Chlorides, oxochlorides, and oxoacids of 1,8-diphosphanaphthalene: a system with imposed close p...p interaction

Several new 1,8-diphosphanaphthalene oxochloro compounds and oxoacids were prepared and fully characterized. The new compounds are discussed in the broader context with other known congeners to demonstrate the variability of the diphosphanaphthalene scaffolding's bonding patterns. Three principal modes of interaction of the phosphorus moieties were observed in the series: bonding, bridging, and repulsive, resulting respectively in none, moderate, and substantial crowding and distortions. The unexpected dimeric diphosphaacenaphthene anion has been obtained from disproportionative hydrolysis of Nap(PCl(2))(2) (Nap = naphthalene-1,8-diyl).     

Direct synthesis of the 1,2,3-[C6H4P...P...P]- anion, isoelectronic with the indenyl anion [C6H4CH...CH...CH]-

The two products obtained from the reaction of 1,2-(PH(2))(2)C(6)H(4) with the mixed-metal base (n)BuLi-Sb(NMe(2))(3) in the presence of 12-crown-4, [Li(12-crown-4)(2)]+[C(6)H(4)P(3)]- (1) and {[Li(12-crown-4)(2)]+}3[Sb(11)]3- (2), represent thermodynamic sinks in which P-P and Sb-Sb bonding are maximized at the expense of P-Sb bonding, providing access to the 1,2,3-[C(6)H(4)P(3)]- phospholide anion.     

Structural changes, P-P bond energies, and homolytic dissociation enthalpies of substituted diphosphines from quantum mechanical calculations

The molecular structures of the diphosphines P(2)[CH(SiH(3))(2)](4), P(2)[C(SiH(3))(3)](4), P(2)[SiH(CH(3))(2)](4), and P(2)[Si(CH(3))(3)](4) and the corresponding radicals P[CH(SiH(3))(2)](2), P[C(SiH(3))(3)](2), P[SiH(CH(3))(2)](2), and P[Si(CH(3))(3)](2) were predicted by theoretical quantum chemical calculations at the HF/3-21G*, B3LYP/3-21G*, and MP2/6-31+G* levels. The conformational analyses of all structures found the gauche conformers of the diphosphines with C(2) symmetry to be the most stable. The most stable conformers of the phosphido radicals were also found to possess C(2) symmetry. The structural changes upon dissociation allow the release of some of the energy stored in the substituents and therefore contribute to the decrease of the P-P bond dissociation energy. The P-P bond dissociation enthalpies at 298 K in the compounds studied were calculated to vary from -11.4 kJ mol(-1) (P(2)[C(SiH(3))(3)](4)) to 179.0 kJ mol(-1) (P(2)[SiH(CH(3))(2)](4)) at the B3LYP/3-21G* level. The MP2/6-31+G* calculations predict them to be in the range of 52.8-207.9 kJ mol(-1). All the values are corrected for basis set superposition error. The P-P bond energy defined by applying a mechanical analogy of the flexible substituents connected by a spring shows less variation, between 191.3 and 222.6 kJ mol(-1) at the B3LYP/3-21G level and between 225.6 and 290.4 kJ mol(-1) at the MP2/6-31+G* level. Its average value can be used to estimate bond dissociation energies from the energetics of structural relaxation.     

Cu(I) and Pb(II) complexes containing new tris(7-naphthyridyl)methane derivatives: synthesis, structures, spectroscopy and geometric conversion

Two novel facial-capping tris-naphthyridyl compounds, 2-chloro-5-methyl-7-((2,4-dimethyl-1,8-naphthyridin-7(1H)-ylidene)(2,4-dimethyl-1,8-naphthyridin-7-yl))methyl-1,8-naphthyridine (L(1)) and 2-chloro-7-((2-methyl-1,8-naphthyridin-7(1H)-ylidene)(2-methyl-1,8-naphthyridin-7-yl))methyl-1,8-naphthyridine (L(2)), as well as their Cu(i) and Pb(ii) complexes, [CuL(a)(PPh(3))]BF(4) (1) (PPh(3) = triphenylphosphine, L(a) = bis(2,4-dimethyl-1,8-naphthyridin-7-yl)(2-chloro-5-methyl-1,8-naphthyridin-7-yl)methane), [CuL(b)(PPh(3))]BF(4) (2) (L(b) = bis(2-methyl-1,8-naphthyridin-7-yl)(2-chloro-1,8-naphthyridin-7-yl)methane), [Pb(OL(a))(NO(3))(2)] (3) (OL(a) = bis(2,4-dimethyl-1,8-naphthyridin-7-yl)(2-chloro-5-methyl-1,8-naphthyridin-7-yl)methanol) and [Pb(L(b))(2)][Pb(CH(3)OH)(NO(3))(4)] (4), have been synthesized and characterized by X-ray diffraction analysis, MS, NMR and elemental analysis. The structural investigations revealed that the transfer of the H-atom at the central carbon to an adjacent naphthyridine-N atom affords L(1) and L(2) possessing large conjugated architectures, and the central carbon atoms adopt the sp(2) hybridized bonding mode. The reversible hydrogen transfer and a geometric configuration conversion from sp(2) to sp(3) of the central carbon atom were observed when Pb(II) and Cu(I) were coordinated to L(1) or L(2). The molecular energy changes accompanying the hydrogen migration and titration of H(+) to different receptor-N at L(1) were calculated by density functional theory (DFT) at the SCRF-B3LYP/6-311++G(d,p) level in a CH(2)Cl(2) solution, and the observed lowest-energy absorption and emission for L(1) and L(2) can be tentatively assigned to an intramolecular charge transfer (ICT) transition in nature.     

Insignificance of P-H...P hydrogen bonding: structural chemistry of neutral and protonated 1,8-di(phosphinyl)naphthalene

While there is extensive information on 1,8-di(amino)naphthalene (i.e., the parent compound of the "proton sponge" series), the corresponding phosphorus compound has not been described. A high-yield synthesis of 1,8-di(phosphinyl)naphthalene (9) and the 1-naphthylphosphine reference compound (4) is now reported. Thermal decomposition of 9 leads to intramolecular dehydrogenative P-P coupling to afford 1,2-dihydro-1,2-diphosphaacenaphthene (10). Protonation of 9 and 4 with CF(3)SO(3)H gives quantitative yields of the monophosphonium salts 11 and 5, respectively. With excess acid and traces of moisture, the hydronium salt [C(10)H(6)(PH(2))(PH(3))](+)[H(3)O](+)2[CF(3)SO(3)](-) (13) is obtained. The structures of 9, 11, and 13 have been determined. Molecules of 9 have a planar naphthalene skeleton, C(10)H(6)P(2), with the two -PH(2) groups in a transoid conformation. The molecules form loose dimers in the crystal, the individual chiral enantiomers of which are related by a center of inversion. In contrast to the situation for the amino analogue, and despite the proximity of the two -PH(2) functions, there is no intra- or intermolecular hydrogen bonding. Solutions of 9 (in CD(2)Cl(2)) show equivalent P-bound hydrogen atoms due to conformational fluctionality. By analysis of the ABCD(2)XX'D'(2)C'B'A' spin system, it was shown that, in 9, there are strong through-space pericouplings [(n)J(P(X)P(X)(')) = 221.6 Hz, (n)J(P(X)H(D)(')) = 31.7 Hz, (n)J(H(D)H(D)(')) = 3.9 Hz]. In the cations of 11, the C(10)H(6)P(2) skeleton is also planar (by C(s) symmetry), with the -PH(2) and -PH(3)(+) groups in a conformation which rules out any P-H...P hydrogen bonding. The hydronium cation and the two triflate anions in 13 are associated into an anionic network through extensive hydrogen bonding surrounding stacks of the phosphonium cations. In solution, the cations of 11 and 13 show separate (31)P resonances for the two phosphorus atoms with fully resolved (1)J(PH) couplings, which indicate that there is no intra- or intercationic proton exchange. By contrast, the NMR spectra of solutions of [C(10)H(6)(NH(2))(NH(3))](+)X(-) salts show proton scrambling equilibrating all five N-bound hydrogen atoms, and in the crystal, the conformations of the cations feature intramolecular N-H...N hydrogen bonding.     

Stable diplatinum complexes with functional thiolato bridges from dialkylation of [Pt2(mu-S)2(P-P)2] [P-P=2 x PPh3, Ph2P(CH2)3PPh2

The normally robust monoalkylated complexes [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) can be activated towards further alkylation. Dialkylated complexes [Pt(2)(mu-SR)(2)(P-P)(2)](2+) (P-P=2 x PPh(3), Ph(2)P(CH(2))(3)PPh(2)) can be stabilized and isolated by the use of electron-rich and aromatic halogenated substituents R [e.g. 3-(2-bromoethyl)indole and 2-bromo-4'-phenylacetophenone] and 1,3-bis(diphenylphosphino)propane [Ph(2)P(CH(2))(3)PPh(2) or dppp] which enhances the nucleophilicity of the {Pt(2)(mu-S)(2)} core. This strategy led to the activation of [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) towards R-X as well as isolation and crystallographic elucidation of [Pt(2)(mu-SC(10)H(10)N)(2)(PPh(3))(4)](PF(6))(2) (2a), [Pt(2)(mu-SCH(2)C(O)C(6)H(4)C(6)H(5))(2)(PPh(3))(4)](PF(6))(2) (2b), and a range of functionalized-thiolato bridged complexes such as [Pt(2)(mu-SR)(2)(dppp)(2)](PF(6))(2) [R= -CH(2)C(6)H(5) (8a), -CH(2)CHCH(2) (8b) and -CH(2)CN (8c)]. The stepwise alkylation process is conveniently monitored by Electrospray Ionisation Mass Spectrometry, allowing for a direct qualitative comparison of the nucleophilicity of [Pt(2)(mu-S)(2)(P-P)(2)], thereby guiding the bench-top synthesis of some products observed spectroscopically.     

Behavior of neutral phosphido derivatives of platinum and palladium toward silver centers

The reaction of the neutral binuclear complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(phen)] (phen = 1,10-phenanthroline, R(F) = C(6)F(5); M = Pt, 1; M = Pd, 2) with AgClO(4) or [Ag(OClO(3))(PPh(3))] affords the trinuclear complexes [AgPt(2)(μ-PPh(2))(2)(R(F))(2)(phen)(OClO(3))] (7a) or [AgPtM(μ-PPh(2))(2)(R(F))(2)(phen)(PPh(3))][ClO(4)] (M = Pt, 8; M = Pd, 9), which display an "open-book" type structure and two (7a) or one (8, 9) Pt-Ag bonds. The neutral diphosphine complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(P-P)] (P-P = 1,2-bis(diphenylphosphino)methane, dppm, M = Pt, 3; M = Pd, 4; P-P = 1,2-bis(diphenylphosphino)ethane, dppe, M = Pt, 5; M = Pd, 6) react with AgClO(4) or [Ag(OClO(3))(PPh(3))], and the nature of the resulting complexes is dependent on both M and the diphosphine. The dppm Pt-Pt complex 3 reacts with [Ag(OClO(3))(PPh(3))], affording a silver adduct 10 in which the Ag atom interacts with the Pt atoms, while the dppm Pt-Pd complex 4 reacts with [Ag(OClO(3))(PPh(3))], forming a 1:1 mixture of [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(dppm)] (11), in which the silver atom is connected to the Pt-Pd moiety through Pd-(μ-PPh(2))-Ag and Ag-P(k(1)-dppm) interactions, and [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(PPh(3))(2)][ClO(4)] (12). The reaction of complex 4 with AgClO(4) gives the trinuclear derivative 11 as the only product. Complex 11 shows a dynamic process in solution in which the silver atom interacts alternatively with both Pd-μPPh(2) bonds. When P-P is dppe, both complexes 5 and 6 react with AgClO(4) or [Ag(OClO(3))(PPh(3))], forming the saturated complexes [(PPh(2)C(6)F(5))(R(F))Pt(μ-PPh(2))(μ-OH)M(dppe)][ClO(4)] (M = Pt, 13; Pd, 14), which are the result of an oxidation followed by a PPh(2)/C(6)F(5) reductive coupling. Finally, the oxidation of trinuclear derivatives [(R(F))(2)Pt(II)(μ-PPh(2))(2)Pt(II)(μ-PPh(2))(2)Pt(II)L(2)] (L(2) = phen, 15; L = PPh(3), 16) by AgClO(4) results in the formation of the unsaturated 46 VEC complexes [(R(F))(2)Pt(III)(μ-PPh(2))(2)Pt(III)(μ-PPh(2))(2)Pt(II)L(2)][ClO(4)](2) (17 and 18, respectively) which display Pt(III)-Pt(III) bonds.     

Formation of [PtPd(2)(mu(3)-X)(2)(P-P)(dppmX)(2)](2+) (X = S, Se; P-P = dppe, 2 x PPh(3)) aggregates through activation of the chalcogen-rich [PtX(4)] ring by a Pd(I)-Pd(I) bond

Redox addition of the Pd-Pd bond in [Pd(2)Cl(2)(dppm)(2)] across S-S or Se-Se bond in [Pt(X(4)-kappa(2)X(1),X(4))(P-P)] (X = S, Se; P-P = dppe or 2 x PPh(3); dppm = bis(diphenylphosphino)methane, dppe = bis(diphenylphosphino)ethane) leads to the isolation of [PtPd(2)(mu(3)-X)(2)(P-P)(dppmX-kappa(2)X,P(4))(2)](2+) and represents an atom-economy process that converts chalcogen-rich complexes to heterometallic chalcogenide aggregates. Activation of the [PtX(4)] ring is achieved by tetrachalcogenide reduction and dual oxidation of palladium and phosphine.     

Synthesis of blue imino(pentafluorophenyl)phosphane

The reaction of AgC(6)F(5) with monomeric iminophosphanes of Mes*-N═P-X (X = Cl, I) in CH(2)Cl(2) at ambient temperature gives imino(pentafluorophenyl)phosphane, Mes*N═P(C(6)F(5)) (1), in almost quantitative yield (96%), which could be isolated as a highly viscous blue oil. The same reaction with LiC(6)F(5) results in the formation of imino(amino)phosphane (C(6)F(5))(2)P-N(Mes*)-P═NMes* (2) (yield 93%). In the second series of experiments the analogous reaction of MC(6)F(5) (M = Ag, Li) with dimeric [Cl-P(μ-N-Dipp)](2) was studied, leading to the formation of [R-P(μ-N-Dipp)](2) (R = C(6)F(5)) (3) for M = Ag, while only decomposition products such as P(C(6)F(5))(3) were observed in the reaction with the Li salt. Highly labile Mes*-N═P-C(6)F(5) (1) decomposes at ambient temperatures, forming among other products the diphosphane (C(6)F(5))(2)P-P(C(6)F(5))(2) (4). Reaction of 1 with Fe(2)(CO)(9) yields the iron carbonyl complexes Mes*-N═P(C(6)F(5))·Fe(CO)(4) (5) and [Mes*-N═P(C(6)F(5))](2)·Fe(CO)(3) (6). The structure, bonding, and potential energy surface are discussed on the basis of B3LYP/6-31G(d,p) computations. According to time-dependent B3LYP calculations, the blue color of 1 arises from an n → π* electronic transition.     

Syntheses and structures of the first terminal phosphanylphosphido complex of hafnium [Cp2Hf(Cl){η(1)-(Me3Si)P-P(NEt2)2}] and the first zirconocene-phosphanylphosphinidene dimer [Cp2Zr{μ(2)-P-P(NEt2)2}2ZrCp2

Reactions of (Et(2)N)(2)P-P(SiMe(3))Li with [Cp(2)MCl(2)] (M = Zr, Hf) in toluene or pentane yield the related terminal phosphanylphosphido complexes [Cp(2)M(Cl){η(1)-(Me(3)Si)P-P(NEt(2))(2)}]. The solid state structure of [Cp(2)Hf(Cl){η(1)-(Me(3)Si)P-P(NEt(2))(2)}] was established by single crystal X-ray diffraction. The reaction of (Et(2)N)(2)P-P(SiMe(3))Li with [Cp(2)ZrCl(2)] in THF or DME solutions leads to the formation of deep red crystals of the first neutral diamagnetic zirconocene-phosphanylphosphinidene dimer [Cp(2)Zr{μ(2)-P-P(NEt(2))(2)}(2)ZrCp(2)]. The molecular structure of this compound was confirmed by X-ray diffraction. The reactions of (R(2)N)(2)P-P(SiMe(3))Li with [CpZrCl(3)] yield the related tetraphosphetanes R(2)NP(μ(2)-PSiMe(3))(2)PNR(2), which apparently are formed as a result of a transfer of NR(2) groups from a P atom to the Zr atom.     

Copper(II) carboxylate dimers prepared from ligands designed to form a robust π···π stacking synthon: supramolecular structures and molecular properties

The reactions of bifunctional carboxylate ligands (1,8-naphthalimido)propanoate, (L(C2)(-)), (1,8-naphthalimido)ethanoate, (L(C1)(-)), and (1,8-naphthalimido)benzoate, (L(C4)(-)) with Cu(2)(O(2)CCH(3))(4)(H(2)O)(2) in methanol or ethanol at room temperature lead to the formation of novel dimeric [Cu(2)(L(C2))(4)(MeOH)(2)] (1), [Cu(2)(L(C1))(4)(MeOH)(2)]·2(CH(2)Cl(2)) (2), [Cu(2)(L(C4))(4)(EtOH)(2)]·2(CH(2)Cl(2)) (3) complexes. When the reaction of L(C1)(-) with Cu(2)(O(2)CCH(3))(4)(H(2)O)(2) was carried out at -20 °C in the presence of pyridine, [Cu(2)(L(C1))(4)(py)(4)]·2(CH(2)Cl(2)) (4) was produced. At the core of complexes 1-3 lies the square Cu(2)(O(2)CR)(4) "paddlewheel" secondary building unit, where the two copper centers have a nearly square pyramidal geometry with methanol or ethanol occupying the axial coordination sites. Complex 4 contains a different type of dimeric core generated by two κ(1)-bridging carboxylate ligands. Additionally, two terminal carboxylates and four trans situated pyridine molecules complete the coordination environment of the five-coordinate copper(II) centers. In all four compounds, robust π···π stacking interactions of the naphthalimide rings organize the dimeric units into two-dimensional sheets. These two-dimensional networks are organized into a three-dimensional architecture by two different noncovalent interactions: strong π···π stacking of the naphthalimide rings (also the pyridine rings for 4) in 1, 3, and 4, and intermolecular hydrogen bonding of the coordinated methanol or ethanol molecules in 1-3. Magnetic measurements show that the copper ions in the paddlewheel complexes 1-3 are strongly antiferromagnetically coupled with -J values ranging from 255 to 325 cm(-1), whereas the copper ions in 4 are only weakly antiferromagnetically coupled. Typical values of the zero-field splitting parameter D were found from EPR studies of 1-3and the related known complexes [Cu(2)(L(C2))(4)(py)(2)]·2(CH(2)Cl(2))·(CH(3)OH), [Cu(2)(L(C3))(4)(py)(2)]·2(CH(2)Cl(2)) and [Cu(2)(L(C3))(4)(bipy)]·(CH(3)OH)(2)·(CH(2)Cl(2))(3.37) (L(C3)(-) = (1,8-naphthalimido)butanoate)), while its abnormal magnitude in [Cu(2)(L(C2))(4)(bipy)] was qualitatively rationalized by structural analysis and DFT calculations.     

Synthesis and characterization of new π‐conjugated polymers containing 1,8‐naphthyridine in the main chain: Role of the 1,8‐naphthyridine unit in π‐conjugated polymers

Alternating π‐conjugated copolymers of 1,8‐naphthyridine‐2,6‐diyl ( 1,8‐Nap ) with 9,9‐dioctylfluorene‐2,7‐diyl ( P(Flu‐Ph‐1,8‐Nap) ) and 2,5‐didodecyloxy‐1,4‐phenylene ( P(ROPh‐Ph‐1,8‐Nap) ) have been synthesized by Pd‐catalyzed organometallic polycondensation. The copolymers showed UV‐vis absorption peaks at around 390 nm in o‐dichlorobenzene. The polymers were photoluminescent both in o‐dichlorobenzene and in the solid state. In o‐dichlorobenzene, the emission peaks of P(Flu‐Ph‐1,8‐Nap) and P(ROPh‐Ph‐1.,8‐Nap) appeared at λ_EM = 440 and 471 nm, with quantum yields of 87% and 66%, respectively. Electrochemical data revealed that 1,8‐Nap behaved as a typical electron‐accepting unit. When P(Flu‐Ph‐1,8‐Nap) was treated with 10‐camphorsulfonic acid, the emission peak shifted to λ_EM = 598 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Reactivity of (Pentafluorophenyl)platinate(II) Complexes with Bridging 1,8-Naphthyridine (napy) and X Ligands (X = C(6)F(5), OH, Cl, Br, I, SPh). Crystal Structure of [NBu(4)][Pt(2)(&mgr;-napy)(&mgr;-OH)(C(6)F(5))(4)].CHCl(3)

By reaction of [NBu(4)](2)[Pt(2)(&mgr;-C(6)F(5))(2)(C(6)F(5))(4)] with 1,8-naphthyridine (napy), [NBu(4)][Pt(C(6)F(5))(3)(napy)] (1) is obtained. This compound reacts with cis-[Pt(C(6)F(5))(2)(THF)(2)] to give the dinuclear derivative [NBu(4)][Pt(2)(&mgr;-napy)(&mgr;-C(6)F(5))(C(6)F(5))(4)] (2). The reaction of several HX species with 2 results in the substitution of the bridging C(6)F(5) by other ligands (X) such as OH (3), Cl (4), Br (5), I (6), and SPh (7), maintaining in all cases the naphthyridine bridging ligand. The structure of 3 was determined by single-crystal X-ray diffraction. The compound crystallizes in the monoclinic system, space group P2(1)/n, with a = 12.022(2) ?, b = 16.677(3) ?, c = 27.154(5) ?, beta = 98.58(3) degrees, V = 5383.2(16) ?(3), and Z = 4. The structure was refined to residuals of R = 0.0488 and R(w) = 0.0547. The complex consists of two square-planar platinum(II) fragments sharing a naphthyridine and OH bridging ligands, which are in cis positions. The short Pt-Pt distance [3.008(1) ?] seems to be a consequence of the bridging ligands.     

Formation of a phosphorus-phosphorus bond by successive one-electron reductions of a two-phosphinines-containing macrocycle: crystal structures, EPR, and DFT investigations.

Chemical and electrochemical reductions of the macrocycle 1 lead to the formation of a radical monoanion anion [1](*)(-) whose structure has been studied by EPR in liquid and frozen solutions. In accord with experimental (31)P hyperfine tensors, DFT calculations indicate that, in this species, the unpaired electron is mainly localized in a bonding sigma P-P orbital. Clearly, a one-electron bond (2.763 A) was formed between two phosphorus atoms which, in the neutral molecule, were 3.256 A apart (crystal structure). A subsequent reduction of this radical anion gives rise to the dianion [1](2)(-) which could be crystallized by using, in the presence of cryptand, Na naphthalenide as a reductant agent. As shown by the crystal structure, in [1](2)(-), the two phosphinine moieties adopt a phosphacyclohexadienyl structure and are linked by a P-P bond whose length (2.305(2) A) is only slightly longer than a usual P-P bond. When the phosphinine moieties are not incorporated in a macrocycle, no formation of any one-electron P-P bond is observed: thus, one-electron reduction of 3 with Na naphthalenide leads to the EPR spectrum of the ion pair [3](*)(-) Na(+); however, at high concentration, these ion pairs dimerize, and, as shown by the crystal structure of [(3)(2)](2)(-)[(Na(THF)(2))(2)](2+) a P-P bond is formed (2.286(2) A) between two phosphinine rings which adopt a boat-type conformation, the whole edifice being stabilized by two carbon-sodium-phosphorus bridges.     

Molybdenum and tungsten complexes of sulfene (thioformaldehyde S,S-dioxide)

Propionitrile complexes fac-[M(CO)(3)(P-P)(NCEt)] (M = Mo (3), W (4); P-P = Ph(2)PCH(2)PPh(2) (a), Ph(2)PC(2)H(4)PPh(2) (b), Ph(2)PC(3)H(6)PPh(2) (c), (S,S)-Ph(2)PCHMeCHMePPh(2) (d), Fe(C(5)H(4)PPh(2))(2) (e)) were synthesized from [M(CO)(3)(NCEt)(3)] and the corresponding diphosphine. Reactions of 3 and 4 with sulfur dioxide initially gave complexes fac-[M(CO)(3)(P-P)(eta(2)-SO(2))] (M = Mo (5), W (6)), which slowly isomerized to mer-[M(CO)(3)(P-P)(eta(1)-SO(2))] (M = Mo (7), W (8)). The structures of 7b and 8b were determined by X-ray crystallography. Both compounds are isostructural (monoclinic, space group P2(1)/n (No. 14)) with almost identical unit cell dimensions (7b, a = 14.511(5) A, b = 12.797(2) A, c = 16.476(6) A, beta = 115.92(2); 8b, a = 14.478(8) A, b = 12.794(3) A, c = 16.442(9) A, beta = 116.01(2)) and molecular geometries. Treatment of either fac-[M(CO)(3)(P-P)(eta(2)-SO(2))] or mer-[M(CO)(3)(P-P)(eta(1)-SO(2))] with diazomethane yielded the sulfene complexes mer-[M(CO)(3)(P-P)(eta(2)-CH(2)SO(2))] (M = Mo (9), W (10)). The structure of 10a was determined crystallographically: monoclinic, space group P2(1)/n (No. 14), a = 11.719(2) A, b = 17.392(4) A, c = 13.441(3) A, beta = 95.58(2). The tungsten atom resides in the center of a distorted pentagonal bipyramid. The sulfene ligand occupies two adjacent equatorial sites with the bond distances W-C, 2.322(13) A, W-S, 2.353(3) A, and S-C, 1.721(12) A. The latter equals the S-C single bond distance in thiirane S,S-dioxide, indicating a high degree of charge density transfer into the LUMO of the sulfene ligand.     

Syntheses and characterization of copper(II) carboxylate dimers formed from enantiopure ligands containing a strong π···π stacking synthon: enantioselective single-crystal to single-crystal gas/solid-mediated transformations

Tri- and tetrafunctional enantiopure ligands have been prepared from 1,8-naphthalic anhydride and the amino acids L-alanine, D-phenylglycine, and L-asparagine to produce (S)-2-(1,8-naphthalimido)propanoic acid (HL(ala)), (R)-2-(1,8-naphthalimido)-2-phenylacetic acid (HL(phg)), and (S)-4-amino-2-(1,8 naphthalimido)-4-oxobutanoic acid (HL(asn)), respectively. Reactions of L(ala)(-) with copper(II) acetate under a variety of solvent conditions has led to the formation and characterization by X-ray crystallography of three similar copper(II) paddlewheel complexes with different axial ligands, [Cu(2)(L(ala))(4)(THF)(2)] (1), [Cu(2)(L(ala))(4)(HL(ala))] (2), and [Cu(2)(L(ala))(4)(py)(THF)] (3). A similar reaction using THF and L(phg)(-) leads to the formation of [Cu(2)(L(phg))(4)(THF)(2)] (4). With the exception of a disordered component in the structure of 4, the naphthalimide groups in all of these compounds are arranged on the same side of the square, central paddlewheel unit, forming what is known as the chiral crown configuration. A variety of π···π stacking interactions of the 1,8-naphthalimide groups organize all of these complexes into supramolecular structures. The addition of the amide group functionality in the L(asn)(-) ligand leads to the formation of tetrameric [Cu(4)(L(asn))(8)(py)(MeOH)] (5), where reciprocal axial coordination of one of the amide carbonyl oxygen atoms between two dimers leads to the tetramer. Extensive supramolecular interactions in 5, mainly the π···π stacking interactions of the 1,8-naphthalimide supramolecular synthon, support an open three-dimensional structure containing large pores filled with solvent. When crystals of [Cu(4)(L(asn))(8)(py)(MeOH)] are exposed to (S)-ethyl lactate vapor, the coordinated methanol molecule is replaced by (S)-ethyl lactate, bonding to the copper ion through the carbonyl oxygen, yielding [Cu(4)(L(asn))(8)(py)((S)-ethyl lactate)] (6) without a loss of crystallinity. With the exception of the replacement of the one axial ligand, the molecular structures of 5 and 6 are very similar. In a similar experiment of 5 with vapors of (R)-ethyl lactate, again a change occurs without a loss of crystallinity, but in this case the (R)-ethyl lactate displaces only slightly more than half of the axial methanol molecules forming [Cu(4)(L(asn))(8)(py){((R)-ethyl lactate)(0.58)(MeOH)(0.42)}] (7). Importantly, in 7, the (R)-ethyl lactate coordinates through the hydroxyl group. When crystals of [Cu(4)(L(asn))(8)(py)(MeOH)] are exposed to vapors of racemic ethyl lactate, the coordinated methanol molecule is displaced without a loss of crystallinity exclusively by (S)-ethyl lactate, yielding a new form of the tetramer [Cu(4)(L(asn))(8)(py)((S)-ethyl lactate)], in which the ethyl lactate in the pocket bonds to the copper(II) ion through the carbonyl oxygen as with 6. Exposure of [Cu(4)(L(asn))(8)(py){((R)-ethyl lactate)(0.58)(MeOH)(0.42)}] to racemic ethyl lactate yields a third form of [Cu(4)(L(asn))(8)(py)((S)-ethyl lactate)], where the three forms of [Cu(4)(L(asn))(8)(py)((S)-ethyl lactate)] have differences in the number of ordered (S)-ethyl lactate molecules located in the interstitial sites. These results demonstrate enantioselective bonding to a metal center in the chiral pocket of both 5 and 7 during single-crystal to single-crystal gas/solid-mediated exchange reactions.     

Orbital symmetry as a tool for understanding the bonding in Krossing's cation

The geometric and electronic structure of Krossing's cation, Ag(eta(2)-P(4))(2)(+), which shows an unexpected planar coordination environment at the metal center and D(2)(h) symmetry both in solution and in the solid state, have been investigated using density functional theory and orbital-symmetry-based energy decomposition. The analysis reveals that the contribution from electrostatic interactions to the bond energy is greater than that of orbital interactions. Partitioning of the latter term into the irreducible representations shows that, in addition to the 5s orbital, 5p orbitals of silver act as acceptor orbitals for electron donation from sigma(P-P) orbitals (a(1)(g), b(1)(u)) and n(P) orbitals (b(3)(u)). Back-donation from the 4d(10) closed shell of Ag into sigma orbitals of the pnictogen cages (b(2)(g)) is also important. However, this contribution is shown not to determine the D(2)(h) structure, contradicting conclusions from the pioneering study of the title cation (J. Am. Chem.Soc. 2001, 123, 4603). The contributions from the irreducible representations to the stabilizing orbital interactions in the D(2)(h) structure and in its D(2)(d)-symmetric conformer are analogous, indicating that the planar coordination environment at the metal center in Ag(eta(2)-P(4))(2)(+) is induced by intermolecular rather than by intramolecular interactions. Because ethylene coordination to a metal ion is an elementary reaction step in industrial processes, the bonding in Ag(C(2)H(4))(2)(+) has been analyzed as well and compared to that in Krossing's cation. Surprisingly, similar contributions to the bond energies and an involvement of metal 4d and 5p orbitals have been found, whereas a recent atoms in molecules analysis suggested that the metal-ligand interactions in silver(I) olefin complexes fundamentally differ from those in tetrahedro P(4) complexes. The only qualitative difference between the bonding patterns in Ag(eta(2)-P(4))(2)(+) and Ag(C(2)H(4))(2)(+) is the negligible energy contribution from the b(3)(u) irreducible representation in the ethylene complex because a respective symmetry-adapted linear combination of ligand orbitals is not available.     

Synthesis, structures and photophysical properties of luminescent copper(I) and platinum(II) complexes with a flexible naphthyridine-phosphine ligand

Condensation of Ph(2)PH and paraformaldehyde with 2-amino-7-methyl-1,8-naphthyridine gave the new flexible tridentate ligand 2-[N-(diphenylphosphino)methyl]amino-7-methyl-1,8-naphthyridine (L). Reaction of L with [Cu(CH(3)CN)(4)]BF(4) and/or different ancillary ligands in dichloromethane afforded N,P chelating or bridging luminescent complexes [(L)(2)Cu(2)](BF(4))(2), [(micro-L)(2)Cu(2)(PPh(3))(2)](BF(4))(2) and [(L)Cu(CNN)]BF(4) (CNN = 6-phenyl-2,2'-bipyridine), respectively. Complexes [(L)(2)Pt]Cl(2), [(L)(2)Pt](ClO(4))(2) and [(L)Pt(CNC)]Cl (CNC = 2,6-biphenylpyridine) were obtained from the reactions of Pt(SMe(2))(2)Cl(2) or (CNC)Pt(DMSO)Cl with L. The crystal structures and photophysical properties of the complexes are presented.     

Supramolecular gold(I) thiobarbiturate chemistry: combining aurophilicity and hydrogen bonding to make polymers,sheets, and networks

The cooperative forces of aurophilic and hydrogen bonding have been used in the self-assembly of phosphine or diphosphine complexes of gold(I) with the thiolate ligands derived from 2-thiobarbituric acid, SC(4)H(4)N(2)O(2), by single or double deprotonation. The reaction of the corresponding gold(I) trifluoroacetate complex with SC(4)H(4)N(2)O(2) gave the complexes [Au(SC(4)H(3)N(2)O(2))(PPh(3))], 1, [(AuSC(4)H(3)N(2)O(2))(2)(micro-LL)], with LL = Ph(2)PCH(2)PPh(2), 2a, Ph(2)P(CH(2))(3)PPh(2), 2b, or Ph(2)PCH=CHPPh(2), 2c, or the cyclic complex [Au(2)(micro-SC(4)H(2)N(2)O(2))(micro-Ph(2)PCH(2)CH(2)PPh(2))], 3. In the case with LL = Ph(2)P(CH(2))(6)PPh(2), the reaction led to loss of the diphosphine ligand to give [Au(6)(SC(4)H(3)N(2)O(2))(6)], 4, a hexagold(I) cluster complex in which each gold(I) center has trigonal AuS(2)N coordination. Structure determinations show that 1 has no aurophilic bonding, 2b, 3, and 4 have intramolecular aurophilic bonding, and 2c has intermolecular aurophilic bonding that contributes to the supramolecular structure. All the complexes undergo supramolecular association through strong NH...O and/or OH...N hydrogen bonding, and complex 3 also takes part in CH...O hydrogen bonding. The supramolecular association leads to formation of interesting polymer, sheet, or network structures, and 4 has a highly porous and stable lattice structure.     

New mode of sterically imposed phosphorus hyperco-ordination

The sterically imposed electronic interaction in Nap (POCl2)(PCl4) (Nap = naphthalene-1,8-diyl) results in hyperco-ordination of the P atom by the O donor in the bridging position between the two peri-substituents.