APPLICATION OF 2D-NMR TECHNIQUES IN THE STRUCTURE DETERMINATION OF HYPODEMATINE

An alkaloid with a novel structure,named Hypodematine,was isolatedfrom Hypodematium sinense Iwatsuki(belonging to Thelypterdaceae).Itsstructure was elucidated by means of the ~1H-~1H COSY' ~1H-~(13)C COSY and long-range~1H-~(13)C COSY spectroscopy to have the skeleton of benzo-aza-cyclooctatetraenewith a phenyl substituent.Such basic structure has not been found in the na-tural product before.     

Metallorganische verbindungen der lanthanoide CVIII. Synthese und strukturaufklärung monomerer organolanthanoidacetate

LnCl₃ reacts with Na(C₅Me₄¹Bu) in THF to form the organolanthanoid chlorides [(C₅Me₄¹Bu)₂LnCl(THF)] (Ln = La (1a), Lu (1b)). Compounds 1a and 1b yield in reaction with NaO₂CCH₃ the monomeric organolanthanoid acetates [(C₅Me₄¹Bu)₂LnO₂CCH₃] (Ln = La (2a), Lu (2b)). The single crystal X-ray structure analysis of 2b as well as the cryoscopic molecular weight investigation of 2a verify the monomeric structure of these complexes.     

Calculation of CO(XΣ) + 0(P) recombination chemiluminescence spectrum

Relative emission spectra for the bent to linear, CO₂(¹B₂)---CO₂(X¹Σ⁺_g) transitions have been calculated using the model: harmonic oscillator, symmetric-top wavefunctions and energy levels for CO₂(¹B₂); first-orer Fermi resonance vibrational wavefunctions and energy levels for CO₂(X¹Σ⁺_g); a Boltzmann distribution of vibrational and rotational states in CO₂(¹B₂); and a constant electronic transition moment. With the literature CO₂(¹B₂) molecular structure, spectra calculated using this model show characteristics similar to the low-temperature chemiluminescence from the combination of atomic oxygen and carbon monoxide. The calculated spectra account for experimental band positions to wavelengths of 570 nm and the weak dependence of the spectra on temperature over the range 206–353 K. The latter result was obtained from a CO₂(¹B₂) bending fundamental of 600 cm⁻¹. The calculated spectra also show a violet-shift in intensity and an attenuated band structure at higher temperatures. The magnitude of these effects depends on the CO₂(¹B₂) force constants and not on the CO₂(¹B₂) molecular structure.     

Syntheses and Structures of (Ga1-xBx)PO4, with a New Modification of High Cristobalite,and (B1-xZnx)PO4, with Low Cristobalite Type

The transition metal element substitutions of the industrial catalytic material ortho-borophosphate, BPO₄, can lead to either new type of structure for Cr^[1] or stabilize low cristobalite structure for Mn, Fe,Co, Ni and Cu^[2] Here we report our results on the substitution by main group elements Zn and Ga. The two title compounds were synthesized by high temperature solid state reactions and the structure were refined by powder diffraction methods.The structure parameters:(B_0.25Ga_0.75)PO₄:Tetragonal, P-4, a=4.727(1), c=7.078(1) Å,V=158.17(1) ų, Z=2, R(P)=0.0965, R(I)=0.0426; (B_0.61Zn_0.39)PO₄:Orthorhombic, C222₁ a=7.080(1), b=7.087(1),c=6.990(1) Å, V=350.71(2) ų, Z=4,R(P)=0.0904,R(I)=0.0438. Pure GaPO₄ were found three kinds of structures, low- and high-cristobalite and high -quartz with an observation of an unknown unstable high cristobalite at high temperature^[3] The boron substitution of the high-cristobalite GaPO₄ with space group I-A leads to lower symmetry space group(P-4). We assume the low symmetry structure related to the unknown unstable phase. The structures of both compounds are similar to very well known cristobalite (see figure below).     

Hydrothermal Syntheses,Crystal Structures and Thermal Properties of Two New Organically Templated Open-framework Gallium Phosphites

Two new open-framework gallium phosphites formulated as (C₂N₂H₁₀)_0.5Ga₂(OH)(H₂O)(HPO₃)₃(1) and (C₃N₂H₅)₂(C₃N₂H₆)Ga₈(H₂O)₆(HPO₃)₁₄(2) were hydrothermally synthesized in the presence of ethylenediamine(en) and imidazole as structure directing agents(SDA), respectively. Structural analyses reveal that the 3D structures of compounds 1 and 2 are both built up from the linkage of GaO₆, GaO₅(H₂O) and HPO₃^2? units by sharing vertices. The structure of compound 2 is constructed from well-known 4.6.12-net connecting layers in the AAAA stacking sequence, which are penetrated by the 1D Ga-O-P chains to form a 3D pillared-layered structure.     

氧气对胜利褐煤水蒸气气化半焦结构及反应性的影响

为了研究氧气对半焦的结构变化和反应性的影响,采用不锈钢模拟气流床反应器,在8种不同气氛,800和900 ℃条件下,进行了胜利褐煤水蒸气气化实验。利用拉曼光谱和热重分析仪分别表征了半焦的结构和本征反应性。结果表明,在800和900 ℃条件下,添加的氧气对半焦结构变化的影响方式不同;半焦结构的变化是影响碱金属和碱土金属(AAEM)挥发的主要因素。在不同温度下,添加的氧气对Na挥发的影响和对结构的作用类似,H₂O/O₂混合气氛促使气化所得半焦的反应性进一步降低。半焦的反应活性指数与拉曼光谱谱带比值 I (G_R+V_L+V_R)/I_D具有很好的相关性。     

On the vibronic structure of all-trans-retinal in different environments

The great sensitivity of the electronic structure of a polyene in different environments is visualized through the all-trans-retinal molecule in solvents with different polarity. A vibronic structure in the ¹B_u⁺ ← ¹A_g⁻ transition of all-trans-retinal is detected in the second-derivative spectrum of the ordinary band-shape function. It consists mainly of a 1480 cm⁻¹ progression. Attempts to simulate this are presented. A correlation between the resolution in the vibronic structure and the polarity of the environment of retinal is found. A second excited state of all-trans-retinal may be responsible for the changes in the vibronic structure in the different solvents.     

盐酸介导策略合成的具有优异光催化能力的ZnFe2O4小颗粒点缀一维苝二酰亚胺S型异质结

由于有机材料的结构多样性,越来越多的研究者选择有机材料作为光催化剂.典型的n型有机半导体花二酰亚胺(PDI)不仅在可见光照射下有较强的光响应能力,而且有合适的带隙和负导带,使得光激发电子具有较强的还原能力.半导体光催化剂的适用性受到光生载流子复合的限制,而构建S型异质结可有效保证电荷分离,也可保证空穴和电子的强氧化能力...     

CoAl2O4包覆LiNi1/3Co1/3Mn1/3O2的电化学性能

通过共沉淀法制得类球形锂离子电池正极材料LiNi_1/3Co_1/3Mn_1/3O₂,并用非水相共沉法对其进行CoAl₂O₄包覆得到LNCMO(x). 采用X射线衍射（XRD）、扫描电子显微术（SEM）和透射电子显微术（TEM）测试材料的结构和观察材料形貌. 结果表明,CoAl₂O₄在材料表面形成8 nm均匀包覆层,未改变主体材料的结构. 电化学性能测试表明,1%（by mass）CoAl₂O₄包覆量的LiNi1/3Co1/3Mn1/3O2材料（LNCMO(1)）高充电电压（3.0 ~ 4.6 V,150 mA·g^-1）100周期循环放电容量保持率为93.7%（无包覆LNCMO(0)保持率为74.4%）;55 °C高温100周期循环容量保持率为77%（无包覆LNCMO(0)保持率17%）. XRD和电感耦合等离子体原子发射光谱（ICP-AES）测试表明,CoAl₂O₄包覆的LNCMO(x)材料可有效地减缓材料中Mn离子在电解液的溶解,提高材料结构稳定性和热稳定性.     

硝酸铕18-C-6(4:3)络合物的晶体结构

标题化合物的分子式为[Eu(NO₃)₆][Eu(NO₃)₂C₁₂H₂₄O₆]₃。晶体属单斜晶系,空间群为C2/m,a=28.772(6),b=11.142(2),c=12.024(2)Å,β=112.63(2)°,Z=2。对1167个可观察反射(I≥3σ(I)),用块矩阵最小二乘法精修所有的结构参数,最后的一致性因子R=0.063。结构分析表明:晶体学上有三个不同的离子,(1)[Eu(NO₃)₆]^3-,(2)[Eu(NO₃)₂C₁₂H₂₄O₆]⁺(有序)和(3)[Eu(NO₃)₂C₁₂H₂₄O₆]⁺(无序)。前两个离子都具有C_2h对称性。第三个离子是C₁对称性,它有一个无序的冠醚环。在Fourier图上二个冠醚环叠加,它们的相互交错角为32°。     

负载Cr_2O_3的H_2Ti_2O_5·H_2O纳米管的制备及其作为锂离子电池正极材料的电化学性能

限制纳米电极材料倍率性能的一个重要因素是,在大电流下充放电时,纳米结构可能坍塌,造成容量迅速衰减.通过异价离子的掺杂或第二相的负载有可能弥补纳米材料的这一缺陷.本文以含有Cr2O3的锐钛矿TiO2为原料,通过超声化学-水热法,制备了负载Cr2O3的H2Ti2O5·H2O纳米管.采用X射线衍射(XRD)和透射电镜(TEM)对制得的H2Ti2O5·H2O/Cr2O3纳米管的晶体结构和微观形貌进行了表征和分析.恒流充放电测试显示,H2Ti2O5·H2O/Cr2O3(5%(w,质量分数))纳米管作为锂离子电池阳极材料具有优异的循环稳定性及倍率性能.在150mA·g-1的电流密度下,H2Ti2O5·H2O/Cr2O3纳米管的首次放电容量达到288mAh·g-1;120次循环后,充放电容量仍保持在145mAh·g-1.在1500mA·g-1的电流密度下,首次放电容量为178mAh·g-1;600次循环后,充放电容量保持在80mAh·g-1以上;继续在150mA·g-1电流密度下充放电30个循环,充放电容量达到155mAh·g-1,显示出充放电容量的可回复性.循环伏安测试结果表明,H2Ti2O5·H2O/Cr2O3纳米管的充放电过程由法拉第赝电容反应控制.该一维纳米结构在锂离子电池和非对称电容器领域显示出良好的应用前景.     

Neodymium Complex Obtained from Reductive-coupling of Carbodiimide: Synthesis and Structure of [(Cp")2Nd(NR)2C-C(NR)2Nd(Cp")2]

A bimetallic oxalamidino complex of neodymium [(Cp")₂Nd(NR)₂C-C(NR')₂Nd(Cp")₂][Cp"=η⁵-C₅H₃-1,3-(SiMe₃)₂, R=C₆H₁₁](2) was obtained via reaction between NdI₂ and carbodiimide[RN=C=NR] (R=C₆H₁₁)(molar ratio 1:1) in tetrahydrofuran(THF) solution, followed by the addition of [KCp"(THF)](1)(molar ratio 1:2) at a low temperature through a reductive-coupling reaction with carbodiimide. The structure of the intermediate product was confirmed by means of elemental analysis, ¹H NMR and ¹³C NMR. Characterization of the product by single crystal X-ray diffraction confirmed the diamidinate type of structure.     

Polymeric Carbon Nitride-based Single Atom Photocatalysts for CO2 Reduction to C1 Products

Photocatalytic CO₂ reduction to C₁ fuels is considered to be an important way for alleviating increasingly serious energy crisis and environmental pollution. Due to the environment-friendly, simple preparation, easy formation of highly-stable metal-nitrogen(M-N_x) coordination bonds, and suitable band structure, polymeric carbon nitride-based single-atom catalysts(C₃N₄-based SACs) are expected to become a potential for CO₂ reduction under visible-light irradiation. In this review, we summarize the recent advancement on C₃N₄-based SACs for photocatalytic CO₂ reduction to C₁ products, including the reaction mechanism for photocatalytic CO₂ reduction to C₁ products, the structure and synthesis methods of C₃N₄-based SACs and their applications toward photocatalytic CO₂ reduction reaction(CO₂RR) for C₁ production. The current challenges and future opportunities of C₃N₄-based SACs for photoreduction of CO₂ are also discussed.     

Enhanced electrochemical performance and mechanism study of AgLi1/3Sn2/3O2 for lithium storage

AgLi_1/3Sn_2/3O₂ with delafossite structure is prepared by treating Li₂SnO₃ with molten AgNO₃ and it exhibits improved electrochemical performance compared to Li₂SnO₃.     

KTbP4O12晶体的生长及其荧光特性

本文采用蒸发溶液法从磷酸溶液中生长了KTbP₄O₁₂和一系列KLa_1-xTbxP₄O₁₂晶体。讨论了晶体生长中的物理化学问题。测定了晶体的X射线衍射图和红外光谱,发现KTbP₄O₁₂晶体存在着α和β两种不同的结构类型。计算了不同结构类型晶体的晶胞参数。 测定了晶体的荧光光谱,观察到在KLa_1-xTb_xP₄O₁₂晶体中随着La³⁺离子浓度的变化而有规律的变化。观察到KTbP₄O₁₂能发出强的绿色荧光,将可能作为一种新的晶体发光或激光材料。     

A molecular dynamics study on the conformational stability of PrP 180–193 helix II prion fragment

Molecular dynamics of PrP 180–193 has allowed us to investigate the stability of the -helical conformation of the zwitterionic peptide (L₁) and the neutralized (L₂). In water, the helical structure of L₁ is unstable; in L₂, the -helix breaks up in the middle at Gln186, and the two resulting connected helices are stable. The hydrophobic enviroment decreases the stability of the helical structure of L₁, this effect is more evident for L₂ for which the unfolding of the C-terminus is followed by the formation of an intramolecular hydrogen bond connecting His¹⁸⁷ with Thr¹⁹¹.     

二氧化钼-碳复合涂层的电化学性能研究

应用简单的刮涂法以及真空煅烧可制备出承载在铜箔表面的二氧化钼-碳（MoO₂-C）复合涂层,并对样品的形貌、成分、结构和电化学性能进行分析.结果表明,该复合涂层由单斜结构的MoO₂纳米粒子和无定形碳组成.一些MoO₂纳米粒子承载在碳基体表面,其尺寸为5~30nm;一些MoO₂纳米粒子包覆在碳基体内部,其尺寸约为5nm. MoO₂-C复合涂层为多孔结构,其孔隙尺寸为1~3nm.该复合涂层与铜箔结合紧密,界面处没有裂纹.承载在铜箔表面的MoO₂-C复合涂层的比容量高、循环和倍率性能良好.在100mA·g^-1电流密度下,该负极经过100次循环后的比容量为814mAh·g^-1,在循环过程中没有出现明显的容量衰减,即使在5000mA·g^-1的高电流密度下,其比容量仍有188mAh·g^-1.     

三元正极材料前驱体Ni1/3Co1/3Mn1/3(OH)2的连续合成与条件探究

以硫酸锰、硫酸镍、硫酸钴为原材料、NaOH和氨水分别为沉淀剂和络合剂,采用共沉淀法制备三元正极材料前驱体Ni_1/3Co_1/3Mn_1/3(OH)₂. 探究了搅拌速度对造核颗粒形貌和晶核流量、氨水流量、浆料返流、搅拌桨对晶体结构、前驱体形貌、粒度及其粒度分布的影响. 物理表征结果表明,搅拌速度300 r•min^-1时,生成的晶核聚集成球形或类球形,分散性好,颗粒粒径4~5 μm;在造核金属液流量0.4L•h^-1,生长金属液流量1.72 L•h^-1,搅拌桨为推进式时,产物为单一相的β-Ni(OH)₂层状结构,粒度D₅₀为6~7 μm,振实密度≥2.0 g•cm^-3,比表面积6~10 m²•g^-1;电化学测试结果表明,在3.0~4.25 V电压范围内,0.2 C时,其首次放电容量为149.7 mAh•g^-1,循环100次后,容量保持率为94.09 %;产物满足高端三元正极材料厂家需求. 多釜串联工艺简单有效,具有可行性,有望用于三元正极材料前驱体的规模生产.     

Homochiral cobalt(II) and strontium(II) amino-carboxylate–phosphonate hybrids

Two homochiral metal amino-carboxylate–phosphonate hybrids, namely, [Co₂Cl(S-HL)(H₂O)₅]Cl · H₂O 1 and Sr₂(S-HL)(NO₃)₂(H₂O) · H₂O 2 (S-H₃L = S-HO₂CC₄H₇NCH₂PO₃H₂) have been synthesized by the reaction of the enantiopure S-H₃L ligand with cobalt(II) chloride or strontium nitrate under acidic condition at room temperature. The structure of compound 1 features a novel 3D framework with helical chains and channels. Compound 2 has a layered structure in which the 1D chains of edge-sharing SrO₈ and SrO₉ polyhedra are interconnected by phosphonate ligands.     

N-苄基-N-(2-氰乙基)-二茂铁磺酰胺的晶体和分子结构

N-等基-N-(2-氰乙基)-二茂铁磺酰胺[C₅H₅FeC₅H₄SO₂N(C₂H₄CN)CH₂C₆H₅]为黄色柱状晶体,属单斜晶系,空间群P2₁/n,晶胞参数为:α=8.750(1),b=12.876(5),c=16.744(2)Å,β=94.75(1)°,V=1880.0ų,Z=4,计算密度D_calc=1.442g/cm³。在CAD-4四园衍射仪上,用MoK_α射线收集衍射数据,用Patterson函数法和差值Fourior合成求解晶体结构。经以2226个独立衍射点用全矩阵最小二乘修正,最后使偏离因子R=0.0466.分子中S原子、N原子以不等性sp³杂化与周围原子健合。