Adsorption Isotherms of Cetylpyridinium Chloride with Iron III Salts at Air/Water and Silica/Water Interfaces

The interaction of iron III salts and cetylpyridinium chloride (CPC) has been studied at the air/water and silica/water interfaces. The surface tension of cetylpyridinium chloride has been determined in aqueous solutions in the presence of iron III chloride and iron III nitrate at two constant pH values, namely, 3.5 and 1.2. It is shown that the surface tension of the cationic surfactant depends upon the ionic strength of the solution through the pH adjustment in the presence of the former salt but not in the presence of the latter. The effect of iron III nitrate on the surface tension of CPC is similar to that of potassium nitrate, indicating that the iron III various-hydrolyzed species do not interfere with the composition of the air/water interface. The competitive adsorption of iron III nitrate salt and the cationic surfactant at a silica/water interface was next investigated. The adsorption isotherms were determined at pH 3.5. It is shown that although the iron III ions, which were added to the silica dispersion in the presence of the cetylpyridinium ions, were strongly bound to the anionic surface sites, the surfactant ions are not salted out in the solution but remain in close vicinity of the silica surface. Conversely as the cationic surfactant is added first to the silica dispersion in the presence of the adsorbed iron III ions, the metal ions and the surfactant ions are both coadsorbed onto the silica surface. It is suggested that iron III hydrolyzed or free cations and the cationic surfactant molecules may not compete for the same adsorption sites onto the silica surface.     

Adsorption and direct probing of fibrinogen and sodium myristate at the air/water interface

Fibrinogen (FB), a serum protein, is considered a major inhibitor of lung surfactant function at the lining layer of the alveoli. In this study, the adsorption of aqueous bovine FB at the air/water interface was investigated with tensiometry and directly probed for the first time with ellipsometry and infrared reflection adsorption spectroscopy (IRRAS). The tension results show that FB has moderate surface activity. The surface densities of FB were calculated by using two different ellipsometry models to range from 3±0.2 to 17±2 mg/m², for 7.5 to 750 ppm of FB in water at 25°C. Although FB at concentrations from 75 to 750 ppm reached about the same steady surface tension value, the surface densities at 750 ppm FB were substantially larger. The same techniques were used for studying aqueous mixtures of 7.5 to 750 ppm FB with 2 mM of sodium myristate (SM) to investigate a possible interaction of the SM with the protein. The behavior of the FB/SM mixtures was found to be close to that of SM alone. The surface tension of the FB/SM mixtures reached values less than 10 mN/m under surface area oscillation at 20 or 80 rpm. These results and the ellipsometry and the IRRAS results indicate that at a concentration of 2 mM SM, FB, up to 750 ppm, does not inhibit the surfactant surface-tension-lowering function. In certain cases the results demonstrate that FB and SM may act cooperatively in lowering the surface tension.     

Influence of Surface Hydrophobic Groups on the Adsorption of Proteins onto Nonporous Polymeric Particles with Immobilized Metal Ions

Iminodiacetic acid (IDA) and octyl moieties were covalently bound on nonporous particles, which were prepared from dispersion polymerization of methyl methacrylate and glycidyl methacrylate. After being charged with copper ions, the IDA-bound particles could specifically adsorb deoxyribonuclease I (DNase I) through the affinity interaction between protein and immobilized metal ion. A mixed-ligand (metal–chelate and octyl–bound) support was obtained after hydrophobic (octyl) groups were also introduced to the particle surface. The affinity adsorption of DNase I on the copper–IDA chelate was influenced by interaction between the protein and the bound octyl group. Both the affinity and the hydrophobic interactions could be well described by the Langmuir isotherms. The equilibrium adsorption constants were estimated separately to be 0.96 and 0.50 liter g⁻¹ for affinity and hydrophobic bindings, respectively. For binding on mixed-ligand support, the adsorption constant was 0.45 liter g⁻¹. It was evident that both affinity and hydrophobic interactions are involved in the adsorption of proteins onto mixed-ligand particles. Desorption of the inactive proteins from the support was possible by increasing the hydrophobicity of the solution.     

Effect of pore structure on surface characteristics of zirconium phosphate-modified silica

Three samples of silica of different pore structure-predominantly microporous, S1; mesoporous, S2; and nonporous, S3-were modified with zirconium phosphate and examined. Pore structure analysis showed that modification had taken place in wider pores of S1 leaving a totally microporous sample, and in large pores of S2 giving a mesoporous sample of narrower pore size distribution. The modification of the nonporous sample decreased the surface area and pore volume to a lower extent than in the other two samples, but resulted in a surface of lower energy toward N2. The different distribution of surface silanol groups on the surfaces of different porosity may result in variable pictures on the modified surfaces as reflected in the differences observed in Br?nsted acidity of modified surfaces. The use of these modified silica samples for amino acid adsorption (L-glutamic acid and L-alanine) indicated that both the isoelectric point of the amino acid and the distribution of surface groups on modified solids are controlling the adsorption process.     

Wetting Study of Hydrophobic Membranes via Liquid Entry Pressure Measurements with Aqueous Alcohol Solutions

A new concept of liquid entry pressure measurements is applied to study the hydrophobicity of microporous membranes for aqueous alcohol solutions. The effects of alcohol concentration, type of alcohol, and temperature on liquid entry pressure of the membrane have been studied. Two theoretical equations for the determination of membrane pore size have been proposed. The former equation was developed taking into account the deviation from the Laplace–Young equation due to the membrane structure by means of the structure angle. The latter equation was established considering only the range of alcohol concentration in which the dispersion component of liquid surface tension remains practically constant. Hydrophobicity has been expressed in terms of wetting surface tension, γ_L^w. Based on these measurements, the maximum concentration before the spontaneous wetting occurs would be predicted.     

Thermodynamics of micellization of alkyldimethylbenzylammonium chlorides in aqueous solutions

Specific conductivities of alkyldimethylbenzylammonium chlorides (alkyl=decyl-, dodecyl-, tetradecyl-, and hexadecyl-) in aqueous solutions were measured as a function of molality and temperature. Critical micelle molalities (cmc) and degrees of ionization of the micelles, beta, were estimated from the dependence of the specific conductivity on molality. It was found that temperature dependence of cmc is U-shaped with a minimum shifting toward higher temperatures with a decrease in the chain length of the alkyl group. The temperature dependence of ln xcmc (where xcmc is the cmc in mole fraction units) was fitted to the equation of Muller, which we modified by taking into account the temperature dependencies both of beta and of change in heat capacity upon micellization. From the fitting parameters, Gibbs free energies, enthalpies, and entropies of micellization as a function of temperature were estimated.     

Analysis of the Silica Surface Free Energy by the Imbibition Technique

The surface free energy of silica and its components have been evaluated from imbibition experiments performed with liquids of differing surface properties by the distance–time method. Data were analyzed by a parabolic fit to Washburn's equation, because of the uncertainty in the exact position and time at which penetration begins in these kinds of experiments. In addition to the mathematical treatment of the experimental results, the influence of the components and parameters of the surface tension of the liquids used on the values of the solid surface free-energy components has been analyzed.     

Synthesis and Surface Properties of N-Alkyl-N-methylgluconamides and N-Alkyl-N-methyllactobionamides

Three series of nonionic N-alkylaldonamides, N-alkyl-N-methylgluconamides (Cn-MGA, Cn: n-C(10)H(21), n-C(12)H(25), n-C(14)H(29), n-C(16)H(33), and n-C(18)H(37)), N-alkyl-N-methyllactobionamides (Cn-MLA, alkyl as above-mentioned), and N-oleyl-N-methylglucon/lactobionamide, were synthesized in the reaction of an appropriate N-alkyl-N-methylamine with delta-D-glucolactone and lactobionic acid, respectively. Krafft temperatures of aqueous solutions and surface properties of these surfactants at 20 degrees C, i.e., surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), effectiveness in surface tension reduction, Pi(cmc), critical micelle concentration, CMC, and CMC/C(20) parameter as well as standard free energies of adsorption, DeltaG degrees (ads), and of micellization, DeltaG degrees (mic), were determined. It was shown that introduction of the methyl group to the amide nitrogen increased the solubility of the surfactants, which was confirmed by their Krafft temperatures. Lactobionamides are more water soluble than gluconamides. On the other hand, the Cn-MGA surfactants are more surface active than the respective Cn-MLA ones. This observation is based on the determined adsorption and micellization parameters. The presence of one double bond in a hydrocarbon chain as in oleyl-amides increases their hydrophilic character compared with that of saturated C18 derivatives. No distinct differences were observed between the A(min) values obtained for both series studied, although they differ markedly in the size of the hydrophilic groups. Copyright 2001 Academic Press.     

Dynamic surface tension behavior of aqueous solutions ofN-dodecyl-N,N dimethyl aminobetaine chlorohydrate

The adsorption behavior ofN-dodecyl-N,N dimethyl aminobetaine chlorohydrate (DDAB·HCl) at the air/aqueous interface was studied for solutions in pure water and phosphate buffer (pH=7.4). The equilibrium surface tension versus concentration curves were used to estimate the equilibrium adsorption parameters and CMCs. The buffer solution has a lower CMC and shows higher surface activity below the CMC than the pure water solution. Data and calculations of the dynamic tension behavior at constant-area conditions showed that the adsorption processes of DDAB·HCl solutions are about 10 to 300 times slower than those predicted by a diffusion-controlled model. A mixed kinetics adsorption model with a modified Langmuir-Hinshelwood kinetic equation, which considers an activation energy barrier for adsorption, was applied to find the kinetic adsorption parameters. The dynamic tension behavior at pulsating-area conditions with large amplitude was also examined for frequencies up to 90 cycles/min. The tension amplitude responses depended strongly on the concentration and frequency. Comparisons of diffusion-controlled model predictions and pulsating area tension data confirmed the need to use a mixed kinetics model. The latter model can improve the fit over the diffusion-controlled model, but it does not quantitatively match the observed tensions.     

Use of the Gaussian Distribution Function as a Tool to Estimate Continuous Heterogeneity in Adsorbing Systems

In environmental engineering, adsorption and desorption are phenomena commonly referred to as responsible for pollution dispersion, retention, or retardation in soils, aquifers, and hydrologic systems. They are also used to remove organic pollutants from water or odorous compounds in gas deodorization. Most often, the characterization of the aqueous adsorption systems that are of engineering interest involves a narrow adsorbate concentration range and low values of the adsorbate concentration. The practice is to use the Freundlich equation that best fits most data and is considered sufficient to design adsorption contactors. However, no physical or chemical meaning can be associated with the values taken by the parameters. The present paper gives a new way of analyzing adsorption data, using an extension of the Freundlich equation and the Gaussian distribution function that makes it possible to associate parameter values of this extension with the adsorbate–adsorbent normal interaction energy, its heterogeneity, and to some extent the adsorbate–adsorbate lateral interaction energy.     

Removal of proteinaceous soils using hydroxyl radicals generated by the electrolysis of hydrogen peroxide

We have developed here for the first time a novel method to generate hydroxyl radicals, *OH, by applying slightly negative electric potentials (-0.2--0.8 V vs Ag/AgCl) to the surface of a metal (or metal oxide) that is in contact with hydrogen peroxide solution containing a supporting electrolyte. Namely, *OH radicals were generated at the surface by the electrolysis of hydrogen peroxide according to the equation, H2O2+e- --> *OH+OH-. This method was used to clean a stainless steel fouled with a model protein, beta-lactoglobulin. The *OHs generated at the surface were effective in removing beta-lactoglobulin that had been irreversibly adsorbed, by several minutes of treatment at room temperature (22+/-2 degrees C). The removal rates measured for various concentrations of H2O2 and supporting electrolyte and different potentials were determined exclusively by the electric current.     

Thermodynamic quantities of surface formation of aqueous electrolyte solutions. V. Aqueous solutions of aliphatic amino acids

The surface tension of aqueous solutions of glycine, L-alanine, L-valine, and L-leucine has been observed using the drop volume method as a function of temperature and concentration. The L-leucine molecules form an adsorbed film, while glycine affects the water surface in accordance with simple salts which dissociate into cations and anions completely. The surface tension data have been analyzed in view of K. Motomura's thermodynamic treatment (J. Colloid Interface Sci.64, 348 (1978)), and the thermodynamic quantities relevant to the surface have been shown systematically.     

Adsorption of 1,4-Benzenedithiol on Gold and Silver Surfaces: Surface-Enhanced Raman Scattering Study

The adsorption behavior of 1,4-benzenedithiol (1,4-BDT) on colloidal gold and silver surfaces has been investigated by means of surface-enhanced Raman scattering (SERS). 1,4-BDT chemisorbed dissociatively on both gold and silver surfaces but as mono- and dithiolate, respectively. Regardless of the bulk concentration of 1,4-BDT, only a monolayer was assembled on the silver surface with a flat orientation by forming two Ag–S bonds. On the gold surface, the monothiolate species,1,4-BDT⁻¹, appeared to assume a rather flat orientation at a very low surface coverage, but as the surface coverage was increased, the adsorbate took a perpendicular orientation. Furthermore, when the bulk concentration of 1,4-BDT was close to that required for a full-monolayer coverage limit, a band assignable to the S–S stretching vibration appeared at 536 cm⁻¹ in the gold sol SERS spectra. A separate ellipsometry measurement performed with vacuum-evaporated gold substrates revealed that up to tetralayers could be assembled on gold in 1 mM n-hexane solution of 1,4-BDT while at best a bilayer formed in either methanol or ethanol solution. The different adsorbate structure of 1,4-BDT on gold and silver was overall quite comparable to that of p-xylene-α,α′-dithiol.     

H(2)O Outgassing Properties of Fumed and Precipitated Silica Particles by Temperature-Programmed Desorption

Temperature-programmed desorption was performed at temperatures up to 850 K on as-received fumed and precipitated silica particles. Physisorbed water molecules on both types of silica had activation energies in the range of 38–61 kJ/mol. However, the activation energies of desorption for chemisorbed water varied from 80 to >247 kJ/mol for fumed silica, Cab-O-Sil-M-7D, and 96 to 155 kJ/mol for precipitated silica, Hi-Sil-233. Our results suggest that physisorbed water can be effectively pumped away at room temperature (or preferably at 320 K) in a matter of hours. Chemisorbed water with high activation energies of desorption (>126 kJ/mol) will not escape silica surfaces in 100 years even at 320 K, while a significant amount of the chemisorbed water with medium activation energies (80–109 kJ/mol) will leave the silica surfaces in that time span. Most of the chemisorbed water with activation energies <126 kJ/mol can be pumped away in a matter of days in a good vacuum environment at 500 K. We had previously measured about 0.1–0.4 wt% of water in silica-reinforced polysiloxane formulations containing 21% Cab-O-Sil-M-7D and 4% Hi-Sil-233. Comparing present results with these formulations, we conclude that the adsorbed H₂O and the Si–OH bonds on the silica surfaces are the major contributors to water outgassing from these types of silica-filled polymers.     

Dynamic electrophoretic mobility of a concentrated dispersion of particles with a charge-regulated surface at arbitrary potential

The dynamic electrophoretic mobility of a concentrated dispersion of biocolloids such as cells and microorganisms is modeled theoretically. Here, a biological particle is simulated by a particle, the surface of which contains dissociable functional groups. The results derived provide basic theory for the quantification of the surface properties of a biocolloid through an electroacoustic device, which has the merit of making direct measurement on a concentrated dispersion without dilution. Two key parameters are defined to characterize the phenomenon under consideration: the first, A, is associated with the pH of the dispersion, and the second, B, is associated with the equilibrium constant of the dissociation reaction of the functional group. We show that if A is large and/or B is small, the surface potential is high, and the effect of double-layer polarization becomes significant. In this case the dynamic electrophoretic mobility may have a local maximum and a phase lead as the frequency of the applied electric field varies. Due to the hydrodynamic interaction between neighboring particles, the dynamic electrophoretic mobility decreases with the concentration of dispersion.     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

Nitrogen Adsorption Studies of PAN-Based Activated Carbon Fibers Prepared by Different Activation Methods

Polyacrylonitrile (PAN)-based activated carbon fibers (ACFs) prepared by various activation methods were characterized using low-temperature nitrogen adsorption over a wide relative pressure from 10⁻⁶ to 1. Nitrogen adsorption is a standard tool for determination of porous structure parameters. In the present work, we carried out extensive adsorption studies of a series of PAN-ACFs activated by different methods. It was shown that the high-resolution α_S plot provided valuable information about structural properties of samples under study. The pore size distributions of samples under study were calculated by employing the regularization method according to density functional theory. By these analyses, the pore development and the dominant pores of samples prepared by different methods can be clearly observed. Moreover, the adsorption measurement could provide profound insight into the structural heterogeneity of the ACFs.     

A Novel Method for Surface Free-Energy Determination of Powdered Solids

Interfacial solid/liquid interactions play a crucial role in wetting, spreading, and adhesion processes. In the case of a flat solid surface, contact angle measurements are commonly utilized for the determination of the solid surface free energy and its components. However, if such a surface cannot be obtained, then the contact angle can not be measured directly. Usually methods based on imbibition of probe liquids into a thin porous layer or column are applied. In this paper a novel method, also based on the capillary rise, is proposed for the solid surface free-energy components determination. Actually, it is a modification of the thin column wicking method; similar theoretical background can be applied together with that appropriate for the capillary rise method of liquid surface tension determination. The proposed theoretical approach and procedure are verified by using single glass capillaries, and then alumina and ground glass powders were used for the method testing. Thus obtained surface free-energy components for these solids, for both glass and alumina, agree well with the literature values.     

Low temperature synthesis and characterization of porous anatase TiO2 nanoparticles

An ethanol solution of Ti-peroxy compounds was prepared from the ethanol solution of titanium isopropoxide (Ti(O-iPr)4) and H2O2. Heating of the ethanol solution of the Ti-peroxy compounds at 348 K formed a Ti-peroxy gel, and heat treatment of the gel at 348 K for more than 6 h formed gels that consisted of anatase nanoparticles. The diameter of the anatase nanoparticles increased from 9 to 15 nm as the heating time increased from 6 to 48 h. According to the results of the N2 adsorption measurement, the anatase nanoparticles had micropores, and the specific surface area (SBET) was in the range of 254 to 438 m2/g. The particle size, lattice strain, specific surface area, and photocatalytic activity of the anatase nanoparticles can be regulated by the heating time of the Ti-peroxy gel at 348 K.