Novel superstructure of nondiscoid mesogens: uneven-parallel association of half-disk molecules, 3,4,5-trialkoxybenzoic anhydrides, to a columnar structure and its one-directionally geared interdigitation

Compact and simple nondiscoid mesogens, trialkoxybenzoic anhydrides 2-11 ((RO)(3)C(6)H(2)-CO-O-CO-C(6)H(2)(OR)(3), R = C(2)H(5), n-C(3)H(7), n-C(4)H(9), n-C(6)H(13), n-C(8)H(17), n-C(10)H(21), n-C(12)H(25), n-C(14)H(29), n-C(16)H(33), and (S)- and (R)-3,7-dimethyloctyl) were designed and synthesized, and their superstructures were investigated by polarized light microscopy, differential scanning calorimetry, calculation (MM2 and AM1), circular dichroism spectroscopy, and X-ray diffraction. As the result, in the cases of 5-9 and 11, the half-disk molecules in the liquid crystal phases were self-assembled by the dipole-dipole interaction between their carbonyl groups to a column in which the molecules were piled up in an alternately antiparallel manner, and the columns were interdigitated each other. The observed interdigitations were highly directional in the perpendicular direction to the column axis. In the case of compound 11 which has (S)- or (R)-3,7-dimethyloctyl groups, a helical organization of the molecules in the column was estimated from the peaks in the circular dichroism spectra. This is the first report of a one-directionally interdigitated columnar phase, and these compounds are the first liquid crystalline acid anhydrides. It was demonstrated that a -CO-O-CO- moiety is useful as a polar junction in liquid crystalline compounds.     

Laser ablation synthesis of new phosphorus nitride clusters from α-P3N5 via Laser Desorption Ionization and Matrix Assisted Laser Desorption Ionization Time-Of-Flight Mass Spectrometry

Phosphorus nitride clusters generated during Laser Desorption Ionization (LDI) and Matrix-Assisted Laser Desorption Ionization (MALDI) of solid P(3) N(5) were analyzed via Time-of-Flight Mass Spectrometry (TOF MS). The LDI TOF mass spectra show the formation of series of clusters: P(m)N(n)(+) {(m=1; n=8-11), (m=4; n=3-4), (m=5; n=1-5), (m=6; n=1-3, 5-8), (m=2-7; n=1), (m=5-10; n=2), (m=4-6; n=3), (m=4,5; n=4), (m=5,6; n=5)}, and P(m)N(n)(-) (m=4,5; n=1). Using 3-hydroxypicolinic acid (HPA) as a matrix the P(m)N(n)(+) species (m=1-4, 6, 8) with a high nitrogen content (n=4, 5, 8, 10-12, 20) were identified. The formation of a N(6)(-) cluster was also detected using a C(60) matrix. Under various conditions singly charged P(m)(+) (m=2-7, 9, 13), P(m)(-) (m=3-11, 13, 15, 17), N(n)(+) (n=5, 9, 10, 12, 13), and N(n)(-) (n=6, 10-15) clusters were identified in the mass spectra. Such high nitrogen content clusters (up to N(15)(-)) generated by laser desorption from a solid material are described for the first time. The stoichiometry of the P(m)N(n) clusters was determined via isotopic envelope analysis and computer modelling. The composition of the clusters with respect to the crystalline structure of α-P(3)N(5) is discussed.     

Beta-1,3-glucan polysaccharide (schizophyllan) acting as a one-dimensional host for creating supramolecular dye assemblies

We have demonstrated that one-dimensional supramolecular dye assemblies with a uniform diameter can be created by utilizing schizophyllan (SPG) as a one-dimensional host. In the supramolecular nanofibers, the dye molecules are assembled into the different aggregation modes depending on the preparation procedures. The findings establish that SPG is useful for creating the supramolecular nanofibers, where temporal superstructures can be stabilized by the SPG-specific helical higher-order structure. [structure: see text].     

Supramolecular p-n-heterojunctions by co-self-organization of oligo(p-phenylene vinylene) and perylene bisimide dyes

Comparative studies on hydrogen-bonded versus covalently linked donor-acceptor-donor dye arrays obtained from oligo(p-phenylene vinylene)s (OPVs) as donor and bay-substituted perylene bisimides (PERYs) as acceptor dyes are presented. Both systems form well-ordered J-type aggregates in methylcyclohexane, but only hydrogen-bonded arrays afford hierarchically assembled chiral OPV-PERY dye superstructures consisting of left-handed helical pi-pi co-aggregates (CD spectroscopy) of the two dyes that further assemble into right-handed nanometer-scale supercoils in the solid state (AFM study). In the case of hydrogen-bonded arrays, the stability of the aggregates in solution increases with increasing conjugation length of the OPV unit. The well-defined co-aggregated dyes presented here exhibit photoinduced electron transfer on subpicosecond time scale, and thus, these supramolecular entities might serve as valuable nanoscopic functional units.     

Synthesis and hierarchical superstructures of side‐chain liquid crystal polyacetylenes containing galactopyranoside end‐groups

Three kinds of chiral saccharide‐containing liquid crystalline (LC) acetylenic monomers were prepared by click reaction between 2‐azidoethyl‐2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranoside and 1‐biphenylacetylene 4‐alkynyloxybenzoate. The obtained monomers were polymerized by WCl₆‐Ph₄Sn to form three side‐chain LC polyacetylenes containing 1‐[2‐(2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranos‐1‐yl)‐ethyl]‐1H‐[1,2,3]‐triazol‐4′‐biphenyl 4‐alkynyloxybenzoate side groups. All monomers and polymers show a chiral smectic A phase. Self‐assembled hiearchical superstructures of the chiral saccharide‐containing LCs and LCPs in solution state were studied by field‐emission scanning electron microscopy. Because of the LC behavior, the LC molecules exhibit a high segregation strength for phase separation in dilute solution (THF/H₂O = 1:9 v/v). The self‐assembled morphology of LC monomers was dependent upon the alkynyloxy chain length. Increasing the alkynyloxy chain length caused the self‐assembled morphology to change from a platelet‐like texture ( LC‐6 ) to helical twists morphology ( LC‐11 and LC‐12 ). Furthermore, the helical twist morphological structure can be aligned on the polyimide rubbed glass substrate to form two‐dimensional ordered helical patterns. In contrast to LC monomers, the LCP‐11 self‐assembled into much more complicate morphologies, including nanospheres and helical nanofibers. These nanofibers are evolved from the helical cables ornamented with entwining nanofibers upon natural evaporation of the solution in a mixture with a THF/methanol ratio of 3:7. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6596–6611, 2009     

Columnar mesophases based on zinc chlorophyll derivatives functionalized with peripheral dendron wedges

A chlorophyll derivative with a central zinc ion, a methoxy functionality at its 3(1)-position, and functionalized with a second-generation dendron (3,4-3,4,5)12G2-CH(2)OH at its 17(2)-position was synthesized starting from natural chlorophyll a (Chl a). This compound exhibits liquid crystalline (LC) behavior and its mesomorphic properties have been characterized by differential scanning calorimetry (DSC), polarisation optical microscopy (POM), powder X-ray diffraction (XRD), and scanning probe microscopy (SPM). A combination of powder XRD, high resolution scanning tunneling microscopy (STM), and atomic force microscopy (AFM) experiments revealed the formation of nano-segregated well-ordered columnar tubular superstructures consisting of about five molecules in the column stratum. These self-assembled columns are further self-organized into a two-dimensional oblique unit cell lattice. Semiconducting behavior of this compound has been studied by pulse-radiolysis time-resolved microwave conductivity (PR-TRMC) method and charge carrier mobility values of ～10(-2) cm(2) V(-1) s(-1) are observed. Such organized columnar superstructures constructed from semisynthetic zinc chlorins are reminiscent of the tubular organization of the bacteriochlorophyll dyes in the light-harvesting chlorosomal antennae of green sulphur bacteria.     

Morphology of protonated methanol clusters: an infrared spectroscopic study of hydrogen bond networks of H+(CH3OH)n (n = 4-15)

Infrared spectroscopy of large-sized protonated methanol clusters, H(+)(MeOH)(n) (n = 4-15), was carried out in the OH stretch region to characterize the development of the hydrogen bond network with the cluster size, n. The band intensity of the free OH stretching mode decreased with n, and the band finally disappeared at n = 7. On the other hand, the broad absorption band due to hydrogen-bonded OH stretches exhibited a remarkable shift with the cluster size, and it finally converged on 3300 cm(-1) for n >/= approximately 10. The size dependence of the infrared spectra was morphologically interpreted in terms of the formation of the bicyclic hydrogen-bonded structure of the clusters.     

Photoresponsive self-assembly and self-organization of hydrogen-bonded supramolecular tapes

Self-assembling building blocks that are readily functionalizable and capable of achieving programmed hierarchical organization have enabled us to create various functional nanomaterials. We have previously demonstrated that N,N'-disubstituted 4,6-diaminopyrimidin-2(1 H)-one (DAP), a guanine-cytosine hybridized molecule, is a versatile building block for the creation of tapelike supramolecular polymer species in solution. In the current study, DAP was functionalized with azobenzene side chains. 1H NMR, UV/Vis, and dynamic light scattering studies confirmed the presence of nanometer-scale tapelike supramolecular polymers in alkane solvents at micromolar regimes. At higher concentrations (millimolar regimes), the supramolecular polymers hierarchically organized into lamellar superstructures to form organogels, as shown by X-ray diffraction and polarized optical microscopy. Remarkably, the azobenzene side chains are photoisomerizable even in the supramolecular polymers, owing to their loosely packed state supported by the rigid hydrogen-bonded scaffold, enabling us to establish photocontrollable supramolecular polymerization and higher order organization of the tapelike supramolecular polymers into lamellar superstructures.     

Formation of aluminium, aluminium nitride and nitrogen clusters via laser ablation of nano aluminium nitride. Laser Desorption Ionisation and Matrix-Assisted Laser Desorption Ionisation Time-of-Flight Mass Spectrometry

Laser Desorption Ionisation (LDI) and Matrix-Assisted Laser Desorption Ionisation (MALDI) Time-of-Flight Mass Spectrometry (TOFMS) were used to study the pulsed laser ablation of aluminium nitride (AlN) nano powder. The formation of Al(m)(+) (m=1-3), N(n)(+) (n=4, 5), AlN(n)(+) (n=1-5, 19, 21), Al(m)N(+) (m=2-3), Al(3)N(2)(+), Al(9)N(n)(+) (n=5, 7, 9, 11 and 15), Al(11)N(n)(+) (n=4, 6, 10, 12, 19, 21, 23, and 25), and Al(13)N(n)(+) (n=25, 31, 32, 33, 34, 35, and 36) clusters was detected in positive ion mode. Similarly, Al(m)(-) (m=1-3), AlN(n)(-) (n=1-3, 5), Al(m)N(-) (n=2, 3), Al(2)N(n)(-) (n=2-4, 28, 30), N(n)(-) (n=2, 3), Al(4)N(7)(-) Al(8)N(n)(-) (n=1-6), and Al(13)N(n)(-) (n=9, 18, 20, 22, 24, 26, 28, 33, 35, 37, 39, 41 and 43) clusters were observed in negative ion mode. The formation of the stoichiometric Al(10) N(10) cluster was shown to be of low abundance. On the contrary, the laser ablation of nano-AlN led mainly to the formation of nitrogen-rich Al(m)N(n) clusters in both negative and positive ion mode. The stoichiometry of the Al(m)N(n) clusters was determined via isotopic envelope analysis and computer modelling.     

7-N-(mercaptoalkyl)mitomycins: implications of cyclization for drug function

The Kyowa Hakko Kogyo and Bristol-Myers Squibb companies reported that select mitomycin C(7) aminoethylene disulfides displayed improved pharmacological profiles compared with mitomycin C (1). Mechanisms have been advanced for these mitomycins that differ from 1. Central to many of these hypotheses is the intermediate generation of 7-N-(2-mercaptoethyl)mitomycin C (5). Thiol 5 has been neither isolated nor characterized. Two efficient methods were developed for mitomycin (porfiromycin) C(7)-substituted thiols. In the first method, the thiol was produced by a thiol-mediated disulfide exchange process using an activated mixed mitomycin disulfide. In the second route, the thiol was generated by base-mediated cleavage of a porfiromycin C(7)-substituted thiol ester. We selected four thiols, 7-N-(2-mercaptoethyl)mitomycin C (5), 7-N-(2-mercaptoethyl)porfiromycin (12), 7-N-(2-mercapto-2-methylpropyl)mitomycin C (13), and 7-N-(3-mercaptopropyl)porfiromycin (14), for study. Thiols 5 and 12-14 differed in the composition of the alkyl linker that bridged the thiol with the mitomycin (porfiromycin) C(7) amino substituent. Thiol generation was documented by HPLC and spectroscopic studies and by thiol-trapping experiments. The linker affected the structure of the thiol species and the stability of the thiol. We observed that thiols 5 and 12 existed largely as their cyclic isomers. Evidence is presented that cyclization predominantly occurred at the mitomycin C(7) position. Correspondingly, alkyl linker substitution (13) or extension of the linker to three carbons (14) led to enhanced thiol stability and the predominant formation of the free thiol species. The dominant reaction of thiols 5 and 12-14 or their isomers was dimerization, and we found no evidence that thiol formation led to mitosene production and aziridine ring-opening. These findings indicated that thiol generation was not sufficient for mitomycin ring activation. The potential pharmacological advantages of mitomycin C(7) aminoethylene disulfides compared with 1 is discussed in light of the observed thiol cyclization pathway.     

Supramolecular polymerization and polymorphs of oligo(p-phenylene vinylene)-functionalized bis- and monoureas

Bis- and monoureas hybridized with the oligo(p-phenylene vinylene) (OPV) pi-electronic segment and 3,4,5-tridodecyloxyphenyl wedge were synthesized and their supramolecular polymerization in diluted solution, gel formation in concentrated solution, and liquid crystallinity in bulk state were investigated. Bisurea 1a featuring a hexamethylene linker showed the highest supramolecular polymerization ability and formed tapelike nanofibers that can gelate various organic solvents. On the other hand, bisurea 1b featuring a dodecamethylene linker and monourea 2 showed a lower degree of supramolecular polymerization, resulting in gel formations in a smaller variety of solvents. These results clearly reflect a high level of cooperativity between the two urea sites and the two OPV segments of 1a upon hydrogen-bonding and pi-pi stacking interactions, respectively. When the gels of 1a, 1b, and 2 were dried, all the compounds self-organized into multilamellar superstructures. Thermal treatment of these lamellae at high temperatures induces columnar liquid-crystalline mesophases as a result of microsegregation between the rigid OPV parts and the molten aliphatic wedges. These results demonstrate that the present molecular constituent is very useful for fabricating dye-based functional assemblies providing nanoscale pi-electronic fibers, and solvent-incorporated and bulk soft materials.     

Design and synthesis of porphyrins bearing rigid hydrogen bonding motifs: highly versatile building blocks for self-assembly of polymers and discrete arrays

Two aldehydes, 2,6-diacetamido-4-formylpyridine (7) and 1-butyl-6-formyluracil (11), are used to synthesize five pyridyl and four uracyl meso-subsituted porphyrins. With these complementary porphyrin building blocks, it is possible to build various types of multi-porphyrin supramolecules with different spatial relationships in predefined geometries. The formation and properties of self-complementary dimers and a closed tetrameric square are presented as a basis of comparison to the latter system in the solid state. An X-ray structure of 5,10-bis(4-tert-butylphenyl)-15,20-bis(3,5-diacetamido-4-pyridyl)porphyrin confirms its molecular structure and reveals a hydrogen-bonded supramolecular organization mediated by water molecules.     

Pentadentate terpyridine-catechol linked ligands and their cobalt(III) complexes

A series of novel pentadentate terpyridine-catechol linked ligands were prepared, in which the terpyridine and catechol moieties were linked together by (CH2)n chains of different lengths (n = 4-6). Together with 1-methylimidazole, these ligands formed low-spin, six-coordinate Co(III) complexes. Two of the complexes (n = 4, 5) were characterized by X-ray crystallography [n = 4, monoclinic, P2(1)/c, a = 14.957(7) A, b = 10.585(9) A, c = 23.033(7) A, beta = 106.01(3) degrees, V = 3505(3) A3, Z = 4, R = 0.063; n = 5, monoclinic, P2(1)/c, a = 8.848(7) A, b = 15.78(1) A, c = 25.455(7) A, beta = 93.90(5) degrees, V = 3544(3) A3, Z = 4, R = 0.056], which revealed similar structures around the Co(III) centers but different conformations for the (CH2)n linkers. The (CH2)4 linker showed a straight, symmetric conformation whereas the (CH2)5 linker showed a curved conformation that allowed the accommodation of one extra CH2 unit, suggesting that the (CH2)4 linker presents the "best-fit" length for these complexes.     

Hydrogen-bonded 1D and 2D Assemblies of Tetraiso-butyl-resorcin[4]arene in the Crystalline State

1 INTRODUCTION There is continuing interest in the assembly of molecular capsules based on concomitant formation of multiple hydrogen bonds between smaller mole- cular components[1]. A particularly attractive buil- ding block is calix[4]resorcinarenes with eight pen- dant hydroxyl functional groups[2]. In a crystal engi- neering design strategy for molecular self-assembly, cocrystallization of C-methylcalix[4]resorcinarenes with nitrogen-donor molecules such as pyridines in the presence …     

Solid-state preparation of hybrid organometallic-organic macrocyclic adducts with long chain dicarboxylic acids

The supramolecular macrocyclic adducts of general formula {[Fe(eta5-C5H4-C5H4N)2].[HOOC(CH2)nCOOH]}2 with n = 4 (adipic acid), n = 6 (suberic acid), n = 7 (azelaic acid) and n = 8 (sebacic acid) have been obtained quantitatively by kneading powdered samples of the crystalline organometallic and organic reactants with drops of MeOH (for n = 4, 6 and 7) and by direct crystallization from MeOH for n = 8, while the adduct with n = 5 represents an isomeric open chain alternative to the macrocycle.     

Atoms-in-molecules analysis of extended hypervalent five-center, six-electron (5c-6e) C(2)Z(2)O interactions at the 1,8,9-positions of anthraquinone and 9-methoxyanthracene systems

To clarify the nature of five-center, six-electron (5c-6e) C(2)Z(2)O interactions, atoms-in-molecules (AIM) analysis has been applied to an anthraquinone, 1,8-(MeZ)(2)ATQ (1 (Z=Se), 2 (Z=S), and 3 (Z=O)), and a 9-methoxyanthracene system, 9-MeO-1,8-(MeZ)(2)ATC (4 (Z=Se), 5 (Z=S), and 6 (Z=O)), as well as 1-(MeZ)ATQ (7 (Z=Se), 8 (Z=S), and 9 (Z=O)) and 9-MeO-1-(MeZ)ATC (10 (Z=Se), 11 (Z=S), and 12 (Z=O)). The total electronic energy density (H(b)(r(c))) at the bond critical points (BCPs), an appropriate index for weak interactions, has been examined for 5c-6e C(2)Z(2)O and 3c-4e CZO interactions of the n(p)(O)sigma*(Z--C) type in 1-12. Some hydrogen-bonded adducts were also re-examined for convenience of comparison. The total electronic energy densities varied in the following order: OO (3: H(b)(r(c))=0.0028 au)=OO (6: 0.0028 au)>OO (9: 0.0025 au)> or =NNHF (0.0024 au)> or =OO (12: 0.0023 au)>H(2)OHOH (0.0015 au)>SO (8: 0.0013 au)=SO (2: 0.0013 au)> or =SO (11: 0.0012 au)=SO (5: 0.0012 au)>HFHF (0.0008 au)=SeO (10: 0.0008 au)=SeO (4: 0.0008 au)> or =SeO (1: 0.0007 au)> or =SeO (7: 0.0006 au)>HCNHF (-0.0013 au). H(b)(r(c)) values for SO were predicted to be smaller than the hydrogen bond of H(2)OHOH and H(b)(r(c)) values for SeO are very close to or slightly smaller than that for HFHF in both the ATQ and 9-MeOATC systems. In the case of Z=Se and S, H(b)(r(c)) values for 5c-6e C(2)Z(2)O interactions are essentially equal to those for 3c-4e CZO if Z is the same. The results demonstrate that two n(p)(O)sigma*(Z--C) 3c-4e interactions effectively connect through the central n(p)(O) orbital to form the extended hypervalent 5c-6e system of the sigma*(C--Z)n(p)(O)sigma*(Z--C) type for Z=Se and S in both systems. Natural bond orbital (NBO) analysis revealed that n(s)(O) also contributes to some extent. The electron charge densities at the BCPs, NBO analysis, and the total energies calculated for 1-12, together with the structural changes in the PhSe derivatives, support the above discussion.     

Stability and three-dimensional aromaticity of closo-NB(n-1)H n azaboranes,n = 5-12

Computations on all the possible positional isomers of the closo-azaboranes NB(n)()(-)(1)H(n)() (n = 5-12) reveal substantial differences in the relative energies. Data at the B3LYP/6-311+G level of density functional theory (DFT) agree well with expectations based on the topological charge stabilization, with the qualitative connectivity preferences of Williams, and with the Jemmis-Schleyer six interstitial electron rules. The energetic relationship involving each of the most stable positional isomers, 1-NB(4)H(5), NB(5)H(6), 2-NB(6)H(7), 1-NB(7)H(8), 4-NB(8)H(9), 1-NB(9)H(10), 2-NB(10)H(11), NB(11)H(12), was based on the energies (DeltaH) of the model reaction: NBH(2) + (n-1)BH(increment) --> NB(n)()H(n)()(+1) (n = 4-11). This evaluation shows that the stabilities of closo-azaboranes NB(n)()(-)(1)H(n)() (n = 5-12) increase with increasing cluster size from 5 to 12 vertexes. The "three-dimensional aromaticity" of these closo-azaboranes NB(n)()(-)(1)H(n)() (n = 5-12) is demonstrated by their the nucleus-independent chemical shifts (NICS) and their magnetic susceptibilities (chi), which match one another well. However, there is no direct relationship between these magnetic properties and the relative stabilities of the positional isomers of each cluster. As expected, other energy contributions such as topological charge stabilization and connectivity can be equally important.     

Electrospun nanofibers of TiO2/CdS heteroarchitectures with enhanced photocatalytic activity by visible light

Herein, we have demonstrated that the electrospun nanofibers of TiO(2)/CdS heteroarchitectures could be fabricated through combining electrospinning technique with hydrothermal process. The configuration, crystal structure, and element composition of the as-prepared TiO(2)/CdS heteroarchitectures were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), resonant Raman spectrometer, X-ray photoelectron spectroscopy (XPS). The results indicated that the high-density hexagonal wurtzite CdS crystalline particles of ca. 6-40 nm in diameter were uniformly and closely grown on anatase TiO(2) nanofibers. Especially, the light-absorption properties as well as photocatalytic characteristics of pure TiO(2) nanofibers and TiO(2)/CdS heteroarchitectures with different amount loading of CdS were also investigated. The absorption of TiO(2)/CdS heteroarchitectures was extended to the visible due to effective immobilization of sensitizing agent CdS on TiO(2). In contrast with the pure TiO(2) nanofibers, the TiO(2)/CdS heteroarchitectures showed excellent photocatalytic activity by using rhodamine B dye as a model organic substrate under visible-light irradiation. It was worth noting that the cooperative photocatalytic mechanism of the TiO(2)/CdS heteroarchitectures was also discussed.     

Synthesis and Structure of { (Tab-Tab) [Ag2(μ-Cl)4]·2MeCN}n (Tab = 4-(Trimethylammonio)benzenethiolate)

In the presence of Et4NCl?H2O,reaction of AgCl with TabHPF6 in MeCN afforded the title complex {(Tab-Tab)[Ag2(μ-Cl)4]·2MeCN}n 1.1 crystallizes in the orthorhombic space group Pbcn with a=16.782(3),b=6.8358(14),c=26.194(5) ,V=3004.9(10) 3,Z=8,μ= 1.817 mm-1,Dc=1.711 g/cm3,T=223 K,C11H16AgCl2N2S,Mr=387.10,F(000)=1544,S=1.160,R=0.0528 and wR=0.0896 for 2732 observed reflections with I > 2σ(I).1 contains a 1D linear [Ag2Cl4]n2n-chain coupled with the [Tab-Tab]2+ dications.Intermolecular hydrogen bonding interac-tions between the protons of methyl groups from the Tab-Tab dications and the chlorides result in the formation of a 2D hydrogen-bonded network.     

Cobalt chemistry with mixed aminotroponiminate salicylaldiminate ligands: synthesis, characterization, and nitric oxide reactivity

A new class of mixed aminotroponimine salicylaldimine ligands and their corresponding cobalt(II) complexes are reported. This work expands the family of cobalt(II) aminotroponiminato complexes to include salicylaldiminate and derivatized fluorescein moieties. The H2iPrSATI-n (n = 3, 4) ligands 3 and 4, respectively, contain an aminotroponimine moiety and a salicylaldimine fragment connected with an alkyl linker. In the H2iPrFATI-n (n = 3, 4) ligands 5 and 6, a derivatized fluorescein replaces the salicylaldimine fragment. The cobalt(II) complexes [Co(iPrSATI-3)] (7) and [Co2(iPrSATI-4)(2)] (9) were prepared and structurally characterized. The reaction of NO with both complexes ultimately results in the formation of a dinitrogen-containing species. The mononitrosyl, [Co(iPrSATI-3)(NO)] (8), was isolated and characterized. The reactivity of [Co(iPrFATI-3)] (10) and [Co(iPrFATI-4)] (11) with NO mimics that observed for the salicylaldimine derivatives, as monitored by solution IR spectroscopy. When followed by fluorescence spectroscopy, reaction of 11 with NO evoked a 3-fold increase in emission intensity after 22 h.