Towards Stereoselective Synthesis of the C(31)–C(39) and C(20)–C(27) Fragments of Phorboxazole A

The stereoselective synthesis of the C(31)–C(39) and C(20)–C(27) fragments of phorboxazole A ( 1 ) was achieved from commercially available and inexpensive D ‐mannitol. Crimmins aldol reaction and a decarboxylative Claisen‐type reaction are the key steps for the C(31)–C(39) fragment, and L ‐proline‐catalyzed aldol reaction, Sharpless asymmetric epoxidation, and epoxide ring opening reaction with Gilman's reagent are the key steps for the C(20)–C(27) fragment of phorboxazole.     

A crossed molecular beam study on the formation of hexenediynyl radicals (H(2)CCCCCCH; C(6)H(3) (X(2)A')) via reactions of tricarbon molecules, C(3)(X(1)Sigma(g)(+)), with allene (H(2)CCCH(2); X(1)A(1)) and methylacetylene (CH(3)CCH; X(1)A(1))

Crossed molecular beams experiments have been utilized to investigate the reaction dynamics between two closed shell species, i.e. the reactions of tricarbon molecules, C(3)(X(1)Sigma(g)(+)), with allene (H(2)CCCH(2); X(1)A(1)), and with methylacetylene (CH(3)CCH; X(1)A(1)). Our investigations indicated that both these reactions featured characteristic threshold energies of 40-50 kJ mol(-1). The reaction dynamics are indirect and suggested the reactions proceeded via an initial addition of the tricarbon molecule to the unsaturated hydrocarbon molecules forming initially cyclic reaction intermediates of the generic formula C(6)H(4). The cyclic intermediates isomerize to yield eventually the acyclic isomers CH(3)CCCCCH (methylacetylene reaction) and H(2)CCCCCCH(2) (allene reaction). Both structures decompose via atomic hydrogen elimination to form the 1-hexene-3,4-diynyl-2 radical (C(6)H(3); H(2)CCCCCCH). Future flame studies utilizing the Advanced Light Source should therefore investigate the existence of 1-hexene-3,4-diynyl-2 radicals in high temperature methylacetylene and allene flames. Since the corresponding C(3)H(3), C(4)H(3), and C(5)H(3) radicals have been identified via their ionization potentials in combustion flames, the existence of the C(6)H(3) isomer 1-hexene-3,4-diynyl-2 can be predicted as well.     

Investigation of the radical product channel of the CH(3)C(O)CH(2)O(2) + HO(2) reaction in the gas phase

The reaction of CH(3)C(O)CH(2)O(2) with HO(2) has been studied at 296 K and 700 Torr using long path FTIR spectroscopy, during photolysis of Cl(2)/acetone/methanol/air mixtures. The branching ratio for the reaction channel forming CH(3)C(O)CH(2)O, OH and O(2) () was investigated in experiments in which OH radicals were scavenged by addition of benzene to the system, with subsequent formation of phenol used as the primary diagnostic for OH radical formation. The observed prompt formation of phenol under conditions when CH(3)C(O)CH(2)O(2) reacts mainly with HO(2) indicates that this reaction proceeds partially by channel , which forms OH both directly and indirectly, by virtue of secondary generation of CH(3)C(O)O(2) (from CH(3)C(O)CH(2)O) and its reaction with HO(2) (). The secondary generation of OH radicals was confirmed by the observed formation of CH(3)C(O)OOH, a well-established product of the CH(3)C(O)O(2) + HO(2) reaction (via channel ). A number of delayed sources of OH also contribute to the observed phenol formation, such that full characterisation of the system required simulations using a detailed chemical mechanism. The dependence of the phenol and CH(3)C(O)OOH yields on the initial peroxy radical precursor reagent concentration ratio, [methanol](0)/[acetone](0), were well described by the mechanism, consistent with a small but significant fraction of the reaction of CH(3)C(O)CH(2)O(2) with HO(2) proceeding via channel . This allowed a branching ratio of k(3b)/k(3) = 0.15 +/- 0.08 to be determined. The results therefore provide strong indirect evidence for the participation of the radical-forming channel of the title reaction.     

C-D(0) (D(0) = pi-donor, F) Cleavage in H(2)C=CH(D(0)) by (Cp(2)ZrHCl)(n): mechanism, agostic fluorines, and a carbene of Zr(IV).

Consistent with the C-O cleavage behavior of vinyl ethers, vinyl fluoride reacts with Cp(2)ZrHCl to give Cp(2)ZrFCl and C(2)H(4) as primary products. DFT (B3PW91) calculations show this reaction to be highly exoenergetic (-55 kcal/mol), and reveal a sigma-bond metathesis mechanism to be unfavorable compared to a Zr-H addition across the C=C bond, with regiochemistry placing F on C(beta) of the resulting fluoroethyl ligand. beta-F elimination (onto Zr) then completes the reaction. There is no eta(2)-olefin intermediate on the reaction path. DFT calculations seeking the energy and structure of the two carbenes Cp(2)ZrHCl[CF(CH(3))] and Cp(2)ZrFCl[CH(CH(3))] are also described.     

Stereoselective synthesis of the C(1)-C(11) fragment of peloruside A

A highly stereoselective synthesis of the C(1)-C(11) fragment 4 of peloruside A has been accomplished via a stereoselective double allylboration and an intramolecular epoxide opening to provide the functionally dense C(3)-C(11) segment 14. A glycolate aldol reaction was then employed to introduce the remaining stereocenters at C(2)-C(3). [reaction: see text]     

A crossed molecular beam study of the O(1D) + C(3)H(8) reaction: multiple reaction pathways.

The O((1)D) + C(3)H(8) reaction has been reinvestigated using the universal crossed molecular beam method. Three reaction channels, CH(3) + C(2)H(4)OH, C(2)H(5) + CH(2)OH, and OH + C(3)H(7), have been observed. All three channels are significant in the title reaction with the C(2)H(5) formation process to be the most important, while the CH(3) formation and the OH formation channels are about equal. Product kinetic energy distributions and angular distributions have been determined for the three reaction channels observed. The oxygen-containing radicals in the CH(3) and C(2)H(5) formation pathways show forward-backward symmetric angular distribution relative to the O atom beam, while the OH product shows a clearly forward angular distribution. These results indicate that the OH formation channel seems to exhibit different dynamics from the CH(3) and C(2)H(5) channels.     

气相反应C_(60)+O_3=C_(6O)(C_(2v))+O_2热力学函数的计算

计算了气相反应C60＋O3＝C6O（C2v）＋O2的热力学函数．得到了该反应Gibbs自由能的具体数值，结果表明在所研究的温度范围内Gibbs自由能为负值，从热力学角度来说，该反应可以自发进行,在计算该气相反应热力学函数的基础上，给出了气相C6O（C2v）的标准热力学函数     

Total synthesis of scytophycin C. 2. Coupling reaction of the C(1)-C(18) segment and the C(19)-C(31) segment, a key macrolactonization, and the crucial terminal amidation reaction

[reaction: see text] Stereoselective syntheses of the C(1)-C(18) segment (segment A) and the C(19)-C(31) segment (segment B) are described in the preceding paper. This paper reports the key coupling reaction of both segments, 22-membered lactonization, and the crucial terminal amidation reaction culminating in the total synthesis of scytophycin C.     

Discovery of C(60)O(3) isomer having C(3)(nu) symmetry

A hitherto undetected type of C(60)O(3) isomer was found in the reaction solution of C(60) with m-chloroperoxybenzoic acid by means of a chromatographic technique using two different columns. Both electronic spectroscopy and atmospheric pressure chemical ionization (APCI) mass-spectroscopy examinations show its C(3)(nu) symmetry, in which three oxygen atoms are added onto one benzenoid ring of C(60).     

On a possible growth mechanism for polycyclic aromatic hydrocarbon di-cations: C(7)H(6)(2+) + C(2)H(2)

The mechanism of the bond-forming reaction between C(7)H(6) (2+) and C(2)H(2) to yield C(9) entities has been investigated by density functional theory calculations with close comparison with experimental data. It is shown that the reaction produces the C(9)H(6) (2+) and C(9)H(7) (2+) di-cations with geometries most probably derived from the indene skeleton. In comparison, the formation of linear structures of di-cations is much more energy-demanding and therefore appears improbable.     

Synthesis of the C(1)-C(12) segment of peloruside A by an alpha-benzyloxymethyl ketone aldol strategy

The C(1)-C(12) segment of 16-membered antitumor macrolide peloruside A has been prepared by a BF(3).OEt(2)-catalyzed Mukaiyama aldol reaction between a glucose-derived C(1)-C(7) aldehyde and a C(8)-C(12) alpha-benzyloxymethyl ketone. Exclusive 2,3-anti and moderate 3,5-anti/syn facial selectivity (3.5:1) was observed in the aldol reaction. The key C(1)-C(7) aldehyde contains the required stereochemistry at carbons two, three, and five, and has been efficiently prepared on multigram scales from commercial triacetyl D-glucal. [reaction: see text]     

Products of the gas-phase reactions of OH radicals with (C2H5O)2P(S)CH3 and (C2H5O)3PS

Products of the gas-phase reactions of OH radicals with O,O-diethyl methylphosphonothioate [(C2H5O)2P(S)CH3, DEMPT] and O,O,O-triethyl phosphorothioate [(C2H5O)3PS, TEPT] have been investigated at room temperature and atmospheric pressure of air using in situ atmospheric pressure ionization mass spectrometry (API-MS) and, for the TEPT reaction, gas chromatography and in situ Fourier transform infrared (FT-IR) spectroscopy. Combined with products quantified previously by gas chromatography, the products observed were: from the DEMPT reaction, (C2H5O)2P(O)CH3 (21+/-4% yield) and C2H5OP(S)(CH3)OH or C2H5OP(O)(CH3)SH (presumed to be C2H5OP(O)(CH3)SH by analogy with the TEPT reaction); and from the TEPT reaction, (C2H5O)3PO (54-62% yield), SO2 (67+/-10% yield), CH3CHO (22-40% yield) and, tentatively, (C2H5O)2P(O)SH. The FT-IR analyses showed that the formation yields of HCHO, CO, CO2, peroxyacetyl nitrate [CH3C(O)OONO2], organic nitrates, and acetates from the TEPT reaction were <5%, 3+/-1%, <7%, <2%, 5+/-3%, and 3+/-2%, respectively. Possible reaction mechanisms are discussed.     

Vibrational and rotational distributions of the CH(A2Delta) product of the C(2)H + O(3P) reaction studied by fourier transform visible (FTVIS) emission spectroscopy

The C(2)H + O((3)P) --> CH(A) + CO reaction is investigated using Fourier transform visible emission spectroscopy. The O((3)P) and C(2)H radicals are produced by simultaneous 193 nm photolysis of SO(2) and C(2)H(2) precursors, respectively. The nascent vibrational and rotational distributions of the CH(A) product are obtained under time-resolved, but quasi-steady-state, conditions facilitated by the short lifetime of the CH(A) emission. The vibrational temperature of the CH(A) product is found to be appreciably hotter (2800 +/- 100 K) than the rotational distributions in the v' = 0 (1400 +/- 100 K) and v' = 1 (1250 +/- 250 K) levels. The results suggest that the reaction may proceed through an electronically excited HCCO() intermediate; moreover, the vibrational excitation compared to rotational excitation is higher than expected based on a statistical distribution of energy and may be the result of geometrical changes in the transition state. The CH(A) emission is also observed in a C(2)H(2)/O/H reaction mixture using a microwave discharge apparatus to form O atoms, with subsequent H atom production. The nascent rotational and vibrational distributions of the CH(A) determined by the microwave discharge apparatus are very similar to the CH(A) distributions obtained in the photodissociation experiment. The results support the idea that the C(2)H + O((3)P) reaction may play a role in low-pressure C(2)H(2)/O/H flames, as previously concluded.     

Synthesis of the C(18)-C(34) fragment of amphidinolide C and the C(18)-C(29) fragment of amphidinolide F

A convergent synthesis of the C(18)-C(34) fragment of amphidinolide C and the C(18)-C(29) fragment of amphidinolide F is reported. The approach involves the synthesis of the common intermediate tetrahydrofuranyl-β-ketophosphonate via cross metathesis, Pd(0)-catalyzed cyclization, and hydroboration-oxidation. The β-ketophosphonate was coupled to three side chain aldehydes using a Horner-Wadsworth-Emmons (HWE) olefination reaction to give dienones, which were reduced with l-selectride to give the fragments of amphidinolide C and F.     

四甲基二硅桥连双(四甲基环戊二烯基)四羰基二铁的反应性

标题化合物1与HgCl~2反应, 除生成希望的产物2外, 还分离到2的歧化产物3和4。1经Na-Hg还原, 生成Fe-Fe键断裂的双铁负离子5, 5分别与多种氯化物反应, 生成在铁原子上引入取代基的衍生物6, 7和8。以元素分析、IR及^1H NMR谱表征了化合物2-4及6-8的分子结构。     

Oxidative Addition of a Mechanically Entrapped C(sp)–C(sp) Bond to a Rhodium(I) Pincer Complex

By use of a macrocyclic phosphinite pincer ligand and bulky substrate substituents, we demonstrate how the mechanical bond can be leveraged to promote the oxidative addition of an interlocked 1,3-diyne to a rhodium(I) center. The resulting rhodium(III) bis(alkynyl) product can be trapped out by reaction with carbon monoxide or intercepted through irreversible reaction with dihydrogen, resulting in selective hydrogenolysis of the C−C σ-bond.     

Synthesis of the C(43)-C(67) fragment of amphidinol 3

[reaction: see text] A synthesis of the C(43)-C(67) fragment of amphidinol 3 (AM3) has been accomplished by a route that features the use of a double allylboration reaction for synthesis of 1,5-diol 4b, which serves as a precursor to dihydropyran 11.     

Sub- and supercritical glycolysis of polyethylene terephthalate (PET) into the monomer bis(2-hydroxyethyl) terephthalate (BHET)

Sub- and supercritical glycolysis of polyethylene terephthalate (PET) with ethylene glycol (EG) to bis(2-hydroxyethyl) terephthalate (BHET) was investigated for the purpose of developing a PET recycling process. Supercritical glycolysis was carried out at 450 °C and 15.3 MPa while subcritical glycolysis was carried out at 350 °C and 2.49 MPa or at 300 °C and 1.1 MPa. High yields (gt; 90%) of the monomer BHET were obtained in both super- and subcritical cases. For the same PET/EG weight ratio of about 0.06, the optimum reaction time was 30 min for supercritical glycolysis and 75 and 120 min for two cases of subcritical glycolysis. GPC, RP-HPLC, ¹H NMR and ¹³C NMR, and DSC were used to characterize the polymer and reaction products. Supercritical glycolysis will be suitable to a process requiring a high throughput due to its short reaction time.     

Curing kinetics of the synthesis of poly(2-hydroxyethyl methacrylate) (PHEMA) with ethylene glycol dimethacrylate (EGDMA) as a crosslinking agent

An experimental study was carried out to investigate the effect of ethylene glycol dimethacrylate (EGDMA, as a crosslinking agent) content on the curing kinetics of the polymerization of 2-hydroxyethyl methacrylate (HEMA), using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). EGDMA may cause a crosslinking-facilitated gel effect which reduces the termination rate of living free radicals and enhances the overall reaction rate, but it may also induce a diffusional resistance for the reactants so that some free monomers are trapped and pendant vinyl groups are prohibited from reaction by the crosslinked structure. At higher content of EGDMA, the later effect becomes predominant, and the reaction rate and the final conversion are limited. The exothermic peak of the curing reaction tends to carry a shoulder and then split into two peaks as the amount of EGDMA is increased, possibly due to a later reaction of the trapped monomers and pendant vinyls. The heat of reaction measured by DSC in the scanning mode is 61.2 kJ/mol CC. The activation energy (E) of the curing reaction ranges from 56.5 to 78.3 kJ/mol CC depending on the EGDMA content and the type of operation. The diffusion-limited reaction rate and the different thermal history experienced in the nonisothermal and isothermal curing can result in variations of the results in the activation energy measurement. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1873–1889, 1997     

Developing Reagents To Orient Fullerene Derivatives. Formation and Structural Characterization of (eta(2)-C(60)O)Ir(CO)Cl(As(C(6)H(5))(3))(2)

In order to obtain crystals of fullerene oxides that are suitable for single-crystal X-ray diffraction, the reactions between C(60)O and Vaska type iridium complexes have been examined. While reaction with Ir(CO)Cl(P(C(6)H(5))(3))(2)(and with triphenylphosphine but not triphenylarsine) results in partial deoxygenation of the fullerene epoxide, reaction with Ir(CO)Cl(As(C(6)H(5))(3))(2)()()produces crystalline (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2).4.82C(6)H(6).0.18CHCl(3). Black triangular prisms of (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2).4.82C(6)H(6).0.18CHCl(3)form in the monoclinic space group P2(1)/n with a = 14.662(2) ?, b = 19.836(2) ?, c = 28.462(5) ?, and beta = 100.318(12) degrees at 123 (2) K with Z = 4. Refinement (on F(2)) of 10 472 reflections and 1095 parameters with 10 restraints yielded wR2 = 0.152 and a conventional R = 0.066 (for 7218 reflections with I > 2.0sigma(I)). The structure shows that the iridium complex is bound to a 6:6 ring junction of the fullerene with four partially occupied sites for the epoxide oxygen atom. Thus, while deoxygenation of the fullerene does not occur upon reaction with Ir(CO)Cl(AsPh(3))(2), there is a greater degree of disorder in (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2)than previously reported for (eta(2)-C(60)O)Ir(CO)Cl(PPh(3))(2).