Application of Dicyanohexasulfane for the Synthesis of cyclo-Nonasulfur. Crystal and Molecular Structures of S(6)(CN)(2) and of alpha-S(9)(1)

A novel synthesis for dichlorotetrasulfane is reported. Careful chlorination of cyclo-hexasulfur yields S(4)Cl(2) (besides S(2)Cl(2)), which is used to prepare S(6)(CN)(2) by reaction with Hg(SCN)(2). An X-ray diffraction analysis of S(6)(CN)(2) shows nonhelical chainlike molecules with the following molecular parameters: SS bond lengths 203.4-207.4 pm, SSS valence angles 104.95-105.96 degrees, SS torsion angles 81.2-94.5 degrees (motif: + + - - +). The chain-terminating SCN groups exhibit a parallel orientation within the molecules and are antiparallel in neighboring molecules. S(6)(CN)(2) reacts with titanocene pentasulfide to give S(9) and titanocene diisothiocyanate. alpha-S(9) was obtained as single crystals, the structure of which was determined by X-ray diffraction. The two independent molecules occupy sites of C(1) symmetry, but the molecular symmetry is approximately C(2), in agreement with predictions by density functional and ab-initio MO calculations. Molecular parameters: bond lengths 203.2-206.9 pm, valence angles 103.7-109.7 degrees, torsion angles 59.7-115.6 degrees (motif: + + - - + + - + -). The average SS bond lengths in S(6)(CN)(2) and alpha-S(9) agree with the single-bond value of 205 pm as observed in H(2)S(2) and in alpha-S(8).     

An investigation of the chromium oxidation state of a monoanionic chromium tris(catecholate) complex by X-ray absorption and EPR spectroscopies

The well-known monoanionic Cr tris(3,5-di-tert-butylcatecholato) complex, [Cr(DTBC)3]-, has been studied by X-ray absorption spectroscopy. The multiple-scattering fit to the XAFS gave good correlation (R = 19.8%) and good values for all of the bond lengths, angles, and Debye-Waller factors. The principal bond lengths and angles around the metal center (Cr-O, 1.96 A; O-C, 1.28 A; O-Cr-O, 81.8 degrees; Cr-O-C, 113.3 degrees) were most consistent with the XRD structure for [Cr(X4C6O2)3]- (X = Cl, Br), compared to those in other oxidation states, [Cr(DTBC)3], [Cr(Cl4C6O2)3], and [Cr(O2C6H4)3]3-. The XANES spectrum shows the main K edge at 6003.3 eV and a preedge peak at 5992.9 eV, which is approximately 8% of the intensity of the main K edge. The XANES data were compared to those for Cr-ehba complexes (ehbaH2 = 2-ethyl-2-hydroxybutanoic acid) of known oxidation states (III, IV, and V) and show, in conjunction with EPR spectroscopy and a reevaluation of XRD structures and theoretical calulations, that the complex is best described as a Cr(V) center with delocalization from the catechol ligands. The [Cr(catecholato)3]n+ (n = 1, 0) complexes have similar EPR spectroscopic and structural properties, respectively, to the 1- complex and are also best described as Cr(V) complexes. Such intermediates are important in the redox reactions of catechol(amine)s, and oxidized amino acids (e.g., DOPA), with carcinogenic Cr(VI) and may have relevance in Cr-induced cancers.     

Determination of the structures of antiinflammatory copper(II) dimers of indomethacin by multiple-scattering analyses of X-ray absorption fine structure data

Copper K-edge X-ray absorption spectroscopic (XAS) measurements were recorded for the veterinary antiinflammatory Cu(II) complexes of indomethacin (1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1H-indole-3-acetic acid = IndoH), of the general formula [Cu(2)(Indo)(4)L(2)] (L = N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), N-methylpyrrolidone (NMP), and water), and [Cu(2)(OAc)(4)(OH(2))(2)] at room temperature and 10 K. The bond lengths and bridging O-C-O angles of the dimeric Cu(II) cage (Cu(2)O(10)C(8)) obtained from the multiple-scattering (MS) fitting of the X-ray absorption fine structure (XAFS) using a centrosymmetric model of [Cu(2)(Indo)(4)(DMF)(2)] gave Cu.Cu = 2.62(2) A, mean Cu-O(Ac) = 1.95(2) A, Cu-O(L) = 2.15(2) A, bridging O-C-O = 125(1) degrees, Cu displacement from plane 0.19 A compared with the XRD data Cu.Cu = 2.630(1) A, mean Cu-O(Ac) = 1.959 A, Cu-O(L) = 2.143(5) A, bridging O-C-O angles = 123.2(5) degrees, Cu displacement from plane 0.20 A. The excellent agreement between the XAFS- and XRD-derived data allowed the structures of related [Cu(2)(Indo)(4)L(2)] (L = DMA, NMP) complexes to be determined. All display a similar Cu(2)O(10)C(8) coordination geometry, which is independent of the nature of the axial ligand. While XAFS analysis of [Cu(2)(Indo)(4)(OH(2))(2)] and [Cu(2)(OAc)(4)(OH(2))(2)] indicates a coordination geometry similar to that of [Cu(2)(Indo)(4)L(2)] (L = DMF, DMA, NMP), removal of symmetry restraints in the MS model is required to obtain axial bond lengths comparable to those derived in the XRD structures of the acetate complex. For the Indo complex, the fitted bond lengths with the lower symmetry model give a mean Cu-L(OH2) bond distance within experimental errors of the value for [Cu(2)(Indo)(4)(DMSO)(2)] (2.16(2) A) (XRD). The difficulty in refining the Cu-O(OH2) distance of [Cu(2)(OAc)(4)(OH(2))(2)] and [Cu(2)(Indo)(4)(OH(2))(2)] using a centrosymmetric MS model is attributed to a symmetry reduction due to hydrogen-bonding effects characteristic of the aqua adducts, as is observed in the XRD structure of the acetate complex.     

Structural and solid state 31P NMR studies of the four-coordinate copper(I) complexes [Cu(PPh3)3X] and [Cu(PPh3)3(CH3CN)]X

The tris(triphenylphosphine)copper(I) complexes [(PPh3)3CuX] for X = Cl (1), Br (2), I (3), ClO4 (4), BF4 (5), [(PPh3)3CuCl].CH3CN (1a), [Cu(PPh3)3(CH3CN)]X for X = ClO4 (6), BF4 (7), and [Cu(PPh3)3(CH3CN)]X.CH3CN for X = SiF5 (8), PF6 (9) have been studied by solid state 31P CP/MAS NMR spectroscopy together with single crystal X-ray diffraction for compounds (6)-(9), the latter completing the availability of crystal structure data for the series. Compounds (1)-(5) form an isomorphous series in space group P3 (a approximately 19, c approximately 11 A) with three independent molecules in the unit cell, all disposed about 3-fold symmetry axes. Average values (with estimated standard deviations) for the P-Cu-P, P-Cu-X bond angles and Cu-P bond lengths in compounds (1)-(3) are 110.1(6) degrees, 108.8(6) degrees and 2.354(8)A and 115.2(6) degrees, 102.8(9) degrees and 2.306(9)A for compounds (4) and (5). For the acetonitrile solvated compound (1a), the corresponding parameters are 115(4) degrees, 103(3) degrees and 2.309(3)A. The solid state 31P CP/MAS NMR quadrupole distortion parameters, dnu Cu, for (1)-(3) and (1a) are all less than 1 x 10(9) Hz2, despite the changes in donor properties of the halide in (1)-(3), and the coordination geometry of the P3CuX core in (1a). Change of anion to ClO4- and BF4- in compounds (4) and (5) results in a significant increase of dnu Cu to 4.4-5.2 10(9) Hz2 and 5.2-6.0 x 10(9) Hz2, respectively. Compounds (6) and (7) crystallise as isomorphous [Cu(PPh3)3(CH3CN)]X salts in space group Pbca, (a approximately 17.6, b approximately 22.3, c approximately 24.2 A), while compounds (8) and (9) crystallize as isomorphous acetonitrile solvated salts [Cu(PPh3)3(CH3CN)]X.CH3CN in space group P1(a approximately 10.5, b approximately 13.0, c approximately 19.5 A, alpha approximately 104, beta approximately 104, gamma approximately 94 degrees). The P3CuN angular geometries in all four compounds are distorted from tetrahedral symmetry with average P-Cu-P, P-Cu-N angles and Cu-P bond lengths of 115(4) degrees, 103(4) degrees and 2.32(1)A, with dnu Cu ranging between 1.3 and 2.5 x 10(9) Hz2. The solid state 29Si CP/MAS NMR spectrum of the pentafluorosilicate anion in compound (8) is also reported, affording 1J(29Si, 19F) = 146 Hz.     

Thermodynamics of forming water clusters at various temperatures and pressures by Gaussian-2, Gaussian-3, complete basis set-QB3, and complete basis set-APNO model chemistries; implications for atmospheric chemistry

The Gaussian-2, Gaussian-3, complete basis set- (CBS-) QB3, and CBS-APNO methods have been used to calculate Delta H degrees and Delta G degrees values for neutral clusters of water, (H(2)O)(n), where n = 2-6. The structures are similar to those determined from experiment and from previous high-level calculations. The thermodynamic calculations by the G2, G3, and CBS-APNO methods compare well against the estimated MP2(CBS) limit. The cyclic pentamer and hexamer structures release the most heat per hydrogen bond formed of any of the clusters. While the cage and prism forms of the hexamer are the lowest energy structures at very low temperatures, as temperature is increased the cyclic structure is favored. The free energies of cluster formation at different temperatures reveal interesting insights, the most striking being that the cyclic trimer, cyclic tetramer, and cyclic pentamer, like the dimer, should be detectable in the lower troposphere. We predict water dimer concentrations of 9 x 10(14) molecules/cm(3), water trimer concentrations of 2.6 x 10(12) molecules/cm(3), tetramer concentrations of approximately 5.8 x 10(11) molecules/cm(3), and pentamer concentrations of approximately 3.5 x 10(10) molecules/cm(3) in saturated air at 298 K. These results have important implications for understanding the gas-phase chemistry of the lower troposphere.     

Inter-string arrays of bimetallic assemblies with alternative Cu2+-Cl-Cu2+ and Cu-NC-M (M = Co3+, Fe+3, Cr+3) bridges: syntheses, crystal structure, and magnetic properties

Three bimetallic assemblies with alternate homometallic bridges through chloride ligands and heterometallic bridges through cyanide ligands of formula [(323)(2)Cu(2)(Cl)M(CN)(6)](n).2n(H(2)O), where 323 = N,N'-bis(3-aminopropyl)ethylenediamine and M = Co(3+) for 1, Fe(3+) for 2, and Cr(3+) for 3, were synthesized. They have been characterized structurally, analytically, spectroscopically, and magnetically. All three assemblies crystallize in the monoclinic system in the same space group P2(1)/n, with a = 11.642(2) A, b = 10.285(3) A, c = 13.622(2) A, beta = 95.69(3) degrees, V = 1623.1(6) A(3), and Z = 4 for 1; a = 11.681(4) A, b = 10.315(3) A, c = 13.567(5) A, beta = 95.62(3) degrees, V = 1626.8(9) A(3), Z = 4 for 2, and a = 11.782(4) A, b = 10.386(2) A, c = 13.755(4) A, beta = 95.51(3) degrees, V = 1657.4(8) A(3), Z = 4 for 3. Crystal structure analyses reveal that one-dimensional zigzag chains propagate in two different crystallographic directions (a and b) which are held together during the course of their propagation. All three assemblies have a homometallic Cu-Cl-Cu core in common. Assembly 1 exhibits metamagnetic behavior and shows weak antiferromagnetic interactions between Cu(2+) paramagnetic centers, through the chloride bridges. The Neel temperature, T(N), is 3.5 K, and the critical field is 4 T. In the presence of a magnetic field larger than 4 T, the local spin doublets of Cu(2+) in the assembly 1 remain in parallel arrangements. Assemblies 2 and 3 may be described as an alternative repetition of the antiferromagnetically coupled Cu-Cl-Cu fragment and ferromagnetically coupled Cu-CN-Fe(3+)/Cr(3+)fragment. The overall magnetic character of the strings in assemblies 2 and 3 are antiferromagnetic. Ferromagnetic interaction evidenced by the (Cu-CN-Fe(3+)/Cr(3+)) fragment was masked by the antiferromagnetic interaction between the Cu(2+) centers through the chloride bridge. The magnetic properties agree well with those expected for two [323 Cu(2+)] and a [Fe(CN)](3+) unit with spin-orbit coupling effect of the low-spin iron(III) ions for 2 and for two [323 Cu(2+)] and a [Cr(CN)](3+) unit for 3. In aqueous solution, trinuclear [(323)(2)Cu(2)M(CN)(6)](+) and dinuclear [(323)CuM(CN)(6)](-) species were observed.     

Kinetics studies of aqueous phase reactions of Cl atoms and Cl2(-) radicals with organic sulfur compounds of atmospheric interest

A laser flash photolysis-long path UV-visible absorption technique has been employed to investigate the kinetics of aqueous phase reactions of chlorine atoms (Cl) and dichloride radicals (Cl2(-)) with four organic sulfur compounds of atmospheric interest, dimethyl sulfoxide (DMSO; CH3S(O)CH3), dimethyl sulfone (DMSO2; CH3(O)S(O)CH3), methanesulfinate (MSI; CH3S(O)O-), and methanesulfonate (MS; CH3(O)S(O)O-). Measured rate coefficients at T = 295 +/- 1 K (in units of M(-1) s(-1)) are as follows: Cl + DMSO, (6.3 +/- 0.6) x 10(9); Cl2(-) + DMSO, (1.6 +/- 0.8) x 10(7); Cl + DMSO2, (8.2 +/- 1.6) x 10(5); Cl2(-) + DMSO2, (8.2 +/- 5.5) x 10(3); Cl2(-) + MSI, (8.0 +/- 1.0) x 10(8); Cl + MS, (4.9 +/- 0.6) x 10(5); Cl2(-) + MS, (3.9 +/- 0.7) x 10(3). Reported uncertainties are estimates of accuracy at the 95% confidence level and the rate coefficients for MSI and MS reactions with Cl2(-) are corrected to the zero ionic strength limit. The absorption spectrum of the DMSO-Cl adduct is reported; peak absorbance is observed at 390 nm and the peak extinction coefficient is found to be 5760 M(-1) cm(-1) with a 2sigma uncertainty of +/-30%. Some implications of the new kinetics results for understanding the atmospheric sulfur cycle are discussed.     

Activation volume measurement for C[bond]H activation. Evidence for associative benzene substitution at a platinum(II) center

The reaction of the platinum(II) methyl cation [(N-N)Pt(CH(3))(solv)](+) (N-N = ArN[double bond]C(Me)C(Me)[double bond]NAr, Ar = 2,6-(CH(3))(2)C(6)H(3), solv = H(2)O (1a) or TFE = CF(3)CH(2)OH (1b)) with benzene in TFE/H(2)O solutions cleanly affords the platinum(II) phenyl cation [(N-N)Pt(C(6)H(5))(solv)](+) (2). High-pressure kinetic studies were performed to resolve the mechanism for the entrance of benzene into the coordination sphere. The pressure dependence of the overall second-order rate constant for the reaction resulted in Delta V(++) = -(14.3 +/- 0.6) cm(3) mol(-1). Since the overall second order rate constant k = K(eq)k(2), Delta V(++) = Delta V degrees (K(eq)) + Delta V(++)(k(2)). The thermodynamic parameters for the equilibrium constant between 1a and 1b, K(eq) = [1b][H(2)O]/[1a][TFE] = 8.4 x 10(-4) at 25 degrees C, were found to be Delta H degrees = 13.6 +/- 0.5 kJ mol(-1), Delta S degrees = -10.4 +/- 1.4 J K(-1) mol(-1), and Delta V degrees = -4.8 +/- 0.7 cm(3) mol(-1). Thus DeltaV(++)(k(2)) for the activation of benzene by the TFE solvento complex equals -9.5 +/- 1.3 cm(3) mol(-1). This significantly negative activation volume, along with the negative activation entropy for the coordination of benzene, clearly supports the operation of an associative mechanism.     

Composition and thermochemistry of silver bromide vapor

The mole fractions of AgBr and Ag3Br3 in the saturated vapor at 840 K have been evaluated from the vapor mass spectrum, by comparison with the corresponding spectrum of AgCl vapor, where the monomer/trimer ratio is known accurately from vapor molecular weight measurements. Combination of these results with new measurements of the vapor pressure of molten AgBr by the torsion-effusion method in the range 805-936 K yielded the third law enthalpies of vaporization and the standard enthalpies of formation DeltafH degrees 298(AgBr, g) = 27.8 +/- 0.3 kcal mol(-1) and DeltafH degrees 298(Ag3Br3, g) = -19.0 +/- 1 kcal mol(-1). The dissociation energy, D degrees 0(AgBr), is found to be 66.4 +/- 0.3 kcal mol(-1), or 2.88 +/- 0.01 eV, some 3.5-5 kcal mol(-1) lower than previous literature values. Approximate thermochemical stabilities of the dimer species Ag2Cl2 and Ag2Br2 have also been evaluated.     

Structure and bonding in coinage metal halide clusters M(n)X(n), M = Cu, Ag, Au; X = Br, I; n = 1-6

Ab initio calculations in the framework of density functional theory (DFT) were performed to study the lowest-energy isomers of noble metal halide clusters M(n)Br(n) and M(n)I(n), for M = Cu, Ag, or Au and n = 1-6. For all species, the most stable structures were found to be cyclic arrangements. Calculated bond lengths and infrared frequencies were compared with the available experimental data. The nature of the ionocovalent bonding was characterized. The stability and fragmentation were also investigated. The present work confirms previous observations on the particular stability of the trimer.     

Chalcogenide-halides of niobium (V). 1. Gas-phase structures of NbOBr(3), NbSBr(3), and NbSCl(3). 2. Matrix infrared spectra and vibrational force fields of NbOBr(3), NbSBr(3), NbSCl(3), and NbOCl(3)

The molecular structures of NbOBr(3), NbSCl(3), and NbSBr(3) have been determined by gas-phase electron diffraction (GED) at nozzle-tip temperatures of 250 degrees C, taking into account the possible presence of NbOCl(3) as a contaminant in the NbSCl(3) sample and NbOBr(3) in the NbSBr(3) sample. The experimental data are consistent with trigonal-pyramidal molecules having C(3)(v)() symmetry. Infrared spectra of molecules trapped in argon or nitrogen matrices were recorded and exhibit the characteristic fundamental stretching modes for C(3)(v)() species. Well resolved isotopic fine structure ((35)Cl and (37)Cl) was observed for NbSCl(3), and for NbOCl(3) which occurred as an impurity in the NbSCl(3) spectra. Quantum mechanical calculations of the structures and vibrational frequencies of the four YNbX(3) molecules (Y = O, S; X = Cl, Br) were carried out at several levels of theory, most importantly B3LYP DFT with either the Stuttgart RSC ECP or Hay-Wadt (n + 1) ECP VDZ basis set for Nb and the 6-311G basis set for the nonmetal atoms. Theoretical values for the bond lengths are 0.01-0.04 A longer than the experimental ones of type r(a), in accord with general experience, but the bond angles with theoretical minus experimental differences of only 1.0-1.5 degrees are notably accurate. Symmetrized force fields were also calculated. The experimental bond lengths (r(g)/A) and angles ( 90 degree angle (alpha)()/deg) with estimated 2sigma uncertainties from GED are as follows. NbOBr(3): r(Nb=O) = 1.694(7), r(Nb-Br) = 2.429(2), 90 degree angle (O=Nb-Br) = 107.3(5), 90 degree angle (Br-Nb-Br) = 111.5(5). NbSBr(3): r(Nb=S) = 2.134(10), r(Nb-Br) = 2.408(4), 90 degree angle (S=Nb-Br) = 106.6(7), 90 degree angle (Br-Nb-Br) = 112.2(6). NbSCl(3): r(Nb=S) = 2.120(10),r(Nb-Cl) = 2.271(6), 90 degree angle (S=Nb-Cl) = 107.8(12), 90 degree angle (Cl-Nb-Cl) = 111.1(11).     

Bond orders and atomic properties of the highly deformed halogenated fullerenes C60F18 and C60Cl30 derived from their charge densities

The experimental charge densities of the halogenated C(60) fullerenes C(60)F(18) and C(60)Cl(30) were determined from high-resolution X-ray data sets measured with conventional Mo(Kalpha) radiation at 20 K for C(60)Cl(30) and with synchrotron radiation at 92 K for the fluorine compound. Bond topological and atomic properties were analyzed by using Bader's AIM theory. For the different C--C bonds, which vary in lengths between 1.35 and 1.70 A bond orders n between n=2 and significantly below n=1 were calculated from the bond topological properties at the bond critical points (BCP's). The low bond orders are seen for 5/6 bonds with each contributing carbon carrying a halogen atom. By integration over Bader's zero flux basins in the electron density gradient vector field atomic properties were also obtained. In contrast to free C(60), in which all carbon atoms have a uniform volume of 11 A(3) and zero charge, atomic volumes vary roughly between 5 and 10 A(3) in the halogenated compounds. Almost zero atomic charges are also found in the Cl derivative but a charge separation up to +/-0.8 e exists between C and F in C(60)F(18) due to the higher fluorine electronegativity, which is also seen in the electrostatic potential for which the electronegativity difference between carbon and fluorine, and the addition to one hemisphere of the fullerene cage leads to a strong potential gradient along the C(60)F(18) molecule. From the summation over all atomic volumes it follows that the halogen addition does not only lead to a dramatic distortion of the C(60) cage but also to a significant shrinkage of its volume.     

Raman spectroscopic study of the molecular structure of the uranyl mineral zippeite from Jáchymov (Joachimsthal), Czech Republic

Raman spectra at 298 and 77K and infrared spectra of the uranyl sulfate mineral zippeite from Jáchymov (Joachimsthal), Czech Republic, K(0.6)(H(3)O)0.4[(UO(2))6(SO(4))3(OH)7].8H2O, were studied. Observed bands were tentatively attributed to the (UO(2))2+ and (SO(4))2- stretching and bending vibrations, the OH stretching vibrations of water molecules, hydroxyls and oxonium ions, and H(2)O, oxonium, and delta U-OH bending vibrations. Empirical relations were used for the calculation of U-O bond lengths in uranyl R (A)=f(nu(3) or nu(1)(UO(2))2+). Calculated U-O bond lengths are in agreement with U-O bond lengths from the single crystal structure analysis and those inferred for uranyl anion sheet topology of uranyl pentagonal dipyramidal coordination polyhedra. The number of observed bands supports the conclusion from single crystal structure analysis that at least two symmetrically distinct U6+ (in uranyls) and S6+ (in sulfates), water molecules and hydroxyls may be present in the crystal structure of the zippeite studied. Strong to very weak hydrogen bonds present in the crystal structure of zippeite studied were inferred from the IR spectra.     

The crystal and molecular structure of (2-Hydroxyphenyl) alanine (o-Tyrosine).

The crystal structure of D,L-(2-hydroxyphenyl)-alanine has been determined by X-ray methods using 1971 observed reflections. The crystals are monoclinic, space group P2-1, with four molecules in the unit cell of dimensions a=6.32-5 A; b=26.48-9 A; c=5.36-7 A, and beta=98.1-8 degrees. The structure was solved by direct methods and refined to a conventional R-factor of 0.048; estimated standard deviations in bond lengths not involving hydrogen are 0.002-0.004 A and in angles 0.1-0.2 degrees. Bond lengths and angles are in accordance with those found in tyrosine. Owing to an intra-molecular hydrogen bond between the ammonium group and the ring hydroxyl oxygen atom, however, the conformational angles differ from those found in several other phenylalanine derivatives. There are non-crystallographic centres of symmetry between pairs of enantiomeric molecules.     

Reactivity of titanium dimer and molecular nitrogen in rare gas matrices. Vibrational and electronic spectra and structure of Ti2N2

The reactivity of diatomic titanium with molecular nitrogen has been investigated in rare gas matrices. The formation of Ti2N2 from the condensation of effusive beams of Ti and N2 in neon and argon matrices is observed after sample deposition. Our results also show that the in situ formation results from the spontaneous reaction at 9 K of ground state Ti2 with N2. Several low-lying excited states of Ti2N2 are also observed between 0.78 and 1.1 eV above the ground state, leading to a complex sequence of interacting vibronic transitions, merging into a broad continuum above 1.25 eV. Observations of Ti2(14)N2, Ti2(15)N2 and Ti2(14)N(15)N isotopic data enable the determination of all fundamental vibrations in the ground electronic state. Semi-empirical harmonic potential calculations lead to estimates of 3.22 N cm(-1) for the Ti-N bond force constant and 90 +/- 5 degrees for the bond angles. Comparisons with TiN diatomic data suggest a near square-planar structure with 175 +/- 3 pm TiN bond distance. Quantum chemical calculations at various levels indicate a 1A(g) ground state with a Ti-N distance close to 180 pm and 89 degrees for the NTiN bond angle, and give fundamental frequencies in excellent agreement with the experimentally observed values. Further MRCI calculations on all low-lying states enable an interpretation of the complex electronic spectrum in the NIR region.     

Vapor species over cerium and samarium trichlorides, enthalpies of formation of (LnCl(3))(n) molecules and Cl-(LnCl(3))(n) ions

A Knudsen effusion cell mass spectrometric technique was used to study vapor species over CeCl(3) and SmCl(3). Monomer, dimer, and trimer (Sm(3)Cl(9)) molecules, and LnCl(4-), Ln(2)Cl(7-), Ln(3)Cl(10-) (Ln = Ce, Sm) negative ions, were observed in saturated vapor in the temperature range 958-1227 K. Partial vapor pressures of neutral constituents were determined and the enthalpies of sublimation (Delta(s)H, 298 K, kJ.mol(-1)) to monomers and associated molecules obtained: 328 +/- 6 (CeCl(3)), 306 +/- 6 (SmCl(3)), 453 +/- 16 (Ce(2)Cl(6)), 408 +/- 12 (Sm(2)Cl(6)), and 468 +/- 40 (Sm(3)Cl(9)). Equilibrium constants for various chemical reactions were measured and the enthalpies of reactions obtained using the second and third laws of thermodynamics. The enthalpies of formation (Delta(f)H, 298 K, kJ.mol(-1)) of molecules and ions have been calculated as follows: -730 +/- 6 (CeCl(3)), -722 +/- 6 (SmCl(3)), -1663 +/- 16 (Ce(2)Cl(6)), -1649 +/- 13 (Sm(2)Cl(6)), -2617 +/- 40 (Sm(3)Cl(9)), -1250 +/- 15 (CeCl(4)(-)), -1252 +/- 15 (SmCl(4-)), -2184 +/- 35(Ce(2)Cl(7-)), -2172 +/- 26 (Sm(2)Cl(7-)), -3183 +/- 43 (Ce(3)Cl(10-)), and -3147 +/- 43 (Sm(3)Cl(10-)).     

Modeling anhydrous and aqua copper(II) amino acid complexes: a new molecular mechanics force field parametrization based on quantum chemical studies and experimental crystal data

This paper presents the vacuum structures of aquacopper(II) bis(amino acid) complexes with glycine, sarcosine, N,N-dimethylglycine, and N-tert-butyl-N-methylglycine estimated using the B3LYP method. The differences between the B3LYP vacuum structures and experimental crystal structures suggested considerable influence of crystal lattice packing effects on the changes in the complexes' geometries. A previously developed molecular mechanics force field for modeling anhydrous copper(II) amino acidates was reoptimized to simulate these changes and predict the properties of both trans and cis anhydrous and aqua copper(II) amino acid complexes. The modeling included experimental molecular and crystal structures of 13 anhydrous and 10 aqua copper(II) amino acidates with the same atom types (Cu(II), C, H, N, and O) but various copper(II) coordination polyhedron geometries, crystal symmetries, and intermolecular interactions. The empirical parameters of the selected potential energy functions were optimized on the B3LYP vacuum copper(II) coordination geometries of three anhydrous copper(II) amino acidates and on experimental crystalline internal coordinates and unit cell dimensions of six anhydrous and six aqua copper(II) amino acid complexes. The respective equilibrium structures were calculated in vacuo and in simulated crystalline environment. The efficacy of the final force field, FFW, was examined. The total root-mean-square deviations between the experimental and theoretical crystal values were 0.018 A in the bond lengths, 2.2 degrees in the valence angles, 5.5 degrees in the torsion angles, and 0.395 A in the unit cell lengths. FFW reproduced the unit cell volumes in the range from -8.1 to 9.6%. The means of Cu to axial water oxygen distances were 2.4 +/- 0.1 A (experiment) and 2.6 +/- 0.1 A (FFW). This paper describes the ability of the molecular mechanics model and FFW force field to simulate the flexibility of the metal coordination polyhedron. The new force field proved effective in predicting the most stable molecular conformation of copper(II) amino acidato systems in vacuo.     

Rates and mechanisms for the reactions of chlorine atoms with iodoethane and 2-iodopropane

The reaction of Cl atoms with iodoethane has been studied via a combination of laser flash photolysis/resonance fluorescence (LFP-RF), environmental chamber/Fourier transform (FT)IR, and quantum chemical techniques. Above 330 K, the flash photolysis data indicate that the reaction proceeds predominantly via hydrogen abstraction. The following Arrhenius expressions (in units of cm3 molecule(-1) s(-1)) apply over the temperature range 334-434 K for reaction of Cl with CH3CH2I (k4(H)) and CD3CD2I (k4(D)): k4(H) = (6.53 +/- 3.40) x 10(-11) exp[-(428 +/- 206)/T] and k4(D) = (2.21 +/- 0.44) x 10(-11) exp[-(317 +/- 76)/T]. At room temperature and below, the reaction proceeds both via hydrogen abstraction and via reversible formation of an iodoethane/Cl adduct. Analysis of the LFP-RF data yields a binding enthalpy (0 K) for CD3CD2I x Cl of 57 +/- 10 kJ mol(-1). Calculations using density functional theory show that the adduct is characterized by a C-I-Cl bond angle of 84.5 degrees; theoretical binding enthalpies of 38.2 kJ/mol, G2'[ECP(S)], and 59.0 kJ mol(-1), B3LYP/ECP, are reasonably consistent with the experimentally derived result. Product studies conducted in the environmental chamber show that hydrogen abstraction from both the -CH2I and -CH3 groups occur to a significant extent and also provide evidence for a reaction of the CH3CH2I x Cl adduct with CH3CH2I, leading to CH3CH2Cl formation. Complementary environmental chamber studies of the reaction of Cl atoms with 2-iodopropane, CH3CHICH3, are also presented. As determined by relative rate methods, the reaction proceeds with an effective rate coefficient, k6, of (5.0 +/- 0.6) x 10(-11) cm3 molecule(-1) s(-1) at 298 K. Product studies indicate that this reaction also occurs via two abstraction channels (from the CH3 groups and from the -CHI- group) and via reversible adduct formation.     

Antiferromagnetic three-dimensional order induced by carboxylate bridges in a two-dimensional network of [Cu3(dcp)2(H2O)4] trimers

A new Cu(II) complex, [Cu(3)(dcp)(2)(H(2)O)(4)](n), with the ligand 3,5-pyrazoledicarboxylic acid monohydrate (H(3)dcp) has been prepared by hydrothermal synthesis, and it crystallizes in the monoclinic space group P2(1)/c with a = 11.633(2) A, b = 9.6005(14) A, c = 6.9230(17) A, beta = 106.01(2) degrees, and Z = 2. In the solid state structure of [Cu(3)(dcp)(2)(H(2)O)(4)](n), trinuclear [Cu(3)(dcp)(2)(H(2)O)(4)] repeating units in which two dcp(3-) ligands chelate the three Cu(II) ions with the central Cu(II) ion, Cu(1) (on an inversion center), link to form infinite 2D sheets via syn-anti equatorial-equatorial carboxylate bridges between Cu(2) atoms in adjacent trimers. These layers are further linked by syn-anti axial-equatorial carboxylate bridging between Cu(1) atoms in adjacent sheets resulting in the formation of a crystallographic 3D network. A detailed analysis of the magnetic properties of [Cu(3)(dcp)(2)(H(2)O)(4)](n) reveals that the dcp(3-) ligand acts to link Cu(II) centers in three different ways with coupling constants orders of magnitude apart in value. In the high temperature region above 50 K, the dominant interaction is strongly antiferromagnetic (J/k(B) = -32 K) within the trimer units mediated by the pyrazolate bridges. Below 20 K, the trimer motif can be modeled as an S = 1/2 unit. These units are coupled to their neighbors by a ferromagnetic interaction mediated by the syn-anti equatorial-equatorial carboxylate bridge. This interaction has been estimated at J(2D)/k(B) = +2.8 K on the basis of a 2D square lattice Heisenberg model. Finally, below 3.2 K a weak antiferromagnetic coupling (J(3D)/k(B) = -0.1 K) which is mediated by the syn-anti axial-equatorial carboxylate bridges between the 2D layers becomes relevant to describe the magnetic (T, H) phase diagram of this material.     

Gas phase hydration of organic ions

In this work, we study the hydration phenomenon on a molecular level in the gas phase where a selected number of water molecules can interact with the organic ion of interest. The stepwise binding energies (DeltaH degrees (n-1,n)) of 1-7 water molecules to the phenyl acetylene cation are determined by equilibrium measurements using an ion mobility drift cell. The stepwise hydration energies DeltaH degrees (n-1,n) are nearly constant at 39.7 +/- 6.3 kJ mol(-1) from n = 1 to 7. The entropy change is larger in the n = 7 step, suggesting cyclic or cage-like water structures. No water addition is observed on the ionized phenyl acetylene trimer consistent with cyclization of the trimer ion to form triphenyl benzene cations C(24)H(18) (+) which are expected to interact weakly with the water molecules due to steric interactions and the delocalization of the charge on the large organic ion. The work demonstrates that hydration studies of organic ions can provide structural information on the organic ions.