基于光纤微结构加工和敏感材料物理融合的光纤传感技术

将功能敏感材料与光纤在物理层面进行有机融合,充分发挥光纤传感器在结构集成、材料集成等方面的优势,将有望发展新型的光纤传感器件和系统.本文综述了飞秒激光光纤微加工技术分别在标准的单模光纤和光纤光栅上制备微结构,再结合敏感材料制备技术,实现在物理层面上光纤传感器材料和结构的集成和融合,探索实现新型高性能的光纤传感新技术.     

基于飞秒激光加工的马赫-曾德尔干涉氢气传感器

介绍了一种基于光纤微加工的氢气传感技术方案。利用波长为800nm的飞秒激光脉冲在普通单模光纤上加工马赫-曾德尔(M-Z)干涉腔,并采用磁控溅射方法在加工后的M-Z干涉微腔上溅射钯(Pd)膜,制备了一种新型的光纤氢气传感器。分析了加工工艺对微腔干涉效果的影响,选择合适的加工参数以及加工后对微腔进行后续处理,可使微腔的透射光谱的分辨率得到提高。实验研究了腔长为40μm的M-Z干涉传感器分别镀36nm、110nmPd膜后,对氢气的响应。结果表明,在不同的氢气浓度下,镀Pd膜的M-Z干涉传感器都表现出对氢气的敏感特性,随着氢气浓度的增大,透射光谱会向长波长方向偏移,其中Pd膜厚度为110nm比厚度为36nm的传感器对氢气有更好的灵敏度。     

太赫兹波段电磁超材料吸波器折射率传感特性

太赫兹超材料吸波器作为一类重要的超材料功能器件,除了可以实现对入射太赫兹波的完美吸收外,还可以作为折射率传感器实现对周围环境信息变化的捕捉与监测.通常从优化表面金属谐振单元结构和改变介质层材料和形态两个方面出发,改善太赫兹超材料吸波器的传感特性.为深入研究中间介质层对太赫兹超材料吸波器传感特性的影响,本文基于金属开口谐...     

Photonic crystal fiber tip interferometer for refractive index sensing

In this paper we present an interferometer based on photonic crystal fiber (PCF) tip ended with a solid silica-sphere for refractive index sensing. The sensor is fabricated by splicing one end of the holey PCF to a single mode fiber (SMF) and applying arc at the other end to form a solid sphere. The sensor has been experimentally tested for refractive index and temperature sensing by monitoring its wavelength shift. Measurement results show that the sensor has the resolution of the order of 8.7×10(-4) over the refractive index range of 1.33-1.40, and temperature sensitivity of the order of 10 pm/°C in the range of 20-100 °C.     

基于椭球封闭空气腔的光纤复合法布里-珀罗结构折射率传感特性研究

提出了基于微椭球型空气腔的在线型光纤复合法布里-珀罗干涉结构,并对其折射率传感特性进行了研究.椭球型空气微腔是利用光纤熔接机对实芯光子晶体光纤和单模光纤以特定的熔接参数熔接形成.用高斯光束模型和ABCD法则分析了椭球型空气腔的腔内损耗,建立了电磁场在复合法布里-珀罗干涉结构中传播的物理模型.根据腔长比值的不同,环境折射率对干涉条纹的影响有对比度调制和波长调制,主要研究了一种波长调制型复合法布里-珀罗结构折射率传感器.仿真结果表明该折射率传感器在1—1.6范围内不出现折射率转折点;实验结果表明在1.333—1.466范围内,折射率灵敏度～37.088 nm·RIU-1,分辨率约为2.69×10-5.该光纤复合法布里-珀罗结构干涉条纹对比度高、体积小、成本低,用于折射率测量可靠性高、分辨率高、无折射率拐点、温度串扰小.     

Femtosecond laser microfabricated fiber Mach-Zehnder interferometer for sensing applications

We demonstrate a femtosecond laser microfabricated fiber Mach-Zehnder interferometer and reveal the dependences of the sensitivities of different environmental parameters on the specifications of the interferometer. A 30-mm-long fiber interferometer at a wavelength of 1593 nm exhibits a temperature sensitivity of 0.103 nm/°C, axial strain sensitivity of -1.35 pm/με, and refractive index sensitivity of -15.294 nm/RIU, respectively. In addition to dependence on interferometer length, the sensitivities are also strongly dependent on the operation wavelength of the selected interference order. When the operation wavelength is selected at 1525 nm, the sensitivities are 0.085 nm/°C, -0.09 pm/με, and -13.824 nm/RIU, respectively.     

Fiber Mach-Zehnder interferometer based on microcavities for high-temperature sensing with high sensitivity

A high-temperature sensor based on a Mach-Zehnder interferometer (MZI) in a conventional single-mode optical fiber is proposed and fabricated by concatenating two microcavities separated by a middle section. A femtosecond laser is used to fabricate a microhole on the center of a fiber end. Then a micro-air-cavity is formed by splicing the microholed fiber end with a normal fiber end. The interferometer is applied for high-temperature sensing, in the range of 500-1200?°C, with a sensitivity of 109 pm/°C that, to the best of our knowledge, is highest in silica fiber temperature sensors. Also, the interferometer is insensitive to external refractive index (RI), which is desirable for temperature sensors.     

Optomechanical sensing with on-chip microcavities

The coupling between optical and mechanical degrees of freedom has been of broad interest for a long time. However, it is only until recently, with the rapid development of optical mierocavity research, that we are able to manipulate and utilize this coupling process. When a high Q microeavity couples to a mechanical resonator, they can consolidate into an optomeehanieal system. Benefitting from the unique characteristics offered by optomeehanical coupling, this hybrid system has become a promising platform for ultrasensitive sensors to detect displacement, mass, force and acceleration. In this review, we introduce the basic physical concepts of cavity optomechanies, and describe some of the most typical experimental cavity optomechanical systems for sensing applications. Finally, we discuss the noise arising from various sources and show the potentiality of optomechanical sensing towards quantum-noise-limited detection.     

基于光纤粗锥型马赫-曾德尔干涉仪的高灵敏度温度传感器的研制

光纤传感是现代光纤技术的重要应用之一。制作了一种基于两个单模光纤粗锥串接的全光纤型马赫-曾德尔高温高灵敏温度传感器。纤芯中传输的光通过第一个光纤锥耦合, 一部分进入纤芯传输,另一部分进入包层形成包层模,纤芯模和包层模具有不同的有效折射率,经过干涉臂的传输产生了光程差。纤芯和包层传输的光再经过第二个光纤锥耦合,形成干涉进入输出光纤传输。对不同长度的传感器进行实验研究,得出传感臂长度与干涉周期之间的关系。研究了传感器温度响应特性,给出了温度响应灵敏度。实验结果表明,在30～400 ℃温度范围内,长度为35 mm的传感器可以得到较高的温度响应灵敏度,其响应灵敏度为0.115 nm·℃-1。利用傅里叶变换对传感器透射谱进行了分析,可以确定在长度为35 mm的传感器中仅有基模LP₀₁和高阶模LP₀₈两种模式,透射谱就是由这两种模式干涉形成的。该传感器体积小、精度高、抗电磁干扰,具有易于制作、对比度大、质轻、灵敏度高、耐高温等优点。可用于高温气体温度测量及油气井测井等领域的高灵敏度温度传感测量。     

Sn掺杂ZnO薄膜的室温气敏性能及其气敏机理

采用化学气相沉积方法在预制好电极的玻璃基底上制备出Sn掺杂ZnO薄膜和纯ZnO薄膜. 两种样品典型的形貌为四足状ZnO晶须, 其直径约为150-400 nm, 呈疏松状结构. 气敏测试结果显示Sn掺杂ZnO薄膜具有优良的室温气敏性, 并对乙醇具有良好的气敏选择性, 而纯ZnO薄膜在室温条件下对乙醇和丙酮均没有气敏响应. X射线衍射结果表明两种样品均为六方纤锌矿结构. Sn掺杂ZnO样品中没有出现Sn及其氧化物的衍射峰, 其衍射结果与纯ZnO样品对比, 衍射峰向小角度偏移. 光致发光结果表明, Sn掺杂ZnO薄膜与纯ZnO薄膜均出现紫外发光峰和缺陷发光峰, 但是Sn的掺杂使得ZnO的缺陷发光峰明显增强. 将Sn掺杂ZnO样品在空气中退火后, 其室温气敏性消失, 说明Sn掺杂ZnO样品的室温气敏性可能与其缺陷含量高有关. 采用自由电子散射模型解释了Sn掺杂ZnO薄膜的室温气敏机理.     

Gas sensing properties of index-guided PCF with air-core

The gas sensing properties of index-guided photonic crystal fiber (PCF) with air-core are investigated via full-vector finite element method. The relationships between the gas sensing properties of index-guided PCF with air-core and the fiber parameters, including the fiber length and the operating wavelength, have been discussed. The simulations show that the gas sensing sensitivity of the fiber increases significantly as the diameter of the air holes increases, and it decreases with the holes pitch. Compared with the traditional PCF, there is a great improvement in the sensing properties of our design. The results are helpful for designing high performance PCF for gases or liquids sensing.     

Geometrical optimization of organic microlasers for microfluidic chemical sensing

We report the design, fabrication, and demonstration of a chemical sensor-based on the spectral shift of organic microcavity lasers. The shape of the cavity contour is used as a parameter and is optimized to improve the sensitivity. Analytical and numerical predictions are in good agreement with experiments performed in a microfluidic environment, showing sensitivities of up to 100 nm per refractive index unit for stadium-shaped microlasers on pedestal. Selective sensing of Hg²⁺ at a concentration down to 200 ppb is then demonstrated with cavities functionalized by ligands that are known to bind mercuric cations.     

双法布里—珀罗干涉仪传感模型的理论分析

本文提出了一种用发光二极管作为光源、用自聚焦透镜构成法布里-珀罗腔的双法布里-珀罗干涉仪光纤位移传感模型.根据部分相干光的干涉理论,得到了这个传感模型输出光强与两个法布里一珀罗干涉仪腔长之差的函数曲线.     

Optimal sensing of current based on an extrinsic Sagnac interferometer configuration

The theory and experimental verification of an optical current sensor based on an extrinsic Sagnac interferometer configuration is presented. Superior performance with regard to current sensitivity and input/output linearity, and simple installability of the sensor makes it very suitable for remote current sensing in power distribution applications.     

高灵敏度的量子迈克耳孙干涉仪

迈克耳孙干涉仪不仅可以用来研究物理学的基本问题,而且能够用于精密测量,比如引力波信号的测量.因此,构建高灵敏度的迈克耳孙干涉仪是实现微弱信号测量的关键.目前,人们利用压缩态可以降低迈克耳孙干涉仪的噪声;通过光学四波混频过程能够放大马赫·曾德尔干涉仪中的相位信号,从而提高干涉仪的信噪比和灵敏度.本文研究了一种用于高灵敏度相位测量的量子迈克耳孙干涉仪.在迈克耳孙干涉仪中,利用非简并光学参量放大器取代干涉仪中的线性光学分束器;并且将压缩态注入干涉仪的真空通道,可以得到高信噪比和高灵敏度的干涉仪.由于存在不可避免的光学损耗,分析了迈克耳孙干涉仪内部和外部的损耗对相位测量灵敏度的影响.通过理论计算研究了干涉仪的相位测量灵敏度随系统参数的变化关系,得到了高灵敏度的相位测量量子迈克耳孙干涉仪的实现条件,为用于精密测量的干涉仪的设计提供了直接参考.     

Electric Voltage Tuning of an All-fiber Mach-Zehnder Interferometer

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　ＴｈｅｃｏｎｖｅｎｔｉｏｎａｌＭａｃｈ Ｚｅｈｎｄｅｒｉｎｔｅｒｆｅｒｏｍｅｔｅｒｉｓａｎｉｍｐｏｒｔａｎｔｄｉａｇｎｏｓｔｉｃｔｏｏｌ.Ｆｒｅｑｕｅｎｔｌｙｕｓｅｄｉｎｔｈｅｆｉｅｌｄｓｏｆｐｌａｓｍａｐｈｙｓｉｃｓ,ａｅｒｏｄｙｎａｍｉｃｓ,ａｎｄｈｅａｔｔｒａｎｓｆｅｒｆｏｒｍｅａｓｕｒｉｎｇｄｅｎｓｉｔｙ ,ｐｒｅｓｓｕｒｅ ,ａｎｄｔｅｍｐｅｒａｔｕｒｅｃｈａｎｇｅｓｉｎｇａｓｅｓ.Ｂｅｃａｕｓｅｏｆｉｔｓｒｅｌａｔｉｖｅｌｙｌａｒｇｅａｎｄｆｒｅｅｌｙａｃｃｅｓ…     

Photonic crystal microcavity as a highly sensitive platform for RI detection

In this paper, we propose a new design principle of two-dimensional photonic crystal refractive index sensors with high transmission and sensitivity simultaneously. The proposed sensor is made of two waveguide couplers and one microcavity which is obtained by varying the radius of one air hole in the center of PC structure. The microcavity is separated from the input and output waveguides by many holes of the PC. It is shown that by injecting an analyte such as gas or a liquid into a sensing hole, and thus changing its refractive index, a shift in the resonant wavelength may occur. The transmission spectra, quality factor and sensitivity of the sensor have been analyzed numerically by the finite difference time domain (FDTD) method. The sensitivity value of the sensor has been found to be 668 nm/(RIU with minimum detection limit of 0.002 RIU), which proves the ability of the structure to produce biosensor PhC.     

Temperature characteristics of a core-mode interferometer based on a dual-core photonic crystal fiber

A core-mode Fabry–Perot (FP) interferometer is constructed by using a dual-core photonic crystal fiber (DCPCF). The FP cavity is formed by a single piece of DCPCF, which can also serve as a direct sensing probe without any additional components. We theoretically and experimentally studied its temperature responses in the range of 40–480 °C. The temperature sensitivity is 13 pm/°C which matches the theoretical results. Since the temperature sensitivity of the proposed sensor is independent on cavity length, precise control of the length of FP cavity or photonic crystal fiber is not required. The sensor size can be as short as 100–200 μm, and its fabrication only involves splicing and cleaving, which make the sensor production very cost-effective. The proposed FP interferometric sensor based on a DCPCF can find applications in high-temperature measurement especially those that need accurate point measurement with high sensitivity.     

Signal processing techniques for absolute displacement/strain sensing using a fiber interferometer

We present two displacement sensing techniques which rely on amplitude variations of Bessel frequency components contained in the photodetected output of a phase modulated two-beam interferometer. Experimental results demonstrate demodulated output signals that correspond to the absolute optical path difference between the two arms of an interferometer. Optical displacements over a 50 mm range have been recorded with a resolution of 25 microns. Both approaches are suitable for passive remote sensing applications.     

Preparation of Cu-Zn/ZnO core-shell nanocomposite by wire electrical explosion and precipitation process in aqueous solution and CO sensing properties

Cu-Zn/ZnO nanocomposites with a novel core-shell structure have been prepared by a surface precipitation process in aqueous solution. X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy are employed to analyze the structure and morphology of the present products. The influence of the annealing temperature on the core-shell structure of the nanocomposites is investigated, and a possible growth model is proposed. Furthermore, the gas sensors based on the Cu-Zn/ZnO nanocomposites are fabricated and tested, which exhibits high sensitivity and fast response to CO. The best results are obtained for the sensor based on the film annealed at 350 °C, which shows that the sensitivity is about 6.3 when the sensor is exposed to 100 ppm CO at the operating temperature of 240 °C. The possible sensing mechanism of the Cu-Zn/ZnO sensing film has also been discussed.