Structural,magnetic and magnetocaloric properties of AMn1−xGaxO3 compounds with 0≤x≤0.2

Structural, magnetic and magnetocaloric properties of manganites series with the AMn_1−xGa_xO₃ (A=La_0.75Ca_0.08Sr_0.17 and x=0, 0.05, 0.1 and 0.2) composition have been investigated to shed light on Ga-doping influence. Solid-state reaction method was used for preparation. From XRD study, all samples are found single phase and crystallize in the orthorhombic structure with the Pnma space group. The variation of the magnetization M vs. temperature T, under an applied magnetic field of 0.05 T, reveals a ferromagnetic–paramagnetic transition for all samples. The experimental results indicate that T_C decreases from 336 to 135 K with increasing Ga substitution. Magnetocaloric effect (MCE) was estimated, in terms of isothermal magnetic entropy change (−ΔS_M), using the M(T, μ₀H) data and employing the thermodynamic Maxwell equation. The maximum entropy change and Relative Cooling Power (RCP) show non-monotonic behaviors with increasing the concentration of Gallium. In fact, the maximum value of ΔS_Mmaxof AMn_1−xGa_xO₃ for x=0.00 and 0.2 samples is found to be, respectively, 2.87 and 1.17 J/kg/K under an applied magnetic field change of 2 T. For the same applied magnetic field (μ₀H=2 T), the RCP values are found to vary between 97.58 and 89 J/kg.     

Magnetic/structural diagram, chemical composition-dependent magnetocaloric effect in self-doped antipervoskite compounds Sn1−xCMn3+x (0≤x≤0.40)

The effects of Mn substitutions on the crystal structure, magnetic properties, and magnetocaloric effect (MCE) of antiperovskite Sn_1−xCMn_3+x (0≤x≤0.40) have been investigated detailedly. Both the Curie temperature (T_C) and the magnetizations at 40 kOe decrease with increasing x firstly for x≤0.10, and then increase with increasing x further. The type of magnetic transition changes from first-order to second-order around x=0.10 with increasing x. Chemical composition-dependent MCE is also studied around T_C. With increasing x, the maximal magnetic entropy changes decrease and the magnetic phase transitions broaden. Accordingly, the relative cooling power (RCP) increases with increasing x, reaching the largest values of ∼0.56 J/cm³ (∼75 J/kg) and ∼1.66 J/cm³ (∼221 J/kg) with the magnetic changes of 20 kOe and 48 kOe, respectively. Considering the large RCP, inexpensive, and innoxious raw materials, these serial samples Sn_1−xCMn_3+x are suggested to be potential room-temperature magnetic refrigerant materials.     

A model for the band gap energy of the N-rich GaN1−xAsx (0<x≤0.07) and the As-rich GaN1−xAsx (0.95≤x≤1)

In this paper, a model for the band gap energy of the N-rich GaNAs (0<x≤0.07) and the As-rich GaNAs (0.95<x≤1) is developed. For the N-rich GaNAs, The parameters describing the variation of the CBM and the VBM in the N-rich GaNAs are obtained by fitting the experimental data. For the As-rich GaNAs, the parameters in the model are obtained by fitting the experimental data of the band gap energy. It is found that the band gap evolution of the N-rich energy is different from that of the As-rich band gap energy. The model may be used to calculate the band gap energy of other dilute group III-N–V nitrides.     

Effect of Cr on the magnetic properties of evaporated CoxCr1−x/Si(1 0 0) and CoxCr1−x/glass thin films

Series of Co_xCr_1−x thin films have been evaporated under vacuum onto Si(1 0 0) and glass substrates. Thickness ranges from 17 to 220 nm, and x from 0.80 to 0.88. Alternating gradient field magnetometer (AGFM) measurements provided saturation magnetization values ranging from 220 to 1200 emu/cm³. Values of squareness exceeding 0.8 have been measured. Coercive field may reach values up to 700 Oe, depending on the percentage of chromium, as well as the substrate nature and the direction of the applied magnetic field. The saturation magnetization value decreases as the Cr content increases. In order to study their dynamical magnetic properties, Brillouin Light Scattering (BLS) measurements have been performed on these samples. Stiffness constant value and anisotropy magnetic field were adjusted to fit the experimental BLS spectra. These results are analyzed and correlated.     

Structural studies of evaporated CoxCr1−x/Si (1 0 0) and CoxCr1−x/glass thin films

Series of Co_xCr_1−x thin films have been evaporated under vacuum onto Si (1 0 0) and glass substrates. Chemical composition and interface properties have been studied by modelling Rutherford backscattering spectra (RBS) using SIMNRA programme. Thickness ranges from 17 to 220 nm, and x from 0.80 to 0.88. Simulation of the energy spectra shows an interdiffusion profile in the thickest films, but no diffusion is seen in thinner ones. Microscopic characterizations of the films are done with X-ray diffraction (XRD) measurements. All the samples are polycrystalline, with an hcp structure and show a 〈0 0 0 1〉 preferred orientation. Atomic force microscopies (AFM) reveal very smooth film surfaces.     

Nonmonotonic variation of magnetization in Bi0.8La0.2−xPbxFeO3 (0≤x≤0.2) multiferroics

Systematic studies of crystalline structure, magnetic and ferroelectric properties have been performed on polycrystalline Bi_0.8La_0.2−xPb_xFeO₃ ceramic samples, in which x changes continuously from 0 to 0.2. Rietveld refinement of the x-ray diffraction (XRD) patterns shows that the compound crystal structure changes gradually from pseudotetragonal to pseudocubic with increasing Pb concentration. Coupled with the structural and compositional changes, magnetic ordering of the samples exhibits significantly non-monotonical variation corresponding to x. The compound remnant magnetization (M_r) and coercivity (H_c) both reach minimum values close to zero at x=0.07. This variation of magnetic property in co-doped samples can be attributed to the extent of suppression of cycloid spin structure in original BiFeO₃ with changing x. Unlike magnetic responses, the ferroelectric measurements show that the compounds have monotonical change in the remnant electric dipole polarization (P_r).     

Electronic structure and ferromagnetism of polycrystalline Zn1−xCoxO (0≤x≤0.15)

The electronic structure of polycrystalline ferromagnetic Zn_1−xCo_xO (0.05≤x≤0.15) and the oxidation state of Co in it, have been investigated. The Co-doped polycrystalline samples are synthesized by a combustion method and are ferromagnetic at room temperature. XPS and optical absorption studies show evidence for Co²⁺ ions in the tetrahedral symmetry, indicating substitution of Co²⁺ in the ZnO lattice. However, powder XRD and electron diffraction data show the presence of Co metal in the samples. This give evidence to the fact that some Co²⁺ ion are incorporated in the ZnO lattice which gives changes in the electronic structure whereas ferromagnetism comes from the Co metal impurities present in the samples.     

The magnetic behavior of La1−xTbxMn2Si2 (0≤x≤0.3) in weak magnetic fields

The structure and magnetic properties of La_1−xTb_xMn₂Si₂ (0≤x≤0.3) were studied by X-ray powder diffraction and DC magnetization measurements. All the compounds crystallize in ThCr₂Si₂-type structure. Substitution of Tb for La led to a linear decrease in the lattice constants and the unit-cell volume. A ferromagnetic phase for x≤0.15, and an antiferromagnetic phase for x=0.3 have been observed at about room temperature, whereas the compounds with x=0.2 and 0.25 exhibit a magnetic phase transition from ferromagnetism to antiferromagnetism.     

Sn1−xBixO2 and Sn1−xTaxO2 (0≤x≤0.75): A first-principles study

The structural, elastic, electronic and optical (x=0) properties of doped Sn_1−xBi_xO₂ and Sn_1−xTa_xO₂ (0≤x≤0.75) are studied using the first-principles pseudopotential plane-wave method within the local density approximation. The independent elastic constants C_ij and other elastic parameters of these compounds have been calculated for the first time. The mechanical stability of the compounds with different doping concentrations has also been studied. The electronic band structure and density of states are calculated and the effect of doping on these properties is also analyzed. It is seen that the band gap of the undoped compound narrowed with dopant concentration, which disappeared for x=0.26 for Bi doping and 0.36 for Ta doping. The materials thus become conductive oxides through the change in the electronic properties of the compound for x≤0.75, which may be useful for potential application. The calculated optical properties, e.g. dielectric function, refractive index, absorption spectrum, loss-function, reflectivity and conductivity of the undoped SnO₂ in two polarization directions are compared with both previous calculations and measurements.     

Estimating the cation distributions in the spinel ferrites Cu0.5−xNi0.5ZnxFe2O4 (0.0≤x≤0.5)

Ferrite samples of the composition Cu_0.5−xNi_0.5Zn_xFe₂O₄ (0.0≤x≤0.5) were synthesized by chemical co-precipitation. The samples exhibited a single phase cubic spinel structure, and the saturation magnetization of the samples was found to increase with increasing Zn content. Using a quantum mechanical method proposed by our group, the cation distributions in the samples were estimated. Estimated cation distributions obtained by fitting the magnetic moments of the samples were then used to perform Rietveld fitting for X-ray diffraction patterns. The acceptable error parameters in the Rietveld fitting indicate that the estimated cation distributions in the samples are reasonable.     

Disorder induced ferromagnetism in the Cu-doped molybdate SrMo1−xCuxO3 (0≤x≤0.20)

The effect of Cu-doping at Mo-site on structural, magnetic, electrical transport and specific heat properties in molybdates SrMo_1−xCu_xO₃ (0≤x≤0.2) has been investigated. The Cu-doping at Mo-site does not change the space group of the samples, but decreases the structural parameter a monotonously. The magnetic properties change from Pauli-paramagnetism for x=0 to exchange-enhanced Pauli-paramagnetism for x=0.05 and 0.10, and then ferromagnetism for x=0.15 and 0.20. All samples exhibit metallic-like transport behavior in the whole temperature range studied. The magnitude of resistivity increases initially to x=0.10 and then decreases with increasing Cu-doping concentration. The results are discussed according to the electron localization due to the disorder effect induced by the random distribution of Cu at Mo site in the samples. In addition, the temperature dependence of specific heat for the Cu-doped sample has also been studied.     

Structural, transport, and magnetic properties in the Ti-doped manganites LaMn1−xTixO3 (0≤x≤0.2)

The magnetism and transport properties of the samples LaMn_1−xTi_xO₃ (0≤x≤0.2) were investigated. All samples show a rhombohedral structure () at room temperature. The sample with x=0 undergoes the paramagnetic-ferromagnetic (PM-FM) transition accompanied by an insulator-metal (I-M) transition due to the oxygen excess. The doped samples show ferromagnetism and cluster behavior at low temperatures. Though no I-M transition associated with the PM-FM transition appears, the magnetoresistance (MR) effect was observed especially at low temperatures under the applied fields of 0.5 T. Due to the fact that the oxygen content in the Ti-doped samples is nearly stochiometry (3.01) and the Hall resistivity at room temperature is negative, the ferromagnetism in LaMn_1−xTi_xO₃ (0.05≤x≤0.2) is believed to be consistent with the Mn²⁺-O-Mn³⁺ double exchange (DE) mechanism. These results suggest that DE can be obtained by direct Mn-site doping.     

Annealing of thin Zr films on Si1−xGex(0≤x≤1): X-ray diffraction and Raman studies

X-ray diffraction experiments have been combined with Raman scattering and transmission electron microscopy data to analyze the result of rapid thermal annealing (RTA) applied to Zr films, 16 or 80 nm thick, sputtered on Si_1−xGe_x epilayers (0≤x≤1). The C49 Zr(Si_1−xGe_x)₂ is the unique phase obtained after complete reaction. ZrSi_1−xGe_x is formed as an intermediate phase. The C49 formation temperature T_f is lowered by the addition of Ge in the structure. Above a critical Ge composition close to x=0.33, a film microstructure change was observed. Films annealed at temperatures close to T_f are continuous and relaxed. Annealing at T>T_f leads to discontinuous films: surface roughening resulting from SiGe diffusion at film grain boundaries occurred. Grains are ultimately partially embedded in a SiGe matrix. A reduction in the lattice parameters as well as a shift of Raman lines are observed as T exceeds T_f. Both Ge non-stoichiometry and residual stress have been considered as possible origins for these changes. However, as Ge segregation has never been detected, even by using very efficient techniques, it is thought that the changes originate merely from residual stress. The C49 grains are expected to be strained under the SiGe matrix effect and shift of the Raman lines would indicate the stress is compressive. Some simple evaluations of the stress values indicate that it varies between −0.3 and −3.5 GPa for 0≤x≤1 which corresponds to a strain in the range (−0.11, −1.15%). X-ray and Raman determinations are in good agreement.     

Finite size effect on Gd doped CoGdxFe2−xO4 (0.0≤x≤0.5) particles

Nanoparticles of CoGd_xFe_2−xO₄ (where x=0.0, 0.1, 0.3, 0.5) series have been prepared by chemical co-precipitation. The effect of Gd³⁺ ion concentration on crystalline phase, crystallinity, crystallite size, molecular vibrations and magnetic resonance has been investigated in detail. The crystallinity decreases with an increase in Gd³⁺ ion concentration and changes the structural parameters. The spin lattice relaxation has been correlated with the doping ion concentration. Similarly, the superparamagnetic behavior of these particles has been observed with EPR spectroscopy.     

Depth-dependent fct to fcc strain relaxation in CoxNi1−x/Cu3Au(1 0 0) alloy films

Co_xNi_1−x/Cu₃Au(1 0 0) with x ? 11% was prepared at room temperature to study the strain relaxation and their correlation with the spin-reorientation transition. The vertical interlayer distance relaxed from 1.66 Å (fct) to 1.76 Å (fcc) while the thickness increased from 8 ML to 18 ML. Such rapid strain relaxation with thickness was attributed to the larger lattice mismatch between Co_xNi_1−x and Cu₃Au(1 0 0) (η ∼ −6.5%). The smooth change for crystalline structure was observed during strain relaxation process in which the crystalline structure seems irrespective of the alloy composition. To explain the strain relaxation, a phenomenological model was proposed. We provide a physical picture that the deeper layers may not relax while the surface layer start to relax. This assumption is based on the several experimental studies. Using the strain averaged from all layers of thin film as the volume strain of magneto-elastic anisotropy energy, the interrelation between strain relaxation and spin reorientation transition can be well described in a Néel type magneto-elastic model.     

Study of Zn1−xCoxO (0.02≤x≤0.08) dilute magnetic semiconductor prepared by mechanosynthesis route

Single-phase Zn_1−xCo_xO (0.02≤x≤0.08) dilute magnetic semiconductor is prepared by mechanical milling process. The shift of XRD peaks towards the higher angle and a redshift in the band gap compared to the undoped ZnO ensure the incorporation of Co²⁺ ions in the semiconductor host lattice. Pure Zn_xCo_1−xO phases show the paramagnetic behavior in the temperature range 80 K≤T≤300 K. The room temperature volume magnetic susceptibility (χ_v) estimated in case of Zn_0.96Co_0.04O is ∼10⁻⁵ emu/Oe cm³. The temperature dependence of susceptibility χ_v can be fitted well with Curie law confirming the paramagnetic interaction. The observed crystal-field splitting of 3d levels of Co²⁺ ions inside Zn_1−xCo_xO has been successfully interpreted using Curie law.     

Structure and magnetic properties of CoxPb1−x nanowire arrays

Ordered Co_xPb_1−x nanowire arrays embedded in the porous anodic aluminum oxide (AAO) template have been fabricated by electrodeposition. XRD experiments prove that neither hexagonal-close-packed (hcp) nor face-centered-cubic (fcc) Co peaks are detected when the Co component (x) is below 0.91. The coercivity (H_c) and squareness (M_r/M_s) are found to increase with ferromagnetic Co component and the maximum value is at the position x=1 (pure Co nanowires). Annealing effects cause H_c and M_r/M_s increase, which surpasses the pure Co nanowires in the 0.2<x<0.6 at the annealing temperature of 700 °C. Microstructure change during annealing process is proposed to explain the magnetic properties change of samples.     

Influence of Pr-doping on structural, electronic transport, magnetic properties of perovskite molybdates Sr1−xPrxMoO3 (0≤x≤0.15)

The effect of Pr-doping on structural, electronic transport, magnetic properties in perovskite molybdates Sr_1−xPr_xMoO₃ (0≤x≤0.15) has been investigated. The Pr-doping at Sr-site does not change the space group of the samples, but decreases the lattice parameter a. The magnitude of resistivity ρ increases initially (x≤0.08) and then decreases with further increasing Pr-doping level x and ρ(T) behaves as T² and T dependence in the low-temperature range blow T* and high-temperature range of 150 K<T<350 K, related to the electron-electron (e-e) and electron-phonon (e-ph) scattering, respectively. The magnetic susceptibility χ value of the sample increases with increasing x and the χ(T) curve for all samples can be well described by the model of exchange-enhanced paramagnetism. The specific heat magnitude in the low-temperature region increases with increasing Pr-doping level. The specific heat value agrees with the classical Dulong-Petit phonon specific heat, C_cl=3k_BrN_A=124.7 J/mol K in the high-temperature region and the temperature dependence of the specific heat can be well described by the formula C_p(T)/T=γ_e+β_pT² in the low-temperature range. These behaviors can be explained by the competition between the increase in the density of state (DOS) at Fermi energy level and the disorder effect due to Pr-doping.     

Controlled synthesis and magnetic properties of hard magnetic CoxC (x=2, 3) nanocrystals

We report our recent results in synthesis and characterization of cobalt carbide (Co₃C and Co₂C) nanoparticles and nanowires. The synthesis methods were based on a simple one-pot tetraethylene glycol reduction process. By changing the synthesis parameters, the nanocrystal morphology can be adjusted from nanoparticles with different size to nanowires. The magnetic properties of the nanostructure and their correlation to the crystalline structures and the nanoscale morphology have been investigated theoretically and experimentally. It is revealed that the properties are related to both the crystal structures and the morphology.     

Magnetoresistance in La1−xCaxMnO3 (0≤x<0.4)

The magnetic and transport properties of La_1−xCa_xMnO₃ (0≤x<0.4) have been systematically studied. The magnetoresistance (MR) maximum appears at x=0.2-0.25 and the temperature dependence of MR for x>0.25 shows a much broader profile than that of samples for x=0.2-0.25. Based on a scenario in which there is a short-range charge ordering (CO) state coexisting in the ferromagnetic state matrix for x>0.25, and the least or even no short-range CO state exists in samples for x=0.2-0.25, the above observations can be understood.