High-resolution angle-resolved photoemission study of Ni(1 1 1) surface state

High-resolution angle-resolved photoemission spectroscopy (ARPES) has been conducted to study the Shockley state (SS) in ferromagnetic Ni(1 1 1) located at the point of the surface Brillouin zone. We have determined the Fermi wave vector and Fermi energy of the state with excitation photon energies of hν = 6.9-27.5 eV. On the basis of ARPES spectral shape analyses, we have found significant electron-electron interaction in the SS.     

The electronic structure and reactivity of the oxygen-modified Mo2C(0 0 0 1) surface

Oxygen adsorption on Mo₂C(0 0 0 1) has been investigated with angle-resolved photoemission spectroscopy (ARPES). When the surface is reacted with O₂, the O 2p-induced states are formed at 4.1 and 5.3 eV at the point. The emissions around the Fermi level are also intensified by oxygen adsorption, which is due to the formation of a partially filled state. It is found that the reactivity of the surface toward H₂O adsorption is much enhanced by pre-adsorption of oxygen. The reactivity is found to be maximized at θ_O ∼ 0.2.     

Electronic structure of the Sb-induced Si(1 1 3)2 × 5 surface

The surface electronic structure of Sb/Si(1 1 3)2 × 5 was investigated by angle-resolved photoemission spectroscopy experiments. This reveals Sb/Si(1 1 3)2 × 5 to have three surface bands with anisotropic two-dimensional characteristics. The band widths of the surface bands along is larger than along . The number of surface bands of Sb/Si(1 1 3)2 × 5 and their band dispersions along and are quite analogous with those of Sb/Si(1 1 3)2 × 2 composed of Sb adatom and Si tetramer chains. The electronic structure analogy suggests that Sb/Si(1 1 3)2 × 5 and Sb/Si(1 1 3)2 × 2 have common building blocks such as Sb adatom and Si tetramer chains.     

ARPES measurements on Si(1 1 1) hole subband induced by Pb and Ga adsorption

The subband dispersions in the Si(1 1 1) p-type inversion layers induced by Pb and Ga adsorbed surface structures were measured by angle-resolved photoemission spectroscopy (ARPES). The surface structures used here were and Si(1 1 1)6.3 × 6.3-Ga. is a new surface phase found in this study. Because it is significant in our study to investigate potential effects of surface superstructures on the hole subband dispersion, we investigated the subband energy levels quantitatively comparing them with those calculated using the triangular approximation. It was found that the energy separation of the adjacent subband quantum levels in the inversion layers induced by gallium adsorption does not follow the triangular approximation. The possible band bending shape was proposed to explain the quantum level spacing of the subbands in Ga-induced inversion layers.     

Surface phase diagram and temperature induced phase transitions of Sn/Cu(1 0 0)

Room temperature deposition of Sn on Cu(1 0 0) gives rise to a rich variety of surface reconstructions in the submonolayer coverage range. In this work, we report a detailed investigation on the phases appearing and their temperature stability range by using low-energy electron diffraction and surface X-ray diffraction. Previously reported reconstructions in the submonolayer range are p(2 × 2) (for 0.2 ML), p(2 × 6) (for 0.33 ML), ()R45° (for 0.5 ML), and c(4 × 4) (for 0.65 ML). We find a new phase with a structure for a coverage of 0.45 ML. Furthermore, we analyze the temperature stability of all phases. We find that two phases exhibit a temperature induced reversible phase transition: the ()R45° phase becomes ()R45° phase above 360 K, and the new phase becomes p(2 × 2) also above 360 K. The origin of these two-phase transitions is discussed.     

Sapphire (0 0 0 1) surface modifications induced by long-pulse 1054 nm laser irradiation

We have investigated modifications of sapphire (0 0 0 1) surface with and without coating, induced by a single laser pulse with a 1054 nm wavelength, 2.2 s duration, 7.75 mm spot and energy of 20-110 J. A holographic optical element was used for smoothing the drive beam spatially, but it induced small hotspots which initiated damage on the uncoated and coated surfaces. The individual damage effects of hotspots became less pronounced at high fluences. Due to high temperature and elevated non-hydrostatic stresses upon laser irradiation, damage occurred as fracture, spallation, basal and rhombohedral twinning, melting, vitrification, the formation of nanocrystalline phases, and solid-solid phase transition. The extent of damage increased with laser fluences. The formation of regular linear patterns with three-fold symmetry ( directions) upon fracture was due to rhombohedral twinning. Nanocrystalline -Al₂O₃ formed possibly from vapor deposition on the coated surface and manifested linear, triangular and spiral growth patterns. Glass and minor amounts of -Al₂O₃ also formed from rapid quenching of the melt on this side. The - to -Al₂O₃ transition was observed on the uncoated surface in some partially spalled alumina, presumably caused by shearing. The nominal threshold for laser-induced damage is about 47 J cm⁻² for these laser pulses, and it is about 94 J cm⁻² at the hotspots.     

The local adsorption geometry and electronic structure of alanine on Cu{1 1 0}

The adsorption of alanine on Cu{1 1 0} was studied by a combination of near edge X-ray absorption fine structure (NEXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). Large chemical shifts in the C 1s, N 1s, and O 1s XP spectra were found between the alanine multilayer and the chemisorbed and pseudo-(3 × 2) alaninate layers. From C, N, and O K-shell NEXAFS spectra the tilt angles of the carboxylate group (≈26° in plane with respect to and ≈45° out of plane) and the C-N bond angle with respect to could be determined for the pseudo-(3 × 2) overlayer. Using this information three adsorption geometries could be eliminated from five p(3 × 2) structures which lead to almost identical heats of adsorption in the DFT calculations between 1.40 and 1.47 eV/molecule. Due to the small energy difference between the remaining two structures it is not unlikely that these coexist on the surface at room temperature.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Aromatic interactions in the close packing of phenyl-imides at Cu(1 1 0) surfaces

The oxidation of aniline at Cu(1 1 0) surfaces at 290 K has been studied by XPS and STM. A single chemisorbed product, assigned to a phenyl imide (C₆H₅N(a)), is formed together with water which desorbs. Reaction with preadsorbed oxygen results in a maximum surface concentration of phenyl imide of 2.8 × 10¹⁴ mol cm⁻² and a surface dominated by domains of three structures described by , and unit meshes. However, concentrations of phenyl imide of up to 3.3 × 10¹⁴ mol cm⁻² were obtained from the coadsorption of aniline and dioxygen (300:1 mixture) resulting in a highly ordered biphasic structure with and domains. Comparison of the STM and XPS data shows that only half the phenyl imides at the surface are imaged. Pi-stacking of the phenyl rings is proposed to account for this observation.     

STM study of l-serine adsorption on Cu(0 0 1)

The adsorption of l-serine on Cu(0 0 1) surface at 310 K was studied by scanning tunneling microscope (STM). l-serine molecules on the Cu(0 0 1) initially formed a domain of thick lines with a order structure along the direction on the terraces regardless of the coverage of serine. The thick lines were partly replaced by thin line along the direction, and completely disappeared in 2 h. It is considered that in these structures hydrogen bonds involved in hydroxymethyl group between adsorbates play some role in addition to intermolecular hydrogen bond between a hydrogen atom of amino group and an oxygen atom of carboxy group for alanine adsorption.     

Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

Spectroscopic characterization of the potential energy functions of Ne2 Rydberg states in the vicinity of the Ne(S0) + Ne(4p′) dissociation limits

The gerade autoionizing Rydberg states of Ne₂ have been studied in the range 162 000-172 000 cm⁻¹ by 1 + 1′ resonant two-photon excitation from the Ne₂ X ground state via different vibrational levels of the Ne₂ C state. A rotationally resolved part of the spectrum allowed the determination of the potential energy functions of two states of 1_g and characters in the vicinity of the Ne(2p⁶¹S₀) + Ne (2p⁵4p′) dissociation limit. The presence of maxima in these potential energy functions is interpreted as originating from a repulsive interaction between the Rydberg electron and the neutral atom.     

Electronic structure and surface reconstruction of adsorbed oxygen on copper(0 0 1)

The electronic structure of the c(2 × 2) and the missing row phases of chemisorbed O on Cu(0 0 1) at a coverage of 0.5 monolayers has been calculated using a full-potential semi-infinite embedding technique. Calculations are made over a range of Cu-O layer spacings, and from the change in the work function, the effective charge on O is obtained. The effective charge is the same for both phases of the O/Cu(0 0 1) surface with a value of −0.3|e| on O, and consequently too small to drive any surface instability. The angular momentum-resolved density of states and energy-resolved charge densities are used to describe the binding and the spatial electronic overlap at the surfaces. In the reconstructed phase the O and the surface Cu atoms undergo displacements, which optimises the bonding.     

Atomic structure of thin dysprosium-silicide layers on Si(1 1 1)

We report on scanning tunneling microscopy results of thin dysprosium-silicide layers formed on Si(1 1 1). In the submonolayer regime, both a and a 5 × 2 superstructure were found. Based on images taken at different tunneling conditions, a structure model could be developed for the superstructure. For one monolayer, a 1 × 1 superstructure based on hexagonal DySi₂ was observed, while several monolayers thick films are characterized by a superstructure from Dy₃Si₅.     

Electronic structure of oxidized SiC(0 0 0 1) studied by inverse photoemission spectroscopy

Starting from the silicon rich (3 × 3) reconstruction of SiC(0 0 0 1) we prepared oxidized surfaces by hydrogen etching as well as by exposure to molecular oxygen. LEED pictures show a (1 × 1)-reconstructed surface with a faint structure being more pronounced for the hydrogen-etched surfaces. Auger spectra reveal a distinct change in the shape of the Si_LVV peak indicating the existence of Si-O bonds on the surface. Inverse photoemission (IPE) is employed to study the electronic structure above the Fermi level of the oxidized samples. On the hydrogen-etched surface difference spectra reveal a surface feature at 1 eV above the Fermi level that presumably originates from an isolated dangling bond on ordered patches of the oxidized surface.     

Adsorption structure of germanium on the Ru(0 0 0 1) surface

Coverage-dependent adsorption energy of the Ge/Ru(0 0 0 1) growth system and the geometrical distortions of the most stable adsorption structure are investigated through first-principles calculations within density functional theory. A local minimum in adsorption energy is found to be at a Ge coverage of 1/7 monolayer with a Ru(0 0 0 1)- symmetry. Based on this stale superstructure, the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) images are simulated by means of surface local-density of states (LDOS). The results are consistent well with the STM measurements on the phase for Ge overlayer on Ru(0 0 0 1). From this stimulation, the relations between the STM images and the lattice distortion are also clarified.     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.     

The v6 = 1 and v6 = 2 vibrational states of DCF3

The high-resolution infrared spectra of DCF₃ were reinvestigated in the ν₆ fundamental band region near 500 cm⁻¹ and around 1000 cm⁻¹ with the aim to assign and analyze the overtone level of the asymmetric CF₃ bending vibration v₆ = 2.The present paper reports on the first study of both its sublevels (A₁ and E corresponding to l = 0 and ±2, respectively) through the high-resolution analysis of the overtone band and the hot and bands.The well-known “loop method”, applied to and , yielded ground state energy differences Δ(K, J) = E₀(K, J) − E₀(K − 3,J) for the range of K = 6 to 30.In the final fitting of molecular parameters, we used the strategy of fitting all upper state data together with the ground state rotational transitions.This is equivalent to that calculating separately the and coefficients of the K-dependent part of the ground state energy terms from the combination loops.All rotational constants of the ground state up to sextic order could be refined in the calculation.This led to a very accurate determination of C₀ = 0.18924413(25) cm⁻¹, , and also .In the course of analyzing simultaneously the overtone band together with the and ν₆ bands, the original assignment of the fundamental ν₆ band [Bürger et al., J. Mol. Spectrosc. 182 (1997) 34-49] was found to be incompatible with the present one. Assignments of the (k + 1, l₆ = +1)/(k − 1,l₆ = −1) levels had to be interchanged, which changed the value of Cζ₆ = −0.14198768(26) cm⁻¹ and the sign of the combination of constants C − B − Cζ in the v₆ = 1 level to a negative value.