofibrous membranes are promising candidates for low-cost and quick-response oxygen-sensing materials.     

High photocatalytic degradation activity of polyethylene containing polyacrylamide grafted TiO2

A novel photocatalytic polyacrylamide grafted TiO₂ (PAM-g-TiO₂) nanocomposite was prepared and embedded into a low density polyethylene (LDPE) plastic. Photocatalytic degradation of the LDPE/PAM-g-TiO₂ composite film was carried out under ambient conditions under ultraviolet light irradiation. The properties of composite film were compared with those of the pure LDPE film by measuring the changes in weight loss, carbonyl index, molecular weight, tensile strength and elongation at break. PAM-g-TiO₂ embedded LDPE showed highly enhanced photocatalytic degradation. Irradiating the LDPE/PAM-g-TiO₂ composite film for 520 h under UV light reduced its weight by 39.85% and average molecular weight (M_w) by 94.60%, while that of pure LDPE film was only 1.03% and 69.59%, respectively. The addition of PAM-g-TiO₂ brought about the good dispersion of TiO₂ in LDPE matrix and improved the hydrophilicity of composite film, which were able to facilitate the degradation of LDPE. The photocatalytic degradation mechanism of the films is briefly discussed.     

Application of a Thiadiazole-derivative in a Tyrosinase-based Amperometric Biosensor for Epinephrine Detection

Enzyme-based amperometric biosensors are proving to be important analytical tools in several fields such as food, environmental and, in recent years, the biomedical one. This work describes the use of 4,7-bis(5-(pyridin-2-yl)thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT) in the development of a tyrosinase-based biosensor for epinephrine detection. The modifying agent was obtained as a film by electrochemical oxidation of TBT on a gold disk electrode. Electrochemical characterization and scanning electrode microscopy (SEM) images suggest the formation of a conducting film on the electrode surface. Tyrosinase from mushroom was then immobilized by a mixed technique of adsorption and cross-linking. Glutaraldehyde was used as a coupling agent. The obtained device shows a very good linear response (0.1–50 μM) with a LoD value of 0.06 μM and a LoQ of 0.09 μM. Moreover, good selectivity towards some typical interferents (namely, ascorbic acid, tryptophan, uric acid and L-cysteine) and satisfactory recoveries have been observed.     

Storage stability studies for tributyltin determination in human urine samples using headspace solid‐phase microextraction and gas chromatography mass spectrometry

A headspace solid‐phase micro‐extraction (HS‐SPME) method was employed in order to study the effect of storage conditions of human urine samples spiked with tributyltin (TBT) using gas chromatography and mass spectrometry. To render the analyte more volatile, the derivatization (ethylation) was made in situ by sodium tetraethylborate (NaBEt₄), which was added directly to dilute unpreserved urine samples and in buffers of similar acidity. The stability of TBT in human urine matrix was compared with the stability of TBT in buffer solutions of similar pH value. Critical parameters of storage conditions such as temperature and time, which affect the stability of TBT in this kind of matrix, were examined extensively. The tests showed that the stability of TBT remains practically satisfactory for a maximum of 2 days of storage either at +4 or 20°C. Greater variations were observed in the concentration of TBT in human urine samples at +4°C and lower ones at ?20°C over a month's storage. The freeze–thaw cycles have negative effect on the stability and should be kept to a minimum. The results from spiked urine samples are also discussed in comparison to those acquired from buffer solutions of equal TBT concentration. Copyright © 2012 John Wiley & Sons, Ltd.     

二氧化硅纳米粒子薄膜的制备及光学性能

以二氧化硅胶体和聚二烯丙基二甲基氯化铵(PDDA)为原料,利用静电自组装技术制备了PDDA/SiO2复合薄膜. TEM图象显示,薄膜中的SiO2纳米粒子为密堆积,薄膜均匀、致密;电子衍射实验结果显示,所组装的薄膜为非晶态膜.载玻片表面组装SiO2纳米粒子薄膜后,透射率随薄膜双层数增加呈现周期变化.薄膜具有增透作用,载玻片双面组装薄膜后在一定波长范围内的透射率可提高5％以上. PDDA/SiO2复合薄膜的光学性质主要由SiO2纳米粒子决定,每一双层的平均物理厚度小于SiO2纳米粒子的粒径,薄膜中存在层间穿插现象,逐层组装的复合薄膜具有单层光学薄膜的特性.     

CdS纳米晶@碳点复合物膜的电致化学发光

采用热解柠檬酸法制备碳点(CDs),并将之与表面无包裹剂的CdS纳米晶(CdS NCs)超声复合制备CdS纳米晶@碳点(CdS NCs@CDs)复合物。研究了复合物膜阴极电致化学发光(ECL),探讨了CDs对CdS纳米晶膜ECL增强的机理。CDs分散性良好、尺寸在1.5~4 nm之间;与粒径约为4 nm的CdS纳米晶按体积比2∶3复合后,在360 nm光激发下复合物具有最强的荧光发射且表现为CDs的荧光。同时,复合物膜产生归属于激发态CdS纳米晶的最强的ECL发射,且ECL发光峰起置电势正移至-1.05 V。复合物膜的ECL发射是pH依赖的,在pH值为6时,复合物膜具有最大的ECL强度,为CdS纳米晶膜ECL强度的19倍。这种ECL增强源于CDs能束缚大量电子产生局域电场从而促进近邻CdS纳米晶激发态的形成与弛豫。     

Novel preparation of electrically conducting poly (vinyl chloride) by photo-dehydrochlorination from poly (vinyl chloride)/polypyrrole composite film

Polypyrrole (PPy) was deposited electrochemically on a platinum plate from a nitric acid solution of pyrrole. The PVC/PPy composite film was finally obtained by casting poly(vinyl chloride) (PVC) onto the PPy electrode from a tetrahydrofuran solution of PVC. The prepared composite film was irradiated at 90°C with a low-pressure mercury lamp in the stream of hydrogen gas saturated with steam, and the PVC film was dehydrochlorinated, leading to the formation of conjugated polyene. The electrical conductivity (σ) of the PVC film in the irradiated composite film was reveled: σ=2.51 × 10^?5S cm^?1. By iodine doping, σ was further enhanced up to 5.04 X 10^?3 S cm^?1. The tensile strength of the irradiated composite film became larger than that of the original PVC film; i.e., the stress at break was: 461 (composite film); 401 kg cm^?2 (PVC). These results were brought about by the doping of radical species to the conjugated polyene. The anion, NO^?₃, doped during the electrodeposition of PPy was photodecomposed to generate radical NO₂ and this species was doped to the polyene, resulting in the formation of electrically conductive PVC and mechanically improved composite film. © 1994 John Wiley & Sons, Inc.     

纳米纤维素/聚3,4-乙撑二氧噻吩复合薄膜的制备及电致变色性能

以棉浆粕为原料,采用硫酸溶胀结合超声波处理的方法制备了纳米纤维素(NC).在纳米纤维素的水分散液中加入3,4-乙撑二氧噻吩单体,以过硫酸铵为氧化剂,采用原位化学氧化法制得了纳米纤维素/聚3,4-乙撑二氧噻吩(NC/PEDOT)纳米复合物.对NC和NC/PEDOT复合物进行扫描电镜、透射电镜和红外光谱分析.将纳米复合物的水分散液滴涂在氧化铟锡(ITO)玻璃表面形成复合薄膜,考察不同纳米纤维素含量对NC/PEDOT复合薄膜电致变色性能的影响.结果表明,NC呈棒状,平均直径为20 nm,长度为100~300nm;NC/PEDOT复合物中PEDOT均匀包覆在NC表面形成核壳结构,平均直径为30 nm;复合薄膜中当NC含量为60%时,其电致变色性能最好,具有最高的对比度(24.4%),最短的响应时间(1 s),最高的着色效率(51.8 cm~2/C).     

Butyltins biomagnification from macroalgae to green sea urchin: a field assessment

Biomagnification of butyltins (BTs) was examined in a simple food web including seawater, macroalgae (Alaria esculenta, Laminaria longicruris, Ulvaria obscura) and green urchin (Strongylocentrotus droebachiensis). The study was conducted in shallow waters of the St Lawrence Estuary (Canada) adjacent to two areas potentially contaminated by BTs. Levels of tri‐ (TBT), di‐ (DBT) and mono‐BT (MBT) were determined in seawater, green urchin (including faecal matter after sampling) and macroalgae surrounding the urchins at each sampling site. The concentrations of TBT in seawater from all stations were relatively low (3–7 ngSn l^?1), and both the TBT and the total BTs (∑BT = MBT + DBT + TBT) concentrations decreased with increase in distance from the BT sources. The concentrations of TBT in algae were 0.35 ngSn g^?1 dry weight (DW) in A. esculenta, 0.40 ngSn g^?1 DW in L. longicruris and 3.58 ngSn g^?1 DW in U. obscura. Following their location, green urchins feeding mainly on these algae accumulated BTs at levels ranging from 4 to 85 ngSn g^?1 DW in gonads and from 35 to 334 ngSn g^?1 DW in gut. The mean bioconcentration factor (BCF) calculated from seawater to algae ranged from 17 in A. esculenta to 151 in U. obscura, whereas the biomagnification factor (BMF) from algae to urchins ranged from 2 to 17 in gonads and from 10 to 67 in gut. The overall bioaccumulation factor of TBT between seawater and internal organs of urchins reached an average value of 1.2 × 10³. These results are the first to illustrate high BT BCFs and BMFs in human‐edible macroalgae and urchins sampled from northern coastal areas with a low TBT contamination level. Copyright © 2003 John Wiley & Sons, Ltd.     

气相色谱-质谱法测定纺织助剂中的有机锡

建立了纺织助剂中二丁基锡(dibutyltin, DBT)、三丁基锡(tributyltin, TBT)及三苯基锡(triphenyltin, TPhT)化合物的气相色谱-质谱联用(gas chromatography-mass spectrometry, GC-MS)检测方法。在乙酸-乙酸钠缓冲溶液(pH 4.0)中,用正己烷超声萃取(对疏水性样品)或振荡萃取(对亲水性样品)试样中的有机锡,然后以四乙基硼化钠的四氢呋喃溶液为衍生化试剂进行衍生化,用GC-MS测定,依据保留时间和选择离子定性,外标法定量。实验结果表明,在0.1～8.0 mg/L(对于DBT和TBT)或0.1～4.0 mg/L(对于TPhT)的范围内,有机锡化合物的浓度（以有机锡阳离子计）与其衍生物峰面积呈良好的线性关系,线性相关系数(r2)为0.9994～0.9998,检出限为0.003～0.005 mg/L; 4种聚氨酯类助剂基质中3种有机锡化合物的平均加标回收率为92.6%～108.0%,相对标准偏差为2.5%～10.2%。该方法的技术指标满足纺织助剂中有机锡化合物的测定要求。