Surface characterization and catalytic evaluation of manganese nodule leached residue toward oxidation of benzene to phenol

Water washed manganese nodule leached residue (WMNLR) calcined at different temperatures was characterized by XRD, FTIR, TG-DTA, surface area, surface oxygen, and surface acid sites. Surface area, surface oxygen, surface hydroxyl group, and surface acid sites increase up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the calcined samples was tested for single-step oxidation of benzene to phenol using hydrogen peroxide as the oxidant and acetic acid as the solvent at room temperature. The influence of various reaction parameters such as solvent, concentration of solvent, oxidant amount, time, temperature, and catalyst amount was studied to optimize the reaction conditions. WMNLR calcined at 400 degrees C showed the highest catalytic activity towards oxidation of benzene with 12.7% conversion and 98% selectivity.     

Studies on manganese nodule leached residues 2. Adsorption of aqueous phosphate on manganese nodule leached residues

Adsorption of phosphate onto manganese nodule leached residues was investigated as a possible alternative to conventional methods of phosphate removal from industrial effluents. Adsorption behaviors were studied as a function of time, temperature, pH, and concentration level of adsorbate and adsorbent in acetic acid-sodium acetate buffer medium. The adsorption of phosphate follows the Langmuir adsorption isotherms. The magnitude of adsorption of phosphate in manganese nodule leached residues was compared with that in naturally occurring Mn nodule. Manganese nodule leached residues show better affinity toward phosphate adsorption.     

Effect of heat treatment on the physico-chemical properties and catalytic activity of manganese nodules leached residue towards decomposition of hydrogen peroxide

The effect of calcination temperature on the physico-chemical characterization of manganese nodule leached residue (MNLR) and water-washed manganese nodule leached residue (WMNLR) has been investigated on the basis of chemical analysis, XRD, TG-DTA, FTIR, surface hydroxyl groups, surface oxygen, reducing and oxidizing sites, surface area. XRD and IR confirm the presence of amorphous iron oxyhydroxides, delta-MnO2, which are converted to alpha-Fe2O3 and gamma-Mn2O3 phases above 400 degrees C of calcination, respectively. A solid solution of Fe2O3 and Mn2O3 is formed above 700 degrees C. The surface area, surface hydroxyl group, surface oxygen, reducing and oxidizing sites increase with the increase in calcination temperature up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the sample towards H2O2 decomposition shows the similar trend as surface properties. A suitable Mn(3+)Mn4+ couple favours H2O2 decomposition reaction. The activity has been correlated with various physico-chemical properties.     

Adsorption of hexavalent chromium on manganese nodule leached residue obtained from NH3-SO2 leaching

Adsorption of hexavalent chromium onto manganese nodule leached residues was investigated as a possible alternative to the conventional methods of its removal from aqueous synthetic solutions. Adsorption behavior was studied as a function of time, pH, temperature, and concentration of adsorbate and adsorbent in acetic acid-sodium acetate buffer medium. Cr (VI) removal was pH dependent and was found to be of a maximum at pH 3. The applicability of the Langmuir isotherm to the present system was tested. Increased adsorption capacity with increased temperature indicates that the adsorption reaction was endothermic in nature. Based on these studies, thermodynamic parameters such as Gibbs free energy change (DeltaG0), standard enthalpy change (DeltaH0), and standard entropy change (DeltaS0) were calculated.     

Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues

The leached residue, generated after selective extraction of Cu, Ni, and Co in sulfur dioxide-ammonia leaching of manganese nodules, was characterized and batch isothermal adsorption experiments were conducted at ambient temperature to evaluate the effectiveness of the water-washed leached residue for removal of different bivalent metal ions from aqueous synthetic solutions. The effects of pH, initial metal ion concentrations, amount of adsorbent, interfering ions, and heat treatment were also investigated. The uptake of metal ions increased with increasing pH. Under identical conditions the adsorption capacity increased in the order Cd(2+)相似文献   

Studies on selenite adsorption using manganese nodule leached residues

Selenite adsorption on water-washed manganese nodule leached residues (WMNLR) was studied with the aim of detoxifying industrial effluents before their safe disposal into the environment. WMNLR, a solid waste material, was characterized with the help of XRD, FTIR, TG-DTA, pH(pzc), BET surface area, surface oxygen, surface hydroxyl group, and chemical analyses. The adsorption behavior of WMNLR toward selenite was studied as a function of time, pH, temperature, and concentration of adsorbate and adsorbent. Increased adsorption capacity with rise in temperature indicates that the adsorption process was endothermic in nature. Based on the thermodynamic parameters such as the Gibbs free energy change, standard enthalpy change, and standard entropy change, the adsorption process was found to be spontaneous and endothermic in nature. Adsorption followed second-order kinetics. The adsorption capacity of the material was found to be 54.6 mg g(-1) at 60 mg L(-1) of selenite concentration at pH 5 in 3 h contact time.     

Studies on Indian Ocean Manganese Nodules: XI. Physicochemical Characterization and Catalytic Activity of Silver Oxide Mixed Manganese Nodules

The promoting effect of Ag₂O on the physicochemical properties and catalytic activity of manganese nodules has been investigated. The surface area and surface oxygen increased with addition of Ag₂O, reaching a maximum at 1 mol% of Ag, and then decreased with further addition of Ag₂O. The catalytic activity of manganese nodules substantially increased with addition of Ag₂O over a wide range (0.25–25 mol% Ag). Addition of only 0.25 mol% of Ag to the nodule decreased the temperature of complete CO oxidation from 350°C to as low as 100°C. This enhanced activity was explained by the concerted action of Ag and Mn, where CO was preferentially adsorbed on Ag₂O and oxidized. The reduced Ag was then reoxidized rapidly by oxygen transferred from Mn. The promoting effect of Ag₂O on H₂O₂decomposition and ketonization of acetic acid, however, was less pronounced.     

Multi-wall carbon nanotube-supported manganese(III) porphyrin: An efficient and reusable catalyst for the oxidation of alkenes with H2O2 under ultrasonic irradiation

A manganese complex of meso-tetrakis(p-hydroxyphenyl)porphyrin immobilized onto functionalized multi-wall carbon nanotubes has been synthesized and characterized. The catalytic activity of this heterogeneous catalyst was investigated in the oxidation of various olefins with hydrogen peroxide under ultrasonic irradiation. The role of the stoichiometric amounts of acetic anhydride/or acetic acid as an activator that introduces in situ peracetic acid is discussed. This heterogeneous catalyst was highly reusable in the oxidation reactions and reused several times without significant loss of its catalytic activity.     

氧化镁上乙酸乙酯和乙酸丁酯氧化反应（英文）

采用新型无溶剂反应和回流的方法制得锰钾矿型氧化镁(K-OMS-2),同时采用常规方法制得氧化镁,并测试不同催化剂对工业排放气中有机挥发性物质(VOCs)中的模型化合物––乙酸乙酯和乙酸丁酯的催化氧性能.采用N2吸附-脱附、X射线衍射、扫描电镜、程序升温还原和X射线光电子能谱等技术对催化剂进行了表征.所有氧化镁样品均表现出很高的催化乙酸乙酯和乙酸丁酯氧化生成CO2的活性,且制备方法对催化剂性能起着重要作用.新型无溶剂法制得的K-OMS-2纳米棒样品比常规的回流法制得样品表现出更好的催化性能,含锰钾矿型氧化镁的样品比常规方法制得样品表现出更高的活性.性能最好的催化剂也表现出较高的稳定性,在213和202 oC条件下,可分别使90%的乙酸乙酯和乙酸丁酯转化为CO2.催化剂性能的显著差异清楚地表明,对于所选VOCs氧化反应,采用新型无溶剂法制得的K-OMS-2纳米棒样品比常规法制备的氧化镁混合物更好,这可能与样品结构中含有更高的Mn平均氧化态有关.本文表明了催化剂性能与其表面化学性质间存在显著的关联,显示了K-OMS-2内在性质决定了其高的催化性能.     

Activity and selectivity of manganese oxides in alcohols Conversion as influenced by gamma-irradiation

Manganese oxide samples obtained from thermal decomposition of manganese carbonate at 400 and 600 °C were subjected to different doses of g-irradiation within the range 0.2 to 1.6 MGy. The surface and catalytic properties of the above samples were studied using nitrogen adsorption isotherms measured at -196 °C and catalytic conversion of ethanol and isopropanol at 300-400 °C using micropulse technique. The results obtained revealed that manganese oxides obtained at 400 °C consisted of a mixture of Mn₂O₃ and MnO₂ while the samples calcined at 600 °C composed entirely of Mn₂O₃. Gamma-irradiation resulted in a decrease in the particle size of manganese oxide phases with subsequent increase in their specific surface areas. Gamma-irradiation with 0.2 and 0.8 MGy effected a measurable progressive decrease in the catalytic activity in dehydration and dehydrogenation of both alcohols. However, the treated catalyst retained their initial activity upon exposure to a dose of 1.6 MGy. Also, g-irradiation increased the selectivities of the investigated solids towards dehydrogenation of both alcohols. The catalyst samples precalcined at 600 °C exhibited higher catalytic activities than those precalcined at 400 °C.     

Thermal behaviour of ground and unground acid leached vermiculite

Acid leaching of vermiculite is an interesting procedure to prepare high surface area porous silica. Thermal behaviour of unground and ground vermiculite leached with HCl solutions has been studied by TG, DTA, ETA and high temperature XRD. Important differences have been observed in the thermal behaviour of unground and ground vermiculite after the acid treatments. Thus, for the acid-treated unground vermiculite, dehydrated vermiculite, enstatite and cristobalite were formed during the heating, while for the acid-treated ground vermiculite only iron oxides and cristobalite phases were observed. Structural modifications due to acid treatment were responsible for changes in the transport properties determined by ETA for the vermiculite samples.     

酸洗Pt-Fe和Pt-Co催化剂在CO氧化反应中的对比研究

负载型纳米催化剂表面结构与其催化性能之间关系的研究一直受到广泛关注.由于其结构复杂使得人们在研究催化剂构效关系时遇到了很多困难.近年来,大量研究发现反转催化剂在众多反应中表现出优越的催化性能.反转催化剂是将过渡金属氧化物负载于其它金属表面.和传统金属/氧化物催化剂相比,反转催化剂更能突出氧化物在催化反应中的重要作用.众多研究表明,在氧化物-金属界面处存在特殊的作用,这种作用可以改变氧化物的电子特性和化学性质,进而产生较高的催化性能.傅强等人创建了金属氧化物负载于Pt表面的反转催化体系,其表现出了高的低温CO氧化反应性能.在氧化物和Pt之间的界面限域效应可以稳定氧化物中配位不饱和的金属阳离子.这种配位不饱和的氧化物提供了活化O2的活性位.目前,反转催化剂的研究主要集中在单晶模型体系中,在负载型催化剂中的研究还较少.我们以炭黑(CB)为载体,将还原后的Pt-Fe和Pt-Co催化剂经过酸洗制备了一种表面富Pt核为合金的结构.考察了酸洗后的Pt-Fe和Pt-Co催化剂经过不同温度氧化后的结构变化,并讨论了其结构与CO完全氧化反应(COOX)和CO选择氧化反应(CO-PROX)性能的关系.X射线粉末衍射(XRD),电感耦合等离子体发射光谱(ICP),透射电镜(TEM)和X射线光电子能谱(XPS)表征结果表明,还原后的Pt基催化剂经过酸洗可以选择性去除纳米粒子表面的3d过渡金属,形成表面富Pt体相为合金的结构.将酸洗后的Pt-Fe和Pt-Co催化剂在不同温度下空气中氧化,发现近表层的Fe(Co)会扩散到粒子表面上,形成过度氧化的Fe2O3(Co3O4)表面结构.氧化后的催化剂在COOX和CO-PROX反应中表现出截然不同的催化性能.酸洗后的Pt-Fe(Pt-Co)催化剂经过不同温度氧化后在COOX反应中活性都较差,室温下的CO转化率只有不到30%,CO完全转化的温度超过100oC,相当于纯Pt催化剂的活性.这说明Pt表面过度氧化的Fe2O3(Co3O4)对CO氧化反应的促进作用不明显.而氧化后的催化剂在CO-PROX反应中表现出较高的活性,250oC(或350oC)氧化后的酸洗Pt-Fe催化剂室温下的CO转化率接近100%,250oC(或350oC)氧化后的酸洗Pt-Co催化剂室温下的CO转化率也达到了70%.结合表征和反应结果,我们认为氧化处理形成的表面过度氧化的金属氧化物(Fe2O3,Co3O4)在COOX的催化性能较差.通入CO-PROX反应气后,气氛中大量H2的存在和Pt表面的氢溢流效应可以使得表面Fe2O3,Co3O4在室温下被还原成配位不饱和的FeO,CoO.这种配位不饱和的氧化物在表面Pt的限域作用和大量H2气氛下比较稳定,并且具有较强的活化解离O2的能力,进而提高了CO-PROX反应的活性.为了进一步证实催化剂表面氧化物与其催化性能的关系,我们在室温下进行了两种反应气的循环实验测试.测试结果表明,对于氧化后的酸洗Pt-Fe催化剂,COOX反应中的表面Fe2O3和CO-PROX反应中的表面FeO可以通过变换反应气氛实现两种氧化物的相互转变,并表现出完全不同的催化性能.对于氧化后的酸洗Pt-Co催化剂,CO-PROX反应中形成的CoO表面结构在COOX反应中也比较稳定,在两种反应气中表现出相似的催化性能.     

Voltammetric determination of heavy metals leached from ceramics

Anodic stripping voltammetry using a mercury film electrode (MFE) and hanging mercury drop electrode (HMDE) was applied for the determination of trace amounts of lead, cadmium, zinc and copper leached from plates by 4% acetic acid standard solution. The use of a MFE, the fast scan rate (1000 mV/s) by DC voltammetry with subtraction of background current allowed to determine low concentrations of heavy metals. The amounts of metals leached from ware were Pb: 0.1 to 25, Cd: 0.015 to 0.44, Zn: 0.07 to 1.06, Cu: 0.14 to 0.40 μg/mL, depending on the kind of plate and manufacture. Determinations of copper and zinc were carried out using the HMDE electrode in the leachate, determination of tin after medium exchange, and thallium after complexing of lead by EDTA. A significant decrease of metals leached during the second leaching and after washing with detergent solution was found for plates with overglaze decoration. Received: 5 November 1997 / Revised: 24 February 1998 / Accepted: 26 February 1998     

Epoxidation of alkenes and oxidation of alcohols with hydrogen peroxide catalyzed by a manganese(V) nitrido complex

The manganese(V) nitrido complex (PPh(4))(2)[Mn(N)(CN)(4)] is an active catalyst for alkene epoxidation and alcohol oxidation using H(2)O(2) as an oxidant. The catalytic oxidation is greatly enhanced by the addition of just one equivalent of acetic acid. The oxidation of ethene by this system has been studied computationally by the DFT method.     

The structure and catalytic activity of anatase and rutile titania supported manganese oxide catalysts for selective catalytic reduction of NO by NH3

The structure and catalytic properties of anatase and rutile supported manganese oxide catalysts prepared by impregnation method have been studied by using X-ray diffraction (XRD), laser Raman spectroscopy (LRS), X-ray photoelectron spectroscopy (XPS), H(2) temperature-programmed reduction (H(2)-TPR) and BET surface area measurements combined with activity testing of selective catalytic reduction (SCR) of NO by NH(3). It has been shown that the manganese oxide loadings on the two TiO(2) supports exert great influences on the SCR activity. For the rutile supported manganese oxide catalysts, increasing manganese oxide loading leads to the increase of reducibility of dispersed manganese oxide species and the rate constant k, which reaches a maximum around 9.6 × 10(-6) mol g(Mn)(-1) s(-1) at 0.5 mmol Mn per 100 m(2) TiO(2). When the manganese oxide loading is beyond this value, the existence of amorphous MnO(x) multiple layers will certainly reduce the ratio of manganese oxide species exposed on the surface and the reducibility of dispersed manganese oxide species, resulting in the rapid decrease of rate constant k. The LRS and XPS results have revealed that for the anatase supported manganese oxide catalysts manganese oxide species exist in Mn(+4) as a major species with Mn(+3) species and partially undecomposed Mn-nitrate as the minor species. Under the SCR reaction conditions, Mn(+3) species on anatase are oxidized to Mn(+4) species, inserting in the surface of anatase and promoting the anatase-to-rutile transformation in the surface layers of the anatase support. Since these Mn(4+) cations are actually dispersed on the support with a rutile shell-anatase core structure and its concentration is very near to that of MnO(x)/TiO(2) (R) catalyst, the relation between the rate constant k and the MnO(x) loading on the anatase support is similar to that on the rutile support, and that the rate constant k values for anatase and rutile supported manganese oxide catalysts are very close at the same MnO(x) loading.     

Synthesis of high surface area Al-containing mesoporous silica from calcined and acid leached kaolinites as the precursors

Al-containing mesoporous silicas were synthesized by hydrothermal treatment of microporous silica prepared by selectively acid leached metakaolinites with Si/Al = 3.9-92.5 mixed with a surfactant of cetyltrimethylammonium bromide (CTABr). The specific surface area of the products increased with higher surfactant/microporous silica (surf/Si) ratio and Si/Al ratio of the microporous silica, reaching about 1400 m2/g at CTABr/Si 0.1 and Si/Al 40. The XRD patterns of these products show a hexagonal (100) peak with the lattice parameter a0=4.2-4.3 nm and the N2 adsorption isotherms show steep increase of adsorption between relative pressure of 0.3 and 0.4. Hexagonal mesoporous microstructure is observed by high resolution TEM. The pore size distributions of the products show a sharp peak at 2.8 nm by the BJH method. The high specific surface area of the present mesoporous samples is attributed to the lower matrix density and surface roughness of mesopore wall. The highest specific surface area of the products reached up to 1420 m2/g and this value is apparently higher than those reported in hexagonal mesoporous silicas. A unique microporous structure of the starting material is thought to be related to achieve such a high specific surface area of the products.     

Heat treatment parameters of preparing glass-ceramic with electrolytic manganese residue and their properties

Journal of Thermal Analysis and Calorimetry - Electrolytic manganese residue (EMR) is a harmful waste that is largely generated during the manufacturing of manganese powder but rarely used. In this...     

Bioinspired manganese complexes catalyzed epoxidation for the synthesis of the epoxyketone fragment of carfilzomib

We report herein an efficient catalytic epoxidation reaction for the synthesis of epoxyketone (tert-butyl ((S)-4-methyl-1-((R)-2-methyloxiran-2-yl)-1-oxopentan-2-yl)carbamate), which is an important synthetic intermediate of carfilzomib.     

制备方法对氧化锰八面体分子筛的NH_3选择性催化还原NO_x性能的影响

采用不同方法制备了一系列氧化锰八面体分子筛(OMS-2)催化剂,考察了制备方法对其低温NH3-SCR催化性能的影响,并采用BET、XRD、Raman、H2-TPR、XPS和TEM等手段对催化剂的物化性质进行表征。结果表明,OMS-2催化剂在50~150℃时其低温SCR活性明显优于MnOx催化剂,OMS-2催化剂在120℃时NOx转化率接近100%。此外,不同的制备方法对OMS-2催化剂的SCR脱硝活性影响明显。其中,固相法制备的OMS-2催化剂的SCR活性最佳。H2-TPR测试结果表明,OMS-2更容易发生氧化还原反应,MnOx还原峰对应的温度较高。XRD、TEM和XPS分析结果表明,低结晶度和高分散性的无定形催化剂有利于低温SCR反应,较高的表面晶格氧和无定形MnO2物种是OMS-2催化剂具有优异低温SCR活性的主要原因。     

Systematic studies on adsorption of lead on sea nodule residues

Lead adsorption from aqueous solutions was studied with the aim of detoxifying industrial effluents before their safe disposal onto land or into river waters. Sea nodule residue (SNR), a waste material containing oxides and oxyhydroxides of manganese, iron, silicon, etc., was used as an effective adsorbent for lead in this study. The effect of various parameters such as contact time, initial lead concentration, pulp density, particle size of the adsorbent, pH, and temperature was studied to optimize the conditions for maximum adsorption. Adsorption followed first-order kinetics and 99% of lead adsorption was achieved at a solid:liquid ratio of 1:330, in the pH range 5.5-6.0 at a particle size of -150 microm in 8 h for solution containing 200 ppm lead. The adsorption capacity was found to be 99.0 mg of lead per gram of SNR and the adsorption isotherms followed the Langmuir and Freundlich adsorption models. The mechanism of adsorption of lead onto the sea nodule residue was also investigated. It was possible to reduce the lead level from 25-200 ppm to acceptable levels (0.1 ppm) by adsorption over this solid waste.