The crystal structure of the new ternary antimonide Dy3Cu20+xSb11−x (x≈2)

New ternary antimonide Dy₃Cu_20+xSb_11−x (x≈2) was synthesized and its crystal structure was determined by direct methods from X-ray powder diffraction data (diffractometer DRON-3M, CuKα-radiation, R_I=6.99%,R_p=12.27%,R_wp=11.55%). The compound crystallizes with the own cubic structure type: space group , Pearson code cF272, . The structure of the Dy₃Cu₂₀Sb_11−x (x≈2) can be obtained from the structure type BaHg₁₁ by doubling of the lattice parameter and subtraction of 16 atoms. The studied structure was compared with the structures of known compounds, which crystallize in the same space group with similar cell parameters.     

Synthesis and CO2 capture evaluation of Li2−xKxZrO3 solid solutions and crystal structure of a new lithium-potassium zirconate phase

Solid solutions of lithium and potassium metazirconates Li_2−xK_xZrO₃ (where, 0?x?2) were prepared by coprecipitation. Samples were characterized by powder X-ray diffraction, scanning electron microscopy, and thermogravimetric analyses. Results showed that the solubility limits of potassium into Li₂ZrO₃ is x=0.2. Furthermore, at higher potassium concentrations, a new phase was synthesized, Li_2.27K_1.19Zr_2.16O_6.05. For structural studies of this new phase, XRD data were analyzed by Rietveld refinements. Additionally, at high potassium concentrations different phases of ZrO₂ were found, as potassium tends to sublimate. On the other hand, lithium-potassium metazirconate solid solutions, Li_2−xK_xZrO₃, were tested as CO₂ captors. Thermal analyses into a CO₂ flux showed that Li_2−xK_xZr₂O₃ solid solutions present a better CO₂ absorption than Li₂ZrO₃ pure. The differences observed in the CO₂ sorption processes were explained with thermodynamic data.     

Polymorphism in yttrium molybdate Y2Mo3O12

Yttrium molybdate (Y₂Mo₃O₁₂) has been prepared by non-hydrolytic sol–gel chemistry. The phase evolution upon heating was investigated using in situ and ex situ heat treatments combined with powder X-ray diffraction. This method has led to the isolation of two orthorhombic phases with different atomic connectivity. Yttrium adopts 6- and 7-coordinate sites in the Pbcn and Pba2 structures, respectively. Cocrystallization of both phases was observed in a narrow temperature range, suggesting that crystallization kinetics play a major role in phase formation. It was found that the Pba2 phase is the stable polymorph below 550 °C, and converts to Pbcn at higher temperatures.     

Composition-induced phase transition in Ca14Zn6−xGa10+xO35+x/2 (x=0.0 and 0.5)

Novel complex oxides Ca₁₄Zn₆Ga₁₀O₃₅ and Ca₁₄Zn_5.5Ga_10.5O_35.25 were prepared in air at 1200 °C, 72 h. Refinements of their crystal structures using X-ray powder diffraction data showed that Ca₁₄Zn₆Ga₁₀O₃₅ is ordered (S.G. F23, =0.0458, R_p=0.0485, R_wp=0.0659, χ²=1.88) and Ca₁₄Zn_5.5Ga_10.5O_35.25 disordered (S.G. F432, =0.0346, R_p=0.0601, R_wp=0.0794, χ²=2.82) variants of the crystal structure of Ca₁₄Zn₆Al₁₀O₃₅. In the crystal structure of Ca₁₄Zn₆Ga₁₀O₃₅, there are large empty voids, which could be partially occupied by additional oxygen atoms upon substitution of Zn²⁺ by Ga³⁺ as in Ca₁₄Zn_5.5Ga_10.5O_35.25. These oxygen atoms are introduced into the crystal structure of Ca₁₄Zn_5.5Ga_10.5O_35.25 only as a part of four tetrahedra (Zn, Ga)O₄ groups sharing common vertex. This creates a situation where even a minor change in the chemical composition leads to considerable anion and cation disordering resulting in a change of space group from F23 (no. 196) to F432 (no. 209).     

Ab initio structure determination and Rietveld refinement of Bi10Mo3O24 the member n=3 of the Bi2n+4MonO6(n+1) series

Bi₂O₃-MoO₃ system shows a large panoply of phases depending on Bi/Mo ratio, among them, the low temperature phases of the homologous series Bi_2(n+2)Mo_nO_6(n+1) with n=3, 4, 5 and 6. They exhibit, alike most of the phases of this system, strong fluorite sub-network. Nevertheless, a multitechnique approach has been followed in order to solve the crystal structure of the n=3 member, i.e. Bi₁₀Mo₃O₂₄. From ab initio indexing X-ray powder pattern cell parameters were derived. It belongs to the monoclinic system, space group C2, with cell parameters: a=23.7282(2) Å, b=5.64906(6) Å, c=8.68173(9) Å, β=95.8668(7)° with Z=2. The matrix relating this cell with the fluorite one is 4 0 1/0 1 0/ 0  and a cationic localization was derived. HRTEM allowed the cationic Bi and Mo order to be modified and specified, as well as to build up a full structural ab initio model on the basis of crystal chemistry considerations. Simultaneous Rietveld refinement of multipattern X-ray and neutron powder diffraction data taking advantage of the neutron scattering length for O location have been performed. The goodness of the model was ascertained by low reliability factors, weighted R_b=4.97% and R_f=3.21%. This complex Bi₁₀Mo₃O₂₄ structure, with 5Bi, 2Mo and 13O in different crystallographic positions of the asymmetric unit, shows good agreement between observed and calculated patterns within the data resolution. Moreover, the determination of this structure sets the basis for the crystallographic characterization of the complete family Bi_2(n+2)Mo_nO_6(n+1), whose guidelines are also evidenced in this paper.     

Synthesis and structural study of a new NASICON-type solid solution: Li1−xLax/3Zr2(PO4)3

A new complete solid solution of NASICON-type compounds between LiZr₂(PO₄)₃ and La_1/3Zr₂(PO₄)₃ was evidenced with the general formula Li_1−xLa_x/3Zr₂(PO₄)₃ (0?x?1). These phases were synthesized by a complex polymerizable method and structurally characterized from Rietveld treatment of their X-ray and neutron powder diffraction data. This solid solution results from the substitution mechanism Li⁺→1/3La³⁺+2/3□ leading to an increase of the vacancies number correlated to an increase of the La content. According to this substitution mechanism, the general formula can then be written Li_1−xLa_x/3□_2x/3Zr₂(PO₄)₃ (0?x?1) in order to underline the correlation between the La content and the vacancies rate. For all the compounds, the structure is clearly related to that of the NASICON family with three crystallographic domains evidenced. For 0?x?0.5, all the members adopt at high temperature the typical NASICON-type structure (s.g. R3¯c), while at lower temperature, their structure distorts to a triclinic form (s.g. C 1¯), as observed for LiZr₂(PO₄)₃ prepared above 1100 °C. Moreover, in this domain, the reversible transition is clearly soft and the transition temperature strongly depends of the x value. For 0.6?x?0.9, the compounds crystallize in a rhombohedral cell (s.g. R3¯), while for x=1, the phase La_1/3Zr₂(PO₄)₃ is obtained (s.g. P3¯, Z=6, a=8.7378(2) Å, c=23.2156(7) Å).This paper is devoted to the structure analysis of the series Li_1−xLa_x/3Zr₂(PO₄)₃ (0?x?1), from X-ray and neutron powder thermo diffraction and transmission electron microscopy (TEM) studies.     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.     

Order-disorder in In perovskites: The example of A(In2/3B″1/3)O3 (A=Ba, Sr; B″=W, U)

We describe the preparation and structural characterization of four In-containing perovskites from neutron powder diffraction (NPD) and X-ray powder diffraction (XRPD) data. Sr₃In₂B″O₉ and Ba(In_2/3B″_1/3)O₃ (B″=W, U) were synthesized by standard ceramic procedures. The crystal structure of the W-containing perovskites and Ba(In_2/3U_1/3)O₃ have been revisited based on our high-resolution NPD and XRPD data, while for the new U-containing perovskite Sr₃In₂UO₉ the structural refinement was carried out from high-resolution XRPD data. At room temperature, the crystal structure for the two Sr phases is monoclinic, space group P2₁/n, where the In atoms occupy two different sites Sr₂[In]_2d[In_1/3B″_2/3]_2cO₆, with a=5.7548(2) Å, b=5.7706(2) Å, c=8.1432(3) Å, β=90.01(1)° for B″=W and a=5.861(1) Å, b=5.908(1) Å, c=8.315(2) Å, β=89.98(1)° for B″=U. The two phases with A=Ba should be described in a simple cubic perovskite unit cell (S.G. Pm3¯m) with In and B″ distributed at random at the octahedral sites, with a=4.16111(1) Å and 4.24941(1) Å for W and U compounds, respectively.     

A Structural Investigation of La2(GeO4)O and Alkaline-Earth-Doped La9.33(GeO4)6O2

The structures of the oxyorthogermanate La₂(GeO₄)O and the apatite-structured La_9.33(GeO₄)₆O₂ have been refined from powder neutron diffraction data. La₂(GeO₄)O crystallizes in a monoclinic unit cell (P2₁/c) and is cation stoichiometric in contrast to previous reports. La_9.33(GeO₄)₆O₂ crystallizes in a hexagonal unit cell (P6₃/m) and the powder diffraction data show anisotropic peak broadening that is observed in electron diffraction patterns as incommensurate diffuse spots at hkq reciprocal planes (with q=1.6-1.7) and can be attributed to a correlated disorder in the “apatite channels”. This compound was doped up to a nominal composition close to M₂La₈(GeO₄)₆O₂ with M=Ca, Sr, Ba. The dopant ions preferentially occupy the 4f sites as the number of La vacancies decreases. The measured ionic conductivity of La_9.33(GeO₄)₆O₂ is about 3 orders of magnitude larger than for La₂(GeO₄)O at high temperatures and decreases with increasing dopant content from the highest value of about 0.16 S cm⁻¹ at 1160 K.     

On phase equilibria and crystal structures in the systems Ce-Pd-B and Yb-Pd-B. Physical properties of R2Pd13.6B5 (R=Yb, Lu)

Phase equilibria and crystal structures of ternary compounds were determined in the systems Ce-Pd-B and Yb-Pd-B at 850 °C in the concentration ranges up to 45 and 33 at% of Ce and Yb, respectively, employing X-ray single crystal and powder diffraction. Phase relations in the Ce-Pd-B system at 850 °C are governed by formation of extended homogeneity fields, τ₂-CePd₈B_2−x (0.10<x<0.48); τ₃-Ce₃Pd_25−xB_8−y (1.06<x<1.87; 2.20<y<0.05), and CePd₃B_x (0<x<0.65) the latter arising from binary CePd₃. Crystallographic parameters for the new structure type τ₂-CePd₈B_2−x (space group C2/c, a=1.78104(4) nm, b=1.03723(3) nm, c=1.16314(3), β=118.515(1)° for x=0.46) were established from X-ray single crystal diffraction. The crystal structures of τ₂-CePd₈B_2−x and τ₃-Ce₃Pd_25−xB_3−y are connected in a crystallographic group-subgroup relationship. Due to the lack of suitable single crystals, the novel structure of τ₁-Ce₆Pd_47−xB₆ (x=0.2, C2/m space group, a=1.03594(2) nm, b=1.80782(3) nm, c=1.01997(2) nm, β=108.321(1)°) was determined from Rietveld refinement of X-ray powder diffraction data applying the structural model obtained from single crystals of homologous La₆Pd_47−xB₆ (x=0.19) (X-ray single crystal diffraction, new structure type, space group C2/m, a=1.03988(2) nm, b=1.81941(5) nm, c=1.02418(2) nm, β=108.168(1)°).The Yb-Pd-B system is characterized by one ternary compound, τ₁-Yb₂Pd₁₄B₅, forming equilibria with extended solution YbPd₃B_x, YbB₆, Pd₅B₂ and Pd₃B. The crystal structures of both Yb₂Pd₁₄B₅ and isotypic Lu₂Pd₁₄B₅ were determined from X-ray Rietveld refinements and found to be closely related to the Y₂Pd₁₄B₅-type (I4₁/amd). The crystal structure of binary Yb₅Pd_2−x (Mn₅C₂-type) was confirmed from X-ray single crystal data and a slight defect on the Pd site (x=0.06) was established.The three structures τ₁-Ce₆Pd_47−xB₆, τ₂-CePd₈B_2−x and τ₃-Ce₃Pd_25−xB_8−y are related and can be considered as the packings of fragments observed in Nd₂Fe₁₄B structure with different stacking of common structural blocks.Physical properties for Yb₂Pd_13.6B₅ (temperature dependent specific heat, electrical resistivity and magnetization) yielded a predominantly Yb-4f¹³ electronic configuration, presumably related with a magnetic instability below 2 K. Kondo interaction and crystalline electric field effects control the paramagnetic temperature domain.     

La(OH)3和 La2O2CO3纳 米 棒 的 合 成 及 其 催 化 Claisen-Schmidt缩合反应性能简

通过调节溶液的pH值,在水热条件下合成出长径比为2-45的La（OH）₃纳米棒. 对水热合成过程中间体的结构演变分析,发现高碱度有利于小尺寸晶核的形成,La（OH）₃晶体结构的各向异性导致这些晶种沿着C轴方向生长,进而形成纳米棒结构. 将La（OH）₃纳米棒前驱体于773 K焙烧可以得到长径比为2-20的La₂O₂CO₃纳米棒. 随着长径比的增加,La₂O₂CO₃纳米棒暴露的（110）晶面逐渐增加,La³⁺-O^2-碱性位的数目也从0.08增加到0.24 mmol/g. 因此,在Claisen-Schmidt缩合反应中,La₂O₂CO₃纳米棒催化剂上的反应速率随着长径比的增加而逐渐增大.     

Direct syntheses of Lan+1NinO3n+1 phases (n=1, 2, 3 and ∞) from nanosized co-crystallites

A new direct route for the “bottom up” syntheses of phases in the La_n+1Ni_nO_3n+1 series (n=1, 2, 3 and ∞) has been achieved via single-step heat treatments of nanosized co-crystallized precursors. The co-crystallized precursors were prepared using a continuous hydrothermal flow synthesis system that uses a superheated water flow at ca. 400 °C and 24.1 MPa to produce nanoparticulate slurries. Overall, a significant reduction in time and number of steps for the syntheses of La₃Ni₂O₇ and La₄Ni₃O₁₀ was achieved compared with more conventional synthesis methods, which typically require multiple homogenization and reheating steps over several days.     

Composition dependence of the photophysical and photocatalytic properties of (AgNbO3)1−x(NaNbO3)x solid solutions

A series of orthorhombic photocatalysts (AgNbO₃)_1−x(NaNbO₃)_x solid solutions have been synthesized by a solid-state reaction method. The composition dependence of the photophysical and photocatalytic properties of synthesized solid solutions has been investigated systematically. With an increase in the content of NaNbO₃, we found that (1) the lattice parameters decreased; (2) the Nb-O bond length in NbO₆ octahedron reduced; (3) the band gap increased; and (4) the mean particle size decreased while the Brunauer-Emmett-Teller (BET) surface area increased. Photocatalytic activities of the (AgNbO₃)_1−x(NaNbO₃)_x (0?x?0.5) samples were evaluated from gaseous 2-propanol (IPA) decomposition into acetone and CO₂ under visible-light irradiation emitted from blue-light-emitting diodes (BLEDs; light intensity: 0.01 mW cm⁻²). Among all the samples, the (AgNbO₃)_0.6(NaNbO₃)_0.4 sample showed the highest photocatalytic activity.     

Pressure-induced amorphization in Y2(WO4)3: in situ X-ray diffraction and Raman studies

The high-pressure behavior of Y₂(WO₄)₃ has been investigated at room temperature by in situ X-ray diffraction and Raman scattering measurements. Both the studies show that beyond ∼3 GPa, this compound smoothly transforms from the ambient orthorhombic phase to a disordered phase. The structural modifications are found to be reversible up to ∼4 GPa but become irreversible at higher pressures. Low pressures of transformation imply that these changes are intrinsic and not due to non-hydrostatic stresses. In addition, the correlation between the stability range of orthorhombic phase and counter cation size supports that this compound has a large field of negative thermal expansion in this family of compounds.     

Phase transitions in A-site substituted perovskite compounds: The (Ca1-2xNaxLax)TiO3 (0?x?0.5) solid solution

The (Ca_1-2xNa_xLa_x)TiO₃ (0?x?0.5) A-site substituted perovskite compounds have been synthesized and characterized by XRD and Raman spectroscopy at room temperature. The XRD powder diffraction study suggests that the end-member Na_1/2La_1/2TiO₃ crystallizes in the tetragonal space group I4/mcm. The phase transition from Pbnm to I4/mcm is located between x=0.34 and 0.39 and is driven by the variation of ionic radii at the A-site. The observed Raman modes are in agreement with group theory analysis, and the relationships between the behavior of structural parameters (e.g. Ti-O-Ti bond angle), indicated by long-range order, and the corresponding Raman frequency shifts and intensity evolution, indicated by short-range order, are established and discussed in terms of the radius effect and the mass effect.     

The non-centrosymmetric borate oxides, MBi2B2O7 (M=Ca, Sr)

Two novel noncentrosymmetric borates oxides, MBi₂B₂O₇ or MBi₂O(BO₃)₂ (MCa, Sr), have been synthesized by solid-state reactions in air at temperatures in the 600-700 °C range. Their crystal structures have been determined ab initio and refined using powder neutron diffraction data. CaBi₂B₂O₇ crystallizes in the orthorhombic Pna2₁ space group with a=8.9371(5) Å, b=5.4771(3) Å, c=12.5912(7) Å, Z=4, R_wp=0.118, χ²=2.30. SrBi₂B₂O₇ crystallizes in the hexagonal P6₃ space group with a=9.1404(4) Å, c=13.0808(6) Å, Z=6, R_wp=0.115, χ²=4.15. Large displacement parameters suggest the presence of disorder in SrBi₂B₂O₇ as also revealed by diffuse 2×a superstructure reflections in electron diffraction patterns. Both structures are built of identical (001) neutral layers of corner-sharing BO₃ triangles and MO₆ trigonal prisms forming six-membered rings in which Bi₂O groups are located. Adjacent layers are stacked in a staggered configuration and connected through weak Bi-O bonds. A moderate efficiency for second harmonic generation (SHG) has been measured for a powder sample of CaBi₂B₂O₇ (d_eff=2d_eff(KDP)).     

Multianvil high-pressure/high-temperature preparation, crystal structure, and properties of the new oxoborates Dy4B6O14(OH)2 and Ho4B6O14(OH)2

This paper reports about two new hydrogen-containing rare-earth oxoborates RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho) synthesized under high-pressure/high-temperature conditions from the corresponding rare-earth oxides, boron oxide, and water using a Walker-type multianvil equipment at 8 GPa and 880 °C. The single crystal structure determination of Dy₄B₆O₁₄(OH)₂ showed: Pbcn, a=1292.7(2), b=437.1(2), , Z=2, R1=0.0190, and wR2=0.0349 (all data). The isotypic holmium species revealed: Pbcn, a=1292.8(2), b=436.2(2), , Z=2, R1=0.0206, and wR2=0.0406 (all data). The compounds exhibit a new type of structure, which is built up from layers of condensed BO₄-tetrahedra. Between the layers, the rare-earth cations are coordinated by 7+2 oxygen atoms. Furthermore, we report about temperature-resolved in situ powder diffraction measurements, DTA/TG, and IR-spectroscopic investigations into RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho).     

The pyrochlore to ‘defect fluorite’ transition in the Y2(ZryTi1−y)2O7 system and its underlying crystal chemistry

A careful investigation of the previously reported single phase, pyrochlore structure type Y₂(Zr_yTi_1−y)₂O₇, 0?y?0.9, (YZT) solid solution has been carried out. Given the known slow rate of diffusion of cations in fluorite-related stabilized zirconia systems and the consequent difficulty in achieving equilibrium, careful attention was paid to synthesis procedures while Guinier XRD and electron diffraction were used to investigate the synthesized materials. As a consequence, a subtle but nonetheless clear two-phase region separating a pyrochlore-type solid solution field (from 0?y?∼0.54) from a “defect fluorite” type solid solution field (from ∼0.68?y?1) has been found. The underlying crystal chemistry of the system has been investigated using the bond valence sum approach. The dielectric properties have also been measured as a function of composition. The dielectric constant and dielectric loss of the lowest y compounds are potentially quite useful but deteriorate rapidly with increasing Zr content.     

Interactions of Ba2YCu3O6+y with the Gd3NbO7 buffer layer in coated conductors

A systematic study of the chemical interaction of Ba₂YCu₃O_6+y and Gd₃NbO₇ was conducted under two processing conditions: purified air (21% p_o2), and 100 Pa p_o2 (0.1% p_o2). Phases present along the pseudo-binary join Ba₂YCu₃O_6z and Gd₃NbO₇ were found to be in two five-phase volumes within the system. Three common phases that are present in all samples are (Y,Gd)₂Cu₂O₅, Ba(Y,Gd)₂CuO₅ and Cu₂O or CuO (depending on the processing conditions). The assemblies of phases can be categorized in three regions, with Ba₂YCu₃O_6+y: Gd₃NbO₇ ratios of (I)<5.5:4.5; (II)=5.5:4.5; and (III)>5.5:4.5. The lowest melting temperature of the system was determined to be ≈938 °C in air, and 850 °C at 100 Pa p_o2. Structure determinations of two selected phases, Ba₂(Gd_xY_1−x)NbO₆ (Fm3¯m, No. 225), and (Gd_xY_3−x)NbO₇ (C222₁, No. 20 and Ccmm, No. 63), were completed using the X-ray Rietveld refinement technique. Reference X-ray powder diffraction patterns for selected phases of Ba₂(Gd_xY_1−x)NbO₆ (x=0.2, 0.4, 0.6, and 0.8) and (Gd_xY_3−x)NbO₇ (x=0.6, 1.2, 1.8, 2.4 and 3) have been prepared for inclusion in the Powder Diffraction File (PDF).     

Phase relations in NaxCrxTi8−xO16 at 1350 °C and crystal structure of hollandite-like Na2Cr2Ti6O16

Phase relations of rutile, freudenbergite, and hollandite structures were examined in the pseudobinary system NaCrO₂-TiO₂ (i.e., Na_xCr_xTi_8−xO₁₆) at 1350 °C. The hollandite structure was obtained in the composition range 1.7?x?2.0. The symmetry of the samples at room temperature was tetragonal for x=1.7 and 1.75, and monoclinic for x=1.8 and above. Single crystals of monoclinic hollandite Na₂Cr₂Ti₆O₁₆ were grown and the structure refinement has been carried out using an X-ray diffraction technique. The space group was I2/m and cell parameters were a=10.2385(11), b=2.9559(9), c=9.9097(11)Å, and β=90.545(9)° with Z=1. The Na ion distribution in the tunnel was markedly deformed from that in the tetragonal form. It was suggested that Cr/Ti ratios were different between the two framework metal sites.