Preparation and characterization of bifunctional, Fe3O4/ZnO nanocomposites and their use as photocatalysts

Bifunctional magnetic-optical Fe₃O₄/ZnO nanocomposites with different molar ratio were successfully synthesized by a facile two-step strategy. Compared with the other methods, it was found to be mild, inexpensive, green, convenient and efficient. Fe₃O₄ nanocrystal was used as seed for the deposit and growth of ZnO nanoparticle. A series of the characterizations manifested that the combination of Fe₃O₄ with ZnO nanoparticles was successful. Photocatalytic activity studies confirmed that as-prepared nanocomposites had excellent photodegradating behavior to Methyl Orange (MO) compared to the pure ZnO nanoparticles. The results showed that the degradation percentage of MO was about 93.6% for 1 h when the amount of catalyst was 0.51 g L⁻¹ and initial concentration of MO was 6 × 10⁻⁵ mol L⁻¹ in the pH 7 solution. Moreover, the kinetics of photocatalytic degradation reaction could be expressed by the first-order reaction kinetic model. Furthermore, the Fe₃O₄/ZnO nanocomposites could be also served as convenient recyclable photocatalysts because of their magnetic properties.     

A Study on the Rheological and Magnetic Properties of Polymer-Bonded Magnets Using Polycarbonate as the Bonding Material

The effect of three metal oxides on the magnetic properties of polymer bonded magnets (PBMs) was studied. The three PBMs, using polycarbonate (PC) as binder and 5 wt% of Fe₃O₄, Fe₂O₃, or CuO nanoparticles, were prepared by melt extrusion in a twin screw extruder followed by compression molding. Transmission electron microscopic (TEM) images showed a better dispersion for the PC/Fe₃O₄ nanocomposite compared with that of the other nanocomposites. The dynamic intersection frequency (ω_c), which is related to the crossing of the G′ and G^″ curves, showed that there was more homogeneity in the PC/Fe₃O₄ and PC/Fe₂O₃ nanocomposites. The curves of saturation magnetization for the three nanocomposites showed that there was a relationship between the magnetic properties and the homogeneity of the nanoparticles studied by rheometry. Because the magnetic strength of PC/Fe₃O₄ was greater than that of the other nanocomposites, it was concluded that not only the intrinsic magnetic property of the filler was an important factor to increase the magnetic property, but also the homogeneity of the filler within the matrix had an important role.     

Green synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

In this paper, we have first demonstrated a facile and green synthetic approach for preparing superparamagnetic Fe₃O₄ nanoparticles using α-d-glucose as the reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant. The X-ray powder diffraction (XRD), X-ray photoelectron spectrometry (XPS), and selected area electron diffraction (SAED) results showed that the inverse spinel structure pure phase polycrystalline Fe₃O₄ was obtained. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results exhibited that Fe₃O₄ nanoparticles were roughly spherical shape and its average size was about 12.5 nm. The high-resolution TEM (HRTEM) result proved that the nanoparticles were structurally uniform with a lattice fringe spacing about 0.25 nm, which corresponded well with the values of 0.253 nm of the (3 1 1) lattice plane of the inverse spinel Fe₃O₄ obtained from the JCPDS database. The superconducting quantum interference device (SQUID) results revealed that the blocking temperature (T_b) was 190 K, and that the magnetic hysteresis loop at 300 K showed a saturation magnetization of 60.5 emu/g, and the absence of coercivity and remanence indicated that the as-synthesized Fe₃O₄ nanoparticles had superparamagnetic properties. Fourier transform infrared spectroscopy (FT-IR) spectrum displayed that the characteristic band of Fe-O at 569 cm⁻¹ was indicative of Fe₃O₄. This method might provide a new, mild, green, and economical concept for the synthesis of other nanomaterials.     

Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Microwave-assisted synthesis and magnetic property of magnetite and hematite nanoparticles

Nanoparticles of magnetite (Fe₃O₄) and hematite (α-Fe₂O₃) have been prepared by a simple microwave heating method using FeCl₃, polyethylene glycol and N₂H₄·H₂O. The amount of N₂H₄·H₂O has an effect on the final phase of Fe₃O₄. The morphology of α-Fe₂O₃ was affected by the heating method. Crystalline α-Fe₂O₃ agglomerates were formed immediately at room temperature and most of these nanoparticles within agglomerates show the same orientation along [110] direction. After microwave heating, ellipsoidal α-Fe₂O₃ nanoparticles were formed following an oriented attachment mechanism. Both Fe₃O₄ and α-Fe₂O₃ nanoparticles exhibit a small hysteresis loop at room temperature.     

Electromagnetic and mechanical properties of Fe3O4-coated amorphous carbon nanotube/polyvinyl chloride composites

Electromagnetic wave absorbing properties of absorbing composites depend on the dielectric and magnetic loss generally. In this paper, using Fe₃O₄-coated amorphous carbon nanotubes (ACNTs-Fe₃O₄) fabricated using a chemical synthesis–hydrothermal treatment method as an absorber and polyvinyl chloride (PVC) as a matrix, electromagnetic and mechanical properties of ACNT-Fe₃O₄/PVC composite were investigated. The results showed that the dielectric and magnetic losses of ACNT-Fe₃O₄/PVC composite were significantly enhanced in 8.2–12.4 GHz compared to ACNT/PVC composite, which improved absorbing properties, while slightly changing the mechanical properties.     

Preparation of spherical and uniform-sized ferrite nanoparticles with diameters between 50 and 150 nm for biomedical applications

Spherical uniform-sized iron ferrite nanoparticles were synthesized by adding a disaccharide and seed ferrite crystals into an aqueous reaction solution. The average size range 50-150 nm was controlled by choosing one out of five disaccharides and by changing the amount of the seed crystals. The particles had a saturation magnetization and a crystalline structure which are similar to those of intermediate Fe₃O₄-γ-Fe₂O₃. When coated with citrate, the particles with nearly 100 nm diameter were stably suspended in water for 2 days. These novel particles will be utilized as magnetic carriers in biomedical applications.     

Preparation and magnetic properties of BaFe12O19/Ni0.8Zn0.2Fe2O4 nanocomposite ferrite

Nanocomposite of hard (BaFe₁₂O₁₉)/soft ferrite (Ni_0.8Zn_0.2Fe₂O₄) have been prepared by the sol–gel process. The nanocomposite ferrite are formed when the calcining temperature is above 800 °C. It is found that the magnetic properties strongly depend on the presintering treatment and calcining temperature. The “bee waist” type hysteresis loops for samples disappear when the presintering temperature is 400 °C and the calcination temperature reaches 1100 °C owing to the exchange-coupling interaction. The remanence of BaFe₁₂O₁₉/Ni_0.8Zn_0.2Fe₂O₄ nanocomposite ferrite with the mass ratio of 5:1 is higher than a single phase ferrite. The specific saturation magnetization, remanence magnetization and coercivity are 63 emu/g, 36 emu/g and 2750 G, respectively. The exchange-coupling interaction in the BaFe₁₂O₁₉/Ni_0.8Zn_0.2Fe₂O₄ nanocomposite ferrite is discussed.     

Preparation and application of polymer-grafted magnetic nanoparticles for lipase immobilization

Functionalized superparamagnetic particles were prepared by graft polymerization of glycidyl methacrylate and methacryloxyethyl trimethyl ammonium chloride onto the surface of modified-Fe₃O₄ nanoparticles. The resultant particles were characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The results indicate that the polymer chains had been effectively grafted onto the surface of Fe₃O₄ nanoparticles. The functionalized particles remained dispersive and superparamagnetic. Lipase was immobilized on the magnetic particles under mild conditions by electrostatic adsorption and covalent binding with the activity recovery up to 70.4%. The immobilized lipase had better thermal stability compared to free lipase.     

Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

Fe₃O₄/PMMA composite particles were fabricated by a simple one-pot hydrothermal method. The magnetic measurement showed that the composite particles displayed a higher saturated magnetization and superparamagnetic property. The rheological properties of the magnetorheological fluids (MRFs) based on Fe₃O₄/PMMA particles were measured on a rotational rheometer with a magnetic field generator. It was found that the MRFs exhibited better MR effect and sendimentary stability than the similar materials.     

Thermal and irradiation induced interdiffusion in magnetite thin films grown on magnesium oxide (0 0 1) substrates

Epitaxial Fe₃O₄(0 0 1) thin films (with a thickness in the range of 10-20 nm) grown on MgO substrates were characterized using low-energy electron diffraction (LEED), conversion electron Mössbauer spectroscopy (CEMS) and investigated using Rutherford backscattering spectrometry (RBS), channeling (RBS-C) experiments and X-ray reflectometry (XRR). The Mg out-diffusion from the MgO substrate into the film was observed for the directly-deposited Fe₃O₄/MgO(0 0 1) films. For the Fe₃O₄/Fe/MgO(0 0 1) films, the Mg diffusion was prevented by the Fe layer and the surface layer is always a pure Fe₃O₄ layer. Annealing and ion beam mixing induced a very large interface zone having a spinel and/or wustite formula in the Fe₃O₄-on-Fe film system.     

Fabrication, characterization and measurement of thermal conductivity of Fe3O4 nanofluids

Magnetite Fe₃O₄ nanoparticles were synthesized by a co-precipitation method at different pH values. The products were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electronic microscopy. Their magnetic properties were evaluated on a vibrating sample magnetometer. The results show that the shape of the particles is cubic and they are superparamagnetic at room temperature. Magnetic nanofluids were prepared by dispersing the Fe₃O₄ nanoparticles in water as a base fluid in the presence of tetramethyl ammonium hydroxide as a dispersant. The thermal conductivity of the nanofluids was measured as a function of volume fraction and temperature. The results show that the thermal conductivity ratio of the nanofluids increases with increase in temperature and volume fraction. The highest enhancement of thermal conductivity was 11.5% in the nanofluid of 3 vol% of nanoparticles at 40 °C. The experimental results were also compared with the theoretical models.     

Fe3O4薄膜的电输运及光诱导特性研究

用脉冲激光沉积法在(111)Si衬底上成功制备了高度择优取向的Fe₃O₄薄膜.电阻-温度关系表明Fe₃O₄薄膜的Verwey转变(T_V)约在122 K,低温段(T_V)输运特征满足Mott变程跳跃模型,高温段(T>T_V)为小极化子输运.激光作用下的光电导实验发现,在整个温区表现为光致电阻率减小,而且低温段的电阻变化率比高温段要大很多.分析认为Fe₃O₄薄膜的光致电阻率变化主要与激光激发t_2g电子的转移有关. 关键词： 3O₄薄膜')" href="#">Fe₃O₄薄膜 小极化子 光诱导特性     

Silane treatment of Fe3O4 and its effect on the magnetic and wear properties of Fe3O4/epoxy nanocomposites

In this study, the effect of silane treatment of Fe₃O₄ on the magnetic and wear properties of Fe₃O₄/epoxy nanocomposites was investigated. Fe₃O₄ nanopowders were prepared by coprecipitation of iron(II) chloride tetrahydrate with iron(III) chloride hexahydrate, and the surfaces of Fe₃O₄ were modified with 3-aminopropyltriethoxysilane. The magnetic properties of the powders were measured on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites using SQUID magnetometer. Wear tests were performed on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites under the same conditions (sliding speed: 0.18 m/s, load: 20 N).The results showed that the saturation magnetization (M_s) of surface-modified Fe₃O₄/epoxy nanocomposites was approximately 110% greater than that of unmodified Fe₃O₄/epoxy nanocomposites. This showed that the specific wear rate of surface-modified Fe₃O₄/epoxy nanocomposites was lower than that of unmodified Fe₃O₄/epoxy nanocomposites. The decrease in wear rate and the increase in magnetic properties of surface-modified Fe₃O₄/epoxy nanocomposites occurred due to the improved dispersion of Fe₃O₄ into the epoxy matrix.     

Preparation of photocatalytic Fe2O3-TiO2 coatings in one step by metal organic chemical vapor deposition

There are two major difficulties in the TiO₂ liquid-solid photocatalytic system: effective immobilization of the TiO₂ particles; and improving the catalytic activity under visible light. To simultaneously solve these two problems, Fe₂O₃-TiO₂ coatings supported on activated carbon fiber (ACF), have been prepared in one step by a convenient and efficient method—metal organic chemical vapor deposition (MOCVD). XRD results revealed that Fe₂O₃-TiO₂ coatings mainly composed of anatase TiO₂, α-Fe₂O₃ phases and little Fe₂Ti₃O₉. The pore structure of ACF was preserved well after loading with Fe₂O₃-TiO₂ coatings. UV-vis diffuse reflectance spectra showed a slight shift to longer wavelengths and an enhancement of the absorption in the visible region for Fe₂O₃-TiO₂ coatings, compared to the pure TiO₂ sample. A moderate Fe₂O₃-TiO₂ loading (13.7 wt%) was beneficial to mineralizing wastewater because the intermediates could be adsorbed onto the surface of photocatalyst following decomposition. The stable performance revealed that the Fe₂O₃-TiO₂ coatings were strongly adhered to the ACF surface, and the as prepared catalysts could be reused showing potential application for wastewater treatment.     

Preparation of Bi2Fe4O9 particles by hydrothermal synthesis and functional properties

In the present study, particles with different Bi₂Fe₄O₉ micro/nanostructures with a few particular morphologies (flower-like nanoplatelets, hierarchical microstructures, perfectly square platelets single crystals, etc.) obtained under specific hydrothermal synthesis conditions were investigated. The role of the processing parameters (such as NaOH concentration, reaction temperature, and reaction duration time) on the phase formation mechanism and on the microstructural characteristics was investigated. All the Bi₂Fe₄O₉ morphologies showed orthorhombic symmetry with space group Pbam. The photocatalytic properties and magnetic behavior as a function of the micro/nanostructural characteristics of various Bi₂Fe₄O₉ powders were determined. In the presence of Bi₂Fe₄O₉, a degradation rate of Rose Bengal in the range of 52–61% was determined after 180?min under UV light irradiation (λ?=?254?nm). Magnetic activity with antiferromagnetic behavior and a transition at ～240?K slightly dependent on the microstructures was found. The role of Bi₂Fe₄O₉ microstructures in the photocatalytic activity and magnetic properties was discussed.     

Synthesis and microwave absorption properties of graphene-oxide(GO)/polyaniline nanocomposite with Fe3O4 particles

In order to investigate the impedance matching properties of microwave absorbers,the ternary nanocomposites of GO/PANI/Fe₃O₄（GPF） are prepared via a two-step method,GO/PANI composites are synthesized by dilute polymerization in the presence of aniline monomer and GO,and GO/PANI/Fe₃O₄ is prepared via a co-precipitation method.The obtained nanocomposites are characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）,and Fourier transform infrared spectroscopy（FTIR）,respectively.The microwave absorbability reveals enhanced microwave absorption properties compared with GO,PANI,and GO/PANI.The maximum reflection loss of GO/PANI/Fe₃O₄ is up to-27 dB at 14 GHz with its thickness being 2 mm,and its absorption bandwidths exceeding-10 dB are more than 11.2 GHz with its thickness values being in the range from 1.5 mm-4 mm.It provides that GO/PANI/Fe₃O₄ can be used as an attractive candidate for microwave absorbers.     

Synthesis and magnetic properties of hard magnetic (CoFe2O4)-soft magnetic (Fe3O4) nano-composite ceramics by SPS technology

CoFe₂O₄/Fe₃O₄ nano-composite ceramics were synthesized by Spark Plasma Sintering. The X-ray diffraction patterns show that all samples are composed of CoFe₂O₄ and Fe₃O₄ phases when the sintering temperature is below 900 °C. It is found that the magnetic properties strongly depend on the sintering temperature. The two-step hysteresis loops for samples sintered below 500 °C are observed, but when sintering temperature reaches 500 °C, the step disappears, which indicates that the CoFe₂O₄ and Fe₃O₄ are well exchange coupled. As the sintering temperature increases from 500 to 800 °C, the results of X-ray diffractometer indicate the constriction of crystalline regions due to the ion diffusion at the interfaces of CoFe₂O₄/Fe₃O₄ phases, which have great impact on the magnetic properties.     

Neutron powder diffraction and magnetic studies of mesoporous Co3O4

Samples of mesoporous Co₃O₄, created by using mesoporous silicas KIT-6 and SBA-16 as hard templates to control the growth of Co₃O₄ have been investigated with SQUID magnetometry and neutron powder diffraction, to reveal the effects of high surface area on the magnetic and electronic properties. DC magnetic susceptibility measurements show lower Néel ordering temperatures and lower magnetic moments than in a “bulk” reference. A lower second transition temperature is also observed in the mesoporous samples, associated with the freezing of the surface (shell) magnetic moments. Measurements taken with increasing applied field at constant temperature show the materials to be antiferromagnetic as expected. Complementary parametric neutron powder diffraction studies show similar trends between the two mesoporous samples when looking at their Néel temperatures, and verify long range order within the samples.