Synthesis and application of 4-(N,N-dimethylaminosulfonyl)-7-N-methylhydrazino-2,1,3-benzoxadiazole (MDBDH) as a new derivatizing agent for aldehydes

In a five step synthesis, 4-(N,N-dimethylaminosulfonyl)-7-N-methylhydrazino-2,1,3-benzoxadiazole (MDBDH) was prepared in high yields as a stable new derivatizing agent for carbonyl compounds. Reagent and derivatives have not been described in literature before. Major advantage of this substance compared with similar reagents is its improved solubility in polar solvents, e.g. methanol and ethanol. MDBDH reacts with aldehydes in the presence of an acidic catalyst under formation of the corresponding hydrazones. These are separated by means of reversed-phase liquid chromatography and detected UV/vis spectroscopically at wavelengths around 450 nm, depending on the individual hydrazone. MDBDH reacts with oxidizers as nitrogen dioxide and nitrite to only one product, 4-(N,N-dimethylaminosulfonyl)-7-methylamino-2,1,3-benzoxadiazole (MDBDA), which can easily be separated from the hydrazones of lower aldehydes. Due to large molar absorptivities and absorption maxima at wavelengths > 430 nm, limits of detection range from 4 × 10^–8 to 6 × 10^–8 mol · L^–1, and limits of quantification range from 1 × 10^–7 to 2 × 10^–7 mol · L^–1 for the individual hydrazones. The method was applied to the determination of aldehydes in automobile exhaust. Received: 31 July 2000 / Revised: 9 October 2000 / Accepted: 18 October 2000     

Synthesis of 4-[2-(N,N-dimethylamino)ethylaminosulfonyl]-7-N-methylhydrazino-2,1,3-benzoxadiazole (DAABD-MHz) as a derivatization reagent for aldehydes in liquid chromatography/electrospray ionization-tandem mass spectrometry

Benzofurazan derivatization reagent, 4-[2-(N,N-dimethylamino)ethylaminosulfonyl]-7-N-methylhydrazino-2,1,3-benzoxadiazole (DAABD-MHz), for aldehydes in liquid chromatography/electrospray ionization-tandem mass spectrometry (LC/ESI-MS/MS), was synthesized. DAABD-MHz reacted with aliphatic aldehydes under mild conditions. The generated derivatives were separated on a reversed-phase column and detected by ESI-MS/MS with detection limits of 30-60 fmol on-column. Upon collision-induced dissociation, a single and intense fragment ion at m/z 151 was observed. These results suggested that DAABD-MHz was suitable as a derivatization reagent in LC/ESI-MS/MS.     

Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).     

Fluorogenic reagent for thiols: 4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole

4-(N,N-Dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F) was synthesised for use as a more reactive, thiol-specific fluorogenic reagent than 4-(aminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (ABD-F). The former had negligible fluorescence whereas its thiol derivatives fluoresced intensely at about 510 nm (excitation occurred at about 380 nm). The DBD-F reacted quantitatively with thiols after 10 min at 50 degrees C and pH 8.0 and the reaction rates were several times higher than those with ABD-F; it is suggested that the electron withdrawing effect of the dimethylsulphonamide group (SO2NMe2) is larger than that of the sulphonamide group (SO2NH2). No reaction occurred with alanine, proline, cystine or cysteic acid under the same conditions. The fluorescence intensities of the derivatives were found to be higher in neutral and acidic media than in alkaline solutions. The thiol derivatives of DBD-F were separated by high-performance liquid chromatography and detected fluorimetrically, the detection limits being 0.92, 0.16, 0.13, 0.16 and 0.32 pmol for cysteine, glutathione, homocysteine, N-acetylcysteine and alpha-mercaptopropionylglycine, respectively. The method was applied to the determination of thiols in rat tissues.     

Synthesis of benzofurazan derivatization reagents for carboxylic acids and its application to analysis of fatty acids in rat plasma by high-performance liquid chromatography-electrospray ionization mass spectrometry

The derivatization regents for carboxylic acids, DAABD-AE (4-[2-(N,N-dimethylamino)ethylaminosulfonyl]7-(2-aminoethylamino)-2,1,3-benzoxadiazole), MePZBD-AE ([4-(4-N-methyl)piperazinosulfonyl]-7-(2-aminoethylamino)-2,1,3-benzoxadiazole) and APZBD-NHMe ([4-(4-N-aminoethyl)piperazinosulfonyl]-7-methylamino-2,1,3-benzoxadiazole) were developed for electrospray ionization-mass spectrometry (ESI-MS). The derivatization reaction with fatty acids was completed at 60 degrees C within 30 min. The derivatives of fatty acids were separated on a reversed-phase column and detected with ESI-MS. The detection limits attained for fatty acids were femtomol range and the calibration curves were linear over the range from 0.1 to 100 pmol (r2 > 0.992) for DAABD-AE and MePZBD-AE. DAABD-NHMe was applied to the analysis of fatty acids in rat plasma samples.     

R(-)-4-(3-Isothiocyanatopyrrolidin-1-yl)-7-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole, a fluorescent chiral tagging reagent: sensitive resolution of chiral amines and amino acids by reversed-phase liquid chromatography

The usefulness of R(-)-4-(3-isothiocyanatopyrrolidin-1-yl)-7-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole [R(-)-DBD-PyNCS], a fluorescent chiral tagging reagent, for the determination of racemic amines and amino acids, was studied. The reagent reacted with beta-blockers selected as representative secondary amines to produce corresponding fluorescent diastereomers (excitation at 460 nm and emission at 550 nm). The yields of the derivatization reaction were dependent on the stereostructure arround the NH group in beta-blockers. The resulting diastereomers were completely separated with single chromatographic run using linear gradient elutions by reversed-phase chromatography. R(-)-DBD-PyNCS was also applied to the determination of DL-amino acid, considered to be one of the primary amines, in human urine and foodstuffs. DL-amino acids tested equally reacted with the reagent, and the thiocarbamoyl derivatives were separated with an ODS column. The epimerization during the derivatization reaction was negligible judging from the resolution of opposite diastereomers on the chromatogram. The occurence of D-amino acids (D-Ala, D-Ser, D-Asp and/or D-Glu) was identified in the samples tested. The structures and the purities were elucidated with on-line HPLC-MS. The chiral reagent possessing an isothiocyanate group (-NCS) in the structure seems to be applicable to continuous sequential analysis of peptides containing D-amino acids. The thiocarbamoyl derivatives obtained from the reaction with DL-amino acids were converted to thiohydantoins via thiazolinones in acidic medium. The thiohydantoins produced from acidic, basic, neutral, hydroxyl and aromatic amino acids were completely separated with isocratic elutions using acidic mobile phase containing 0.1% TFA. The separations were sufficient for the identification of DL-amino acid in peptide sequences. Although the epimerization during the conversion reaction to thiohydantoins was not avoidable, the descrimination of D- and L-configuration was demonstrated with some commercially available peptides such as beta-lipotropin and [D-Ala2]-deltorphin II. The Edman degaradation method using R(-)-DBD-PyNCS was also adopted to autoanlaysis by gas-phase sequencer. The separation and the detection (UV 254 nm) conditions of the derivatives were used without any change from those for the Edman degradation method using PITC as the tagging reagent. The three DL-amino acid residues (Tyr, Ala and Gly) in [L-Ala2]-leucine-enkephalin and [D-Ala2]-leucine-enkephalin were perfectly identidied with the autoanalysis.     

Amino acid composition analysis of minute amounts of cysteine-containing proteins using 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-fluoro-7-nitro-2,1,3-benzoxadiazole in combination with HPLC

The simultaneous determination of amino acid composition including cysteine of egg albumin, a model protein containing a/s cysteine residue, is reported. All the thiol groups of the cysteine residue(s) of egg albumin were labelled with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole, a fluorogenic reagent for thiol groups. The labeled egg albumin was hydrolyzed in 6N HCl at 110 degrees C for 24 h. The hydrolysate was lyophilized, derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole, a fluorogenic reagent for amines, and subjected to HPLC. 18 derivatized amino acids including double labelled cysteine were separated within 90 min on a Nucleosil ODS column (150 mm X 4.6 mm i.d.; 5 microns), and detected at 530 nm (ex. 470 nm) in a range from 90 fmol (aspartic acid) to 1.3 pmol (cysteine) (S/N = 3). Composition ratios of amino acids of egg albumin were similar to theoretical values except for methionine, which would be destroyed under the present acid hydrolysis condition. Analytical methods for cysteine residues are reviewed, and the availability of fluorogenic reagents having the benzofurazan structure is also discussed.     

Fluorogenic and fluorescent labeling reagents with a benzofurazan skeleton

Fluorogenic and fluorescent labeling reagents having a benzofurazan (2,1,3-benzoxadiazole) skeleton such as 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), 4-N,N-dimethylaminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (DBD-F), 4-aminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (ABD-F), ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate (SBD-F), 4-hydrazino-7-nitro-2,1,3-benzoxadiazole (NBD-H), 4-N,N-dimethylaminosulfonyl-7-hydrazino-2,1,3-benzoxadiazole (DBD-H), 4-nitro-7-N-piperazino-2,1,3-benzoxadiazole (NBD-PZ), 4-N,N-dimethylaminosulfonyl-7-N-piperazino-2,1,3-benzoxadiazole (DBD-PZ), 4-(N-chloroformylmethyl-N-methyl)amino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole (DBD-COCl) and 7-N,N-dimethylaminosulfonyl-4-(2,1,3-benzoxadiazolyl) isothiocyanate (DBD-NCS) are reviewed in terms of synthetic method, reactivity, fluorescence characteristics, sensitivity and application to analytes.     

LC-electron capture-APCI(-)-MS determination of nitrobenzoxadiazole derivatives

Nitrobenzoxadiazole (NBD) derivatives are determined with limits of detection ranging down to 20 nmol l(-1) using liquid chromatography-mass spectrometry (LC-MS) with electron capture (EC) ionisation. An atmospheric pressure chemical ionisation (APCI) interface operated in the negative ion mode is used as ionisation source. Amine derivatives of 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBDCl) as well as the isocyanate derivatives of 4-nitro-7-piperazino-2,1,3-nitrobenzoxadiazole (NBDPZ) have been analysed using this technique. The parameters favouring electron capture mechanisms have been investigated thoroughly under consideration of the competing mechanism of deprotonation to allow a better understanding of the electron capture process and to improve selectivity of the analysis.     

Precolumn fluorescence tagging reagent for carboxylic acids in high-performance liquid chromatography: 4-substituted-7-aminoalkylamino-2,1,3-benzoxadiazoles.

Four new 2,1,3-benzoxadiazole amine reagents having different functional groups at the 4- and 7-positions, [4-nitro-7-N-piperazino-2,1,3-benzoxadiazole (NBD-PZ), 4-(N,N-dimethylaminosulphonyl)-7-N-piperazino-2,1,3-benzoxad iazole (DBD-PZ), 4-(N,N-dimethylaminosulphonyl)-7-N-cadaverino-2,1,3-benzoxad iazole (DBD-CD) and ammonium 7-N-piperazino-2,1,3-benzoxadiazole-4-sulphonate (SBD-PZ)] were synthesized as fluorogenic tagging reagents for carboxylic acids in high-performance liquid chromatography. The reagents, except SBD-PZ, reacted with carboxylic acid at room temperature in the presence of activation agents to produce fluorescent adducts. The maximum wavelengths of arachidic acid tagged with DBD-PZ, DBD-CD and NBD-PZ were 569 nm (excitation, 440 nm), 561 nm (excitation, 437 nm) and 541 nm (excitation, 470 nm), respectively. Among various activation agents tested [diethyl phosphorocyanidate (DEPC), diphenyl phosphoroyl azide (DPPA), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)-pyridine, 2.2'-dipyridyl disulphide-triphenylphosphine (Mukaiyama A) and 2-chloro-1-methylpyridinium iodide-triethylamine (Mukaiyama B)], DEPC and Mukaiyama A were more effective than the others. When the piperazino reagents (DBD-PZ and NBD-PZ) were used as the tagging reagents, the derivatization reaction in the presence of Mukaiyama A was faster than that in the presence of DEPC. Although the reaction in the presence of Mukaiyama A was completed after 30 min, an unknown peak derived from the activation agent appeared on the chromatograms. The fluorescence peak intensities were compared in the presence of DEPC. The order of the fluorescence peak areas obtained after reaction for 6 h in the presence of DEPC was DBD-PZ greater than DBD-CD greater than NBD-PZ. Thirteen saturated free fatty acids (FFAs) derivatized with DBD-PZ (or DBD-CD) and DEPC (or Mukaiyama A) in acetonitrile were separated completely by linear gradient elution on a reversed-phase ODS column. Eight drugs (ibuprofen, indomethacin, dinoprost, prostaglandin E1, dehydrocholic acid, ursodesoxycholic acid, hydrocartisone succinate and prednisolone succinate) were also tagged with DBD-PZ in the presence of DEPC and separated by isocratic elution. The detection limits (signal-to-noise ratio = 3) of FFAs tagged with DBD-PZ were in the range 3.2-4.7 fmol, whereas those of drugs were in the range 3.9-14 fmol.     

4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole as chemilumigenic reagent for high performance liquid chromatographic peroxyoxalate chemiluminescence detection

4-(N,N-Dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F), presented as a fluorogenic labelling reagent for amines and amino acids, is preferred for peroxyoxalate chemiluminescence (PO-CL) detection in high performance liquid chromatography. Amino acids and epinephrine derivatized with DBD-F were separated on a reversed phase column and detected at the femtomole level by the PO-CL detection system.     

Development of 7-(N,N-dimethylaminosulfonyl)-5-N-(4-N-aminoethyl)piperazino-2,1,3-benzoxadiazole as a water-soluble fluorogenic reagent for the sensitive liquid chromatographic determination of saturated carboxylic acids

A reversed-phase high-performance liquid chromatographic (HPLC) method for the femtomole determination of nine saturated carboxylic acids, n-butyric (C4), n-hexanoic (C6), n-caprylic (C8), n-decanoic (C10), lauric (C12), n-tetradecanoic (C14), palmitic (C16), stearic (C18) and arachidic (C20), based on the condensation reaction of these acids with a newly synthesized water-soluble benzofurazan fluorescent reagent, 7-(N,N-dimethylaminosulfonyl)-4-N-(4-N-aminoethyl)piperazino-2,1,3-benzoxadiazole (DBD-PZ-NH2), was developed. The derivatization reaction proceeds with 1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide (EDC) in the presence of the catalyst 4-(dimethylamino)pyridine (DMAP). A model derivative of the reagent with n-caprylic acid (C8) was synthesized for fluorescence excitation/emission characterization. Depending on the solvents, including water, methanol, acetonitrile, 1,4-dioxane or N.N-dimethyformamide (DMF), the C8 derivative has a fluorescence emission with a fluorescence quantum yield (phi) ranging from 0.01 to 0.20 in the region from 545 to 580 nm. An exponential increase in phi was observed with increasing acetonitrile content. The calculated detection limits (signal-to-noise ratio = 3:1) of the proposed method for the above nine carboxylic acids were 9.1, 4.0, 2.5, 2.2, 2.0, 1.8, 1.2, 1.0 and 1.3 fmol, respectively. Biological samples including Intralipos 20% and rat plasma were analysed satisfactorily.     

A further study on the combined use of internal standard and isotope-labeled derivatization reagent for expansion of linear dynamic ranges in liquid chromatography-electrospray mass spectrometry

The combined use of a so-called internal standard and the isotope-labeled derivatization reagent for the quantification of analytes for liquid chromatography-mass spectrometry (LC/MS) was further studied. The sample solution (containing the analytes and an internal standard) was derivatized with the light form of the derivatization reagent, 7-(N,N-dimethylaminosulfonyl)-4-(aminoethyl)piperazino-2,1,3-benzoxadiazole (DBD-PZ-NH(2)) or 7-(N,N-dimethylaminosulfonyl)-4-piperazino-2,1,3-benzoxadiazole (DBD-PZ). A standard solution of the analytes (containing an internal standard) was derivatized with the isotope (d(6))-labeled derivatization reagent, DBD-PZ-NH(2) (D) or DBD-PZ (D), and served as the isotope-labeled internal standards. The peak heights of the targeted analytes derivatives in the sample solution were corrected using those of the internal standard and the heavy form derivatives of the standards, and the calibration curves were constructed. The curve bending of the calibration curves caused by the ion suppression at the ion source was suppressed and the linear dynamic ranges of the calibration curves were expanded. The derivatives of DBD-PZ-NH(2) were about 10 times more sensitively detected than those of DBD-PZ derivatives and, therefore, DBD-PZ-NH(2) might be suitable for sensitive detection.     

Determination of the endocannabinoid anandamide in human plasma by high-performance liquid chromatography

Anandamide (N-arachidonylethanolamine) is an endogenous cannabinoid receptor ligand that has been implicated in various physiological and pathophysiological functions. In the present study, a liquid-liquid extraction-based reversed-phase HPLC method with fluorometric detection was validated and applied for the analysis of anandamide in human plasma. Following derivatization with the fluorogenic reagent 4-(N,N-dimethylaminosulfonyl)-7-(N-chloroformylmethyl-N-methyl-amino)-2,1,3-benzoxadiazole (DBD-COCl), the analyte was separated using an acetonitrile-water gradient at a flow rate of 0.8 mL/min, and spectrophotometric detection at 560 nm with an excitation wavelength of 450 nm. The retention times for anandamide and R+-methanandamide (internal standard) were 27.1 and 30.7 min, respectively. The validated quantification range was 1-15 ng/mL. The developed procedure was applied to determine anandamide levels in human plasma following a 24 h incubation of human whole blood at 37 degrees C in the presence or absence of phenylmethylsulfonyl fluoride, an inhibitor of the anandamide-degrading enzyme fatty acid amide hydrolase. Anandamide levels determined under both conditions were within the validated concentration range with anandamide levels being 2.3-fold higher in plasma from PMSF-treated blood.     

First fluorescent photoinduced electron transfer (PET) reagent for hydroperoxides

A novel fluorescent reagent for hydroperoxides, 4-(2-diphenylphosphinoethylamino)-7-nitro-2,1,3-benzoxadiazole (1), was developed on the basis of the method for designing photoinduced electron transfer (PET) reagents having a benzofurazan skeleton. Compound 1 was quantitatively reacted with hydroperoxides to give its fluorescent derivative, 2. In acetonitrile, the Phi value (0.44) of 2 was 31 times greater than that of 1. The long excitation (458 nm) and emission (520 nm) wavelengths of 2 are suitable for the determination of hydroperoxides, especially in biosamples. [structure: see text]     

柱前手性荧光衍生反相高效液相色谱法分离甲状腺素对映体

以R(-)-4-N,N-二甲基磺酰胺-7-(3-异氰酸吡咯烷)-2,1,3-苯并氧杂咪唑（R(-)-DBD-PyNCS）为手性荧光衍生化试剂,成功地拆分了甲状腺素对映体D,L-四碘甲状腺原氨酸（T4）和L-三碘甲状腺原氨酸(T3)。在反应温度为40 ℃、反应时间为20 min时,R(-)-DBD-PyNCS在碱性介质中可与甲状腺素对映体生成稳定的非对映体衍生物。该衍生物在以乙腈-水-醋酸(体积比为60∶40∶1)为流动相,流速为1.0 mL/min,色谱柱为Intersil-ODS-3 C18柱(150 mm×4.6 mm,5 μm)的色谱条件下得到了充分的分离。采用荧光检测器在激发波长460 nm、发射波长550 nm下检测。D,L-T4和L-T3分别在0.016～0.30 μg/μL和0.0067～0.22 μg/μL范围内,峰面积与浓度呈良好的线性关系(r＞0.999)。D,L-T4和L-T3的最低检出限分别为0.02 μg/mL和0.85 μg/mL(S/N=3)。在D-T4、L-T4、L-T3质量浓度分别为0.10 μg/μL下测得峰面积的相对标准偏差分别为3.40%,1.63%,3.30%(n=7)。该方法成功地应用于甲状腺片中T4和T3的含量测定。     

Utilization of 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) for kinetic spectrophotometric assay of befunolol hydrochloride in its pharmaceutical formulation

A simple, accurate, precise, and sensitive kinetic spectrophotometric method for determination of befunolol hydrochloride is described. The method is based on the formation of a colored product with 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) in methanol at 70 degrees C for 45 min. The red-colored product was measured at 523 nm. The optimization of various experimental conditions is described; Beer's law was obeyed in the range 15.25 x 10(-6) to 122.04 x 10(-6) M. The results obtained showed good recoveries (100.1 +/- 0.80%). Application of the proposed method to a pharmaceutical formulation was successfully achieved. The determination of befunolol hydrochloride by fixed time, fixed concentration, and rate constant methods was feasible with the calibration equation obtained. However, the fixed time method proved to be more applicable.     

Use of 4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole as a labelling reagent for peroxyoxalate chemiluminescence detection and its application to the determination of the beta-blocker metoprolol in serum by high-performance liquid chromatography.

Fluorogenic reagents having a benzofurazan moiety, viz., 4-(N,N-dimethylaminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F), 7-fluoro-4-nitro-2,1,3-benzoxadiazole and 4-(aminosulphonyl)-7-fluoro-2,1,3-benzoxadiazole, were compared for the sensitive analysis of their derivatives by high-performance liquid chromatography with peroxyoxalate chemiluminescence detection. Of the proline derivatives, DBD-proline was the most sensitive with a detection limit of 2 fmol. The optimum concentrations of bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate and H2O2 for the post-column reaction were 0.5 and 75 mmol dm-3 respectively and amino acids and beta-blockers derivatized with DBD-F were detected in the range 0.2-40 fmol (signal-to-noise ratio = 3) using the proposed method. The lower detection limit of metoprolol (a beta-blocker having an isopropylamino group) spiked in serum was 0.8 ng ml-1 using 20 microl of serum (signal-to-noise ratio = 5).     

High-performance liquid chromatographic assay of N(G)-monomethyl-L-arginine, N(G),N(G)-dimethyl-L-arginine, and N(G),N(G)'-dimethyl-L-arginine using 4-fluoro-7-nitro-2, 1,3-benzoxadiazole as a fluorescent reagent

N(G)-Monomethyl-L-arginine (L-NMMA), N(G),N(G)-dimethyl-L-arginine (ADMA), and N(G),N(G)'-dimethyl-L-arginine (SDMA) are emerging cardiovascular risk factors. A high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of L-NMMA, ADMA and SDMA is described. The assay employed 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as a fluorescent derivatization reagent. After solid phase extraction with cation-exchange column, the methylated arginines were converted to fluorescent derivatives with NBD-F, and the derivatives were separated within 32 min on a reversed-phase column. Nomega-Propyl-L-arginine was Used as an internal standard. Extrapolated detection limits were 12 nM (12 fmol per injection) for L-NMMA and 20 nM (20 fmol per injection) for ADMA and SDMA, respectively, with a signal-to-noise ratio of 3. The calibration curves for L-NMMA, ADMA and SDMA were linear within the range of 50-5000 fmol. The method was applied to the quantitative determination of L-NMMA, ADMA and SDMA in 200 microl of rat plasma. The concentrations of L-NMMA, ADMA and SDMA in rat plasma were 0.16 +/- 0.03, 0.80 +/- 0.25 and 0.40 +/- 0.21 microM, respectively (n = 5).     

Synthesis and crystal structure of a luminescent metal-organic framework based on 4,7-(4-carboxyphenyl)-2,1,3-benzoxadiazole

Russian Chemical Bulletin - A three-dimensional coordination polymer was synthesized by the reaction of zinc(ii) nitrate with 4,7-(4-carboxyphenyl)-2,1,3-benzoxadiazole and...