Synthesis of micro-sized titanium dioxide nanosheets wholly exposed with high-energy {001} and {100} facets

A new synthetic strategy was developed to prepare large-sized well-defined anatase TiO(2) nanosheets wholly dominated with thermodynamically unfavorable high-reactive {001} and {100} facets, which has a percentage of 98.7% and 1.3%, respectively. The as-prepared anatase TiO(2) nanosheets show a well-faceted morphology and have a large size in length (ca. 4.14 μm). The formation mechanism of the anatase TiO(2) nanosheets was also analyzed and investigated.     

Hierarchical TiO2 nanospheres with dominant {001} facets: facile synthesis, growth mechanism, and photocatalytic activity

Hierarchical TiO(2) nanospheres with controlled surface morphologies and dominant {001} facets were directly synthesized from Ti powder by a facile, one-pot, hydrothermal method. The obtained hierarchical TiO(2) nanospheres have a uniform size of 400-500?nm and remarkable 78?% fraction of {001} facets. The influence of the reaction temperature, amount of HF, and reaction time on the morphology and the exposed facets was systematically studied. A possible growth mechanism speculates that Ti powder first dissolves in HF solution, and then flowerlike TiO(2) nanostructures are formed by assembly of TiO(2) nanocrystals. Because of the high concentration of HF in the early stage, these TiO(2) nanostructures were etched, and hollow structures formed on the surface. After the F(-) ions were effectively absorbed on the crystal surfaces, {001} facets appear and grow steadily. At the same time, the {101} facets also grow and meet the {101} facets from adjacent truncated tetragonal pyramids, causing coalescence of these facets and formation of nanospheres with dominant {001} facets. With further extension of the reaction time, single-crystal {001} facets of hierarchical TiO(2) nanospheres are dissolved and TiO(2) nanospheres with dominant {101} facets are obtained. The photocatalytic activities of the hierarchical TiO(2) nanospheres were evaluated and found to be closely related to the exposed {001} facets. Owing to the special hierarchical architecture and high percentage of exposed {001} facets, the TiO(2) nanospheres exhibit much enhanced photocatalytic efficiency (almost fourfold) compared to P25 TiO(2) as a benchmark material. This study provides new insight into crystal-facet engineering of anatase TiO(2) nanostructures with high percentage of {001} facets as well as opportunities for controllable synthesis of 3D hierarchical nanostructures.     

Facile fabrication of anatase TiO2 microspheres on solid substrates and surface crystal facet transformation from {001} to {101}

Anatase TiO(2) microspheres with controlled surface morphologies and exposed crystal facets were directly synthesized on metal titanium foil substrates by means of a facile, one-pot hydrothermal method without use of any templating reagent. The obtained products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelecron spectroscopy (XPS), and the focused ion beam (FIB) technique. The sizes of the resultant microspheres ranged from 1.1 to 2.1 μm. The transformation of anatase TiO(2) microspheres with exposed {001} facets surface to nanosheets surface with {101} facets was achieved by simply controlling the hydrothermal reaction time. The anatase TiO(2) microspheres with exposed square-shaped plane {001} facets were obtained by controlling the reaction time at 1 h. The prolonged reaction time transforms the anatase TiO(2) microspheres with exposed square-shaped plane {001} facets to eroded {001} facets then to a nanosheet surface with exposed {101} facets. With hydrothermal synthesis, the surface morphological structure and crystal facets formation are highly dependent on dissolution/deposition processes, which can be strongly influenced by attributes, such as pH of the reaction media, the total concentration of dissolved and suspended titanium species, and the concentration of fluoride in the reaction solution. The changes of these attributes during the hydrothermal process were therefore measured and used to illustrate the morphology and crystal-facet transformation processes of anatase TiO(2) microspheres. The surface morphologies and crystal-facet transformations during hydrothermal processes were found to be governed by the compositional changes of the reaction media, driven by dynamically shifted dissolution/deposition equilibria. The photocatalytic activities of the photoanodes made of anatase TiO(2) microspheres were evaluated. The experimental results demonstrated that the photocatalytic activity of anatase TiO(2) microspheres with exposed {001} facets was found to be 1.5 times higher than that of the anatase TiO(2) microspheres with exposed {101} facets.     

Hierarchical TiO2 microspheres: synergetic effect of {001} and {101} facets for enhanced photocatalytic activity

Well-faceted nanocrystals of anatase TiO(2) with specific reactive facets have attracted extraordinary research interest due to their many intrinsic shape-dependent properties. In this work, hierarchical TiO(2) microspheres consisting of anatase nanosheets or decahedrons were synthesized by means of a facile hydrothermal technique; meanwhile, the percentage of {001} facets can be tuned from 82 to 45%. Importantly, by investigating the photo-oxidation reactions for ˙OH radical generation and photoreduction reactions for hydrogen evolution, the TiO(2) microspheres consisting of nano-decahedrons with 45% {001} facets show superior photoreactivity (more than 4.8-times) compared to the nanosheets with 82% {001} facets. By analyzing the results of scanning electron microscopy (SEM), photoluminescence (PL) and first-principles density functional theory (DFT) calculations, a model of charge separation between the well-formed {001} and {101} facets is proposed, and the enhanced photocatalytic efficiency is largely attributed to the efficient separation of photogenerated charges among the crystal facets co-exposed.     

Microwave-induced synthesis of porous single-crystal-like TiO2 with excellent lithium storage properties

Porous anatase TiO(2) single crystal architectures with large specific surface area and remarkable crystalline phase-stability were fabricated via a green microwave-assisted process. Ionic liquid was chosen as both an essential structure-directing agent for the formation of the {001} facets exposed TiO(2) and an etching agent source for selective erosion of the exposed {001} facets, leading to robust porous framework with exposed {101} facets. These porous anatase single crystals were thermally stable up to 800 °C, indicating excellent structure stability. The product showed stable cyclability at high current rate, better reversibility, and high Coulumbic efficiency of 100% for lithium storage.     

Nitrogen self-doped nanosized TiO2 sheets with exposed {001} facets for enhanced visible-light photocatalytic activity

Nitrogen self-doped TiO(2) nanosheets with exposed {001} facets (ca. 67%) were synthesized by solvothermal treatment of TiN in a HNO(3)-HF ethanol solution and exhibited much higher visible-light photocatalytic H(2)-production activity than nitrogen doped TiO(2) microcrystallites with exposed {001} facets (ca. 60%) by a factor of 4.1.     

A selective etching phenomenon on {001} faceted anatase titanium dioxide single crystal surfaces by hydrofluoric acid

A selective etching phenomenon on {001} faceted anatase TiO(2) single crystal surfaces by HF and associated etching mechanism are reported. Density functional theory (DFT) calculations reveal that HF stabilizes the grown {001} facets at low concentrations, but selectively destroys the grown {001} facets at high concentrations.     

Mesoporous TiO2 core-shell spheres composed of nanocrystals with exposed high-energy facets: facile synthesis and formation mechanism

A facile new method that combines electrospray and hydrothermal treatment is used to prepare mesoporous core-shell TiO(2) spheres with high specific surface areas and high pore volumes. Interestingly, the resulting TiO(2) spheres are composed of anatase TiO(2) nanocrystals with exposed step-like {001} and smooth {010} facets. The percentage of exposed {001} facets can be adjusted by changing the experimental parameters used in the electrospray and hydrothermal treatment processes, such as the contents of poly(N-vinyl-2-pyrrolidone) and acetic acid. The combination of high specific surface area (>100 m(2) g(-1)), high pore volume (>0.30 cm(3) g(-1)), useful pore size (10-15 nm), spherical core-shell structure, and exposed high energy facets makes these TiO(2) spheres an important candidate for use in many photoelectrochemical applications. The formation mechanism of the mesoporous TiO(2) spheres is also studied. The great advantage of this method is that interesting and complicated mesoporous superstructures can be prepared using electrospray technology.     

暴露{001}面TiO2纳米片分等级花状结构的制备及其光催化活性

以钛酸盐纳米管为前驱体,在HF-H2O-C2H5OH的混合溶液中,采用一种简单的醇热方法合成了具有87%暴露{001}面的TiO2纳米片自组装形成的分等级花状TiO2超结构.运用X射线衍射、扫描电镜、透射电镜和N2吸附-脱附等方法对样品进行了表征,并在紫外光照射下于空气和溶液中分别考察了其光催化降解丙酮和甲基橙反应活性...     

Photocatalytic water oxidation on F, N co-doped TiO2 with dominant exposed {001} facets under visible light

Visible-light-responsive anatase TiO(2) platelets with dominant {001} facets were prepared via a facile nitridation reaction from a TiOF(2) precursor. The in situ co-doping of N and F in the anatase TiO(2) nanoparticles leads to drastically enhanced absorption and excellent water oxidation performance in the visible light region.     

Nonaqueous synthesis of TiO2 nanocrystals using TiF4 to engineer morphology, oxygen vacancy concentration, and photocatalytic activity

Control over faceting in nanocrystals (NCs) is pivotal for many applications, but most notably when investigating catalytic reactions which occur on the surfaces of nanostructures. Anatase titanium dioxide (TiO(2)) is one of the most studied photocatalysts, but the shape dependence of its activity has not yet been satisfactorily investigated and many questions still remain unanswered. We report the nonaqueous surfactant-assisted synthesis of highly uniform anatase TiO(2) NCs with tailorable morphology in the 10-100 nm size regime, prepared through a seeded growth technique. Introduction of titanium(IV) fluoride (TiF(4)) preferentially exposes the {001} facet of anatase through in situ release of hydrofluoric acid (HF), allowing for the formation of uniform anatase NCs based on the truncated tetragonal bipyramidal geometry. A method is described to engineer the percentage of {001} and {101} facets through the choice of cosurfactant and titanium precursor. X-ray diffraction studies are performed in conjunction with simulation to determine an average NC dimension which correlates with results obtained using electron microscopy. In addition to altering the particle shape, the introduction of TiF(4) into the synthesis results in TiO(2) NCs that are blue in color and display a broad visible/NIR absorbance which peaks in the infrared (λ(max) ≈ 3400 nm). The blue color results from oxygen vacancies formed in the presence of fluorine, as indicated by electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) studies. The surfactants on the surface of the NCs are removed through a simple ligand exchange procedure, allowing the shape dependence of photocatalytic hydrogen evolution to be studied using monodisperse TiO(2) NCs. Preliminary experiments on the photoreforming of methanol, employed as a model sacrificial agent, on platinized samples resulted in high volumes of evolved hydrogen (up to 2.1 mmol h(-1) g(-1)) under simulated solar illumination. Remarkably, the data suggest that, under our experimental conditions, the {101} facets of anatase are more active than the {001}.     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO2纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO2纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

Synthesis of {100} Facet Dominant Anatase TiO2 Nanobelts and the Origin of Facet‐Dependent Photoreactivity

Sword‐like anatase TiO₂ nanobelts exposed with 78 % clean {100} facets were synthesized and the facet‐dependent photoreactivity of anatase TiO₂ was investigated. By quantitative comparison with the reference {001} facets, the {100} facets possessed about ten‐times higher active sites density than that on {001} facets, resulting in higher photoreaction efficiency. After the active sites density normalization, the {100} and {001} facets exhibited distinct wavelength‐dependent photocatalytic performance, attributed to the anisotropic electronic structures in TiO₂ crystals.     

Solid state precursor strategy for synthesizing hollow TiO2 boxes with a high percentage of reactive {001} facets exposed

Three-dimensional, hollow, anatase TiO(2) boxes, each was enclosed by six single-crystalline TiO(2) plates exposed with highly reactive {001} facets, were facilely obtained by calcining a cubic TiOF(2) solid precursor at 500-600 °C. The formation of such particular nanostructures is attributed to the hard self-template restriction and the adsorption of F(-) ions from the TiOF(2).     

{001} facets dominated anatase TiO2: Morphology, formation/etching mechanisms and performance

Controllable growth of anatase TiO2 crystals with exposed high reactive crystal facets has aroused great attention in the fields of science and technology due to their unique structure-dependent properties. Recently, much effort has been paid to synthesize anatase TiO2 crystals with exposed high reactive {001} facets. Herein, we review the recent progress in synthesizing {001} facets dominated anatase TiO2 crystals with different morphologies by various synthetic methods. Furthermore, our review is mainly focused on the formation/etching mechanisms of {001} facets dominated anatase TiO2 crystals based on our and other studies. The extensive application potentials of the anatase TiO2 crystals with exposed {001} facets have been summarized in this review such as photocatalysis, photoelectrocatalysis, solar energy conversion, lithium ion battery, and hydrogen generation. Based on the current studies, we give some perspectives on the research topic. We believe that this comprehensive review on anatase TiO2 crystals with high reactive {001} facets can further promote the relative research in this field.     

Tunable photocatalytic selectivity of TiO2 films consisted of flower-like microspheres with exposed {001} facets

TiO(2) films composed of flower-like TiO(2) microspheres with exposed {001} facets were synthesized by a simple one-pot hydrothermal method and exhibited tunable photocatalytic selectivity towards decomposition of azo dyes in water by modifying the surface of TiO(2) microspheres as well as by varying the degree of etching of {001} facets.     

Anatase TiO(2) microspheres with exposed mirror-like plane {001} facets for high performance dye-sensitized solar cells (DSSCs)

Anatase TiO(2) microspheres with exposed mirror-like plane {001} facets were successfully synthesized via a facile hydrothermal process. The photoanode composed of TiO(2) microsphere top layer shows an improved DSSCs efficiency owing to the superior light scattering effect of microspheres and excellent light reflecting ability of the mirror-like plane {001} facets.     

Facet-Control versus Co-Catalyst-Control in Photocatalytic H2 Evolution from Anatase TiO2 Nanocrystals

Titanium dioxide (TiO₂) and, in particular, its anatase polymorph, is widely studied for photocatalytic H₂ production. In the present work, we examine the importance of reactive facets of anatase crystallites on the photocatalytic H₂ evolution from aqueous methanol solutions. For this, we synthesized anatase TiO₂ nanocrystals with a large amount of either {001} facets, that is, nanosheets, or {101} facets, that is, octahedral nanocubes, and examined their photocatalytic H₂ evolution and then repeated this procedure with samples where Pt co-catalyst is present on all facets. Octahedral nanocubes with abundant {101} facets produce >4 times more H₂ than nanosheets enriched in {001} facets if the reaction is carried out under co-catalyst-free conditions. For samples that carry Pt co-catalyst on both {001} and {101} facets, faceting loses entirely its significance. This demonstrates that the beneficial role of faceting, namely the introduction of {101} facets that act as electron transfer mediator is relevant only for co-catalyst-free TiO₂ surfaces.     

Evidence for crystal-face-dependent TiO2 photocatalysis from single-molecule imaging and kinetic analysis

According to the concept of active sites, the activity of heterogeneous catalysts correlates with the number of available catalytic sites and the binding affinity of the substrates. Herein, we report a single-molecule, single-particle fluorescence approach to elucidate the inherent photocatalytic activity of exposed surfaces of anatase TiO(2), a promising photocatalyst, using redox-responsive fluorogenic dyes. A single-molecule imaging and kinetic analysis of the fluorescence from the products shows that reaction sites for the effective reduction of the probe molecules are preferentially located on the {101} facets of the crystal rather than the {001} facets with a higher surface energy. This surprising discrepancy can be explained in terms of face-specific electron-trapping probability. In situ observation of the catalytic events occurring at the solid/solution interfaces reveals the hidden role of the crystal facets in chemical reactions and their impact on the efficiency and selectivity of heterogeneous (photo)catalysts.     

Hierarchical N-doped TiO2 hollow microspheres consisting of nanothorns with exposed anatase {101} facets

A green solvothermal synthesis approach employing water as a hollowing controller and diethylenetriamine as both crystal growth stabilizer and N dopant source to the preparation of hierarchical N-doped TiO(2) hollow microspheres comprised of nanothorns with exposed anatase {101} facets is established. The superstructured TiO(2) shows excellent photocatalytic activities in degrading dyes under visible light irradiation.