Development and validation of a gas chromatographic—mass spectrometric procedure for the identification and quantification of residues of chloramphenicol

A method for the identification and quantification of residues of the antibiotic chloramphenicol was developed and validated. The method is based on combined gas chromatography-mass spectrometry with negative-ion chemical ionization and the use of [³⁷Cl₂]chloramphenicol as an internal standard. A set of identification criteria, in accordance with guidelines of the European Community, is described. For urine, muscle and eggs limits of detection and quantification of 0.1 μg kg^?1 are obtained. The method shows good repeatability and reproducibility. Results for urine were compared with those obtained with a radioimmunochemical procedure and an enzyme immunoassay (Quik-Card). Screening with an immunochemical procedure followed by confirmation with gas chromatography-mass spectrometry was found to be an effective strategy for monitoring residues of chloramphenicol in biological matrices.     

Determination of streptomycin residues in food by solid-phase extraction and liquid chromatography with post-column derivatization and fluorometric detection

A reliable and sensitive procedure is presented for the analysis of streptomycin (STP) in food of animal origin, like meat, milk and honey. The method is based on a separation by ion-pair liquid chromatography with β-naphthoquinone-4-sulfonate (NQS) postderivatization and fluorescence detection. The clean-up of the extract is done by solid-phase extraction, firstly with a cation-exchange cartridge and secondly with an octadecyl cartridge. The selectivity is very good and not many interfering peaks are observed for various food matrices. The streptomycin recovery of the total procedure is superior to 80%. The procedure is quantitatively characterized and repeatability, linearity, detection and quantification limits are very satisfactory. A special focus is given to STP residues in honeys and a survey on 64 commercial honeys is presented. For honey analysis, the HPLC method is compared with an immunoassay test (ELISA), and the possibility of using this test for screening with and without solid-phase extraction clean-up is also discussed.     

Determination of four nitroimidazole residues in poultry meat by liquid chromatography-mass spectrometry

A multi-residue liquid chromatography-mass spectrometry (LC-MS) assay method is described for the determination of four nitroimidazoles in poultry muscle. The extraction procedure is based on liquid-liquid extraction with ethyl acetate followed by an evaporation step. A deuterated internal standard is used. The LC separation was made on a C18 bonded silica column with an aqueous formic acid (0.2%) solution-methanol-acetonitrile (81:13:6) mobile phase. Following electrospray ionization, the protonated molecular ion [M+H]+ is obtained for each compound. Monitoring several ions for each nitroimidazole provides the specificity required for confirmatory assay. Validation of the method was performed to estimate linearity, intra-day and inter-day repeatability, accuracy and detection limit. The present method is capable of identifying nitroimidazole residues in muscle at levels below 5 microg/kg.     

Development of an improved method for trace analysis of chloramphenicol using molecularly imprinted polymers

A confirmatory method is described for the determination of the illegal antibiotic chloramphenicol using a specifically developed molecularly imprinted polymer (MIP) as the sample clean-up technique. The newly developed MIP was produced using an analogue to chloramphenicol as the template molecule. Using an analogue of the analyte as the template avoids a major traditional drawback associated with MIPs of residual template leeching or bleeding. The MIP described was used as a solid-phase extraction phase for the extraction of chloramphenicol from various sample matrices including honey, urine, milk and plasma. A full analytical method with quantification by LC-MS/MS is described. The method was fully validated according to the European Union (EU) criteria for the analysis of veterinary drug residues.     

Improvement of extraction procedure for biogenic amines in foods and their high-performance liquid chromatographic determination.

A high-performance liquid chromatography method is described for the simultaneous determination of the biogenic amines tryptamine, 2-phenylethylamine, putrescine, cadaverine, histamine, tyramine, spermidine, and spermine in cheese. The optimization of the procedure for the extraction of amines from the matrix is described. The separation of dansyl derivatives of the amines was achieved by reversed-phase liquid chromatography with gradient elution, followed by UV detection at 254 nm. The mobile phase was acetonitrile-0.01 M phosphate buffer (pH 7)-water. Under these conditions, rapid elution of the amines in less than 13 min was obtained. Validation of the method included calibration experiments, addition of standard amines for the determination of amine recoveries and repeatability tests.     

Simultaneous and rapid determination of deoxynivalenol and its acetylate derivatives in wheat flour and rice by ultra high performance liquid chromatography with photo diode array detection

A simple and reliable method of ultra high performance liquid chromatography coupled with photo‐diode array detection has been proposed for the simultaneous determination of deoxynivalenol and its acetylated derivatives in wheat flour and rice, especially focusing on the optimization of sample extraction, cleanup, and chromatographic separation conditions. Sample pretreatment consisted of a first step using a quick, easy, cheap, effective, rugged, and safe based extraction procedure and a subsequent cleanup step based on solid‐phase extraction. The method was extensively validated in wheat flour and rice, obtaining satisfactory analytical performance with good linearity (R² ≥ 0.999), acceptable recoveries (80.0–104.4%), and repeatability (RSDs 1.3–10.7%). The limits of detection (21.7–57.4 μg/kg) and quantitation (72.3–191.4 μg/kg) for deoxynivalenols were lower than those usually permitted by various countries’ legislation in these food matrices. The method was applied to 34 wheat and rice samples. The results were further compared with results of ultra high performance liquid chromatography with electrospray ionization tandem mass spectrometry.     

Determination of phenols in environmental samples by liquid chromatography – electrochemistry

A reverse-phase high-performance liquid chromatography procedure with gradient elution and electrochemical detection is described for the determination of phenolic compounds, including several priority pollutant chlorophenols, in sea-water and sediments. In addition, a method for concentrating phenols from sea-water was examined. A solid-phase extraction using a derivatized poly(styrene-divinylbenzene) copolymer is discussed. The recovery, repeatability and detection limits are shown. Electrochemical detection provided selectivity as well as sensitivity. Phenols at the ng/l level were detected. The method was applied to the analysis of the most important phenolic compounds in sea-water and marine sediments.     

Determination of aromatic amines from textiles using dispersive liquid–liquid microextraction

A dispersive liquid–liquid microextraction procedure coupled with GC‐MS is described for preconcentration and determination of banned aromatic amines from textile samples. Experimental conditions affecting the microextraction procedure were optimized. A mixture of 30 μL chlorobenzene (extraction solvent) and 800 μL ACN (disperser solvent), 5 min extraction time, and 5 mL aqueous sample volume were chosen for the best extraction efficiency by the proposed procedure. Satisfactory linearity (with correlation coefficients >0.9962) and repeatability (<9.78%) were obtained for all 20 aromatic amines; detection limits attained were much lower than the standardized liquid–liquid method. The proposed method has advantages of being quicker and easier to operate, and lower consumption of organic solvent.     

Determination of phenols in environmental samples by liquid chromatography – electrochemistry

A reverse-phase high-performance liquid chromatography procedure with gradient elution and electrochemical detection is described for the determination of phenolic compounds, including several priority pollutant chlorophenols, in sea-water and sediments. In addition, a method for concentrating phenols from sea-water was examined. A solid-phase extraction using a derivatized poly(styrene-divinylbenzene) copolymer is discussed. The recovery, repeatability and detection limits are shown. Electrochemical detection provided selectivity as well as sensitivity. Phenols at the ng/l level were detected. The method was applied to the analysis of the most important phenolic compounds in sea-water and marine sediments. Received: 12 April 1996 / Revised: 30 October 1996 / Accepted: 28 November 1996     

Development of coupled ultrasound‐assisted and reversed‐phase dispersive liquid–liquid microextraction before high‐performance liquid chromatography for the sensitive determination of vitamin A and vitamin E in oil samples

A new approach based on the ultrasound‐assisted reversed‐phase dispersive liquid–liquid microextraction technique is developed for the extraction and determination of vitamin A and vitamin E from oil matrices before high‐performance liquid chromatography analysis. A methodology based on the full factorial design is carried out to choose the significant parameters. Then the significant factors affecting the extraction efficiency including pH, volume of extraction solvent, and volume of disperser solvent are optimized using a Box–Behnken design. After analyzing the results obtained, the optimum conditions were: pH 4.5, 80–20 μL of the ethanol/water solvent mixture as extraction solvent, 110 μL of 1,4‐dioxane as the disperser solvent, and a sonication time of 10 min. For validation of the developed method, the linear dynamic range, repeatability, limit of detection, and recoveries were obtained under the optimum conditions. The detection limits of the method were 1.6 and 2.3 ng/mL for vitamin A and vitamin E, respectively. The extraction recovery percentages for the studied drugs were above 91%, with acceptable relative standard deviation. The proposed methodology was successfully applied for the determination of the vitamins in different oil samples.     

Determination of endocrine disrupting chemicals in environmental solid matrices by extraction with a non-ionic surfactant (Tween 80)

A readily applicable method based on extraction by aqueous non-ionic surfactant solutions (Tween 80) and RP-HPLC coupled to fluorescence detection, has been developed for the simultaneous determination of the phenolic endocrine disrupting chemicals (EDCs) nonylphenol (NP), nonylphenol monoethoxylate (NP1EO) and nonylphenol diethoxylate (NP2EO) and bisphenol A (BPA) in environmental solid matrices. Clean up of sample extracts was performed on Si-C18 solid phase extraction (SPE) cartridges. The overall Tween 80 extraction-SPE-RP-HPLC procedure was validated for accuracy and precision by analyzing sediment samples spiked with known amounts of EDCs. Recoveries for NP, NP1EO, NP2EO and BPA and limits of detection are in agreement with conventional extraction methods. The developed methodology was successfully applied to the analysis of target compounds in Italian river sediments, river suspended matter and benthonic macroinvertebrate organisms (oligochaetes Lumbriculus variegatus). Results confirmed that this relatively simple procedure performed satisfactorily in the determination of phenolic EDCs in environmental solid matrices of different complexity and that it can be a suitable alternative method to conventional systems even for routine analyses.     

Development of a sensitive determination method for benzotriazole UV stabilizers in enviromental water samples with stir bar sorption extraction and liquid desorption prior to ultra‐high performance liquid chromatography with tandem mass spectrometry

Benzotriazole UV stabilizers are emerging compounds used in personal care products and can enter surface water after passing through wastewater treatment plants without being removed. Because these analytes are strongly hydrophobic, there is an environmental risk of accumulation in solid matrices and magnification through the trophic chain. In this work, a method based on stir bar sorption extraction with liquid desorption is presented for the extraction of benzotriazole UV stabilizers from water samples. Stir bar sorptive extraction was combined with ultra‐high performance LC with MS/MS detection. All important factors affecting the stir bar sorptive extraction procedure are discussed, and the optimized method was applied to seawater and wastewater samples from Gran Canaria Island, providing good selectivity and sensitivity with LODs and limits of quantification in the range of 18.4–55.1 and 61.5–184 ng/L, respectively. Recoveries between 68.4–92.2% were achieved for the more polar compounds, whereas the recoveries were lower for the two less polar compounds, most likely due to their strong absorption into the polydimethylsiloxane stir bar phase that does not allows the complete desorption. The repeatability studies gave RSDs of between 6.45 and 12.6% for all compounds in the real samples.     

Selective determination of alkylmercury compounds in solid matrices after subcritical water extraction,followed by solid‐phase microextraction and GC–MS

A method for the extraction and determination of methylmercury (MeHg) in solid matrices is presented. Combining the advantages of two extraction techniques—subcritical water extraction (subWE) and solid‐phase microextraction (SPME)—selective separation of MeHg from soils is possible. The procedure is based on extraction with subcritical water without using organic solvents, followed by in situ aqueous‐phase derivatization with sodium tetraethylborate and headspace SPME with a silica fiber coated with poly(dimethylsiloxane). The optimization of the extraction parameters is described. The identification and quantification of the extracted alkylmercury compounds from spiked soil samples is performed by GC–MS after thermal desorption. Copyright © 2000 John Wiley & Sons, Ltd.     

Nanostructured copper‐coated solid‐phase microextraction fiber for gas chromatographic analysis of dibutyl phthalate and diethylhexyl phthalate environmental estrogens

A novel nanostructured copper‐based solid‐phase microextraction fiber was developed and applied for determining the two most common types of phthalate environmental estrogens (dibutyl phthalate and diethylhexyl phthalate) in aqueous samples, coupled to gas chromatography with flame ionization detection. The copper film was coated onto a stainless‐steel wire via an electroless plating process, which involved a surface activation process to improve the surface properties of the fiber. Several parameters affecting extraction efficiency such as extraction time, extraction temperature, ionic strength, desorption temperature, and desorption time were optimized by a factor‐by‐factor procedure to obtain the highest extraction efficiency. The as‐established method showed wide linear ranges (0.05–250 μg/L). Precision of single fiber repeatability was <7.0%, and fiber‐to‐fiber repeatability was <10%. Limits of detection were 0.01 μg/L. The proposed method exhibited better or comparable extraction performance compared with commercial and other lab‐made fibers, and excellent thermal stability and durability. The proposed method was applied successfully for the determination of model analytes in plastic soaking water.     

Screening method for detecting cross-contamination residues of tiamulin in swine feeds

A method was developed for the determination of tiamulin (TML), 14-deoxy-14-[(2-diethylaminoethyl)mercaptoacetoxy]mutilin hydrogen fumarate, a semisynthetic derivative of the naturally occurring antibiotic pleuromutilin produced by the fungus Pleurotus mutilis. This drug, with high activity against Gram-positive bacteria, some Gram-negative bacteria, and several strains of mycoplasms is administered to animals in food, drinking water, or by injection; however, its chemical structure causes problems in analysis of feeds. Although the molecule is charged below pH 8, attempts to analyze TML-containing extracts on ion-exchange columns or other polar stationary phases have failed. Additionally, TML shows no fluorescence activity and only poor UV activity. The present method consists of organic solvent extraction followed by liquid chromatography with UV detection. A low wavelength (208 nm) was used for detection. Limits of detection and quantitation, as well as data for recovery and repeatability obtained during characterization of the method, are described. The applicability of the optimized method was tested by analyzing commercial blank feeds processed after TML-medicated feeds.     

Analysis of polycyclic aromatic hydrocarbons in the particulate phase of cigarette smoke using a gas chromatographic-high-resolution mass spectrometric technique

A new procedure is developed for the extraction of polycyclic aromatic hydrocarbons (PAHs) from the particulate phase of cigarette smoke. The procedure applies solid-phase extraction using a Bond Elut CH cartridge as a sample preparation step. The efficiency of the cleanup procedure is verified using a gas chromatographic (GC)-high-resolution mass spectrometric (MS) technique, proving that no interference occurs in the PAHs' determination. The efficient cleanup allows GC detection using either high- or low-resolution MS detection. Enhanced sensitivity is obtained using GC-MS and selected ion monitoring. This new technique has several advantages over other reported techniques. The method is simple and robust and has good repeatability and accuracy. The estimated detection limit is 0.1 ng/cigarette for benzo[a]pyrene. In addition to that, the recovery from the smoke pad in which the smoke is collected is approximately 97% for all PAHs. Results for the PAH analyses for 1R5F, 1R4F, and 1R3 Kentucky reference cigarettes are reported in this study. These results provide useful evidence for clarifying the controversy about previously reported data.     

Fast clean-up for polychlorinated dibenzo-p-dioxins, dibenzofurans and coplanar polychlorinated biphenyls analysis of high-fat-content biological samples

A fast clean-up procedure for the low level analysis of polychlorinated dibenzo-p-dioxins. polychlorinated dibenzofurans and coplanar polychlorinated biphenyls in highly fatty biological matrices using high capacity disposable multi-layer silica columns is presented. Results were compared with gel permeation chromatography for removal of lipids. Analytical criteria such as recovery rates, repeatability, reproducibility and robustness are evaluated through a broad range of biological matrices and reference materials analysis. The final proposed procedure for the complete analysis, including pressurized liquid extraction, Power-Prep system clean-up and GC-high-resolution MS analysis requires only 48 h, and allows the simultaneous preparation of up to 10 samples.     

Novel Extraction for Endocrine Disruptors in Atmospheric Particulate Matter

A rapid and efficient sample preparation method, which is called microwave-assisted microsolid phase extraction, was developed for the determination of endocrine disrupting chemicals in atmospheric particulate matter. The endocrine disrupting chemicals included bisphenol A, diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate. The endocrine disrupting chemicals were isolated by microwave-assisted extraction following adsorption by copper(II) isonicotinate using microsolid phase extraction. The endocrine disrupting chemicals were subsequently determined by high performance liquid chromatography with an ultraviolet detector. The extraction was optimized for temperature, time, desorption time, and desorption solvent. Limits of detection (in the range of 2.0–8.5 nanograms per liter), limits of quantification (in the range of 6.6–28.0 nanograms per liter), and repeatability of the procedure (less than 10 percent) were established. Diethyl phthalate, diethyl phthalate, and di(2-ethylhexyl) phthalate were determined at values from 0.57 to 68.8 nanograms per cubic meter in atmospheric particulate matter collected from an urban area, a business center, and an industrial site in Dongguan, China. The concentration of bisphenol A was below the detection limit in these samples.     

Development and validation of a pre-column reversed phase liquid chromatographic method with fluorescence detection for the determination of primary phenethylamines in dietary supplements and phytoextracts

A sensitive and selective reversed-phase liquid chromatographic (RP-LC) method was developed and validated to determine octopamine, tyramine and Tyrosine (Tyr) in complex matrices as formulations and phytoextracts (Citrus aurantium), after pre-column derivatization with o-phthaldialdehyde (OPA) reagent. The chromatographic separations were performed at room temperature on a Phenomenex Luna C18 column using methanol and sodium acetate buffer (pH 5.5) by varying composition gradient elution as mobile phase and detected flurometrically at λ(em)=455 nm with λ(ex)=340 nm. The results obtained by the proposed method were compared with those achieved by a validated direct RP-LC method with fluorescence detection at λ(em)=310 nm with λ(ex)=275 nm, as reference method, using a Phenomenex Gemini C18 column under isocratic elution conditions with acetonitrile and sodium 1-heptanesulphonate (pH 3), as mobile phase. The higher sensitivity of the derivatization method (detection limit about 0.06 pmol) allowed the sure determination of octopamine present in traces in the examined samples. The repeatability of method (RSD) was ≤1.90% and there was no significant difference between repeatability and intermediate precision data. Recovery studies showed good results 99.5-101.3% with RSD ranging from 0.8 to 1.2%. All analyses were performed by mild conditions in absence of preliminary difficult extraction methodologies or laborious step of sample pre-treatment.     

Determination of phenol in water by flow injection analysis

Summary The adaptation of the manual standard method for the determination of phenols is described, e.g., condensation with 4-amino-antipyrine with subsequent oxidation and spectrophotometric detection. A FIA manifold for the automation of the phenol determination in the ranges 0.05–1.0 ppm and 1–15 ppm is presented. At a maximum injection frequency of 105/h the repeatability of consecutive injections is generally better than 1.5% r.s.d. resp. 1.0% r.s.d. By application of a new extraction module also the chloroform extraction step of the formed dye is automized. Compared to the direct FIA manifold a maximum sensitivity enhancement of 3.5 is obtained. The detection limit is 0.005 ppm phenol. In addition to the FIA methods a forced steam distillation procedure is described, which allows the distillation of phenols within 2–5 min.

---

Bestimmung von Phenol im Wasser mit Hilfe der Fließ-Injektionsanalyse