Synthesis and characterization of a new four-layer Aurivillius phase Bi2SrNa2Nb4O15 and its protonated form

A new four-layer Aurivillius phase Bi₂SrNa₂Nb₄O₁₅ has been synthesized by solid-state reaction of Bi₂SrNb₂O₉ and NaNbO₃ at 1100 °C. The detailed structure determination of Bi₂SrNa₂Nb₄O₁₅ performed by powder X-ray diffraction (XRD) shows that it crystallizes in the space group I4/mmm [a∼3.9021(1) Å, c∼40.7554(10) Å]. Protonated form of Bi₂SrNa₂Nb₄O₁₅ was obtained by the substitution of bismuth oxide sheets with protons via acid treatment. The conversion into the protonated forms was achieved easily using 6 M HCl at room temperature. Preservation of the structure of the perovskite-like slabs and contraction in the c-axis were confirmed by X-ray analysis. The compositions of the resulting products were determined to be H_1.8[Sr_0.8Bi_0.2Na₂Nb₄O₁₃] by X-ray fluorescence spectroscopy (XFS) and thermogravimetry.     

Phase formation, crystal chemistry, and properties in the system Bi2O3-Fe2O3-Nb2O5

Subsolidus phase relations have been determined for the Bi₂O₃-Fe₂O₃-Nb₂O₅ system in air (900-1075 °C). Three new ternary phases were observed—Bi₃Fe_0.5Nb_1.5O₉ with an Aurivillius-type structure, and two phases with approximate stoichiometries Bi₁₇Fe₂Nb₃₁O₁₀₆ and Bi₁₇Fe₃Nb₃₀O₁₀₅ that appear to be structurally related to Bi₈Nb₁₈O₅₇. The fourth ternary phase found in this system is pyrochlore (A₂B₂O₆O′), which forms an extensive solid solution region at Bi-deficient stoichiometries (relative to Bi₂FeNbO₇) suggesting that ≈4-15% of the A-sites are occupied by Fe³⁺. X-ray powder diffraction data confirmed that all Bi-Fe-Nb-O pyrochlores form with positional displacements, as found for analogous pyrochlores with Zn, Mn, or Co instead of Fe. A structural refinement of the pyrochlore 0.4400:0.2700:0.2900 Bi₂O₃:Fe₂O₃:Nb₂O₅ using neutron powder diffraction data is reported with the A cations displaced (0.43 Å) to 96g sites and O′ displaced (0.29 Å) to 32e sites (Bi_1.721Fe_0.190(Fe_0.866Nb_1.134)O₇, Fd3¯m (#227), ). This displacive model is somewhat different from that reported for Bi_1.5Zn_0.92Nb_1.5O_6.92, which exhibits twice the concentration of small B-type cations on the A-sites as the Fe system. Bi-Fe-Nb-O pyrochlores exhibited overall paramagnetic behavior with large negative Curie-Weiss temperature intercepts, slight superparamagnetic effects, and depressed observed moments compared to high-spin, spin-only values. The single-phase pyrochlore with composition Bi_1.657Fe_1.092Nb_1.150O₇ exhibited low-temperature dielectric relaxation similar to that observed for Bi_1.5Zn_0.92Nb_1.5O_6.92; at 1 MHz and 200 K the relative permittivity was 125, and above 350 K conductive effects were observed.     

Preparation and crystal structure of [Bi3I(C4H8O3H2)2(C4H8O3H)5]2Bi8I30 containing the novel polynuclear [Bi8I30] anion

Preparation and crystal structure of the novel compound [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ are reported. The title compound is prepared by heating of BiI₃ and diethylene glycol at 413 K in a sealed quartz glass tube filled with argon. Deep red single crystals are grown and applied to perform X-ray powder diffraction and X-ray single-crystal diffraction measurements. The compound crystallizes triclinic with space group P-1: Z=2, a=13.217(1) Å, b=15.277(1) Å, c=22.498(1) Å, α=84.33(1), β=73.18(1), γ=67.48(1). [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ comprises the novel polynuclear [Bi₈I₃₀]⁶⁻ anion and [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]³⁺ as the cation. Cation as well as the anion can be assumed to represent intermediates between solid BiI₃ and BiI₃ completely dissolved in diethylene glycol.     

A new 2212-type stair like structure: Bi14Sr21Fe12O61, m=5 member of the generic [Bi2Sr3Fe2O9]m[Bi4Sr6Fe2O16] family

A new oxide, Bi₁₄Sr₂₁Fe₁₂O_61, with a layered structure derived from the 2212 modulated type structure Bi₂Sr₃Fe₂O₉, was isolated. It crystallizes in the I2 space group, with the following parameters: a=16.58(3) Å, b=5.496(1) Å, c=35.27(2) Å and β=90.62°. The single crystal X-ray structure determination, coupled with electron microscopy, shows that this ferrite is the m=5 member of the [Bi₂Sr₃Fe₂O₉]_m[Bi₄Sr₆Fe₂O₁₆] collapsed family. This new collapsed structure can be described as slices of 2212 structure of five bismuth polyhedra thick along , shifted with respect to each other and interconnected by means of [Bi₄Sr₆Fe₂O₁₆] slices. The latter are the place of numerous defects like iron or strontium for bismuth substitution; they can be correlated to intergrowth defects with other members of the family.     

Crystal structure, stoichiometry, and dielectric relaxation in Bi3.32Nb7.09O22.7 and structurally related ternary phases

The crystal structure of the phase previously reported to occur at 4:9 Bi₂O₃:Nb₂O₅ has been determined using single-crystal X-ray and powder neutron diffraction (P6₃/mmc; a=7.4363(1) Å, c=19.7587(5) Å; Z=2). The structural study combined with phase equilibrium analyses indicate that the actual composition is Bi_3.32Nb_7.09O_22.7. This binary compound is the end-member of a family of four phases which form along a line between it and the pyrochlore phase field in the Bi₂O₃:Fe₂O₃:Nb₂O₅ system. The structures are derived from the parent pyrochlore end-member by chemical twinning, and can also be described as unit-cell intergrowths of the pyrochlore and hexagonal tungsten bronze (HTB) structures. The dielectric properties of the three chemically twinned pyrochlore phases, Bi_3.32Nb_7.09O_22.7, Bi_9.3Fe_1.1Nb_16.9O_57.8 and Bi_5.67FeNb₁₀O₃₅, were characterized. All exhibit low-temperature, broad dielectric relaxation similar to that of the Bi-Fe-Nb-O pyrochlore. At 1 MHz and ≈175 K the observed relative permittivites were 345, 240, and 205, respectively, compared to 125 for the Bi-Fe-Nb-O pyrochlore. The higher relative permittivities observed for the chemically twinned pyrochlore derivatives are ascribed to the presence of HTB blocks in their structures: The Bi atoms located in the HTB blocks feature highly asymmetric coordination environments compared to pyrochlore, and the magnitude of the relative permittivity increases with the proportion of Bi located within the HTB portions of the structures.     

Synthesis and characterization of rare-earth doped SrBi2Nb2O9 phase in lithium borate based nanocrystallized glasses

Glass composites comprising of un-doped and samarium-doped SrBi₂Nb₂O₉ nanocrystallites are fabricated in the glass system 16.66SrO-16.66[(1−x)Bi₂O₃-xSm₂O₃]-16.66Nb₂O₅-50Li₂B₄O₇ (0?x?0.5, in mol%) via the melt quenching technique. The glassy nature of the as-quenched samples is established by differential thermal analyses. Transmission electron microscopic studies reveal the presence of about 15 nm sized spherical crystallites of the fluorite-like SrBi_1.9Sm_0.1Nb₂O₉ phase in the samples heat treated at 530 °C. The formation of layered perovskite-type un-doped and samarium-doped SrBi₂Nb₂O₉ nanocrystallites with an orthorhombic structure through the intermediate fluorite phase is confirmed by X-ray powder diffraction and micro-Raman spectroscopic studies. The influence of samarium doping on the lattice parameters, lattice distortions, and the Raman peak positions of SrBi₂Nb₂O₉ perovskite phase is clarified. The dielectric constants of the perovskite SrBi₂Nb₂O₉ and SrBi_1.9Sm_0.1Nb₂O₉ nanocrystals are relatively larger than those of the corresponding fluorite-like phase and the precursor glass.     

Structural and magnetic characterisation of Aurivillius material Bi2Sr2Nb2.5Fe0.5O12

The n=3 Aurivillius material Bi₂Sr₂Nb_2.5Fe_0.5O₁₂ is investigated and combined structural refinements using neutron powder diffraction (NPD) and X-ray powder diffraction data (XRPD) data reveal that the material adopts a disordered, tetragonal (I4/mmm) structure at temperatures down to 2 K. Significant ordering of Fe³⁺ and Nb⁵⁺ over the two B sites is observed and possible driving forces for this ordering are discussed. Some disorder of Sr²⁺ and Bi³⁺ over the M and A sites is found and is consistent with relieving strain due to size mismatch. Highly anisotropic thermal parameters for some oxygen sites suggest that the local structure may be slightly distorted with some rotation of the octahedra. Magnetic measurements show that the material behaves as a Curie-Weiss paramagnet in the temperature range studied with no evidence of any long-range magnetic interactions. Solid solutions including Bi_3−xSr_xNb₂FeO₁₂, Bi₂Sr_2−xLa_xNb₂FeO₁₂ and Bi₂Sr₂Nb_3−xFe_xO₁₂ were investigated but single-phase materials were only successfully synthesised for a narrow composition range in the Bi₂Sr₂Nb_3−xFe_xO₁₂ system.     

Intercalation behavior of n-alkylamines into an A-site defective layered perovskite H2W2O7

Intercalation behavior of n-alkylamines into a protonated form of an A-site defective layered perovskite H₂W₂O₇ has been investigated. Results from XRD indicate these materials are layered with the corresponding interlayer spacing governed by the n-alkylamine chain length, and a reversible intercalation and deintercalation property is observed among these intercalation compounds. The IR spectra of the intercalation compounds with n-alkylamines clearly show that n-alkyl chains possess an all-trans conformation, and H₂W₂O₇ accommodate n-alkylamines (C_nH_2n+1NH₂: n=3, 4, 7, 8, 12, 16) to form intercalation compounds via an acid-base mechanism. A linear relationship between the interlayer distance and the number of carbon atoms in n-alkyl chains is observed to show a bilayer arrangement of the n-alkyl chains with a tilt angle of ∼71.6°. Elemental analysis studies reveal that the amounts of intercalated n-alkylamines are about 2.0 mol per [W₂O₇]. Despite the surface geometry of H₂W₂O₇ is almost identical to those of layered perovskites H₂[A_n−1B_nO_3n+1], the amounts of intercalated n-alkylamines of them are different. A reasonable explanation is given through our research.     

Crystal structure, magnetic, and dielectric properties of Aurivillius-type Bi3Fe0.5Nb1.5O9

Bi₃Fe_0.5Nb_1.5O₉ was synthesized using conventional solid state techniques and its crystal structure was refined by the Rietveld method using neutron powder diffraction data. The oxide adopts an Aurivillius-type structure with non-centrosymmetric space group symmetry A2₁am (a=5.47016(9) Å, b=5.43492(9) Å, c=25.4232(4) Å), analogous to other Aurivillius compounds that exhibit ferroelectricity. The Fe and Nb cations are disordered on the same crystallographic site. The [(Fe,Nb)O₆] octahedra exhibit tilting and distortion to accommodate the bonding requirements of the Bi cations located in the perovskite double layers. Magnetic measurements indicate non-Curie-Weiss-type paramagnetic behavior from 300 to 6 K. Measurements of dielectric properties and electrical resistivity exhibited changes near 250-260 °C and are suggestive of a ferroelectric transition.     

Subsolidus phase equilibria and properties in the system Bi2O3:Mn2O3±x:Nb2O5

Subsolidus phase relations have been determined for the Bi-Mn-Nb-O system in air (750-900 °C). Phases containing Mn²⁺, Mn³⁺, and Mn⁴⁺ were all observed. Ternary compound formation was limited to pyrochlore (A₂B₂O₆O′), which formed a substantial solid solution region at Bi-deficient stoichiometries (relative to Bi₂(Mn,Nb)₂O₇) suggesting that ≈14-30% of the A-sites are occupied by Mn (likely Mn²⁺). X-ray powder diffraction data confirmed that all Bi-Mn-Nb-O pyrochlores form with structural displacements, as found for the analogous pyrochlores with Mn replaced by Zn, Fe, or Co. A structural refinement of the pyrochlore 0.4000:0.3000:0.3000 Bi₂O₃:Mn₂O_3±x:Nb₂O₅ using neutron powder diffraction data is reported with the A and O′ atoms displaced (0.36 and 0.33 Å, respectively) from ideal positions to 96g sites, and with Mn²⁺ on A-sites and Mn³⁺ on B-sites (Bi_1.6Mn²⁺_0.4(Mn³⁺_0.8Nb_1.2)O₇, (?227), a=10.478(1) Å); evidence of A or O′ vacancies was not found. The displacive disorder is crystallographically analogous to that reported for Bi_1.5Zn_0.92Nb_1.5O_6.92, which has a similar concentration of small B-type ions on the A-sites. EELS spectra for this pyrochlore were consistent with an Mn oxidation between 2+ and 3+. Bi-Mn-Nb-O pyrochlores exhibited overall paramagnetic behavior with negative Curie-Weiss temperature intercepts, slight superparamagnetic effects, and depressed observed moments compared to high-spin, spin-only values. At 300 K and 1 MHz the relative dielectric permittivity of Bi_1.600Mn_1.200Nb_1.200O₇ was ≈128 with tan δ=0.05; however, at lower frequencies the sample was conductive which is consistent with the presence of mixed-valent Mn. Low-temperature dielectric relaxation such as that observed for Bi_1.5Zn_0.92Nb_1.5O_6.92 and other bismuth-based pyrochlores was not observed. Bi-Mn-Nb-O pyrochlores were readily obtained as single crystals and also as textured thin films using pulsed laser deposition.     

Crystal chemistry and crystallography of the Aurivillius phase Bi5AgNb4O18

Bi₅AgNb₄O₁₈ is a new phase, which was discovered during the phase equilibrium study of the Bi₂O₃-Ag₂O-Nb₂O₅ system. Bi₅AgNb₄O₁₈ was prepared at 750°C and is stable in air up to its melting temperature of 1160.1±5.0°C (standard error of estimate). Results of a Rietveld refinement using neutron powder diffraction confirmed that Bi₅AgNb₄O₁₈ is isostructural with Bi₃TiNbO₉, Bi₅NaNb₄O₁₈, and Bi₅KNb₄O₁₈. The structure was refined in the orthorhombic space group A2₁am, Z=2, and the lattice parameters are a=5.4915(2) Å, b=5.4752(2) Å, c=24.9282(8) Å, and V=749.52(4) Å³. The structure can be described as the m=2 member of the Aurivillius family, (Bi₂O₂)²⁺ (A_m−1B_mO_3m+1)²⁻ (where A=Bi and B=Ag, Nb), which is characterized by perovskite-like (A_m−1B_mO_3m+1)²⁻ slabs regularly interleaved with (Bi₂O₂)²⁺ layers. The octahedral [NbO₆] units are distorted with Nb-O distances ranging from 1.856(4) to 2.161(2) Å and the O-Nb-O angles ranging from 82.6(3)° to 98.5(3)°. These octahedra are tilted about the a- and c-axis by about 10.3° and 12.4°, respectively. Ag was found to substitute exclusively into the Bi-site that is located in the layer between the two distorted [NbO₆] units. Although the Ag substitutes into the Bi-site with the Bi:Ag ratio of 1:1, the existence of a superlattice was not detected using electron diffraction. A comparison of (Bi₂O₂)²⁺(A_m−1Nb_mO_3m+1)²⁻ structures (where A=Ag, Na, and K) revealed a relation between the pervoskite tolerance factor, t, and structural distortion. The reference pattern for Bi₅AgNb₄O₁₈ has been submitted to the International Centre for Diffraction Data (ICDD) for inclusion in the Powder Diffraction File.     

Ab initio structure determination and Rietveld refinement of Bi10Mo3O24 the member n=3 of the Bi2n+4MonO6(n+1) series

Bi₂O₃-MoO₃ system shows a large panoply of phases depending on Bi/Mo ratio, among them, the low temperature phases of the homologous series Bi_2(n+2)Mo_nO_6(n+1) with n=3, 4, 5 and 6. They exhibit, alike most of the phases of this system, strong fluorite sub-network. Nevertheless, a multitechnique approach has been followed in order to solve the crystal structure of the n=3 member, i.e. Bi₁₀Mo₃O₂₄. From ab initio indexing X-ray powder pattern cell parameters were derived. It belongs to the monoclinic system, space group C2, with cell parameters: a=23.7282(2) Å, b=5.64906(6) Å, c=8.68173(9) Å, β=95.8668(7)° with Z=2. The matrix relating this cell with the fluorite one is 4 0 1/0 1 0/ 0  and a cationic localization was derived. HRTEM allowed the cationic Bi and Mo order to be modified and specified, as well as to build up a full structural ab initio model on the basis of crystal chemistry considerations. Simultaneous Rietveld refinement of multipattern X-ray and neutron powder diffraction data taking advantage of the neutron scattering length for O location have been performed. The goodness of the model was ascertained by low reliability factors, weighted R_b=4.97% and R_f=3.21%. This complex Bi₁₀Mo₃O₂₄ structure, with 5Bi, 2Mo and 13O in different crystallographic positions of the asymmetric unit, shows good agreement between observed and calculated patterns within the data resolution. Moreover, the determination of this structure sets the basis for the crystallographic characterization of the complete family Bi_2(n+2)Mo_nO_6(n+1), whose guidelines are also evidenced in this paper.     

Synthesis crystal structure and ionic conductivity of Ca0.5Bi3V2O10 and Sr0.5Bi3V2O10

Two new compounds Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀ have been synthesized in the ternary system: MO-Bi₂O₃-V₂O₅ system (M=M²⁺). The crystal structure of Sr_0.5Bi₃V₂O₁₀ has been determined from single crystal X-ray diffraction data, space group and Z=2, with cell parameters a=7.1453(3) Å, b=7.8921(3) Å, c=9.3297(3) Å, α=106.444(2)°, β=94.088(2)°, γ=112.445(2)°, V=456.72(4) Å³. Ca_0.5Bi₃V₂O₁₀ is isostructural with Sr_0.5Bi₃V₂O₁₀, with, a=7.0810(2) Å, b=7.8447(2) Å, c=9.3607(2) Å, α=106.202(1)°, β=94.572(1)°, γ=112.659(1)°, V=450.38(2) Å³ and its structure has been refined by Rietveld method using powder X-ray data. The crystal structure consists of infinite chains of (Bi₂O₂) along c-axis formed by linkage of BiO₈ and BiO₆ polyhedra interconnected by MO₈ polyhedra forming 2D layers in ac plane. The vanadate tetrahedra are sandwiched between these layers. Conductivity measurements give a maximum conductivity value of 4.54×10⁻⁵ and 3.63×10⁻⁵ S cm⁻¹ for Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀, respectively at 725 °C.     

Structural studies of five layer Aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb)

The room temperature structures of the five layer Aurivillius phases A₂Bi₄Ti₅O₁₈ (A=Ca, Sr, Ba and Pb) have been refined from powder neutron diffraction data using the Rietveld method. The structures consist of [Bi₂O₂]²⁺ layers interleaved with perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks. The structures were refined in the orthorhombic space group B2eb (SG. No. 41), Z=4, and the unit cell parameters of the oxides are a=5.4251(2), b=5.4034(1), c=48.486(1); a=5.4650(2), b=5.4625(3), c=48.852(1); a=5.4988(3), b=5.4980(4), c=50.352(1); a=5.4701(2), b=5.4577(2), c=49.643(1) for A=Ca, Sr, Ba and Pb, respectively. The structural features of the compounds were found similar to n=2-4 layers bismuth oxides. The strain caused by mismatch of cell parameter requirements for the [Bi₂O₂]²⁺ layers and perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks were relieved by tilting of the TiO₆ octahedra. Variable temperature synchrotron X-ray studies for Ca and Pb compounds showed that the orthorhombic structure persisted up to 675 and 475 K, respectively. Raman spectra of the compounds are also presented.     

Synthesis and characterization of the novel Nb3O5F5 niobium oxyfluoride: the term n=3 of the NbnO2n−1Fn+2 series

The solid-state synthesis of the oxyfluoride Nb₃O₅F₅, its crystal structure determined from X-ray powder diffraction data as well as some physical characterizations, are reported. Nb₃O₅F₅ constitutes the term n=3 of the Nb_nO_2n−1F_n+2 series related to the Dion-Jacobson phases. It crystallizes, at room temperature, in the tetragonal system (space group I4/mmm (no. 139); Z=4; a=3.9135(1) Å, c=24.2111(2) Å, and V=370.80(3) Å³). The crystal structure appears to be an in-between of the three-dimensional network of NbO₂F and the two-dimensional packing of NbOF₃ (term n=1 of the Nb_nO_2n−1F_n+2 series). This layered structure consists of slabs made of three Nb(O,F)₆ corner-linked octahedra in thickness (n=3) shifted one from another by a ()/translation. Oxygen and fluorine atoms are randomly distributed over all the ligand sites.     

Crystal structure of the ‘mixed-layer’ Aurivillius phase Bi5TiNbWO15

The crystal structure of the Aurivillius phase Bi₅TiNbWO₁₅ has been analyzed in detail using powder X-ray and neutron diffraction. The structure can be described as a regular intergrowth of alternating single and double perovskite-like layers sandwiched between fluorite-like bismuth oxide layers, such that the layer sequence is … [WO₄]-[Bi₂O₂]-[BiTiNbO₇]-[Bi₂O₂] …. There is complete ordering of tungsten within the B sites of the single perovskite layer, so that the structure can be described as a direct intergrowth of the ‘component’ Aurivillius phases Bi₂WO₆ and Bi₃TiNbO₉. At 25 °C the structure adopts the polar orthorhombic space group I2cm, , , .     

Synthesis, structures and photocatalytic activities of microcrystalline ABi2Nb2O9 (A=Sr, Ba) powders

Microcrystalline ABi₂Nb₂O₉ (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. The as-prepared samples were characterized by the X-ray diffraction technique, BET surface area analysis, UV-vis diffuse reflectance spectrum, transmission electron microscopy, X-ray photoelectron spectroscopy and inductively coupled plasma-atomic emission spectrometry. The results indicated that single-phase orthorhombic SrBi₂Nb₂O₉ could be obtained after being calcined above 650 °C, while BaBi₂Nb₂O₉ was tetragonal. Based on the diffuse reflectance spectra, the band gaps of the obtained samples were calculated to be around 3.34-3.54 eV. For the photocatalytic redox reaction of methyl orange under UV-light irradiation, SrBi₂Nb₂O₉ exhibited higher photocatalytic activity than that of BaBi₂Nb₂O₉. The effects of the crystallinities, BET surface areas and crystal structures of the samples on the photocatalytic activities were discussed in detail.     

On the characterization of BiMO2NO3 (M=Pb, Ca, Sr, Ba) materials related with the Sillén X1 structure

The compounds BiMO₂NO₃, with M=Pb, Ca, Sr, and Ba, were obtained as single-phase products from solid-state reactions in an atmosphere of nitrous gases. The oxide nitrates with Pb and Ca crystallize in the tetragonal space group I4/mmm with two formula units per unit cell; the oxide nitrates with Sr and Ba crystallize in the orthorhombic space group Cmmm with four formula units per unit cell. Lattice parameters at room temperature are a=397.199(4), c=1482.57(2) pm for M=Pb; a=396.337(5), c=1412.83(3) pm for M=Ca; a=1448.76(3), b=567.62(1), c=582.40(1) pm for M=Sr and a=1536.50(8), b=571.67(3), c=597.55(3) pm for M=Ba. The structures, which were refined by powder X-ray diffraction, consist of alternating [BiMO₂]⁺ and [NO₃]⁻ layers stacked along the direction of the long axis. IR and thermogravimetric data are also given. The various M²⁺ cations in BiMO₂NO₃ are compatible with each other; therefore and because of their layer-type structure, these compounds are interesting precursors for oxide materials, e.g., the HTSC compounds (Bi,Pb)₂Sr₂Ca_n−1Cu_nO_x.     

The study of Bi3B5O12: synthesis, crystal structure and thermal expansion of oxoborate Bi3B5O12

The paper presents a new data on the crystal structure, thermal expansion and IR spectra of Bi₃B₅O₁₂. The Bi₃B₅O₁₂ single crystals were grown from the melt of the same stoichiometry by Czochralski technique. The crystal structure of Bi₃B₅O₁₂ was refined in anisotropic approximation using single-crystal X-ray diffraction data. It is orthorhombic, Pnma, a=6.530(4), b=7.726(5), c=18.578(5) Å, V=937.2(5) Å³, Z=4, R=3.45%. Bi³⁺ atoms have irregular coordination polyhedra, Bi(1)O₆ (d(B-O)=2.09-2.75 Å) and Bi(2)O₇ (d(B-O)=2.108-2.804 Å). Taking into account the shortest bonds only, these polyhedra are considered here as trigonal Bi(1)O₃ (2.09-2.20 Å) and tetragonal Bi(2)O₄ (2.108-2.331 Å) irregular pyramids with Bi atoms in the tops of both pyramids. The BiO₄ polyhedra form zigzag chains along b-axis. These chains alternate with isolated anions [B₂^IVB₃^IIIO₁₁]⁷⁻ through the common oxygen atoms to form thick layers extended in ab plane. A perfect cleavage of the compound corresponds to these layers and an imperfect one is parallel to the Bi-O chains. The Bi₃B₅O₁₂ thermal expansion is sharply anisotropic (α₁₁≈α₂₂=12, α₃₃=3×10⁻⁶ °C⁻¹) likely due to a straightening of the flexible zigzag chains along b-axis and decreasing of their zigzag along c-axis. Thus the properties like cleavage and thermal expansion correlate to these chains.     

Pyrochlore formation, phase relations, and properties in the CaO-TiO2-(Nb,Ta)2O5 systems

Phase equilibria studies of the CaO:TiO₂:Nb₂O₅ system confirmed the formation of six ternary phases: pyrochlore (A₂B₂O₆O′), and five members of the (110) perovskite-slab series Ca_n(Ti,Nb)_nO_3n+2, with n=4.5, 5, 6, 7, and 8. Relations in the quasibinary Ca₂Nb₂O₇−CaTiO₃ system, which contains the Ca_n(Ti,Nb)_nO_3n+2 phases, were determined in detail. CaTiO₃ forms solid solutions with Ca₂Nb₂O₇ as well as CaNb₂O₆, resulting in a triangular single-phase perovskite region with corners CaTiO₃-70Ca₂Ti₂O₆:30Ca₂Nb₂O₇-80CaTiO₃:20CaNb₂O₆. A pyrochlore solid solution forms approximately along a line from 42.7:42.7:14.6 to 42.2:40.8:17.0 CaO:TiO₂:Nb₂O₅, suggesting formulas ranging from Ca_1.48Ti_1.48Nb_1.02O₇ to Ca_1.41Ti_1.37Nb_1.14O₇ (assuming filled oxygen sites), respectively. Several compositions in the CaO:TiO₂:Ta₂O₅ system were equilibrated to check its similarity to the niobia system in the pyrochlore region, which was confirmed. Structural refinements of the pyrochlores Ca_1.46Ti_1.38Nb_1.11O₇ and Ca_1.51Ti_1.32V_0.04Ta_1.10O₇ using single-crystal X-ray diffraction data are reported (Fd3m (#227), a=10.2301(2) Å (Nb), a=10.2383(2) Å (Ta)), with Ti mixing on the A-type Ca sites as well as the octahedral B-type sites. Identical displacive disorder was found for the niobate and tantalate pyrochlores: Ca occupies the ideal 16d position, but Ti is displaced 0.7 Å to partially occupy a ring of six 96g sites, thereby reducing its coordination number from eight to five (distorted trigonal bipyramidal). The O′ oxygens in both pyrochlores were displaced 0.48 Å from the ideal 8b position to a tetrahedral cluster of 32e sites. The refinement results also suggested that some of the Ti in the A-type positions may occupy distorted tetrahedra, as observed in some zirconolite-type phases. The Ca-Ti-(Nb,Ta)-O pyrochlores both exhibited dielectric relaxation similar to that observed for some Bi-containing pyrochlores, which also exhibit displacively disordered crystal structures. Observation of dielectric relaxation in the Ca-Ti-(Nb,Ta)-O pyrochlores suggests that it arises from the displacive disorder and not from the presence of polarizable lone-pair cations such as Bi³⁺.