与LED匹配的白光发射荧光体的研究进展

综述了自1996年第一个YAG：Ce InGaN白光LED问世以来与LED匹配的白光发射荧光体的研究进展。介绍了对传统光转换材料YAG：Ce的改良工作,包括发射位置的调节、显色性的提高。介绍了新型的光转换材料Sr3SiO5：Eu2 、SrGa2S4：Eu2 、CaAlSiON：Eu2 、BAM：Eu2 Mn2 和一些发光聚合物等。最后展望了该类发光材料的发展趋势。     

氮(氧)化物荧光粉研究进展

氮氧化物荧光粉材料具有高发光效率、可被可见光有效激发、荧光特性可设计性强、热稳定性高和环境友好等诸多优点,因此成为白光LED用荧光体的重要候选材料.近年来,国际材料学界掀起了稀土掺杂氮氧化物荧光粉的研究热潮,并取得了一系列创新性研究成果.本文综述了各种新型氮氧化物荧光粉的制备方法,重点分析了各类稀土掺杂氮氧化物荧光粉的发光特征及其研究进展,最后探讨了氮氧化物荧光粉的研究发展方向.通过改变稀土掺杂离子周围的晶体场环境实现对荧光体发光性能的裁剪设计、激活离子在荧光体基质材料中所占据结晶位置的确定、高质量红光氮氧化物荧光体的研发等将是氮氧化物荧光体未来研究的主要方向.     

黄光类水滑石的制备、表面改性及应用

采用共沉淀法合成了荧光类水滑石材料,该材料在470 nm蓝光激发下可发出黄色荧光(557 nm),采用硅烷偶联剂对其进行表面改性,探讨了表面改性对黄光类水滑石的发光性能、结构及热稳定性的影响。将改性黄光类水滑石与GaN基蓝光芯片封装后制得了白光LED。研究结果表明,改性的黄光类水滑石是制作白光LED可供选用的黄色发光材料。本文成功地将低温一步法制备得到的金属有机配合物/无机纳米杂化材料应用于LED,拓展了LED用荧光粉的选用范围。     

黄光类水滑石的制备、表面改性及应用

采用共沉淀法合成了荧光类水滑石材料,该材料在470 nm蓝光激发下可发出黄色荧光(557 nm),采用硅烷偶联剂对其进行表面改性,探讨了表面改性对黄光类水滑石的发光性能、结构及热稳定性的影响。将改性黄光类水滑石与GaN基蓝光芯片封装后制得了白光LED。研究结果表明,改性的黄光类水滑石是制作白光LED可供选用的黄色发光材料。本文成功地将低温一步法制备得到的金属有机配合物/无机纳米杂化材料应用于LED,拓展了LED用荧光粉的选用范围。     

白光LED用氮(氧)化合物荧光粉

本文综合评述了近年来氮(氧)化合物荧光粉的制备方法、发光性质、机理及其在白光LED中的应用情况。这类荧光粉因其结构的多样性和电子云扩大效应的影响,一般在紫外-蓝光区具有高的吸收效率,并且随着基质和激活离子的改变,发射光谱可覆盖整个可见光区域,因此它们适用于荧光粉转换型白光LED。利用氮(氧)化合物封装的白光LED具有高的发光效率、色坐标稳定性、显色指数和可调节的色温,进一步显示它们将是一类在白光LED上非常适用的材料。最后本文指出了氮(氧)化合物荧光粉研究中尚未解决的问题。     

亚微米级红色荧光粉NaEu(MoO4)2的水热合成及光谱特性

20世纪90年代,GaN基发光二极管(LED)技术上的突破为白光LED的出现奠定了基础[1～3].白光LED作为一种新型固态照明光源已备受瞩目,它具有光效高,寿命长,无污染等优点[4,5].实现白光LED有多种方案.最理想的是将近紫外LED芯片与可被近紫外有效激发而发射红、绿、蓝三基色荧光体有机结合组成白光LED[6].     

YAG:Ce,Mn微晶玻璃的制备及光谱性能研究

由于YAG:Ce微晶玻璃缺乏红色发光成分,导致其封装的白光LED显色指数低.以Y2O3-Al2 O3-SiO2-Li2O作为Ce,Mn掺杂的基质,制备了可提高显色指数的白光LED用YAG:Ce,Mn微晶玻璃.通过XRD测试、荧光测试和电光源测试表征了玻璃的晶相结构、光谱性能及荧光寿命,研究了Mn2+对YAG:Ce微晶玻璃发光的影响,并对其增红机制进行了探讨.结果表明:基玻璃在1400℃热处理可析出纯YAG晶相;YAG:Ce,Mn微晶玻璃在460 nm光激发下,在530 nm处有Ce3+的特征发射峰,由于Ce3+-Mn2+之间的能量传递,在585 nm处有Mn2的特征发射峰,从而使得YAG:Ce,Mn微晶玻璃的发光峰比YAG:Ce微晶玻璃的发光峰向红光方向宽化,有效地提高了白光LED的显色性能.     

Er3+/Tm3+共掺镱基纳米晶上转换白光调控及应用

稀土掺杂上转换白光材料在固态照明、液晶显示器和信息防伪等领域具有重要应用前景。然而,以前的工作主要集中在惰性基质材料体系,难以大幅提升敏化剂掺杂浓度,大大限制了上转换白光发射强度。为解决这一问题,提出一种基于LiYbF₄@LiYF₄的核壳纳米结构设计,以敏化剂LiYbF₄基质为晶核并掺杂适当浓度的激活剂Er³⁺和Tm³⁺,成功实现980nm激发的上转换白光发射。进一步设计了LiYbF₄∶Er/Tm@LiYbF₄@LiYF₄∶Nd核壳壳结构,利用Nd³⁺吸收808nm激发光,实现了980和808nm双通道激发的上转换白光发射。将白光上转换纳米晶结合940nm近红外芯片封装成发光二极管(LED)器件,施加300mA电流激发出明亮的白光,展示了其在白光LED方面的应用潜力。     

固态照明用稀土荧光粉和无机量子点:机遇与挑战

白光发光二极管(w-LED)固态照明器件具有使用寿命长、环保节能、体积小及安全性高等优点,经过10多年的发展已基本取代传统白炽灯、荧光灯而成为新一代照明光源。 荧光转换材料作为w-LED中的核心材料,直接影响着器件的性能指标。 因此,开发高性能荧光转换材料对进一步提升w-LED器件性能至关重要。 本文围绕稀土荧光粉和无机量子点这两类固态照明用无机发光材料进行介绍,综述了w-LED用稀土荧光粉的结构设计、组成及发光性能调控等方面的进展,代表性地介绍了以ZnS为代表的硫族化合物、铅卤钙钛矿和碳点3类典型的光致发光量子点及其w-LED的设计与光谱调控研究工作,最后提出了稀土荧光粉和无机量子点作为固态照明用荧光转换材料所存在的机遇和挑战。     

助熔剂对Y3Al5O12∶Ce荧光粉性能的影响

在还原气氛下采用高温固相反应法合成了白光LED用黄色荧光粉 Y3Al5O12∶Ce(YAG∶Ce), 研究了助熔剂对YAG∶Ce荧光粉发光特性的影响. XRD的测量结果表明加入合适的助熔剂有利于YAG∶Ce荧光粉的晶化, 并且不引入杂相. 选择BaF2和H3BO3同时使用效果要好于单独使用一种助熔剂. 助熔剂的加入可增大YAG∶Ce荧光粉的激发和发射光谱强度, 并能有效降低荧光粉的中心粒径(D50)控制粉体的粒径分布, 适用于白光LED的制造.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.