Transformation of rhodium carbonyl complexes in hydroformylation of 1-hexene studied fromin situ IR spectroscopic data

Rhodium carbonyl complexes that formed from RhCl₃·4H₂O and RhCl₃·4H₂O modified by poly-N,N-dimethyl-N,N-diallylammonium chloride in a methanol—chloroform medium in the hydroformylation of 1-hexene were studied byin situ IR spectroscopy. Along with the rhodium hydrocarbonyl complexes, anionic complexes of the [Rh(CO)₂Cl₂]⁻ type, whose concentrations and rates of formation in an acidic medium are much higher than those in a basic medium, were shown to be the active centers of hydroformylation. The function of the polycation is the stabilization of the catalytically active mononuclear rhodium complexes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 708–710, April, 1999.     

Chloride‐Bridged Dinuclear Rhodium(III) Complexes Bearing Chiral Diphosphine Ligands: Catalyst Precursors for Asymmetric Hydrogenation of Simple Olefins

Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride‐bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]₂, chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)‐prop‐1‐ene‐1,2‐diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.     

Monohydride-Dichloro Rhodium(III) Complexes with Chiral Diphosphine Ligands as Catalysts for Asymmetric Hydrogenation of Olefinic Substrates

We report full details of the synthesis and characterization of monohydride-dichloro rhodium(III) complexes bearing chiral diphosphine ligands, such as (S)-BINAP, (S)-DM-SEGPHOS, and (S)-DTBM-SEGPHOS, producing cationic triply chloride bridged dinuclear rhodium(III) complexes ( 1 a : (S)-BINAP; 1 b : (S)-DM-SEGPHOS) and a neutral mononuclear monohydride-dichloro rhodium(III) complex ( 1 c : (S)-DTBM-SEGPHOS) in high yield and high purity. Their solid state structure and solution behavior were determined by crystallographic studies as well as full spectral data, including DOSY NMR spectroscopy. Among these three complexes, 1 c has a rigid pocket surrounded by two chloride atoms bound to the rhodium atom together with one tBu group of (S)-DTBM-SEGPHOS for fitting to simple olefins without any coordinating functional groups. Complex 1 c exhibited superior catalytic activity and enantioselectivity for asymmetric hydrogenation of exo-olefins and olefinic substrates. The catalytic activity of 1 c was compared with that of well-demonstrated dihydride species derived in situ from rhodium(I) precursors such as [Rh(cod)Cl]₂ and [Rh(cod)₂]⁺[BF₄]⁻ upon mixing with (S)-DTBM-SEGPHOS under dihydrogen.     

Catalytic polymerization of phenylacetylene with dimeric [Rh(OMe)(cod)]2 complex in ionic liquids

Dimeric rhodium(I) complex [Rh(OMe)(cod)]₂ was found to be an active catalyst of phenylacetylene polymerization to poly(phenylacetylene) (PPA) in ionic liquids containing imidazolium or pyridinium cations. The highest yield of PPA (92%) was obtained in 1‐butyl‐4‐methylpyridinium tetrafluoroborate as reaction medium. The yield of PPA in imidazolium ionic liquids containing BF₄^? or PF₆^? anions increased to 83–99% when Et₃N or cycloocta‐1,5‐diene were added as co‐catalysts. In 1‐methyl‐3‐octylimidazolium chloride (MOI · Cl) polymerization rate was much lower than in other ionic liquids, although the highest M_w (72 400) was obtained. Spectroscopic studies confirmed that [Rh(OMe)(cod)]₂ reacted with MOI · Cl forming new carbene Rh(I) complex, which can participate in the polymerization process. Copyright © 2006 John Wiley & Sons, Ltd.     

Reaction of rhodium trichloride and dirhodium(II) acetate with <Emphasis Type="Italic">trans</Emphasis>-4,4′-bis(diethoxyphosphoryl)biphenyl-18-crown-6

The complexation of RhCl₃·3H₂O and [RH₂(CH₃COO)₄·2H₂O] with trans-4,4′-bis (diethoxyphosphoryl)biphenyl-18-crown-6 in various media was studied. In the synthesized compounds the rhodium(III) or dirodium(II) ions form supramolecular ensembles with ligand environment. The compounds were characterized by NMR, IR, Raman, ESR, X-ray electron spectroscopy, conductivity, and the data of elemental and X-ray fluorescence analyses. The predominant role of diethoxyphosphoryl groups at the macrocycle in binding rhodium(III) and dirhodium(II) ions was demonstrated.     

Crystal and Species Engineering with Semi‐Flexible Nitrogen Containing Organic Cations: Generation of [H13O6]+ Ions with the Unfavoured Unbranched Topology by Enclosing Hydrochloric Acid in a Porous Inorganic‐Organic Hybrid Material

The reaction of rhodium(III) chloride trihydrate with 1, 4‐diazacycloheptane in concentrated hydrochloric acid results in the formation of tris(1, 4‐diazoniacycloheptane) hexaaquahydrogen(1+) bis(hexachlororhodate(III)) chloride, [C₅H₁₄N₂]₃[H₁₃O₆][RhCl₆]₂Cl ( 1 ). Dark red crystals of 1 are obtained by diffusion‐controlled crystallization at room temperature. Slow evaporation of the mother liquor over a period of several days yields a few tiny crystals of the bis(1, 4‐diazoniacycloheptane) hexachlororhodate(III) chloride hydrate, [C₅H₁₄N₂]₂[RhCl₆]Cl ˙ 1.75 H₂O ( 2 ), as red thin squared plates. In the context of crystal engineering, compounds 1 and 2 are inorganic‐organic hybrid materials built up from octahedral [RhCl₆]^3‐, simple Cl^‐ and semi‐flexible heterocyclic 1, 4‐diazoniacycloheptane ions, incorporating either the [H₁₃O₆]⁺ and further Cl^‐ ions or portions of simple water molecules. Both compounds crystallize in the space group type P2₁/c. Compound 1 contains isolated [H₁₃O₆]⁺ ions with a linear chain‐like configuration enclosed in the cavities of the inorganic‐organic framework. The presence of a strong central O···H···O hydrogen bond within the [H₁₃O₆]⁺ ions in 1 is confirmed by the short O···O separation of 2.47Å and by characteristic IR absorption bands at 1626 (s), ～ 1250 (m) and 668 (m) cm^‐1. During the thermal decomposition, compound 1 looses at first five equivalents of water and one equivalent of hydrochloric acid in a two‐step process at 37 °C and 67 °C. This is followed by the decomposition of the 1, 4‐diazoniacycloheptane cations and the hexachlororhodate(III) anions, starting at 190 °C and proceeding intensified at 240 °C.     

Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Two precatalysts for application in propargylic CH activation

The complexes {bis[(2‐diphenylphosphanyl)phenyl] ether‐κ²P,P′}(η⁴‐norbornadiene)rhodium(I) tetrafluoridoborate, [Rh(C₇H₈)(C₃₆H₂₈OP₂)]BF₄, and {bis[(2‐diphenylphosphanyl)phenyl] ether‐κ²P,P′}[η⁴‐(Z,Z)‐cycloocta‐1,5‐diene]rhodium(I) tetrafluoridoborate dichloromethane monosolvate, [Rh(C₈H₁₂)(C₃₆H₂₈OP₂)]BF₄·CH₂Cl₂, are applied as precatalysts in redox‐neutral atomic‐economic propargylic CH activation [Lumbroso et al. (2013). Angew. Chem. Int. Ed. 52 , 1890–1932]. In addition, the catalytically inactive pentacoordinated 18‐electron complex {bis[(2‐diphenylphosphanyl)phenyl] ether‐κ²P,P′}chlorido(η⁴‐norbornadiene)rhodium(I), [RhCl(C₇H₈)(C₃₆H₂₈OP₂)], was synthesized, which can form in the presence of chloride in the reaction system.     

C–H-Aktivierung: Synthese und Eigenschaften von Acetonato(C)acidophthalocyaninato(2–)metallaten(III) von Rhodium und Iridium; Kristallstruktur von Tetra(n-butyl)ammoniumacetonato(C)-azidophthalocyaninato(2–)iridat(III)

C–H-Activation: Syntheses and Properties of Acetonato( C )-acidophthalocyaninato(2–)metallates(III) of Rhodium and Iridium; Crystal Structure of Tetra(n-butyl)ammonium Acetonato( C )azidophthalocyaninato(2–)iridate(III) Phthalocyaninato(2–)metallate(I) of rhodium and iridium reacts with carbonyl substrates like acetone or acetylacetone and halides or pseudohalides forming acetonato(C)- or acetylacetonato(C)acidophthalocyaninato(2–)metallates(III), that are isolated as tetra(n-butyl)ammonium complex salts (ⁿBu₄N)[M(R)(X)pc^2–] (M = Rh, Ir; R = aC, acaC; X = Cl, I, N₃, SCN/NCS). (ⁿBu₄N)[Ir(aC)(N₃)pc^2–] · 0,25(C₂H₅)₂O · 0,5 CH₂Cl₂ crystallizes in the triclinic space group P1 with cell parameters a = 16.267(8) Å, b = 17.938(3) Å, c = 18.335(4) Å, α = 74.77(2)°, β = 73.73(3)°, γ = 84.25(3)°, V = 4954(3) ų, Z = 4. There are two crystallographically independent anions, differing by the orientation of the azido ligand either towards an isoindole group or a N_aza bridge of the phthalocyaninate, while the σ-C bonded acetonate is always oriented towards an isoindole group (gauche and ecliptical configuration). The Ir–C distances are 2.12(1) and 2.14(1) Å. Due to the trans influence of the acetonate-C atom the Ir-azide-N distances of 2.22(1)/2.24(1) Å are longer than expected. The electrochemical properties and the optical, vibrational, and ¹H-NMR spectra are discussed.     

Hydroformylation of 1-Hexene Catalyzed by [Rh(COD)(2-Picoline)2]PF6 Immobilized on Poly(4-Vinylpyridine) Under Water Gas Shift Reaction Conditions

Reported here is the influence of the reaction conditions variation (1-hexene/rhodium content (S/C) = 16 - 105, temperature (T) = 70 - 110 °C and carbon monoxide pressure (P(CO)) = 0.6 - 1.8 atm) on the catalytic hydroformylation of 1-hexene to aldehydes (heptanal and 2-methyl-hexanal) by the rhodium(I) complex, [Rh(COD)(2-picoline)₂]PF₆ (COD = 1,5-cyclooctadiene)immobilized on poly(4-vinylpyridine) in contact with 10 mL of 80% aqueous 2-ethoxyethanol, under water gas shift reaction condition. This revised version was published online in June 2006 with corrections to the Cover Date.     

A dinuclear phosphite rhodium(I) complex obtained by syngas treatment of a Rh/hydroxy phosphonite olefin hydroformylation precatalyst

A hydroxy phosphonite was found to be unstable during the catalyst preformation routine applied towards a rhodium olefin hydroformylation catalyst. C—P bond cleavage occurred when the phosphonite was reacted with [(acac)Rh(1,5‐COD)] (acac is acetyl acetate and 1,5‐COD is cycloocta‐1,5‐diene) at 80 °C and 20 bar of CO/H₂. As a result, a nearly planar six‐membered ring structure consisting of two rhodium(I) cations and two bridging phosphorous acid diester anions was formed, namely bis[μ‐(4,8‐di‐tert‐butyl‐2,10‐dimethoxydibenzo[d,f][1,3,2]dioxaphosphepin‐6‐yl)oxy]‐1:2κ²P:O;1:2κ²O:P‐bis{[6‐([1,1′‐biphenyl]‐2‐yloxy)‐4,8‐di‐tert‐butyl‐2,10‐dimethoxydibenzo[d,f][1,3,2]dioxaphosphepine‐κP]carbonylrhodium(I)} toluene tetrasolvate, [Rh₂(C₂₂H₂₈O₅P)₂(C₃₄H₃₇O₅P)₂(CO)₂]·4C₇H₈. Further coordination of phosphite and of carbonyl groups resulted in 16‐electron rhodium centres.     

An H-Substituted Rhodium Silylene

Divergent reactivity of organometallic rhodium(I) complexes, which led to the isolation of neutral rhodium silylenes, is described. Addition of PhRSiH₂ (R=H, Ph) to the rhodium cyclooctene complex (^iPrNNN)Rh(COE) (1-COE; ^iPrNNN=2,5-[iPr₂P=N(4-iPrC₆H₄)]₂N(C₆H₂)⁻, COE=cyclooctene) resulted in the oxidative addition of an Si−H bond, providing rhodium(III) silyl hydride complexes (^iPrNNN)Rh(H)SiHRPh (R=H, 2 -SiH₂Ph; Ph, 2 -SiHPh₂). When the carbonyl complex (^iPrNNN)Rh(CO) ( 1 -CO) was treated with hydrosilanes, base-stabilized rhodium(I) silylenes κ²-N,N-(^iPrNNN)(CO)Rh=SiRPh (R=H, 3 -SiHPh; Ph, 3 -SiPh₂) were isolated and characterized using multinuclear NMR spectroscopy and X-ray crystallography. Both silylene species feature short Rh−Si bonds [2.262(1) Å, 3 -SiHPh; 2.2702(7) Å, 3 -SiPh₂] that agree well with the DFT-computed structures. The overall reaction led to a change in the ^iPrNNN ligand bonding mode (κ³→κ²) and loss of H₂ from PhSiRH₂, as corroborated by deuterium labelling experiments.     

Separation of rhodium from ruthenium and iridium by fast solvent extraction with HDEHP

Solvent extraction of rhodium, ruthenium and iridium with di(2-ethylhexyl)phosphoric acid (HDEHP) has been investigated. Under the conditions [Cl^–1]=0.20M, [(HDEHP)₂]=0.30M, pH 4.05, phase contact time 1 minutes, Rh(III) is extracted 90.7%, Ru(III) and Ir(III) 20.0% and 11.5%, respectively, at phase ratio 11. The distribution ratio of rhodium is proportional to [(HDEHP)₂]³ for a freshly prepared aqueous phase with low chloride concentration but might drop to [(HDEHP)₂]^1to2 for an aqueous phase high in chloride concentration and after standing. The spectroscopic studies indicate that the extracted compound of rhodium is Rh(H₂O)_6–x Cl _x [H(DEHP)₂]_3–x (x=0, 1, 2).     

Synthesis and characterization of chloro-bis(quinoline-2-carboxylato-κ2N,O)gallium(III)

The preparation and characterization of a new gallium(III) complex with quinoline-2-carboxylate, of formula [Ga(quin-2-c)₂Cl], are described. The crystal structure of the complex has been determined by X-ray diffraction, crystallizing in monoclinic space group P2₁/n with Ga(III) adopting a distorted tetragonal pyramid. Gallium(III) coordinates two quinoline-2-carboxylates and one chloride with a Cl,N₂,O₂ donor set. In the crystal the 2-D supramolecular structure is generated by weak intermolecular interactions, C–H?···?O, C–H?···?Cl, and C–H?···?π. The cytotoxicity assays against several human cancer cell lines (Du145, A549, MCF-7, A498, HT-29) and against mouse fibroblasts (BALB/3T3) revealed moderate antiproliferative activity of the complex.     

[RhIII(Cp*)]‐Catalyzed ortho‐Selective Direct C(sp2)H Bond Amidation/Amination of Benzoic Acids by N‐Chlorocarbamates and N‐Chloromorpholines. A Versatile Synthesis of Functionalized Anthranilic Acids

A Rh^III‐catalyzed direct ortho‐C?H amidation/amination of benzoic acids with N‐chlorocarbamates/N‐chloromorpholines was achieved, giving anthranilic acids in up to 85 % yields with excellent ortho‐selectivity and functional‐group tolerance. Successful benzoic acid aminations were achieved with carbamates bearing various amide groups including NHCO₂Me, NHCbz, and NHTroc (Cbz=carbobenzyloxy; Troc=trichloroethylchloroformate), as well as secondary amines, such as morpholines, piperizines, and piperidines, furnishing highly functionalized anthranilic acids. A stoichiometric reaction of a cyclometallated rhodium(III) complex of benzo[h]quinoline with a silver salt of N‐chlorocarbamate afforded an amido–rhodium(III) complex, which was isolated and structurally characterized by X‐ray crystallography. This finding confirmed that the C?N bond formation results from the cross‐coupling of N‐chlorocarbamate with the aryl–rhodium(III) complex. Yet, the mechanistic details regarding the C?N bond formation remain unclear; pathways involving 1,2‐aryl migration and rhodium(V)– nitrene are plausible.     

Development and testing of a compact basis set for use in effective core potential calculations on rhodium complexes

We present a set of effective core potential (ECP) basis sets for rhodium atoms which are of reasonable size for use in electronic structure calculations. In these ECP basis sets, the Los Alamos ECP is used to simulate the effect of the core electrons while an optimized set of Gaussian functions, which includes polarization and diffuse functions, is used to describe the valence electrons. These basis sets were optimized to reproduce the ionization energy and electron affinity of atomic rhodium. They were also tested by computing the electronic ground state geometry and harmonic frequencies of [Rh(CO)₂μ‐Cl]₂, Rh(CO)₂ClPy, and RhCO (neutral and its positive, and negative ions) as well as the enthalpy of the reaction of [Rh(CO)₂μ‐Cl]₂ with pyridine (Py) to give Rh(CO)₂ClPy, at different levels of theory. Good agreement with experimental values was obtained. Although the number of basis functions used in our ECP basis sets is smaller than those of other ECP basis sets of comparable quality, we show that the newly developed ECP basis sets provide the flexibility and precision required to reproduce a wide range of chemical and physical properties of rhodium compounds. Therefore, we recommend the use of these compact yet accurate ECP basis sets for electronic structure calculations on molecules involving rhodium atoms. © 2012 Wiley Periodicals, Inc.     

Front Cover: Design,Synthesis and Photophysical Studies of Luminescent Rhodium(III) Complexes in Near-Infrared Region (Eur. J. Inorg. Chem. 11/2023)

A series of near-infrared (NIR)-emitting cyclometalated rhodium(III) complexes have been designed, synthesized and characterized. The NIR luminescence has been realized by rational design of strong σ-donor cyclometalating (C^N) ligand with extended π-conjugation structure for decreasing the energy level of intraligand (IL) state. In addition, the investigation of substituents on the benzo[g]quinoxaline moiety as the carbon-donor demonstrated that the luminescence can be further shifted to the red by the introduction of electron-donating thienyl groups. The luminescence maxima of these complexes are ranging from 763 nm to 792 nm with the luminescence quantum yield (Φ_lum) of 0.41 %–0.66 % in dichloromethane solution. This work demonstrates the first example of NIR-phosphorescent rhodium(III) complexes and provides an alternative for diversifying the development of NIR materials.     

Two Rhodium(III) Ions Confined in a [18]Porphyrin Frame: 5,10,15,20-Tetraaryl-21,23-Dirhodaporphyrin

Tetraaryl-21,23-dirhodaporphyrin and a series of related monorhodaporphyrins have been obtained by tellurium-to-rhodium exchange in a reaction of tetraaryl-21,23-ditelluraporphyrin with [RhCl(CO)₂]₂. These organometallic metallaporphyrins contain rhodium(III) centers embedded in rhodacyclopentadiene rings, incorporated within the porphyrin frames. The skeletons of 21,23-dirhodaporphyrin and 21-rhoda-23-telluraporphyrin are strongly deformed in-plane from the rectangular shape typical for porphyrins, due to rhodium(III) coordination preferences, the large size of the two core atoms, and the porphyrin skeleton constrains. These two metallaporphyrins exhibit fluxional behavior, as studied by ¹H NMR and DFT, involving the in-plane motion and the switch of the rhodium center(s) between two nitrogen donors. A side product detected in the reaction mixture, 21-oxa-23-rhodaporphyrin, results from tellurium-to-oxygen exchange, occurring in parallel to the tellurium-to-rhodium exchange. The reaction paths and mechanisms have been analyzed. The title 21,23-dirhodaporphyrin contains a bridged bimetallic unit, Rh₂Cl₂, in the center of the macrocycle, with two rhodium(III) ions lying approximately in the plane of the porphyrinoid skeleton. The geometry of the implanted Rh₂Cl₂ unit is affected by macrocyclic constrains.     

Synthesis of silylene-vinylene oligomers via catalytic polycondensation of divinyldimethylsilane

Acyclic diene polymerization (ADP) of divinyldimethylsilane in the presence of ruthenium RuCl₂(PPh₃)₃ and rhodium [RhCl(cod)]₂ catalysts led predominantly to linear silylene-vinylene oligomers (M_n = 1510 and M_w/M_n = 1.19) if the ruthenium catalyst was used or to mixture of cyclic and linear oligomers if rhodium complex was catalyst. © 1996 John Wiley & Sons, Inc.     

Development of an Improved Rhodium Catalyst for Z‐Selective Anti‐Markovnikov Addition of Carboxylic Acids to Terminal Alkynes

To develop more active catalysts for the rhodium‐catalyzed addition of carboxylic acids to terminal alkynes furnishing anti‐Markovnikov Z enol esters, a thorough study of the rhodium complexes involved was performed. A number of rhodium complexes were characterized by NMR, ESI‐MS, and X‐ray analysis and applied as catalysts for the title reaction. The systematic investigations revealed that the presence of chloride ions decreased the catalyst activity. Conversely, generating and applying a mixture of two rhodium species, namely, [Rh(DPPMP)₂][H(benzoate)₂] (DPPMP=diphenylphosphinomethylpyridine) and [{Rh(COD)(μ₂‐benzoate)}₂], provided a significantly more active catalyst. Furthermore, the addition of a catalytic amount of base (Cs₂CO₃) had an additional accelerating effect. This higher catalyst activity allowed the reaction time to be reduced from 16 to 1–4 h while maintaining high selectivity. Studies on the substrate scope revealed that the new catalysts have greater functional‐group compatibility.