Magnetic entropy change in perovskite manganites La0.6Pr0.1Pb0.3MnO3 with double metal-insulator peaks

Following the double metal-insulator peaks found in series of perovskite manganites La_0.7−xPr_xPb_0.3MnO₃ (x=0, 0.05, 0.1), the magnetic entropy change of La_0.6Pr_0.1Pb_0.3MnO₃ was carefully investigated as a representative. The maximum magnetic entropy change (ΔS_H=−1.7 J/kg K at 300 K) and the expanded refrigerant capacity (about 123.8 J/kg) had been obtained under 10 kOe magnetic field variation, though the double peak of maximum magnetic entropy change had not occurred since the comparative faint magnetic signal from the Pr ions inhomogeneity existed in the octahedral frame submerged in the strong magnetic signal originated from the dominating octahedral frame both in the double exchange mechanism, but the width at half maximum in the magnetic entropy change comparatively broadened.     

The magnetic entropy change in La0.8Ce0.2Fe11.4Si1.6Bx compounds prepared by copper-mold casting

The magnetocaloric effect (MCE) of La_0.8Ce_0.2Fe_11.4Si_1.6B_x (x=0.0-0.5) compounds, prepared by a copper-mold casting (CMC) method, has been investigated. Comparing with the conventional arc-melting (CAM) method, the relatively homogenous composition and microstructure were achieved in the precursor alloys prepared by the CMC method. As a result, the annealing time is dramatically shortened from several weeks for CAM alloys to 2 h for CMC alloys, suggesting that CMC method is a time-saving and energy-saving method for fabrication of MCE alloys. On the other hand, it is revealed that B addition gives rise to an enhancement of Curie temperature (T_C), a reduction of thermal lag and magnetic hysteresis and a broadening of working temperature span as well. Although the peak value of magnetic entropy change decreases with B content, various B-contained compounds hold close refrigerant capacities. Comprehensively considering magnetocaloric properties of the B-contained La_0.8Ce_0.2Fe_11.4Si_1.6B_x compounds, it can be concluded that the B-contained compounds prepared by CMC method are promising candidates of magnetocaloric materials in practical application.     

Magnetic and magnetocaloric properties of perovskite manganite Pr0.55Sr0.45MnO3

In this paper, we have studied the magnetic and magnetocaloric properties of the perovskite manganite Pr_0.55Sr_0.45MnO₃. It shows a sharp paramagnetic-ferromagnetic phase transition at 291 K and possesses a moderate magnetic entropy change near room temperature. In addition, a large relative cooling power (143.64 J/kg) and a wide temperature range (84 K) have been found in this material. Compare with the Landau model, we find that the itinerant electrons mainly contribute the larger magnetic entropy change at paramagnetic region.     

Critical behavior in Ga-doped manganites La0.75(Sr,Ca)0.25Mn1−xGaxO3 (0≤x≤0.1)

The critical properties of perovskite manganite AMn_1−xGa_xO₃ (A=La_0.75Ca_0.08Sr_0.17, x=0, 0.05 and 0.1) at the ferromagnetic–paramagnetic transition have been analyzed. Experimental results revealed that all samples exhibit a second-order magnetic phase transition. The estimated critical exponents derived from the magnetic data using various techniques such as modified Arrott plot, Kouvel–Fisher method, and critical magnetization isotherms M(T_C, H). The critical exponent values for the undoped compound were found to match well with those predicted for the three-dimensional Heisenberg model (β=355±0.007, γ=1.326±0.002, δ=4.90±0.01). While on non-magnetic Ga substitution it tends towards mean-field with long-range interaction. The mean-field model might be due to the random dilution of the Mn sublattice by non-magnetic ion Ga³⁺ and/or the development of the physical size of the clusters which enhance the dipole–dipole interaction.     

Magnetocaloric effect in La0.67Sr0.33MnO3 manganite above room temperature

The La_0.67Sr_0.33MnO₃ composition prepared by sol-gel synthesis was studied by dc magnetization measurements. A large magnetocaloric effect was inferred over a wide range of temperature around the second-order paramagnetic-ferromagnetic transition. The change of magnetic entropy increases monotonically with increasing magnetic field and reaches the value of 5.15 J/kg K at 370 K for Δμ0H=5 T. The corresponding adiabatic temperature change is 3.3 K. The changes in magnetic entropy and the adiabatic temperature are also significant at moderate magnetic fields. The magnetic field induced change of the specific heat varies with temperature and has maximum variation near the paramagnetic-ferromagnetic transition. The obtained results show that La_0.67Sr_0.33MnO₃ could be considered as a potential candidate for magnetic refrigeration applications above room temperature.     

Effect of Fe substitution on magnetocaloric effect in La0.7Sr0.3Mn1−xFexO3 (0.05≤x≤0.20)

We have studied the effect of Fe substitution on magnetic and magnetocaloric properties in La_0.7Sr_0.3Mn_1−xFe_xO₃ (x=0.05, 0.07, 0.10, 0.15, and 0.20) over a wide temperature range (T=10-400 K). It is shown that substitution by Fe gradually decreases the ferromagnetic Curie temperature (T_C) and saturation magnetization up to x=0.15 but a dramatic change occurs for x=0.2. The x=0.2 sample can be considered as a phase separated compound in which both short-range ordered ferromagnetic and antiferromagnetic phases coexist. The magnetic entropy change (−ΔS_m) was estimated from isothermal magnetization curves and it decreases with increase of Fe content from 4.4 J kg⁻¹ K⁻¹ at 343 K (x=0.05) to 1.3 J kg⁻¹ K⁻¹ at 105 K (x=0.2), under ΔH=5 T. The La_0.7Sr_0.3Mn_0.93Fe_0.07O₃ sample shows negligible hysteresis loss, operating temperature range over 60 K around room temperature with refrigerant capacity of 225 J kg⁻¹, and magnetic entropy of 4 J kg⁻¹ K⁻¹ which will be an interesting compound for application in room temperature refrigeration.     

The influence of the sintering temperature on the structural and the magnetic properties of doped manganites: La0.95Ag0.05MnO3 and La0.75Ag0.25MnO3

La_1−xAg_xMnO₃ samples were synthesized by standard sol-gel method with Ag concentrations of x=0.05 and 0.25. The samples from each concentration were pressed and sintered at 1000, 1200 and 1400 °C for 24 h in air for a systematic study. They were examined structurally by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD) and magnetically by Magnetic Properties Measurements System (MPMS). AFM and SEM analyses show that surface morphology changes with Ag concentration and sintering temperature (T_S). It was observed that high temperature sintering leads Ag to leave material as determined from EDS analyses. XRD spectra exhibited that the crystal structure changes with Ag concentration while showing pronounced change with the sintering temperature. From the magnetic measurements, the Curie temperatures (T_C) and the isothermal magnetic entropy changes (−ΔSM) were calculated. It was observed that T_C increases with Ag concentration and decreases with T_S. The maximum −ΔSM was calculated to be 7.2 J/kg K under the field change of 5 T for the sample sintered at 1000 °C with x=0.25.     

Magnetocaloric properties in the Cr-doped La0.7Sr0.3MnO3 manganites

Single-phase polycrystalline samples of La_0.7Sr_0.3Mn_1-xCr_xO₃ with nominal composition of x=0.00, 0.20, 0.40 and 0.50 were prepared by a conventional solid-state reaction method in air. Investigations of magnetization were carried out in the temperature range 5-400 K and magnetic field range 0-8 T. It was found that the Curie temperature T_C decreases with increasing x and the maximum magnetic entropy change (−ΔS_M) for x=0.20 is ∼1.203 and ∼2.653 J/kg K, respectively for 2 and 6 T magnetic field near the temperature of 280 K.     

Effect of inhomogeneity on magnetic, magnetocaloric, and magnetotransport properties of La0.6Pr0.1Ca0.3MnO3 single crystal

The effect of magnetic inhomogeneity on magnetic, magnetocaloric, and transport properties of the colossal magnetoresistance manganites with first order ferromagnetic-to-paramagnetic phase transition is studied. The experiments were performed on the single-crystalline samples of La_0.6Pr_0.1Ca_0.3MnO₃. The inhomogeneity is described by the Curie temperature distribution function, which is found from the magnetization data. The temperature dependence of the magnetic field induced change in the entropy is shown to be determined by the distribution function and the shift of the transition temperature in a magnetic field. Similarly, magnetoresistance in the transition region is determined by the resistivity at H=0 and the shift of the transition temperature. The maximum entropy change as well as maximum magnetoresistance can be achieved in the magnetic field of order δT_C/B_M where δT_C is the transition width and B_M is the rate of change of the Curie temperature with magnetic field.Our approach to analysis of the effects of inhomogeneity is general and therefore can be used for all compounds with the first order magnetic phase transition.     

Magnetocaloric and magnetoresistance properties of La2/3Sr1/3Mn1−xCoxO3 compounds

Structural, magnetic, magnetoresistance and magnetocaloric studies on La_2/3Sr_1/3Mn_1−xCo_xO₃ compounds were reported. The samples were prepared by the conventional ceramic method. X-ray analysis showed the presence of one phase only, in all studied samples. From electrical resistance measurements it was found that the samples show large negative magnetoresistance behavior. The magnetic measurements were performed in a large temperature range, 4.2–750 K and external magnetic fields up to 5 T. The adiabatic magnetic entropy changes, |ΔS|, were determined from magnetization data. Large magnetocaloric effect (MCE) has been obtained in all studied samples.     

Mössbauer study of Zn0.4Cu0.6Fe1.2Cr0.8O4

Zn_0.4Cu_0.6Fe_1.2Cr_0.8O₄ has been studied by Mössbauer spectroscopy, SQUID magnetometry, and X-ray diffraction. The crystal is found to have a cubic spinel structure with the lattice constant The iron ions are in ferric states and occupy both the tetrahedral (A) and octahedral (B) sites; the fractions of the iron ions at the A-sites and B-sites are 0.52 and 0.34, respectively. While spin orderings are collinear at higher temperatures, spin canting begins to appear around 25 K and increases with decreasing temperature; the canting angle at 4.7 K reaches up to 27°. Debye temperatures of the tetrahedral and octahedral sites are determined to be 339 and 335 K, respectively.     

Magnetocaloric effect in La0.75Sr0.25MnO3 manganite

The polycrystalline manganite La_0.75Sr_0.25MnO₃ prepared by an alternative carbonate precipitation route reveals the rhombohedral perovskite structure. Magnetization isotherms measured up to 2 T are used to determine Curie temperature of 332 K by means of Arrott plot. Maximum of magnetic entropy change is found at Curie temperature. The relative cooling power equal to 64 J/kg for 1.5 T magnetic field, is superior as compared to the manganite with the same chemical composition from the sol-gel method.     

Influence of Dy addition on the magnetocaloric effect of La0.67Ca0.33Mn0.9V0.1O3 ceramics

The influence of partial substitution of La by Dy on the magnetocaloric response of (La_1−xDy_x)_0.67Ca_0.33Mn_0.9V_0.1O₃, where x=0.03, 0.15 and 0.25 is studied. Rietveld refinement of X-ray diffraction pattern using GSAS method shows that the compounds adopt the orthorhombic structure with Pnma space group. The systematic change in lattice parameters and magnetic phase transition indicates the substitution effect of Dy. From the magnetization isotherms at different temperatures, magnetic entropy change close to their respective transition temperatures (T_C) has been evaluated. The maximum value of entropy change near T_C is found to be about 4.8 J/kg K at 187.5 K for LCMVDy_0.03, 2.45 J/kg K at 107.5 K for LCMVDy_0.15 and 2.15 J/kg K at 92.5 K for LCMVDy_0.25 at 4 T. Dy addition produces a reduction in T_C and in magnitude of the magnetic entropy change. Even though the entropy change decreases with increasing Dy substitution the refrigerant temperature range, ΔT, is found to be 10 K for LCMVDy_0.03, 31 K for LCMVDy_0.15 and 35 K for LCMVDy_0.25 compounds [90%] at 4 T. The field dependence of the magnetic entropy change is also analyzed showing the power law dependence, ΔS_M∞Hⁿ where n=0.75(2) for LCMVDy_0.03, n=0.80(4) for LCMVDy_0.15 and n=0.92(8) for LCMVDy_0.25 compounds at their respective transition temperatures. The relative cooling power and its field dependance are also analyzed.     

Research on charge-ordering state in La0.5Sr0.5MnO2.88 and La0.5Sr0.5Mn0.5Ti0.5O3 systems

The structural, magnetic and transport properties of La_0.5Sr_0.5MnO_2.88 and La_0.5Sr_0.5Mn_0.5Ti_0.5O₃ samples have been investigated systematically. Indeed, this series has been considered to understand the influence of physical parameters such as oxygen deficiency and titanium doping effect in undoped La_0.5Sr_0.5MnO₃ sample. Ceramic material based on La_0.5Sr_0.5MnO_2.88 exhibits interesting behaviours of charge-ordering (CO), ferromagnetic (FM) states and a good conductivity down to the lowest temperatures. The substitution of Ti for Mn destroyed drastically the CO, damaged the motion of itinerant e_g electrons and changed the local parameters of perovskite cell. A change of the structure from tetragonal to rhombohedral symmetry is observed causing a weakening of double-exchange interaction. The experiment results show that the suppression of the CO is sensitive to the variety of Mn³⁺/Mn⁴⁺ ratio. In a field of 8 T at 10 K, FM and CO phase can be evaluated to be ∼20:80 according to the μ_exp/μ_cal ratio for La_0.5Sr_0.5MnO_2.88, whereas the CO state is suppressed for La_0.5Sr_0.5Mn_0.5Ti_0.5O₃ sample, FM and anti-ferromagnetic (AFM) phase are coexisted and evaluated to be ∼54:46, respectively.     

Microstructural characterization of La0.4Sr0.6Co0.8Fe0.2O3-δ films deposited by dip coating

The dip-coating method has been successfully used for depositing porous electrodes of La_0.4Sr_0.6Co_0.8Fe_0.2O_3-δ (LSCF) films. Perovskite oxide cobaltites powders have been prepared by an acetic acid-based gel route. Then, cathode films were deposited onto ceramic substrates of the usual electrolyte Cerium Gadolinium Oxide (CGO) by dip coating. The structure and morphology of the powders and films were characterized by X-ray, diffraction (XRD) and scanning electron microscopy (SEM) respectively, to study the correlation between microstructure and deposition parameters. Optimum parameters for obtaining continuous, homogeneous and crack free LSCF films were determined.     

Magnetic pair making and breaking effect of Ru in La0.7Sr0.3Mn0.9Ru0.1O3 and La0.5Sr0.5Co0.9Ru0.1O3

The substitutional effect of Ru on the magnetic and transport properties of double exchange ferromagnets, La_0.7Sr_0.3MnO₃ and La_0.5Sr_0.5CoO₃ has been investigated. It is found that substitution of 10% Ru at the Mn site of La_0.7Sr_0.3MnO₃ decreases the Curie temperature by 20 K than that of the parent compound. However, a large decrease in the Curie temperature, ΔT_c80 K and the system undergoes a transition from metallic state to insulating state is observed when 10% Ru is doped in La_0.5Sr_0.5CoO₃. The marginal effect of Ru in the Mn–O–Mn sublattice in comparison to the Co–O–Co sublattice could be due to the magnetic exchange interaction between Mn and Ru by virtue of the fact that Ru exhibits variable valence states, Ru⁺⁴/Ru⁺⁵. The e_g and t_2g parentage of Ru⁺⁵ is similar to Mn⁺⁴ and therefore, Ru⁺⁵ ion appears to participate in the double exchange mediated ferromagnetic (FM) interaction. On the other hand, Ruthenium (IV) ion disrupts an intermediate spin state of cobalt (Co⁺³: t_2g⁵e_g¹), forcing a double exchange FM state to anti-FM state.     

Magnetocaloric effect at room temperature in manganese perovskite La0.65Nd0.05Pb0.3MnO3 with double resistivity peaks

Series of polycrystalline manganese perovskite oxides La_0.7−xNd_xPb_0.3MnO₃ (x=0, 0.05, and 0.1) are prepared by the sol-gel technique, La_0.65Nd_0.05Pb_0.3MnO₃ were representatively investigated because the peculiar double resistivity peaks were found; the maximum magnetic entropy change ΔS_H=−2.03 J/kg K and its good refrigerant capacity 71.05 J/kg around room temperature were obtained under 9 kOe magnetic field variation. The expected double peaks of magnetocaloric effect had not occurred since magnetic entropy change originated from the differential coefficient of magnetic moment to temperature; the relatively well refrigerant capacity possibly results from the faint magnetic inhomogeneity mixed in the double exchange strong magnetic signal.     

Structural,magnetic, magnetocaloric and impedance spectroscopy analysis of Pr0.8Sr0.2MnO3 manganite prepared by modified solid-state route

Orthorhombic Pr_0.8Sr_0.2MnO₃ sample is prepared by solid-state reaction method and quenched in water. The occurrence of a second-order phase transition is confirmed by Arrott plots. The critical exponents determined using different models are in good agreement with the 3D-Ising model. The magnetocaloric results have shown an important maximum of the magnetic entropy change and relative cooling power evaluated at 2.14 J?kg^?1?K^?1 and 101.52 J?kg^?1 under a field change of 2T. The DC conductance measurements revealed that this compound exhibited a semiconductor to metallic behavior at $T_{\mathit{SM}}=400$ K. Moreover, the AC results are described by the Jonscher power law. Concerning the electrical and dielectric properties, they disclosed the behavior-dependency of both temperature and frequency. As for the complex impedance measurements, they showed that the conduction mechanism was governed by grain boundaries. The dielectric results demonstrated important values of the real part of the permittivity, and the Pr_0.8Sr_0.2MnO₃ material can be used for capacitor manufacturing.     

Magnetic entropy change in GdCo13−xSix intermetallic compounds

The magnetic entropy change in GdCo_13−xSi_x (x=3.8, 4, 4.1, and 4.2) intermetallic compounds has been investigated by means of magnetic measurements in the vicinity of their Curie temperature. It was found that the magnetic ordering temperatures decrease from 60 K at x=3.8 to 28 K for x=4.2. The magnetic entropy change is calculated from isothermal magnetization versus magnetic field at various temperatures using the Maxwell relation. As a result, the maximum magnetic entropy changes of the investigated compounds, at their Curie temperatures, decrease from 11.5 J/kg K for x=4.2 to 6.86 J/kg K for x=3.8 in a field change of 0-3 T, whereas it decreases from 5.13 J/kg K for x=4.2 to 2.60 J/kg K for x=3.8 in a field change of 0-1 T. Moreover, the maximum value of the magnetic entropy change obtained at a higher field for GdCo_13−xSi_x with x=4 (23.75 J/kg K at 5 T) is comparable to that of various types of compounds with a cubic NaZn₁₃-type structure. Finally, the maximum of the magnetic entropy change is found to decrease with increasing Si content.     

Magnetocaloric effect in (La0.47Gd0.2)Sr0.33MnO3 polycrystalline nanoparticles

In this paper, nanosized particles of (La_0.47Gd_0.2)Sr_0.33MnO₃ perovskite-type oxides were successfully synthesized at a relatively low calcinated temperature at 800 °C for 10 h using amorphous molecular alloy as precursor. X-ray diffraction (XRD) and electron diffraction (ED) revealed that the resulting product is of pure single-phase rhombohedral structure. The Curie temperature T_C and magnetic entropy change (MCE) in (La_0.47Gd_0.2)Sr_0.33MnO₃ polycrystalline nanoparticles are determined and compared to those of similar systems prepared by the conventional solid-state reaction method. The Curie temperature T_C is shifted to 298 k, and a relatively large MCE with a broad peak around Curie temperature is observed in (La_0.47Gd_0.2)Sr_0.33MnO₃ polycrystalline particles. These results suggested that this material is a suitable candidate as working substance in magnetic refrigeration near room temperature.