Conformational separation of monosaccharides of glycoproteins labeled with 2-aminoacrydone using microchip electrophoresis

The conformational separation of monosaccharides labeled with fluorescent 2-aminoacrydone (AMAC) was performed by electrophoresis on a plastic microchip with light-emitting diode confocal fluorescence detection. The AMAC-labeled five neutral monosaccharide mixture (D-glucose (Glc), D-mannose, D-galactose, L-fucose, and D-xylose) or two amino monosaccharide mixture (N-acetyl-D-glucosamine and N-acetyl-D-galactosamine) were well separated at pH 8.5 and 0.5% w/v methylcellulose of 200 mM borate buffer conditions using microchip electrophoresis. The separation was successfully performed considering the difference in stability of the complex between the hydroxyl residue of the monosaccharide and borate ions, and we found that 200 mM and pH 8.5 of borate buffer conditions were critical. High-speed separation for the neutral monosaccharides (50 s) and for amino monosaccharides (70 s) was attained at a 400 V/cm of electric field condition, showing all peak resolutions were greater than 0.9% and RSD of mobility were less than 1.9%. The detection limits of 0.86 microM for Glc and <1 microM for all other monosaccharides were enhanced with the addition of 0.5% w/v methylcellulose to the buffer. These attainments are fully compatible with conventional CE. The analysis of the subtle differences in the conformational stability and the value of the hydroxyl residue of the borate complex allowed the development of an efficient prospective tool for attaining high-resolution separation of monosaccharide mixtures having complicated and analogous conformations.     

Multichannel homogeneous immunoassay for detection of 2,4,6-trinitrotoluene (TNT) using a microfabricated capillary array electrophoresis chip

A high-throughput homogeneous immunoassay for the sensitive detection of 2,4,6-trinitrotoluene (TNT) has been developed using radial capillary array electrophoresis microdevices. Samples consisting of equilibrium mixtures of anti-TNT antibody (Ab), fluorescein-labeled TNT, and various concentrations of unlabeled TNT were electrokinetically injected into 48 channels of a radial capillary array electrophoresis microchannel plate. The rapid electrophoretic separation allows us to analyze the equilibrium ratio formed by the competition between the labeled and the unlabeled TNT for Ab binding. The simultaneous parallel TNT separations facilitate determination of a calibration curve for the TNT assay, which has high sensitivity (LOD, 1 ng/mL) and a wide dynamic range (1-300 ng/mL).     

Method development and validation for the separation and determination of omeprazole enantiomers in pharmaceutical preparations by capillary electrophoresis

A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents.     

Analysis of phenolic acids by non-aqueous capillary electrophoresis after electrokinetic supercharging

Electrokinetic supercharging (EKS), a new and powerful on-line preconcentration method for capillary electrophoresis, was utilized in non-aqueous capillary electrophoresis (NACE) to enhance the sensitivity of phenolic acids. The buffer acidity and concentration, leader and terminator length and electrokinetic injection time were optimised, with the optimum conditions being: a background electrolyte of 40 mM Tris-acetic acid (pH 7.9), hydrodynamic injection of 50 mM ammonium chloride (22 s, 0.5 psi) as leader, electrokinetic injection of the sample (180 s, -10 kV), hydrodynamic injection of 20 mM CHES (32 s, 0.5 psi) as terminator, before application of the separation voltage (-25 kV). Under these conditions the sensitivity was enhanced between 1333 and 3440 times when compared to a normal hydrodynamic injection with the sample volume <3% of the capillary volume. Detection limits for the seven phenolic acids were in the range of 0.22-0.51 ng/mL and EKS was found to be 3.6-7.9 times more sensitive than large-volume sample stacking and anion selective exhaustive injection for the same seven phenolic acids.     

Characterization of complexes between phenethylamine enantiomers and β‐cyclodextrin derivatives by capillary electrophoresis—Determination of binding constants and complex mobilities

To optimize chiral separation conditions and to improve the knowledge of enantioseparation, it is important to know the binding constants K between analytes and cyclodextrins and the electrophoretic mobilities of the temporarily formed analyte‐cyclodextrin‐complexes. K values for complexes between eight phenethylamine enantiomers, namely ephedrine, pseudoephedrine, methylephedrine and norephedrine, and four different β‐cyclodextrin derivatives were determined by affinity capillary electrophoresis. The binding constants were calculated from the electrophoretic mobility values of the phenethylamine enantiomers at increasing concentrations of cyclodextrins in running buffer. Three different linear plotting methods (x ‐reciprocal, y ‐reciprocal, double reciprocal) and nonlinear regression were used for the determination of binding constants with β‐cyclodextrin, (2‐hydroxypropyl)‐β‐cyclodextrin, methyl‐β‐cyclodextrin and 6‐O‐α‐maltosyl‐β‐cyclodextrin. The cyclodextrin concentration in a 50 mM phosphate buffer pH 3.0 was varied from 0 to 12 mM. To investigate the influence of the binding constant values on the enantioseparation the observed electrophoretic selectivities were compared with the obtained K values and the calculated enantiomer‐cyclodextrin‐complex mobilities. The different electrophoretic mobilities of the temporarily formed complexes were crucial factors for the migration order and enantioseparation of ephedrine derivatives. To verify the apparent binding constants determined by capillary electrophoresis, a titration process using ephedrine enantiomers and β‐cyclodextrin was carried out. Furthermore, the isothermal titration calorimetry measurements gave information about the thermal properties of the complexes.     

Development of a capillary zone electrophoresis method for the separation of a furan combinatorial library

Nine component mixtures of a furan library were simultaneously separated by capillary zone electrophoresis (CZE) using a phosphate buffer as a background electrolyte at low pH. The effects of buffer concentration, buffer pH, type and concentration of organic solvents on the electrophoretic mobility, resolution, and analysis time were systematically investigated. Resolution and efficiency of furan library components were further improved using cyclodextrin (CD)-modified CZE. Under optimum conditions, eight of the nine furans were baseline-resolved in less than 10 min at 30 kV using 50 mM phosphate buffer, 10% v/v acetonitrile (ACN), pH 2.0, with 5 mM gamma-CD.     

Separation and determination of magnolol and honokiol inMagnolia officinalis bark by capillary zone electrophoresis

The effects of pH on separation parameters such as migration mobility, resolution, sensitivity, column efficiency and peak shape were emphatically studied. Better separation of magnolol and honokiol using capillary zone electrophoresis was achieved by optimizing pH in the range 5.0–11.7. The influences of applied voltage and temperature were also investigated. We adopted a better sample extraction procedure by which higher contents of honokiol and magnolol with sample compositions unchanged were obtained. The analysis was performed with direct UV detection using a 10 mM borate-10 mM phosphate buffer at pH of 11.6. The method was successfully applied to the simultaneous determination of magnolol and honokiol inMagnolia officinalis bark within 9 min.     

Determination of the Critical Micelle Concentration of Cationic Surfactants by Capillary Electrophoresis

The determination of the critical micelle concentration (CMC) of cationic surfactants by capillary electrophoresis was demonstrated. In this study, tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium bromide (DoTAB) were selected as cationic surfactants and propazine was chosen as test solute. In the evolution of the effective electrophoretic mobility of propazine as a function of surfactant concentration, a dramatic change in slope at a particular concentration is a good indication of the CMC of this surfactant. The CMC values determined experimentally were further confirmed by a curve-fitting approach. Simulation of the electrophoretic mobility curves as a function of surfactant concentration in both micellar electrokinetic chromatography and capillary zone electrophoresis using cationic surfactants as an electrolyte modifier was performed for propazine, and the intersection of these two mobility curves allowed us to precisely predict the CMC of the surfactant. The CMC values determined for TTAB and DoTAB are 1.6 ± 0.1 and 11.0 ± 0.1 mM, respectively, in the case of an electrolytic solution consisting of 70 mM phosphate buffer at pH 6.0. Moreover, the applicability of the electroosmotic mobility as a parameter for the determination of the CMC was examined.     

Chemical analysis of raw, dry-roasted, and honey-roasted licorice by capillary electrophoresis

In herbal medicine, licorice is usually processed using a roasting procedure which might modify the chemical compositions in licorice. To test this hypothesis, licorice root samples were roasted under various conditions (with or without honey) and subsequently extracted by refluxing with 95% ethanol. The analysis of chemical compositions of licorice root extracts was achieved by capillary electrophoresis. The running buffer has been optimized to be 50 mM sodium tetraborate (pH 9.01) containing 5 mM beta-cyclodextrin. Thermal decomposition of glycyrrhizin, which was a major ingredient in licorice, was first studied in detail, indicating the conversion of glycyrrhizin to glycyrrhetinic acid. The licorice extracts were then analyzed to indicate the above thermal conversion did occur in the licorice samples. This finding may shed some light on understanding the differences in the therapeutic values of raw versus roasted licorice in herbal medicine.     

Direct and sensitive analysis of methamphetamine, ketamine, morphine and codeine in human urine by cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography

Cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography (CSEI-Sweep-MEKC) was directly used to test some abuse drugs in human urine, including morphine (M), codeine (C), ketamine (K) and methamphetamine (MA). First, phosphate buffer (50 mM, pH 2.5) containing 30% methanol was filled into uncoated fused silica capillary (40 cm, 50 microm I.D.), then high conductivity buffer (100 mM phosphate, 6.9 kPa for 99.9 s) was followed. Electrokinetic injection (10 kV, 500 s) was used to load samples and to enhance sensitivity. The stacking step and separation were performed at -20 kV and 200 nm using phosphate buffer (25 mM, pH 2.5) containing 20% methanol and 100 mM sodium dodecyl sulfate. Using CSEI-Sweep-MEKC, the analytes could be simultaneously analyzed and have a detection limit down to ppb level. It was unnecessary to have sample pretreatments. During method validation, calibration plots were linear (r>or=0.9982) over a range of 150-3,000 ng/mL for M and C, 250-5,000 n g/mL for MA, and 50-1,000 ng/mL for K. The limits of detection were 15 ng/mL for M and C, and 5 ng/mL for MA and K (S/N=3, sampling 500 s at 10 kV). Comparing with capillary zone electrophoresis, the results indicated that this stacking method could increase 6,000-fold sensitivity for analysis of MA. Our method was applied for analysis of 28 real urine samples. The results showed good coincidence with immunoassay and GC-MS. This method was feasible for application to detect trace levels of abused drugs in forensic analysis.     

Effect of the Buffer Concentration on the Separation of Lactate Dehydrogenase Isoenzymes from Different Sources by Electrophoresis

Abstract

The separation of lactate dehydrogenase isoenzymes by zone electrophoresis using cellulose acetate strips as support was dependent on the concentration of the buffer used (5 mM and 50 mM, pH 7.4) and on the source of the material (chicken liver or guinea-pig liver).

In three different 5 mM buffer systems, pH 7.4 (phosphate, veronal and Tris-HC1) the four lactate dehydrogenase isoenzymes present in chicken liver cytosol: M₃H, M₂H₂, MH₃ and H₄ were resolved into four separated bands. M₃H and M₂H₂ isoenzymes migrated towards the cathode whereas the other two isoenzymes showed anodic mobilities. In 50 mM buffers, pH 7.4 all enzyme activity appeared as a single band with anodic mobility similar to that of H₄. Guinea-pig liver isoenzymes were well resolved in both buffer conditions and appeared as five bands with anodic mobilities.

The different behaviour of the lactate dehydrogenase isoenzymes in 5 mM and 50 mM buffers can not be assigned to ionic strength effects but it may explained by assuming the binding of buffer anions to the different isoenzymes. The binding would increase with the molar concentration of the buffer and reduce charge differences among the isoenzymes to different extents depending on the source of the enzyme, chicken or guinea-pig liver.     

Determination of carbohydrates as their 3-aminophthalhydrazide derivatives by capillary zone electrophoresis with on-line chemiluminescence detection

A method based on pre-capillary derivatization with luminol (3-aminophthalhydrazide) for carbohydrate analysis using capillary electrophoresis with on-line chemiluminescence (CL) detection was developed. The derivatives of seven monosaccharides were separated and detected by using 200 mM borate buffer containing 100 mM hydrogen peroxide at pH 10.0 as separation electrolyte and 25 mM hexacyanoferrate in 3 M sodium hydroxide solution as post-capillary chemiluminescence reagent with separation efficiencies ranging from 160,000 to 231,000 plates per metre. The minimum amount of carbohydrate derivatized was 2 pmol (corresponding to the concentration of 2 microM). The method also provided a linear response for glucose in the concentration range of 0.1-250 microM with a mass detection limit of 420 amol or a concentration detection limit of 0.1 microM. Preliminary work using the CE-CL format to determine glucose in a rat brain microdialysis sample is presented as a typical case.     

糖类衍生物在毛细管区带电泳下的分离研究

以新合成的1-萘基-3-甲基-5-吡唑啉酮(NMP)为柱前衍生试剂,采用毛细管区带电泳模式考察并优化了糖类衍生物的分离条件。实验采用58.5cm×50μmi.d.毛细管(有效柱长50cm),55mmol/L硼酸盐缓冲溶液(pH9.46),柱温20℃,分离电压22kV,进样10s,在不加任何添加剂的情况下,高效、快速地实现了9种糖的基线分离,并在最优化条件下进行了唐古特白刺实际样品的分离分析,结果令人满意。     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Capillary zone electrophoresis of soil humic acid fractions obtained by coupling size-exclusion chromatography and polyacrylamide gel electrophoresis

Capillary zone electrophoresis (CZE) was used for characterisation of soil humic acid (HA) fractions obtained by coupling size-exclusion chromatography with polyacrylamide gel electrophoresis, on the basis of their molecular size and electrophoretic mobility. CZE was conducted using several low alkaline buffers as background electrolyte (BGE): 50 mM carbonate, pH 9.0; 50 mM phosphate, pH 8.5; 50 mM borate, pH 8.3; 50 mM Tris-borate+1 mM EDTA+7 M urea+0.1% sodium dodecyl sulphate (SDS), pH 8.3. Independently of BGE conditions, the effective electrophoretic mobility of HA fractions were in good agreement with their molecular size. The better resolution of HA were obtained in Tris-borate-EDTA buffer with urea and SDS. This results indicated that CZE, mostly with BGE-contained disaggregating agents, is useful for separating HAs in fractions with different molecular sizes.     

Capillary electrophoresis of FITC labeled amino acids with laser-induced fluorescence detection

FITC labeled amino acids have been separated using a home-huilt capillary electrophoresis with a laserinduced fluorescence detection (CE-LIF) system. Seventeen peaks can now be generated from the twenty common amino acids. The key conditions lie in the optimization of pH, buffer electrolytes and buffer additives.     

Affinity capillary electrophoresis and density functional theory applied to binding constant determination and structure elucidation of hexaarylbenzene-based receptor complex with ammonium cation

Affinity capillary electrophoresis (ACE) and quantum mechanical density functional theory (DFT) calculations have been employed for the investigation of noncovalent interactions between hexaarylbenzene-based receptor (R) and ammonium cation NH(4)(+). Firstly, by means of ACE, the binding constant of the NH(4)R(+) complex in methanol was estimated from the dependence of the effective electrophoretic mobility of the receptor R (in advance corrected by our earlier developed procedure to a reference temperature of 25°C) on the concentration of ammonium ion in the background electrolyte using non-linear regression analysis. The logarithmic form of the apparent binding (stability) constant of NH(4)R(+) complex in the methanolic background electrolyte (25 mM Tris, 50 mM chloroacetate, pH(MeOH) 7.8) was evaluated as log K(NH(4)R) = 4.03 ± 0.15. Secondly, the structural characteristics of NH(4)R(+) complex were determined by DFT calculations.     

Stacking and quantitative analysis of lovastatin in urine samples by the transient moving chemical reaction boundary method in capillary electrophoresis

A simple, sensitive, and useful concentration method for lovastatin (Lvt) in urine has been developed based on the transient moving chemical reaction boundary method (tMCRBM) in capillary electrophoresis. The MCRB is formed with acidic sample buffer (Gly-HCl) and alkaline running buffer (Gly-NaOH). The following optimal conditions were determined for stacking and separation: electrophoretic buffer of 100 mM Gly- NaOH (pH 11.52), sample buffer of 20 mM Gly-HCl (pH 4.93), fused-silica capillary of 76 cm × 75-μm i.d (67 cm from detector), sample injection at 14 mbar for 3 min. A 21- to 26-fold increase in peak height was achieved for detection of Lvt in urine under the optimal conditions compared with normal capillary zone electrophoresis. By combining the sample pretreatment procedure with the stacking method, the sensitivity of Lvt in urine was increased by 105- to 130-fold. The limits of detection (LOD) and quantification (LOQ) for Lvt in urine were decreased to 8.8 ng/mL and 29.2 ng/mL, respectively. The intra-day and inter-day precision values (expressed as RSD) were 2.23–3.61% and 4.03–5.05%, respectively. The recoveries of the analyte at three concentration levels changed from 82.65 to 100.49%.     

Chiral capillary electrophoretic separation of amino acids derivatized with 9-fluorenylmethylchloroformate using mixed chiral selectors of beta-cyclodextrin and sodium taurodeoxycholate

Chiral separation of 19 pairs of amino acid (AA) enantiomers derivatized with 9-fluorenylmethylchloroformate (FMOC) was successfully conducted by capillary electrophoresis using the mixture of beta-CD and sodium taurodeoxycholate (STDC) as selectors. Resolution was considerably superior to that obtained by using either beta-CD or STDC alone. After a systematic inspection, a buffer composed of 150 mM borate and 18% v/v isopropanol at pH 8.0, dissolved with 30 mM beta-CD and 30 mM STDC, was adopted and able to generate baseline resolution (>1.50) for 17 pairs of FMOC-AA enantiomers and somewhat lower resolution for arginine (1.36) and alanine (1.18), respectively. Experimental data revealed that the addition of the second selector did not increase the mobility difference between a pair of enantiomers (Delta mu = mu(D) - mu(L) and the number of theoretical plates (N), but decreased the summed apparent mobility of a pair of enantiomers (Sigma mu = mu(D) - mu(L)), which was mainly due to the decrease of the electroosmotic flow. The variation of Sigma mu was thus the major reason responsible for the improvement of chiral resolution in this study. The result demonstrated that not only the intrinsic selectivity of the selectors was the basis of the chiral separation, but also the non-chiral effect of the selectors, the change of the electroosmotic flow, was an important factor in enhancing the enantioseparation resolution. This study could probably help to explain the reasons for resolution improvement in some dual selectors systems, which are not very clear at present.     

Online stacking of carboxylated magnetite core–shell nanoparticles in capillary electrophoresis

The stacking effect on carboxylated magnetite core–shell nanoparticles using sodium borate buffer pH 9.5 as the background electrolyte is presented. The ionic strength of the background electrolyte ranged from 5 to 100 mM, and the ionic strength of a sample zone ranged from 5 to 100 mM. Moreover, water was used as the sample dispersant. Both stacking and de‐stacking effects were observed when conductivities of the sample zone and the background electrolyte differed. An explanation of carboxylated magnetic core‐shell nanoparticles behavior was suggested based on the Derjaguin–Landau–Verwey–Overbeek theory supposing that the aggregation point is defined by the energetic barrier as the sum of energies given by electrostatic interactions and Van der Waals interactions. Moreover, the stacking conditions were applied for the evaluation of the lowest detectable dilution of magnetic nanoparticles. The carboxylated magnetic nanoparticles were dispersed in 10 mM borate/NaOH pH 9.5 and injected for 60 s to the background electrolyte composed of 100 mM borate/NaOH pH 9.5 that allowed the detection of 100‐fold diluted nanoparticles.