Verwey-type transition within the Pb3Rh7−xMnxO15 solid solution

A complete solid solution was found between isostructural Pb₃Mn₇O₁₅ and Pb₃Rh₇O₁₅. Single-crystals of two members of the solid solution Pb₃Rh_7−xMn_xO₁₅ (x=1.07 and 2.26) were grown and their crystal structures were determined. The Verwey-type transition for Pb₃Rh₇O₁₅ at 185 K remains with a 3% substitution of Mn for Rh but disappears with 4% substitution of Mn for Rh. The magnetic ordering temperature found for Pb₃Mn₇O₁₅ at about 70 K is maintained at a 43% substitution of Rh for Mn but has disappeared for 57% substitution of Rh for Mn. The unit cell volume of this layered structure contracts with increasing x for Pb₃Rh_7−xMn_xO₁₅ phases, but the structure actually expands in the direction perpendicular to the layers due to increased separation between the layers.     

Synthesis, structure, and magnetic properties of SrMn1−xGaxO3−δ (x=0-0.5) perovskites

We report the synthesis of SrMn_1−xGa_xO_3−δ perovskite compounds and describe the dependence of their phase stability and structural and physical properties over extended cation and oxygen composition ranges. Using special synthesis techniques derived from thermogravimetric measurements, we have extended the solubility limit of random substitution of Ga³⁺ for Mn in the cubic perovskite phase to x=0.5. In the cubic perovskite phase the maximum oxygen content is close to 3−x/2, which corresponds to 100% Mn⁴⁺. Maximally oxygenated solid solution compounds are found to order antiferromagnetically for x=0-0.4, with the transition temperature linearly decreasing as Ga content increases. Increasing the Ga content introduces frustration into the magnetic system and a spin-glass state is observed for SrMn_0.5Ga_0.5O_2.67(3) below 12 K. These properties are markedly different from the long-range antiferromagnetic order below 180 K observed for the layer-ordered compound Sr₂MnGaO_5.50 with nominally identical chemical composition.     

Structure and physical properties of ternary W5Si3-type antimonides and bismuthides Zr5M1-xPn2+x (M=Cr, Mn; Pn=Sb, Bi)

Four new ternary compounds Zr₅M_1-xPn_2+x (M=Cr, Mn; Pn=Sb, Bi) were synthesized by arc-melting and annealing at 800 °C. They crystallize in the tetragonal W₅Si₃-type structure. The crystal structure of Zr₅Cr_0.49(2)Sb_2.51(2) was refined from powder X-ray diffraction data by the Rietveld method (Pearson symbol tI32, tetragonal, space group I4/mcm, Z=4, a=11.1027(6) Å, c=5.5600(3) Å). Four-probe electrical resistivity measurements on sintered polycrystalline samples indicated metallic behavior. Magnetic susceptibility measurements between 2 and 300 K revealed temperature-independent Pauli paramagnetism for Zr₅Cr_1-xSb_2+x and Zr₅Cr_1-xBi_2+x, but a strong temperature dependence for Zr₅Mn_1-xSb_2+x and Zr₅Mn_1-xBi_2+x which was fit to the Curie-Weiss law for the latter with θ=-11.3 K and μ_eff=1.81(1) μ_B. Band structure calculations for Zr₅Cr_0.5Sb_2.5 support a structural model in which Cr and Sb atoms alternate within the chain of interstitial sites formed at the centers of square antiprismatic Zr₈ clusters.     

The crystal structure of the new ternary antimonide Dy3Cu20+xSb11−x (x≈2)

New ternary antimonide Dy₃Cu_20+xSb_11−x (x≈2) was synthesized and its crystal structure was determined by direct methods from X-ray powder diffraction data (diffractometer DRON-3M, CuKα-radiation, R_I=6.99%,R_p=12.27%,R_wp=11.55%). The compound crystallizes with the own cubic structure type: space group , Pearson code cF272, . The structure of the Dy₃Cu₂₀Sb_11−x (x≈2) can be obtained from the structure type BaHg₁₁ by doubling of the lattice parameter and subtraction of 16 atoms. The studied structure was compared with the structures of known compounds, which crystallize in the same space group with similar cell parameters.     

Crystal structures and polymorphism in compounds Bi6+xT1−xP2O15+y, T=first row transition metals and Pb

The compounds Bi_6+xT_1−xP₂O_15+y, T=Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn and Pb display five polymorphic forms. Polymorph A is formed by the Ti, Mn, Fe and Ni phases. Polymorph B is exhibited by Co and Cu compounds. The Cr phase crystallizes as polymorphic form C and the Zn phase crystallizes as polymorph D. The Pb compound crystallizes in a new structure type designated as polymorph E. The transition metal crystal structures demonstrate a similar motive. OBi₄ tetrahedra share edges to form two-dimensional Bi₂O₂ layers that are spanned by PO₄ tetrahedra and TO_6−y octahedra, pyramids and a trigonal bipyramid to form a three-dimensional network. Polymorph A crystallizes in space group C2; polymorph B is centrosymmetric with space group C2/c, the unit cell parameters differ and the unit cell volume is about double. Polymorph C crystallizes in space group and polymorph D exhibits space group C2. Bi_6.4Pb_0.6P₂O_15.2 can be considered as polymorph E, space group C2, with a new crystal structure but related stoichiometry.     

Electron-poor SrAuxIn4−x (0.5?x?1.2) and SrAuxSn4−x (1.3?x?2.2) phases with the BaAl4-type structure

Solid solutions SrAu_xIn_4−x (0.5?x?1.2) and SrAu_xSn_4−x (1.3?x?2.2) have been prepared at 700 °C and their structures characterized by powder and single-crystal X-ray diffraction. They adopt the tetragonal BaAl₄-type structure (space group I4/mmm, Z=2; SrAu_1.1(1)In_2.9(1), a=4.5841(2) Å, c=12.3725(5) Å; SrAu_1.4(1)Sn_2.6(1), a=4.6447(7) Å, c=11.403(2) Å), with Au atoms preferentially substituting into the apical over basal sites within the anionic network. The phase width inherent in these solid solutions implies that the BaAl₄-type structure can be stabilized over a range of valence electron counts (vec), 13.0-11.6 for SrAu_xIn_4−x and 14.1-11.4 for SrAu_xSn_4−x. They represent new examples of electron-poor BaAl₄-type compounds, which generally have a vec of 14. Band structure calculations confirm that substitution of Au, with its smaller size and fewer number of valence electrons, for In or Sn atoms enables the BaAl₄-type structure to be stabilized in the parent binaries SrIn₄ and SrSn₄, which adopt different structure types.     

Oxidation/reduction studies on ZryU1−yO2+x and delineation of a new orthorhombic phase in U-Zr-O system

In this communication, we report the oxidation and reduction behavior of fluorite type solid solutions in U-Zr-O. The maximum solubility of ZrO₂ in UO₂ lattice could be achieved with a mild oxidizing followed by reducing conditions. The role of valency state of U is more dominating in controlling the unit cell parameters than the incorporated interstitial oxygen in the fluorite lattice. The controlled oxidation studies on U-Zr-O solid solutions led to the delineation of a new distorted fluorite lattice at the U:Zr=2:1 composition. The detailed crystal structure analysis of this ordered composition Zr_0.33U_0.67O_2.33 (ZrU₂O₇) has been carried from the powder XRD data. This phase crystallizes in an orthorhombically distorted fluorite type lattice with unit cell parameters: a=5.1678(2), b=5.4848(2), c=5.5557(2) Å and V=157.47(1) Å³ (Space group: Cmcm, No. 63). The metal ions have distorted cubical polyhedra with anion similar to the fluorite structure. The excess anions are occupied in the interstitial (empty cubes) of the fluorite unit cell. The crystal structure and chemical analyses suggest approximately equal fractions of U⁴⁺ and U⁶⁺ in this compound. The details of the thermal stability as well as kinetics of formation and oxidation of ZrU₂O₇ are also studied using thermogravimetry.     

Structure and thermal conductivity of Na1−xGe3+z

Structural analyses as well as low temperature thermal conductivity is reported for the binary phase Na_1−xGe_3+z. Specimens were characterized by thermal analysis, conventional and synchrotron powder X-ray diffraction, neutron powder diffraction, ²³Na nuclear magnetic resonance spectroscopy, and electrical and thermal transport measurements. With structural characteristics qualitatively analogous to some aluminum-silicate zeolites, the crystal structure of this phase exhibits an unconventional covalently bonded tunnel-like Ge framework, accommodating Na in channels of two different sizes. Observed to be non-stochiometric, Na_1−xGe_3+z concurrently exhibits substantial structural disorder in the large channels and a low lattice thermal conductivity, of interest in the context of identifying novel low thermal conductivity intermetallics for thermoelectric applications.     

From ordered antiferromagnet to spin glass: A new phase Mn4Ir7−xMnxGe6

A new ternary phase, Mn₄Ir_7−xMn_xGe₆ (0?x?1.3), was studied by X-ray and neutron powder diffraction and SQUID magnetometry. The crystal structure is cubic, of the U₄Re₇Si₆ type, space group , Z=2, with the lattice parameter at 295 K. Within the limited range of homogeneity small variations of the composition yield dramatic changes of the magnetic structure. For x=0 long-range antiferromagnetic order is formed below the transition temperature 228 K, with large magnetic moments on Mn, 4.11(9) μ_B at 10 K, in a magnetic unit cell , c_M=2a_C. In contrast, for x=1.3 spin glass behavior is observed below 90 K. The Mn atoms form an ideal cubic framework, on which geometric frustration of competing nearest and next nearest neighbor antiferromagnetic interactions is suggested to explain the composition sensitive magnetic properties. A TiNiSi-type phase, IrMnGe, is found in samples of 1:1:1 composition quenched from the melt.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

Structural and magnetic characterization of Mn3IrGe and Mn3Ir(Si1−xGex): experiments and theory

The structural and magnetic properties of a new ternary Ir-Mn-Ge phase, Mn₃IrGe, as well as the solid solution Mn₃Ir(Si_1−xGe_x), 0?x?1, have been investigated by means of X-ray and neutron powder diffraction, magnetization measurements and first principles calculations. The crystal structure is cubic, of the AlAu₄-type (an ordered form of the β-Mn structure), Z=4, space group P2₁3, and the unit-cell dimension varies linearly with the silicon content. For all compositions, antiferromagnetic ordering is found below a critical temperature of about 225 K. The magnetic structure is noncollinear, as a result of frustrated magnetic interactions on a triangular network of Mn atoms, on which the moments rotate 120° around the triangle axes. The magnitude of the magnetic moment at 10 K is 3.39(4) μ_B for Mn₃IrGe. The theoretical calculations reproduce with very good accuracy the magnitudes as well as the directions of the experimentally observed magnetic moments.     

Preferential occupation of alkaline-earth metal sites in a seemingly disordered solid solution of Ca11−xSrxSb10: Single crystal structures of Ca8.63(5)Sr2.37Sb10 and Ca3.66(7)Sr7.34Sb10

Two new antimony based intermetallic phases, Ca_8.63(5)Sr_2.37Sb₁₀(1) and Ca_3.66(7)Sr_7.34Sb₁₀(2), crystallizing in Ho₁₁Ge₁₀ structure type (tetragonal, I4/mmm) have been synthesized and characterized. Although both Ca₁₁Sb₁₀ and Sr₁₁Sb₁₀ are known to be isostructural (Ho₁₁Ge₁₀ structure type) and hence all Ca sites should be accessible to Sr as well, it appears that certain sites are preferentially ordered by Ca in the mixed (Ca/Sr)₁₁Sb₁₀ compounds reported here. The crystal structure of Ca_8.63(5)Sr_2.37Sb₁₀ and Ca_3.66(7)Sr_7.34Sb₁₀ has been solved from single crystal X-ray data using direct methods and refined using full-matrix least-squares method. The structure can be described as bonded network of A-Sb (A=Ca, Sr) with Sb existing as isolated Sb³⁻, diantimony and square units. Simple valence electron count reveals these compounds to be Zintl phases. It is found that the larger Sr or Sr/Ca ions preferentially occupy sites that are closer to the diantimony anions as compared to the smaller Ca ions.     

Magnetic order and heavy fermion behavior in CePd1+xAl6−x: Synthesis, structure, and physical properties

The physical properties including magnetic susceptibility, specific heat, and electrical resistivity of single crystals are reported for the compound CePd_1+xAl_6−x (x=0.5) which crystallizes in the tetragonal SrAu₂Ga₅-type structure (space group P4/mmm). The compound was grown from an excess of molten Al flux from the respective elements and the crystal structure was established from single-crystal X-ray diffraction. Anomalies in the low temperature specific heat C_p(T) and electrical resistivity ρ(T) show that the compound undergoes ferromagnetic order at T_C=2.8 K. In the ordered state, CePd_1.5Al_5.5 displays heavy fermion behavior with a Sommerfeld coefficient of ca. 500 mJ/mol-K².     

Synthesis, crystal structure and magnetic properties of the spin ladder compounds La2(Cu1−xZnx)2O5 and La8(Cu1−xZnx)7O19

The influence of Zn-doping on the crystal structure and magnetic properties of the spin ladder compounds La₂Cu₂O₅ (4-leg) and La₈Cu₇O₁₉ (5-leg) have been investigated. The La₂(Cu_1−xZn_x)₂O₅ and La₈(Cu_1−xZn_x)₇O₁₉ solid solutions were obtained as single phases with x=0-0.1 via the solid-state reaction method in the temperature range between 1005-1010 °C and 1015-1030 °C in oxygen and air atmospheres, respectively. The lattice parameters a and c of the monoclinic crystal structures as well as the unit cell volume V increase with increasing x, while b and β decrease for both series. The magnetic susceptibilities χ of both series show a very similar behavior on temperature as well as on Zn-doping, which is supposed to be due to the similar Cu-O coordination in both La₂Cu₂O₅ and La₈Cu₇O₁₉. For low Zn-doping (x?0.04), a spin-chain like behavior is found. This quasi-one-dimensional behavior is strongly suppressed in both series for x?0.04. Here, the maximum (characteristic for spin chains) in χ(T) disappears and χ(T) decreases monotonically with increasing temperature.     

Composition-induced phase transition in Ca14Zn6−xGa10+xO35+x/2 (x=0.0 and 0.5)

Novel complex oxides Ca₁₄Zn₆Ga₁₀O₃₅ and Ca₁₄Zn_5.5Ga_10.5O_35.25 were prepared in air at 1200 °C, 72 h. Refinements of their crystal structures using X-ray powder diffraction data showed that Ca₁₄Zn₆Ga₁₀O₃₅ is ordered (S.G. F23, =0.0458, R_p=0.0485, R_wp=0.0659, χ²=1.88) and Ca₁₄Zn_5.5Ga_10.5O_35.25 disordered (S.G. F432, =0.0346, R_p=0.0601, R_wp=0.0794, χ²=2.82) variants of the crystal structure of Ca₁₄Zn₆Al₁₀O₃₅. In the crystal structure of Ca₁₄Zn₆Ga₁₀O₃₅, there are large empty voids, which could be partially occupied by additional oxygen atoms upon substitution of Zn²⁺ by Ga³⁺ as in Ca₁₄Zn_5.5Ga_10.5O_35.25. These oxygen atoms are introduced into the crystal structure of Ca₁₄Zn_5.5Ga_10.5O_35.25 only as a part of four tetrahedra (Zn, Ga)O₄ groups sharing common vertex. This creates a situation where even a minor change in the chemical composition leads to considerable anion and cation disordering resulting in a change of space group from F23 (no. 196) to F432 (no. 209).     

Mixed crystals in the system Cu2MnGexSn1−xS4: Phase analytical investigations and inspection of tetrahedra volumes

Cu₂MnGeS₄ crystallizes orthorhombic in a wurtzite superstructure type while Cu₂MnSnS₄ crystallizes in a tetragonal sphalerite superstructure type. Lattice constants and thermal analyses of the solid solution series Cu₂MnGe_xSn_1−xS₄ are presented. A two-phase region is found from Cu₂MnGe_0.3Sn_0.7S₄ to Cu₂MnGe_0.5Sn_0.5S₄. The cell volume of the mixed crystals increases with increasing Sn content. The melting points increase smoothly with increasing Ge content to x=0.5 and then steeply for higher Ge contents. The single crystal X-ray structure analysis of Cu₂MnGe_0.55Sn_0.45S₄ is presented. The refinement converges to R=0.0270 and wR₂=0.0586, Z is 2. The volumes of the tetrahedra [MS₄] (M=Cu, Mn, Ge, Sn) are calculated. From these volumes the differences in size of the tetrahedra are derived and compared with the corresponding differences in the end members of the solid solution series. It turns out that the resulting structure type in these materials depends on the volume differences of the constituting tetrahedra [MS₄].     

Synthesis and characterization of a NaSICON series with general formula Na2.8Zr2−ySi1.8−4yP1.2+4yO12 (0?y?0.45)

In this work, we present the synthesis and the characterization of ionic conducting ceramics of NaSICON-type (Natrium super ionic conductor). The properties of this ceramic make it suitable for use in electrochemical devices. These solid electrolytes can be used as sensors for application in the manufacturing of potentiometric gas sensors, for the detection of pollutant emissions and for environment control. The family of NaSICON that we studied has as a general formula Na_2.8Zr_2−ySi_1.8−4yP_1.2+4yO₁₂ with 0?y?0.45. The various compositions were synthesized by produced using the sol-gel method. The electric properties of these compositions were carried out by impedance spectroscopy. The results highlight the good conductivity of the Na_2.8Zr_1.775Si_0.9P_2.1O₁₂ composition.     

Superstructure of hollandite KxMg(8+x)/3Sb(16−x)/3O16 (x≈1.76)

Single crystals of K_xMg_(8+x)/3Sb_(16−x)/3O₁₆ (x≈1.76) with a hollandite superstructure were grown. Ordering schemes for guest ions (K) and the host structure were confirmed by the structure refinement using X-ray diffraction intensities. The space group is I4/m and cell parameters are a=10.3256(6), c=9.2526(17)Å with Z=3. Superlattice formation is primarily attributed to the Mg/Sb occupational modulation in the host structure. Mg/Sb ratios at two nonequivalent metal sites are 0.8977/0.1023 and 0.1612/0.8388. Two types of the cavity are seen in the tunnel, where parts of K ions deviate from the cavity center along the tunnel direction. Probability densities for K ions in the two cavities are different from each other, which seems to have arisen from the Mg/Sb modulation.     

Crystal structure of lanthanum bismuth silicate Bi2−xLaxSiO5 (x∼0.1)

A melting and glass recrystallization route was carried out to stabilize a new tetragonal form of Bi₂SiO₅ with bismuth partially substituted by lanthanum. The crystal structure of Bi_2−xLa_xSiO₅ (x∼0.1) was determined from powder X-ray and neutron diffraction data (space group I4/mmm, , c=15.227(1) Å, V=224.18 Å³, Z=2; reliability factors: R_Bragg=5.65%, R_p=14.6%, R_wp=16.8%, R_exp=8.3%, χ²=8.3 (X-ray) and R_Bragg=2.40%, R_p=8.1%, R_wp=7.5%, R_exp=4.2%, χ²=3.3 (neutrons); 11 structural parameters refined).The main effect of lanthanum substitution is to introduce, by removing randomly some bismuth 6s² lone pairs, a structural disorder in the surroundings of (Bi₂O₂)²⁺ layers, that is in the (SiO₃)²⁻ pyroxene files arrangement. It results in a symmetry increase relatively to the parent compound Bi₂SiO₅, which is orthorhombic. The two structures are compared.     

Ternary lithium stannides LixT3Sn7−x (T=Rh, Ir)

The ternary stannides Li_xRh₃Sn_7−x (x=0.45, 0.64, 0.80) and Li_xIr₃Sn_7−x (x=0.62 and 0.66) were synthesized from the elements in sealed tantalum tubes in a water-cooled sample chamber of an induction furnace. The samples were characterized by X-ray diffraction on powders and single crystals. The stannides adopt the cubic Ir₃Ge₇-type structure (space group , Z=4). In this structure type the tin atoms occupy the Wyckoff positions 12d and 16f and form two interpenetrating frameworks consisting of cubes and square antiprisms. The rhodium and iridium atoms center the square antiprisms and are arranged in pairs. With increasing lithium substitution the lattice parameter of Ir₃Sn₇ (936.7) decreases via 932.2 pm (x=0.62) to 931.2 pm (x=0.66), while the Ir-Ir distance remains almost the same (290 pm). A similar trend is observed for the rhodium compounds. The lithium atoms substitute Sn on both framework sites. However, the 16f site shows a substantially larger preference for Li occupation. This is in contrast to the isotypic magnesium based compounds.