A note on the electronic structure of O 2 −

Summary The electronic spectrum of O ₂ ^– is reinvestigated using CASSCF and CI methods. In particular, a previously noted curious flattening of theA ² _u curve has been studied in detail. The present analysis disagrees with the previous one where this flattening was found to be a result of an avoided curve crossing between a valence and a Rydberg state of O ₂ ^– . A simple procedure is suggested to determine whether a wavefunction is of real Rydberg character or if the bound character of the state is just an artefact of the calculation.     

Investigation of the relative stabilities of various allotropic phases of elemental tellurium under pressure and their interconversion paths by electronic structure calculations and crystal structure analyses

Elemental tellurium adopts a number of different structures under pressure. The relative stabilities of these allotropes and the interconversion between them were examined on the basis of first principles electronic band structure calculations with and without external pressure. The relative stabilities of the allotropes were also analyzed by estimating the overall strength of covalent bonding on the basis of the Te-Te overlap populations determined from tight-binding electronic structure calculations. The crystal structures of the allotropes were analyzed to determine how one form can transform into another form under pressure. Our study leads to the energy profile of tellurium as a function of pressure consistent with experiment, shows that the relative stabilities of the allotropic phases of Te are mainly governed by the overall strength of covalent bonding, and that all the allotropes are intimately related in structure, and one form can be readily converted to another form under pressure via a simple interconversion path.     

噻吩衍生物电子结构的DFT研究

采用B3LYP方法在6-31G^*水平上优化了12种α位取代噻吩衍生物的几何构型，采用TD-DFT方法计算了它们的前线轨道能级和电子光谱．结果表明，a，f和1分子比它们的同分异构体要稳定；噻吩衍生物与苯、吡啶相比，也具有很好的共轭性；随着分子中所连接基团数目的增多，特别是-CN的增加，分子的偶极距增大，前线轨道能级差减小，分子的最大吸收波长发生红移；对于具有相同共轭链的同分异构体，c，g，k分子的偶极距较大，而前线轨道能级差最小的分别为b，e，1分子，相应的最大吸收波长也较大．这些结论对分子设计具有重要的指导意义．     

Raman spectroscopy under high pressures and DFT calculations of the amino acid l-glutamine

l-glutamine crystal was obtained by the slow evaporation method and its crystallographic structure was verified by X-ray diffraction experiments and the Rietveld method. The vibrational modes of l-glutamine were investigated through Raman spectroscopy and the normal modes were obtained using the Density Functional Theory with the B3LYP functional and set of bases 6-31G++(d, p). With such approach, it was possible to make a theoretical-experimental comparison of the results obtained and to furnish a more precise assignment of the normal modes. The crystal was submitted to high pressure conditions and the Raman spectra between 3055 and 40 cm⁻¹ were recorded for pressures up to 6.1 GPa in a diamond anvil cell. This study allowed us to understand that the crystal undergoes a reversible structural phase transition around 4.0 GPa, characterized mainly by spectral changes in the region of the external modes.     

Hexagonal high pressure phase of copper(I)tetraiodomercurate (Cu2HgI4)

Summary Using a high pressure X-ray camera Cu₂HgI₄ was subjected at room temperature to pressures up to about 8 GPa. A hexagonal high pressure phase (a=8.28 (2) Å,c=3.40 (0) Å, space group P lm,Z=1) could be detected. This phase shows a reversible transformation with pressure hysteresis. The transition occurs at 7 GPa when the pressure is increased but at 6 GPa when the pressure is decreased.

---

Hexagonale Hochdruckphase von Kupfer(I)tetraiodomercurat (Cu₂HgI₄)

Zusammenfassung Cu₂HgI₄ wurde in einer Hochdruckkamera bei Raumtemperatur mit einem Druck bis zu 8 GPa belastet. Dabei bildete sich eine hexagonale Hochdruckmodifikation (a=8.28 (2) Å,c=3.40 (0) Å, Raumgruppe P lm,Z=1). Für diese Phase wurde eine reversible Umwandlung mit Druckhysterese festgestellt. Mit steigendem Druck findet die Umwandlung bei 7 GPa mit sinkendem Druck jedoch bei 6 GPa statt.

     

Density functional study on electronic properties of P-doped spinel silicon carbon nitride

We performed density functional calculations on the electronic properties of P-doped spinel silicon carbon nitride. When Si is replaced by C at the tetrahedral sites of P-doped c-Si₃N₄, the band gap can be adjusted, and an insulator-to-metal transition is predicted to occur at the C-to-Si ratio of 0.27. Finally, some possible examinations and potential applications for the large band-gap reduction are discussed.     

Effect of high hydrostatic pressure on structural stability of Ti3GeC2: A first-principles investigation

An investigation into the structural stability, electronic and elastic properties of Ti₃GeC₂ under high hydrostatic pressure was conducted using first-principles calculations based on density functional theory (DFT). From the energy and enthalpy calculations, and the variations of elastic constants with pressure, we conclude that α‐Ti₃GeC₂ is most stable upon compression to 100 GPa, which is not consistent with the nonhydrostatic in situ synchrotron X-ray diffraction studies. The higher structural stability was analyzed in terms of electronic level. The absence of band gap at the Fermi level and the finite value of the density of states at the Fermi energy reveal the metallic behavior of all polymorphs of Ti₃GeC₂.     

DFT study of electronic structure of saccharin,thiosaccharin, and their respective ions: Effects of metal coordination on thiosaccharinate electronic structure

A rationalization of the conspicuous different abilities of saccharin and thiosaccharin to form coordination compounds with the first series of transition metal elements and to interact with heavy metal cations is sought. Their electronic molecular structures as well as those of their respective ions are compared performing natural bond orbitals (NBO) analyses of the four species. Upon deprotonation, the negative charge at the N atom in saccharin is almost constant while it decreases in thiosaccharin and the negative charge at the monocoordinated chalcogen atom is notably more increased in the latter than in the former. Apparently, the negative charge reorganization makes difficult the coordination of thiosaccharin with the first series of transition metal elements and favors its experimentally observed interaction with heavy metal cations such as cadmium, lead, mercury, silver, and thallium. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Dependence of the lone pair of bismuth on coordination environment and pressure: An ab initio study on Cu4Bi5S10 and Bi2S3

DFT calculations have been carried out for Cu₄Bi₅S₁₀ and Bi₂S₃ to provide an analysis of the relation between electronic structure, lone electron pairs and the local geometry. The effect of pressure is considered in Bi₂S₃ and the results are compared to published experimental data. Bi³⁺ in Cu₄Bi₅S₁₀ is found at both symmetrically and asymmetrically coordinated sites, whereas the coordination environments of Bi in Bi₂S₃ are asymmetric at room conditions and get more regular with increasing pressure. The charge density maps of the asymmetric sites show the lone pairs as lobes of non-shared charge. These lobes are related to an effective Bi s-Bi p hybridization resulting from coupling to S p orbitals, supporting the modern view of the origin of the stereochemically active lone pair. No effective Bi s-p hybridization is seen for the symmetric site in Cu₄Bi₅S₁₀, whereas Bi s-p hybridization coexists with a much reduced lone pair in Bi₂S₃ at high pressure.     

Density functional study on electronic and optical properties of C (or N)-doped cubic cerium dioxide

Density functional calculations were performed on electronic and optical properties of C (or N)-doped cubic cerium dioxide (CeO₂). When O is replaced by C (or N) in CeO₂, obvious band-gap (E_g) reduction is observed. Meanwhile, it is interesting to find that the substitutional doping of C (or N) in CeO₂ obviously increases the O 2p–Ce 4f transition intensity and also the refractive index. The increase in the O 2p–Ce 4f transition intensity on going from undoped, N-doped and C-doped CeO₂ was related to the covalent character of the Ce–O bond. Compared with the undoped CeO₂, the C (or N)-doped CeO₂, with steep absorption peaks at lower energy, can be used for visible-light absorption applications.     

The electronic and molecular structure of carbon clusters: C8 and C10

Summary The equilibrium geometries of C₈ and C₁₀ have been determined from electronic structure calculations, using a variety of correlated methods and large basis sets of atomic natural orbitals. For C₈, a cyclic form withC _4h symmetry (¹ A _g) and a linear, cumulene-like form (³ _g ^– ) are isoenergetic candidates for the electronic ground state. For C₁₀, the ground-state equilibrium structure is definitely monocyclic. Three different cyclic structures have been considered here, i.e. cumulenicD _10h , distorted-cumulenicD _5h and acetylenicD _5h . These are all essentially isoenergetic, and are about 50 kcal/mol below the linear³ _g ^– state. The choice of basis sets and methods used has a strong impact on the predicted ground-state structures.Dedicated to Prof. Klaus Ruedenberg     

High pressure induced coordination evolution in chain compound Li2CuO2

Using diamond anvil cell technique with angle dispersive X-ray diffraction (ADXD) of synchrotron radiation and electrical conductivity measurements, we have observed that CuO₂ chain compound Li₂CuO₂ transforms from ambient orthorhombic symmetry into a new phase at above 5.4 GPa and room temperature. The new phase was found to be of monoclinic structure with an increased oxygen coordination number of Cu²⁺ from four at ambient to six at high pressure that provides a structural basis of the evolution of principle physical properties. The high pressure phase of Li₂CuO₂ is discussed in line with the first principle calculations.     

Structural transition of NaBH4 under high pressure: Ab initio calculations

The pressure induced structural transition of NaBH₄ from β-NaBH₄ (tetragonal-P42_1c) to γ-NaBH₄ (orthorhombic-Pnma) is investigated by ab initio plane-wave pseudopotential density functional theory method (DFT). The BaSO₄-type structure of orthorhombic high-pressure phase is testified theoretically for the first time. The calculated transition pressure of β-NaBH₄ (tetragonal-P42_1c) to γ-NaBH₄ (orthorhombic-Pnma) is 9.66 GPa and the orthorhombic high-pressure phase is stable up to 30 GPa. Our results agree well with previous experimental results and demonstrate that high-pressure phase transition from β-NaBH₄ to γ-NaBH₄ may occur at low temperature. At last, the pressure effects on the electronic structures of α-, β- and γ-NaBH₄ are discussed.     

关于限域离子液体吸附CO_2的密度泛函理论(DFT)的研究

近年来,温室效应日趋严重,因此吸收CO_2的材料受到了广泛的关注.采用了密度泛函理论(DFT)研究以SiO_2为载体的限域离子液体对CO_2的吸附.对比纯净离子液体(ILs)以及限域离子液体与CO_2的相互作用情况,在这两种状态下两种体系的吸附情况大不相同.从几何结构、相互作用以及电荷分析等方面对ILs、 SiO_2以及ILs/SiO_2复合结构进行研究.计算结果表明,载体、离子液体和CO_2之间都存在较强的相互作用.离子液体的负载不仅改变了SiO_2载体的结构,而且受载体的影响阴阳离子之间的相互作用力也发生了改变.计算结果为进一步深入限域离子液体对CO_2的吸附打下了理论基础.     

Regioselective control of the nickel-mediated coupling of acetylene and carbon dioxide - A DFT study

The nickel-mediated coupling of asymmetric alkynes with carbon dioxide is known to be highly regioselective with respect to the formation of nickelacycle intermediates and α,β-unsaturated carboxylic acid products. Using density functional theory (DFT), we have investigated the effect that parameters such as acetylene-substituent, ancillary ligand and solvent have on the potential energy surface of the nickelacycle coupling reaction. 3-R-substituted nickelacycles are the thermodynamically preferred product in all cases surveyed, however, the transition structure characterised by the attack of CO₂ on the alkyne carbon distal from the R-group is generally lower in energy, making the 2-R-substituted nickelacycle the kinetically favoured product. Ligating the zerovalent nickel species with the diazabicyclo[5.4.0]undec-7-ene (DBU) ancillary ligand in preference to 2,2′-bipyridine (BIPY) leads to lower activation energies for the coupling reaction and products that are less susceptible to steric bulk in the 2-position of the nickelacycle. Solvation with dimethylformamide (DMF) has the advantage of lowering the activation barrier for the coupling reaction when compared to tetrahydrofuran (THF).     

Mn-Na2WO4/SiO2催化剂表面活性中心结构的DFT研究

Mn Na2WO4/SiO2 is one of the best catalysts for oxidative coupling of methane.To investigate the nature of active centers and the reaction mechanism,the structure of possible metal sites formed by tungsten and manganese over the silica surface were studied using molecular simulation method and ab initio DFT calculations.Silica support exists in the catalyst as 岐瞔ristobalite and its (111) face exposes preferentially to the surface.The calculated results show that tungsten interacts with the silica surface by three or one bridge oxygen atoms to form tetrahedral [WO4],and manganese interacts with single bridge oxygen to form dispersed [MnO4] or exists as oxide clusters.The nature of the molecular orbitals and the electronic structure suggest that the tetrahedral [WO4] site with single bridge oxygen is the most probable active center responsible for methane activation.     

High pressure Raman scattering study on the phase stability of LuVO4

High pressure Raman spectroscopic investigations have been carried out on rare earth orthovanadate LuVO₄ upto 26 GPa. Changes in the Raman spectrum around 8 GPa across the reported zircon to scheelite transition are investigated in detail and compared with those observed in other vanadates. Co-existence of the zircon and scheelite phases is observed over a pressure range of about 8-13 GPa. The zircon to scheelite transition is irreversible upon pressure release. Subtle changes are observed in the Raman spectrum above 16 GPa which could be related to scheelite ↔ fergusonite transition. Pressure dependencies of the Raman active modes in the zircon and the scheelite phases are reported.     

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

The search for alternative materials with high dye adsorption capacity, such as methylene blue (MB), remains the focus of current studies. This computational study focuses on oxides ZnTiO₃ and TiO₂ (anatase phase) and on their adsorptive properties. Computational calculations based on DFT methods were performed using the Viena Ab initio Simulation Package (VASP) code to study the electronic properties of these oxides. The bandgap energy values calculated by the Hubbard U (GGA + U) method for ZnTiO₃ and TiO₂ were 3.17 and 3.21 eV, respectively, which are consistent with the experimental data. The most favorable orientation of the MB adsorbed on the surface (101) of both oxides is semi-perpendicular. Stronger adsorption was observed on the ZnTiO₃ surface (−282.05 kJ/mol) than on TiO₂ (–10.95 kJ/mol). Anchoring of the MB molecule on both surfaces was carried out by means of two protons in a bidentate chelating (BC) adsorption model. The high adsorption energy of the MB dye on the ZnTiO₃ surface shows the potential value of using this mixed oxide as a dye adsorbent for several technological and environmental applications.     

密度泛函理论研究NO在CuCr2O4(100)表面的吸附

运用密度泛函理论研究了NO在CuCr₂O₄(100)表面4个可能吸附位的顶位吸附。结果表明:表面铜(Cu)和铬(Cr)为活性吸附位，吸附能分别为98.1 kJ·mol^-1和92.9 kJ·mol^-1。对活性吸附位Cu位和Cr位考虑了NO以N端和O端2种吸附取向的吸附，发现N端吸附比O端吸附更为有利，O端吸附为简单的物理吸附。在2种吸附取向情况下，N-O键的伸缩振动频率都发生了红移。Mulliken布居分析表明，N端吸附时NO分子失去电子;对NO吸附前后的态密度分析可知，对Cu位和Cr位N端吸附NO的2π轨道得到电子。本文并进一步讨论了NO分子在CuCr₂O₄ (100)表面Cu位和Cr位的成键机理。     

Structural and electronic properties of CenO2n (n = 1-5) nanoparticles: A computational study

Understanding the electronic structures and properties of different size CeO₂ nanoparticles is very important for further application in the field of catalysis used in several promising materials. In this study, we have elucidated the electronic analyses of (CeO₂)_n (n = 1-5) nanoparticles through first-principle density-functional theory approach. All structures with the global minimal energies are obtained by fire algorithm combining simulated annealing method and then are further re-optimized by DMol³ program with double numerical atomic basis sets. Two useful analyzed methods (Fukui function and electronic density of state) are calculated to explain the chemical reactivity of different sites for (CeO₂)_n (n = 1-5) nanoparticles.