Factorial discriminant analysis of occupational exposure in metallurgy using INAA of hair samples

A multivariate statistical technique-factoral discriminant analysis (FDA)-has been used to evaluate the occupational esposure of a group of metallurgy workers using the elemental composition of their scalp hair, as compared with a control group. The initial variables were the concentrations of ten minor and trace elements Al, Co, Cu, Fe, Mg, Mn, Sb, Se, V, and Zn determined in hair samples by using instrumental neutron activation analysis (INAA). A good discrimination between exposed and control subjects has been achieved after the normalization of the data (by log-transforming the initial variables) and considering sex-matched groups. To measure the accuracy of the classification and the predictive ability a cross-validation procedure was used.     

Trace elements in head hair of hemodialysis patients

Instrumental neutron activation analysis /INAA/ was applied to measure trace elements in head hair of 19 patients with impaired renal function /14 males and 5 females/ and of 40 normal individuals /20 males and 20 females/. It was the aim to use head hair as a possible indicator of total body trace elements status and to investigate whether significant changes occur as a result of chronic hemodialysis. The elemental concentrations of 20 elements /i.e. Na, Mg, Al, Cl, K, Ca, V, Mn, Fe, Co, Cu, Zn, As, Se, Br, Ag, Cd, Sb, I and Au/ are presented and compared with published data. The present study revealed that the hair of the dialysis patients contained about ten times more iodine than that of the control group. No significant differences were observed for the other elements measured, except for sodium and antimony.     

Instrumental neutron activation analysis of brewer's yeast

Instrumental neutron activation was used for the determination of 23 trace and minor elements in 4 different samples of brewer's yeast. Detection limits for these elements vary from 2 ppb to 100 ppm. The following average concentrations were found (ppm, dry weight): Al 597, Br 0.36, Cl 1473, Co 0.21, Cu 19, Fe 285, K 16 400, Mg 1355, Mn 8.4, Na 2330, Rb 19, Sb 0.053, Se 1.2, V 2.2 and Zn 80. NBS standard 1569 was also analyzed and the following concentrations (in ppm) were measured: Al 2300, Br 0.65, Ce 0.23, Cl 460, Co 0.26, Cr 2.12, Cu 11, Fe 707, Gd 7.1, Hf 0.13, K 15 500, Mg 1780, Mn 7, Na 510, Rb 16, Sb 0.075, Sc 0.18, Se 0.92, Th 3.7, Ti 38, U 0.49, V 4.1 and Zn 70.     

Radioactivation analysis of hair a means of biological monitoring of the environment

With the aim of indicating environmental pollution effects by heavy metals on humans using hair, nondestructive activation analysis was applied to 382 normal Japanese hair samples (background level). Elemental contents of hair could be determined for Ag, Al, As, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, La, Mg, Mn, Na, S, Sb, Sc, Se, Sm, Ti, V and Zn. As these elements in hair have wide concentration ranges, the differences in concentrations distribution between groups (sex, age, permanent treatment and regional difference) are discussed. A method for hair sampling is presented.     

Determination of trace elements in scalp hair of an elderly population by neutron activation analysis

Neutron activation analysis was applied to assess trace elements concentrations in head hair from healthy elderly people living in the São Paulo metropolitan area. Concentrations of As, Br, Ca, Cl, Co, Cr, Cu, Fe, K, La, Mn, Na, Sb, Se and, Zn were determined. Comparisons were made between the results obtained for dyed and non-dyed hair as well as for hair from females and males of two different age groups. The results were also compared with range values established by clinical laboratories and published data.     

高纯钛的辉光放电质谱法多元素分析

采用辉光放电质谱法(GD-MS)测定高纯钛中Mg、Al、Cr、Fe、V、Mn、Co、Ni、Cu、Zn、As、Sn、Sb、Ta、W、Pb、Bi等痕量杂质元素,并对GD-MS工作参数及条件进行了优化。主要元素与内标校正ICP-MS法定量分析的结果一致,对结果差异的原因进行分析,论述了Element GD辉光放电质谱仪在痕量杂质元素分析方面的优势。     

Assessment of metal contamination in an urban drainage system (using water and tilapia, Oreochromis spp.) in view of human health effect. A case study of some selected communities in Cape Coast township in Ghana

This research work aimed at studying the metal content of water and tilapia fish sample, Oreochromis spp., from a wastewater-fed pond around the University of Cape Coast community using instrumental neutron activation analysis. The metals studied were Al, As, Ca, Co, Cr, Cu, Fe, K, Mg, Mn, Na, V and Zn. In the water samples the order of elemental concentrations at sampling point 1, in ??g/g, was K (75.96?±?0.92), Na (18.52?±?0.35), Al (6.00?±?0.89), Mn (3.28?±?0.44), As (3.08?±?0.40), Mg (1.56?±?0.17), Ca (0.70?±?0.08), Cu (0.54?±?0.08) and V (0.04?±?0.01). Co, Cr, Fe and Zn were below detection limits of INAA. The order of elemental concentrations in the water at point 2 was as follows: Na (4.99?±?0.14), K (4.82?±?0.89), Mn (4.40?±?0.53), Mg (2.92?±?0.37), Al (1.98?±?0.21), As (0.69?±?0.10), Ca (0.24?±?0.07) and V (0.23?±?0.06) with Co, Cr, Cu, Fe and Zn falling below the detection limit of INAA. The concentrations recorded for Al, As, Cu and Mn in the water samples were all above WHO permissible limits. The mean levels of heavy metals in the soft tissue of tilapia was of the order: K?>?Mg?>?Fe?>?Ca?>?Na?>?Al?>?Mn?>?Zn?>?V?>?Cu?>?Cr?>?Co. Arsenic was below detection limit. The transfer factor values calculated for the metals Al, Ca, K, Mg, Mn, Na and V were all greater than one indicating movement of metals from the water column to the tilapia species. The hazard index (HI) calculated for Al, Fe, Mn and V suggested possible occurrence of adverse health effects (HI?>?1) where as the HI value obtained for Cr, Cu and Zn (i.e., HI?<?1) suggested unlikely adverse effects occurring.     

Determination of 24 elements in four algae reference materials by neutron activation analysis and inductively coupled plasma mass spectrometry

Four algae reference materials, IAEA-391, 392, 393 and IAEA-140, prepared by the International Atomic Energy Agency for intercomparison under different preparation conditions were analyzed for 24 elements. Conventional neutron activation analysis (NAA) was used to determine Al, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Sb, V and Zn and epithermal NAA using BN and Cd as shielding material for I, Br, As, Ni, Mo and Cd. Inductively coupled plasma mass spectrometry (ICP-MS) as a complementary and comparative method was applied to determine Pb, Sn, Ni, Sr, Rb, As, Co, Cr, Cu, Mn, V, Mo and Zn. Two analytical quality control standard reference materials IAEA-V-10 (hay powder) and IAEA-331 (spinach) were analyzed simultaneously with real samples. The results agree quite well with each other and with the certified values.     

An indirect study of air pollution by neutron activation analysis of snow

Al, As, Br, Cd, Ce, Cl, Co, Cs, Cu, Fe, Hg, K, La, Mg, Mn, Mo, Na, Sb, Sc, Sr, Ti, V and Zn were determined in the soluble and insoluble fractions of snow which was collected at 6 differents sites in the Montreal area. From these data the variability coefficients and the enrichment factors were calculated and the probable sources of each element are discussed. The overall concentrations found in the snow were compared with the concentrations of these elements in the air sampled in the same area by high volume samplers. From these, the snow-out ratios for Cr, Cu, Fe, Mn, V and Zn and their mean were calculated. They are equal to 3338, 3389, 2322, 526, 563, 2603 and 2913 m³/kg respectively.     

Trace element content of some Polish hard and brown coals

Instrumental neutron activation analysis /INAA/ method was applied to measure major, minor and trace elements in 34 samples of hard and brown coal originating from eight Polish coal mines. The elemental concentrations of 38 elements /Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Rb, Sr, Mo, Ag, Cd, In, Sb, I, Cs, Ba, La, Ce, Sm, Eu, Lu, W, Au and Th/ are presented and compared with published data for coals from various origin. Enrichment factors, calculated relative to iron and the average crustal rock composition, indicated that several elements are highly enriched in Polish coals.     

Major elements as possible factors of trace element urban pedochemical anomalies

The relationship between real total contents of the major elements Na, Mg, Al, Si, P, S, K, Ca, Ti, Fe and the trace elements Ag, As, B, Ba, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sn, V, U, Zn in topsoil from the central part of Vilnius is analysed. The amounts of most elements were determined by energy-dispersive X-ray fluorescence, while amounts of Ag, B, Co were measured by optical atomic emission spectrophotometry. Two factors were distinguished according to major elements: anthropogenic (A) including Ca, Mg, Fe, P, S and clayey (C) including K, Al, Ti. Boron, Mn, Cr and U are significantly correlated with members of both factors, Sb with none of them and other trace elements either with all (Cu, Zn, Pb, Se, Ba, Ni, Co) or with separate (V, Ag, Sn, Mo, As) members of the A-factor. Only B, Mn, Cr, U (partly their additive index Z1) are influenced by the C-factor, while twelve other trace elements (also their additive index Z2) are influenced by the A-factor. The additive index Z of all 17 elements is also affected by the A-factor. Four groups of sites have been distinguished according to normal or higher contents of both factors. The majority of trace element anomalies are related to the sites affected by the A-factor.     

Determination of trace element levels in polyethylene by instrumental neutron activation analysis

Elements Al, As, Au, Br, Cl, Co, Cr, Cu, Fe, Hg, K, La, Mn, Mo, Na, Sb, Sc, Sm, V, and Zn were determined by INAA in several brands and batches of high pressure polyethylene (PE) Bralen (Slovnaft Bratislava, Czechoslovakia). A large scatter of trace element contents was found in both granules and foils, indicating an inhomogeneous distribution for the majority of the above mentioned elements present as impurities in PE. Larger amounts of the elements Al, Mn, and Sb were found in foils than in granules. Blank values resulting from using of PE Bralen as a canning material for INAA were compared to trace element concentration in human hair samples, too.     

Study of hair element content from an urban Bulgarian population using NAA assessment of environmental status

In this preliminary study, scalp hair samples from 36 individuals resident in Sofia, Bulgaria, were analysed and Ag, Al, As, Au, Ba, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, F, Fe, Hg, I, K, La, Mg, Mn, Mo, Na, Ni, Rb, S, Sb, Sc, Se, Sn, Sr, Ti, V, W, and Zn were determined. Instrumental neutron activation analysis (INAA) methods were used. Three washing procedures.: distilled-deionised water; acidacetone-water; and Triton X-100 detergent-water, showed a variable elemental change strongly dependent on the procedure used. More than 18 elements (Al, As, Ba, Ca, Ce, Cl, Co, Cs, F, Fe, I, K, La, Mo, Na, Ni, Sb, Sc, Sr and V) were easily removed by water-washing. Triton X-100 detergent was more effective in removing Ag, As, Au, Cl, Cs, K, Na and Rb; but not Hg. Only S and Zn were strongly incorporated in the hair structure (less than 10% being removable by any washing technique). There is no significant age correlation with any element between the various hair treatment groups. Elevated cadmium levels were found in the hair of smokers (0.711–4.913 g/g Cd) compared with nonsmokers (0.568–2.681 g/g Cd). Comparison of the elemental data for distilled water-washed hair and studies from Oxford, England and Hastings, and Hastings, New Zealand (using the same INAA method) revealed interesting variations dependent on local industrial and nutritional factors.     

Determination of 21 elements by INAA for certification of SRM 1570a,Spinach

Analyses for certification have been made by instrumental neutron activation analysis (INAA) for the determination of 21 elements in the National Institute of Standards and Technology (NIST) Spinach renewal reference material, SRM 1570a. Elements determined included ones with short halflife products (Al, V, Ca, Mg), intermediate halflife products (Mn, Na, K, La), and long halflife products (Ba, Co, Cr, Cs, Eu, Fe, Rb, Sb, Sc, Se, Sr, Th, and Zn). For the first time a new robotic sample changer was used in the counting of long halflife indicator isotopes for certification of an SRM. Uncertainties obtained averaged±1.80% for the four major and minor constituents (Ca, K, Mg, Na); ±3.14% for elements with concentrations from 1 to 400 mg/kg (Al, Ba, Cr, Fe, Mn, Rb, Sr, and Zn); and±8.31% for the ultra trace elements (<1 mg/kg) (Co, Cs, Eu, La, Sb, Sc, Se, Th, and V).     

Grundlagen zur halbquantitativen Bestimmung von zwanzig Elementen in der Lasermikrospektralanalyse

Zusammenfassung Für die folgenden 20 Elemente wurden die Grundlagen für eine halbquantitative Konzentrationsbestimmung mit Hilfe des Laser-Mikrospektralanalysators ermittelt, und zwar differenziert für Untersuchungen an oxidischen und an metallischen Materialien: Mg, Al, Si, Cr, Mn, Co, Ni, Cu, Zn, Ga, Ge, Pd, Ag, Cd, In, Sn, Sb, Pb, Bi, Fe bzw. Au.

---

Principles of semi-quantitative determination of 20 elements by laser-microspectroscopy

The principles for the determination of the following 20 elements by Laser-microspectroscopy have been investigated separately for oxidic and metallic materials: Mg, Al, Si, Cr, Mn, Co, Ni, Cu, Zn, Ga, Ge, Pd, Ag, Cd, In, Sn, Sb, Pb, Bi, Fe resp. Au.

     

Determination of impurities in nuclear fuel element components by neutron activation analysis

Neutron activation analysis methods for the determination of impurities in zirconium cladding material and uranium oxide are described. Detection limits for the elements Al, Cd, Cr, Co, Cu, Hf, Fe, Mn, Ni, W and U in zirconium are below that required by the ASTM B 352-79 standard. The method has been tested on the NIST SRM 360a Zircaloy-2 from which the elements Na, Mg, Al, Ca, V, Cr, Fe, Co, Ni, Cu, Eu and U have been detected. The values for Cr, Fe, Ni and Cu are compared with the certified values. A method for the pre-irradiation separation of the elements Mg, Na, Al, K, Sc, Ca, V, Mn, Cr, Fe, Co, Cu, Zn, Rb, Zr, Cd, Cs, REE and Hf from uranium has been developed. A neutron activation analysis method for the determination of those elements in uranium is described. The method is tested by the analysis of the IAEA reference sample SR-54/64. The elements Al, Mn, V, Cu, Cr, Co, Ni and Fe have been detected and the results compared with the certified values.     

A trace element study of commercial infant milk and cereal formulas

Three commercial infant milk formulas, one commercial infant cereal formula and one locally grown cereal used for infant feeding in Nigeria were analyzed for 17 trace elements, viz: Al, As, Br, Ca, Ce, Cl, Co, Cr, Fe, K, Mg, Mn, Na, Rb, Sb, Se and Zn. The commercial milk formulas contain adequate amounts of Ca, Cl, Co, Fe, K, Mg, Mn, Na and Zn, the locally grown cereal contains adequate amounts of Co, K, Mg, Mn and Zn and low in Ca, Cl, Fe and Na while the commercial cereal has adequate amounts of Ca, Cl, Co, K, Mg, Na and Zn. None of the samples analyzed was found to contain any elements up to threshold toxicity limits of concentrations.     

Assessment of elemental contamination in road dust using EDXRF

Road dust samples were collected in different locations of heavy traffic, medium traffic, express way and industrial areas of Mumbai. The concentrations of various elements (Mg, Al, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn and Pb) in road dust samples were analyzed using EDXRF. The average elemental profile of road dust in Mumbai was comparable with studies carried out in other countries with slight variations. The estimated geo accumulation indices and enrichment factors indicated moderate elemental contamination and enrichment of anthropogenic elements in road dust samples. Factor analysis of elemental data resolved four sources namely crustal, tyre wear, vehicular/industrial emissions and break wear.     

Determination of 19 elements in mineral waters by coprecipitation with PbS and by neutron activation analysis

Concentrations of Ag, Al, Ba, Br, Cl, Cu, I, In, K, La, Mg, Mn, Na, Sb, Sn, Sr, U, V and Zn were determined in 34 samples of mineral waters from Canada and from 9 other countries. The concentrations of elements which were frequently determined ranged (in ppb): Ag 0.1–6, Al 3–173, Cu 2–137, La 0.04–10, Mg 9–1140, Mn 0.1–99, Sb 1–50, V 0.01–2.6 and Zn 3–613.     

Determination of trace elements of some Egyptian crops by instrumental neutron activation,inductively coupled plasma-atomic emission spectrometric and flameless atomic absorption spectrophotometric analysis

Instrumental neutron activation analysis was used for the determination of Al, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Ti, Th, V and Zn, ICP-AES for the determination Al, Ag, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, P, Sc, Sr, Ti, V and Zn and flameless AAS for the determination of Cd, Hg and Pb in egg plant, potatoes, green pepper (Leguminosae), vegetable marrow (Cucurbitaceae), pears, apple (Rosaceae), castor oil plant (Euphorbiaceae), lettuce (compositae), dill, parsley, coriander (Umbelliferae), and in some soil samples collected from Aswan province.