Magneto-optic fiber Sagnac modulator based on magnetic fluids

A magneto-optic modulator with a magnetic fluid film inserted into an optical fiber Sagnac interferometer is proposed. The magnetic fluid exhibits variable birefringence and Faraday effect under external magnetic field that will lead to a phase difference and polarization state rotation in the Sagnac interferometer. As a result, the intensity of the output light is modulated under the external magnetic field. Moreover, the modulator has a high extinction ratio and can easily be integrated in a single-mode fiber system. The performance of the modulator is not affected by ambient temperature variation from room temperature to 40 °C.     

Study on magnetic fluid optical fiber devices for optical logic operations by characteristics of superparamagnetic nanoparticles and magnetic fluids

We propose two optical fiber-based schemes using two magnetic fluid optical fiber modulators in series or in parallel for optical logic signal processing and operation. Here, each magnetic fluid optical fiber modulator consists of a bare multimode fiber surrounded by magnetic fluid in which the refractive index is adjustable by applying external magnetic fields amplifying the input electrical signal to vary the transmission intensity of the optical fiber-based scheme. The physical mechanisms for the performances of the magnetic fluid optical fiber devices, such as the transmission loss related to Boolean number of the logic operation as well as the dynamic response, are studied by the characteristics of superparamagnetic nanoparticles and magnetic fluids. For example, in the dynamic response composed of the retarding and response sub-procedures except the response times of the actuation coil, the theoretical evaluation of the retarding time variation with cladding magnetic fluids length has good agreement with the experimental results.     

基于酒精与磁流体填充的单模-空芯-单模光纤结构温度磁场双参数传感器

提出了一种基于空芯光纤模间干涉原理的环境温度和磁场双参数传感器,为了使光入射进空芯光纤壁中,将空芯光纤与单模光纤错位熔接,传感部分用毛细玻璃管封装,空芯光纤内外分别填充酒精和磁流体.除了光纤材料的热光效应和热膨胀效应外,环境温度变化会引起两种溶液折射率的变化,而磁场变化仅引起空芯光纤外的磁流体折射率变化.理论计算可知空芯光纤壁中可支持多个模式传输并相互干涉,各模式传输相位对内外溶液折射率变化灵敏程度不同.因此,干涉谱中两个含有不同模式成分的波谷,即波谷1和波谷2,它们的漂移可以作为指示信号,通过建立敏感矩阵可同时解调出周围环境温度与磁场的变化.实验中,在28—58℃范围内,温度传感灵敏度可达-468 pm/℃;在0—169 Oe范围内磁场传感灵敏度可达82 pm/Oe.该传感器具有高灵敏度与高机械强度,并且能够实现温度与磁场的同时测量,有效消除了温度波动对磁场测量信号的干扰.     

Polarization-independent magnetic control of the light phase in a chiral optical fiber

The proposition is made to fine-tune the phase of an unpolarized guided mode in a chiral optical waveguide, or fiber, by a static magnetic field applied in the direction of the light propagation. The core of the fiber should consist of randomly oriented chiral molecules, and the magnetic field-induced change of the refractive index would be due to the magnetochiral effect [1]. Although the magnetochiral birefringence is very small for magnetic field strengths obtainable under routine laboratory conditions, the induced phase shift for a given magnetic field should be maximized by increasing the pathlength of light inside the field. This would be technically achievable by winding the optical fiber axially many times around the electric solenoid that generates the magnetic field, in such a way that the path of the light inside the fiber follows closely and over a distance as long as possible the magnetic induction lines.     

Diffraction-limited dark laser spot produced by a hollow optical fiber

By using the diffracted field of the LP(11) mode of a hollow-core optical fiber, we have produced a micrometer-sized, focused dark laser spot in the near field of the fiber. The minimum half-width of the dark spot is less than 1 mum . In particular, by masking the hollow core and metal coating the cladding with a microsphere, we blocked the light propagating in the cladding and obtained a clean dark spot, which may be useful in atom-optical experiments such as with atomic lenses, atom traps, and atom switches.     

Designing optical-fiber modulators by using magnetic fluids

To reduce interface loss between optical fibers and devices in telecommunication systems, the development of an optical-fiber-based device that can be fused directly with fibers is important. A novel optical modulator consisting of a bare fiber core surrounded by magnetic fluids instead of by a SiO2 cladding layer is proposed. Applying a magnetic field raises the refractive index of the magnetic fluid. Thus we can control the occurrence of total reflection at the interface between the fiber core and the magnetic fluid when light propagates along the fiber. As a result, the intensity of the outgoing light is modulated by variation in field strength. Details of the design, fabrication, and working properties of such a modulator are presented.     

Semiconductor-doped liquid-core optical fiber

A semiconductor liquid-core optical fiber has been made by simply filling the hollow core of a capillary waveguide with nanoparticles suspended in toluene media. Under a low continuous optical power excitation at 532 nm, the emission of PbSe particles was clearly demonstrated in the infrared region and then partially maintained in the core of the fiber by the total internal reflection mechanism. Finally, due to the guided propagation, which results in multiple absorption effects, a linear shift of the emission peak toward longer wavelengths was observed (~0.32 nm/cm). As a proof of concept, this original demonstration of visible-to-infrared conversion could lead to the development of active fibered devices at wavelengths not covered by the conventional rare-earth ion doping.     

Magneto-controlled illumination with opto-fluidics

Imaging of micro- and nanofluidics is a challenge since the size of the channels is so small that the installment of additional optical and mechanical switches is very difficult. The size of the device and associated increase in viscous dissipation constitute another constraint. In response to these limitations, this work proposes and demonstrates the manipulation of light by adding a functional lens to control the light on demand. In the present work, this lens is realized by filling a hollow fiber with a colloid of superparamagnetic Fe₃O₄ nanoparticles. When the propagation of light is perpendicular to the magnetic field, this lens stretches the circular beam into a ribbon yielding a larger visible area. Potentially, one can apply a rotating magnetic field thus illuminating a larger spot size or creating other beam geometries. Such composite fibers might also be of value for Faraday isolation and other magneto-optic effects in optical fibers.     

产生纳米级暗中空光束的方法研究

用时域有限差分法，给出光纤头近场区电场强度模的空间分布.讨论了当光纤纤芯分别取不同尺寸时，对此空间光场强度的影响.要想得到较大范围的暗中空光束，必须增加光纤纤芯尺寸.并且，对光纤纤芯尺寸取一较大值和光纤中空区域尺寸取一较小值时的情况进行讨论，可得在光纤头附近可以出现与光纤中空区域尺寸大小相当的暗斑(10¹ nm量级).但是，暗中空光束中背景光较强.为此，将光纤的空心设计为金属. 发现此时中心暗斑的背景光明显减弱，在近场区域可获得较为理想的暗中空光束.如进一步缩小光纤中空区域尺寸，可以在光纤头附近获得暗斑更小甚至纳米量级的暗中空光束.为获得一种纳米量级的暗中空光束提供一种方法.     

Magneto-optical fiber sensor based on magnetic fluid

A novel magnetic field fiber sensor based on magnetic fluid is proposed. The sensor is configured as a Sagnac interferometer structure with a magnetic fluid film and a section of polarization maintaining fiber inserted into the fiber loop to produce a sinusoidal interference spectrum for measurement. The output interference spectrum is shifted as the change of the applied magnetic field strength with a sensitivity of 16.7 pm/Oe and a resolution of 0.60 Oe. The output optical power is varied with the change of the applied magnetic field strength with a sensitivity of 0.3998 dB/Oe.     

Mode characteristics of hollow core Bragg fiber

Analytical expression to calculate propagation constant and mode field of the hollow core Bragg fiber is derived. Numerical results are presented. It is shown that the fundamental mode of the hollow core Bragg fiber is circularly symmetric TE01 mode with no polarization degeneracy, while the higher order mode may be HE11, TM01, or TE02 etc.. This property is different from conventional optical fiber that its fundamental mode is the linearly polarized HE11 mode and is polarization degeneracy.     

Suspended twin-core f iber for optical switching

A kind of novel fiber, comprising two fiber cores which are suspended in air inside the outer cladding via a central thin membrane ,is proposed for optical switching application. When a hydrostatic pressure applied on the optical fiber, the pressure-induced refractive index change of the two fiber cores will contribute to the periodical change of the intensity of guided light in the fiber core. The mode coupling of two cores under different hydrostatic pressure and influences of each structure parameter of the proposed fiber on the switching nressure have been numerically invo.stigated.     

Versatile control of geometric birefringence in elliptical hollow optical fiber

A novel optical fiber fabrication technique was developed by converting the symmetry of the silica substrate into the germanosilicate ring core to efficiently introduce geometric birefringence in an elliptical hollow optical fiber. Due to high ellipticity in the hollow ring core, the fiber provides an extremely high group birefringence of 2.35 x 10(-3) at 1550 nm. Single-mode single-polarization guidance was also experimentally confirmed, with a bandwidth of approximately 35 nm. The generic adiabatic mode conversion capability in the taper also provided a stable fusion splice to conventional single-mode fiber with low loss and high tensile strength.     

Waveform shaping of 1550 nm transmission through hollow quartz fiber

In this paper, we connected two single-mode fiber ends with a micron hollow quartz fiber. The hollow fiber was used to modulate the waveform of a 1550 nm light signal, resulting in a lower noise and a narrower linewidth. Specifically, the noise range and the linewidth decreased from 14% to 3% and 0.28–0.23 nm, respectively. The light field distribution and far-field intensity distribution of the hollow fiber are studied using finite difference time domain simulation. Furthermore, we discussed the research suggestions of this configuration in detail. Collectively, these results suggest that it can be used in the fields of optical signal processing, fiber laser and optical sensor.     

Polarization in D-shaped fiber modulated by magneto-optical dichroism of magnetic fluid

The polarization of a D-shaped fiber is modulated after immersing it in magnetic fluid(MF)and applying a magnetic field.Theoretical analysis predicts that magneto-optical dichroism of MF plays a key role in light polarization modulation.During light polarization modulation,the evanescent wave polarized parallel to the magnetic field has greater loss than its orthogonal component.Light polarization of a D-shaped fiber with a wide polished surface can be modulated easily.High concentration MF and a large magnetic field all have great ability to modulate light polarization.     

Random fiber laser of POSS solution-filled hollow optical fiber by end pumping

Random fiber laser is obtained by end pumping a hollow optical fiber (HOF) filled with a dispersive solution of polyhedral oligomeric silsesquioxanes (POSS) nanoparticles and laser dye pyrromethene 597 (PM597) in carbon disulfide (CS₂), in which the concentration is 1.5×10^?2 M for PM597 and 18.5 wt% for POSS, respectively. It is found that the pump light at the one end of the liquid core optical fiber (LCOF) can pass the whole length of LCOF because the POSS nanoparticles were dispersed in CS₂ at a molecular level (1–3 nm) with high stability and without sedimentation. Above the threshold pump energy (～0.81 mJ) the random fiber laser appears coherent and resonant feedback multimode lasing in the weakly scattering system. For the LCOF containing PM597 with the same concentration and no POSS nanoparticles, there occurs only ASE that can be observed under the same experimental condition.     

Three-hole microstructured optical fiber for efficient fiber Bragg grating refractometer

We present a photosensitive three-hole microstructured optical fiber specifically designed to improve the refractive index sensitivity of a standard fiber Bragg grating (FBG) sensor photowritten in the suspended Ge-doped silica core. We describe the specific photowriting procedure used to realize gratings in such a fiber. We then determine their spectral sensitivity to the refractive index changes of material filling the holes surrounding the core. The sensitivity is compared with that of standard FBGs photowritten in a six-hole fiber with a larger core diameter. We demonstrate an improvement in the sensitivity by two orders of magnitude and reach a resolution of 3 x 10(-5) and 6 x 10(-6) around mean refractive index values of 1.33 and 1.40, respectively.     

基于石墨烯涂覆空心光纤电光调制特性的研究

设计了一种新型的石墨烯-空心光纤可调谐结构, 将石墨烯涂覆在空心光纤的空气孔内表面上, 利用有限元法研究了该结构的电光调制特性. 通过改变石墨烯的化学势可以调控光纤的相位和开关特性, 还可以调谐光纤损耗峰与次峰的位置、强度和宽度. 然而, 空气孔半径和石墨烯层数不会改变开关点和损耗峰与次峰的位置, 只会改变损耗差和损耗峰的强度和宽度, 而且由N 层石墨烯引起的损耗差是单层的N倍. 这是因为石墨烯的介电常数决定了光纤的有效折射率和损耗, 通过改变石墨烯的化学势可以改变石墨烯的介电常数, 而石墨烯的层数和空气孔半径却不会改变石墨烯的介电常数, 但是改变了石墨烯和光的作用强度. 经过参数优化之后, 我们提出一种基于五层石墨烯涂覆空心光纤的电吸收型调制器, 工作在1180–1760 nm波段, 具有小尺寸(5 mm×125 μm)、宽光带宽(580 nm)、高消光比(16 dB)、高调制带宽(64 MHz) 和低插入损耗(1.23 dB) 特性. 研究结果对基于石墨烯的可调谐光纤光子器件的设计和应用提供了理论参考.     

一体化光纤滤除器和端帽实现20 kW激光输出北大核心CSCD

在高功率光纤激光系统中,包层光滤除器能将光纤中包层光滤除以保证输出激光光束质量,光纤端帽通过对输出激光扩束降低输出光纤端面的光功率密度,从而保护光纤端面不受损坏,两者都是高功率光纤激光系统稳定运行的重要核心器件。将包层光滤除器和光纤端帽进行一体化设计,制备了一体化高功率光纤包层光滤除器和光纤端帽并分别应用于20 kW合束系统和单纤系统中,输出功率达到20 kW时,端帽的最高温度约为40℃,温升速率约为0.8℃/kW。     

Optical amplification of Eu(TTA)3Phen solution-filled hollow optical fiber

A liquid core optical fiber (LCOF) composed of hollow fiber and a solution of Eu(TTA)(3)Phen (TTA=2-thenoyltrifluoroacetone, Phen=1, 10-phenanthroline) in dimethyl sulfoxide (DMSO) has been fabricated, in which the concentration of Eu(TTA)(3)Phen in DMSO is 0.8 wt.%, the core diameter of the LCOF is 10 μm, and the fiber length is 8.1 cm. By the end pumping with a diode-pumped solid-state laser at 355 nm, a small optical signal at 613 nm was amplified with a gain of 8.2 dB at a pump power of 203 mW. Based on this experimental result, a liquid core optical fiber amplifier can be realized by the LCOF, which has wide potential applications in many optical devices.