α-二亚胺钴配合物催化1,3-丁二烯高活性与高顺式-1,4选择性聚合

合成了一系列α-二亚胺钴配合物[ArN=C(Me)-(Me)C=NAr]CoCl₂(Ar=C₆H₅, 3a; 4-MeC₆H₄, 3b; 4-MeOC₆H₄, 3c; 4-FC₆H₄, 3d; 4-ClC₆H₄, 3e; 2-MeC₆H₄, 3f; 2-EtC₆H₄, 3g; 2-ⁱPrC₆H₄, 3h; 2,4,6-Me₃C₆H₂, 3i; 2,6-Et₂C₆H₃, 3j; 2,6-ⁱPrC₆H₃, 3k)和作为对比的吡啶双亚胺二氯化钴配合物(4a), 并用X射线单晶衍射方法研究了配合物3i, 3k和4a的分子结构. α-二亚胺钴配合物在倍半乙基氯化铝的作用下对丁二烯聚合有较高的催化活性,得到的顺式-1,4结构含量达98%,且有较高分子量(M_n≈1×10⁴-1×10⁵)的聚丁二烯. 配体的电子效应影响催化剂的活性及顺式-1,4选择性, 而配体的空间位阻对丁二烯聚合几乎没有影响. 详细研究了聚合时间、聚合温度、烷基铝助催化剂及铝比等条件对丁二烯聚合行为的影响.     

Polymerization of 1,3-Butadiene Catalyzed by Cobalt(Ⅱ) and Nickel(Ⅱ) Complexes Bearing Pyridine-2-imidate Ligands

Cobalt and nickel complexes (1a-1d and 2a-2d, respectively) supported by 2-imidate-pyridine ligands were synthesized and used for 1,3-butadiene polymerization. The complexes were characterized by IR and element analysis, and complex 1a was further characterized by single-crystal X-ray diffraction. The solid state structure of complex 1a displayed a distorted tetrahedral geometry. Upon activation with ethylaluminum sesquichloride (EASC), all the complexes showed high activities toward 1,3-butadiene polymerization. The cobalt complexes produced polymers with high cis-1,4 contents and high molecular weights, while the nickel complexes displayed low cis-1,4 selectivity and the resulting polymers had low molecular weights. The catalytic activities of the complexes highly depended on the ligand structure. With the increment of polymerization temperature, the cis-1,4 content and the molecular weight of the resulting polymer decreased.     

Living polymerization of 1,3-butadiene catalyzed by half-titanocene complex bearing dibenzhydryl-substituted aryloxide ligand

Half-titanocene complexes bearing dibenzhydryl-substituted aryloxide ligands(2a-2d) were prepared. Among them, 2c adopted a three-legged distorted tetrahedral geometry evidenced by X-ray crystallography. The poly-1,3-butadiene with high molecular weight and narrow molecular weight distribution was obtained by using these complexes as the catalysts activated with methylaluminoxane(MAO). The catalytic activities of the complexes depended on their structures. The Ti―O―C bond in the complexes with large angle afforded them with higher activity, while Cp*-based complexes exhibited lower activities than the Cp-based analogues. The activity of complex increased with increasing the polymerization temperature while the selectivity remained no change, indicating the high thermal stability. Furthermore, the polymerization of 1,3-butadiene catalyzed by 2a/MAO at 0 °C has been found in a living fashion.     

Linear codimerization of 2-cyclopropyl-1,3-butadiene with methyl acrylate catalyzed by iron and cobalt complexes

Conclusions The linear codimerization of 2-cyclopropyl-1,3-butadiene with methyl acrylate gave a mixture of methyl esters of 5-cyclopropyl-2Z,5Z- and 2E,5Z-heptadienoic acids.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2364–2366, October, 1984.     

Reductive desymmetrization of 2-alkyl-1,3-diketones catalyzed by optically active beta-ketoiminato cobalt complexes

[reaction: see text] The reductive desymmetrization of acyclic 1,3-diketones was achieved for the first time by catalytic borohydride reduction in the presence of optically active beta-ketoiminato cobalt(II) complex catalysts. In this reaction, various 2-substituted-1,3-diaryl-1,3-propanediones were converted into the corresponding optically active 2-substituted-1,3-diaryl-3-hydroxypropanone in good-to-high yields with excellent diastereo- and enantioselectivities and high catalytic efficiencies.     

Enantioselective 1,3-dipolar cycloaddition of nitrones catalyzed by optically active cationic cobalt(III) complexes

[reaction: see text] The optically active beta-ketoiminato cationic cobalt(III) complexes were employed as efficient Lewis acid catalysts for the enantioselective 1,3-dipolar cycloaddition reaction of alpha,beta-unsaturated aldehydes with nitrones. Excellent endo selectivities and high enantioselectivities were achieved in the cycloaddition reaction of 1-cyclopentene-1-carbaldehyde and the nitrones derived from 2-halobenzaldehyde.     

Polymerization and copolymerization of 2-phthalimidomethyll 1,3-butadiene. II. Kinetic study of the polymerization of 1,3-butadiene and of the copolymerization of 1,3-butadiene with 2-phthalimidomethyl 1,3-butadiene initiated by bis-(η3-allyl nickel trifluoroacetate)

The kinetics of the polymerization of 1,3-butadiene initiated by bis(η³-allyl nickel trifluoroacetate) prepared in benzene was studied in methylene chloride at 40°C. The reaction is first order with respect to the monomer, second order with respect to the catalyst in contrast to the case in which solvent is benzene. We have shown that the presence of a polar molecule (fe, N-methyl phthalimide) decreases the overall rate of polymerization. The apparent reactivity ratios for the system 2-phthalimidomethyl 1,3-butadiene (1)-1,3-butadiene (2) are r₁ = 0.65 ± 0.006 and r₂ = 0.48 ± 0.015.     

Highly enantioselective and diastereoselective 1,3-dipolar cycloaddition reactions between azomethine imines and 3-acryloyl-2-oxazolidinone catalyzed by binaphthyldiimine-Ni(II) complexes

[reaction: see text] We have found the first example of high levels of asymmetric induction (97-74% ee) along with high diastereoselectivity (>99:1-64:36) in dipole-HOMO-/dipolarophile-LUMO-controlled asymmetric 1,3-dipolar cycloaddition reactions between fused azomethine imines and 3-acryloyl-2-oxazolidinone using a chiral BINIM-Ni(II) complex as a chiral Lewis acid catalyst.     

Synthesis, characterization and butadiene polymerization studies of cobalt(II) complexes bearing bisiminopyridine ligand

A series of 2,6-bis(imino)pyridyl Co(II) complexes of the general formulas [2,6-(ArNCMe)₂C₅H₃N]CoCl₂ (Ar = -C₆H₅, 3a; 2-MeC₆H₄, 3b; 2-EtC₆H₄, 3c; 2-ⁱPrC₆H₄, 3d; 2,6-ⁱPr₂C₆H₃, 3e; 4-ⁱPrC₆H₄, 3f; 4-FC₆H₄, 3g; 4-CF₃C₆H₄, 3h; 2-FC₆H₄, 3i; 2,6-F₂C₆H₃, 3j; 2-Me-4-FC₆H₃, 3k and 2,6-Me₂-4-FC₆H₂, 3l) and [2,6-(ArNCH)₂C₅H₃N]CoCl₂ (Ar = -C₆H₅, 3m; 2-EtC₆H₄, 3n and 4-ⁱPrC₆H₄, 3o) have been synthesized and characterized. The structures of new complexes 3a, 3f-3h and 3m-3o are further confirmed by X-ray crystallography. All complexes adopt distorted trigonal bipyramidal configuration with the equatorial plane formed by the pyridyl nitrogen atoms and the two chlorine atoms. In the complexes 3m and 3o, three aromatic rings are essentially coplanar, which is in sharp contrast to the other complexes, where three rings are almost orthogonal to each other. With methylaluminoxane (MAO) as cocatalyst in toluene at room temperature, the complexes show moderate to high conversion (42-99%) in butadiene polymerization, producing polybutadiene with tunable cis-1,4 structure (77.5-97%) and controllable molecular weight and molecular weight distribution. The catalytic activity, selectivity as well as the molecular weight and molecular weight distribution of the resultant polymer are found to be dependent on the size and nature of substituents on iminoaryl rings and their positions located. By deliberately tuning the ligand structure, more efficient catalyst in terms of high activity and high selectivity can be obtained.     

eta 6-Arene complexes of Ni(II), efficient catalysts for 1,3-butadiene and styrene polymerization

A simple procedure for the preparation of cationic arene complexes of Ni(II) of composition [Ni(eta 6-ArX)(eta 3-C3H5)]+[BAr'4]- (X = OH, H) is reported. These compounds are shown to behave as highly active catalysts for the polymerization of 1,3-butadiene and styrene.     

Mixed alkyl isocyanide-1,4-diaza-1,3-butadiene complexes of molybdenum(II) and tungsten(II)

The reactions of M(CO)₄(R′-DAB) (M = Mo) or W; R′-DAB = R′-N=CHCH=NR′ (R′ = i-propyl, t-butyl, or cyclohexyl) with SnCl₄ in dichloromethane solution result in the formation, in high yield, of the orange, diamagnetic, seven-coordinate oxidative-addition products M(CO)₃(R′-DAB)(SnCl₃)Cl. The reactions of Mo(CO)₃(R′-DAB)(SnCl₃)Cl (R′ = i-Pr or Cy) with an excess of alkyl isocyanide RNC (R = CHMe₂, CMe₃, or C₆H₁₁) in the presence of KPF₆ lead to the formation of [Mo(CNR)₄(R′-DAB)Cl]PF₆ or [Mo(CNR)₅(R′-DAB)](PF₆)₂ depending upon the reaction stoichiometry and reaction conditions. The monocationic chloro species are converted to [Mo(CNR)₅(R′-DAB)](PF₆)₂ upon reflux with the stoichiometric amount of RNC. Under similar reactions conditions M(CO)₃(t-Bu-DAB)(SnCl₃)Cl (M = Mo or W) derivatives react with alkyl isocyanides with the reductive-elimination of the elements of SnCl₄ and the formation of octahedral M(CO)₃(CNR)(t-Bu-DAB). The dark red compounds [Mo(CNCMe₃)₅(R′-DAB)](PF₆)₂ (R′ = i-Pr or Cy) react readily with cyanide ions at ambient temperatures in methanol to yield [Mo(CNCMe₃)₄(R′-DAB)(CN)]PF₆. Attempts to thermally dealkylate the parent complexes [Mo(CNCMe₃)₅(R′-DAB)](PF₆)₂ (R′ = i-Pr or Cy) to these same cyano species were unsuccessful.     

New thermally stable cationic eta3-allyl(1,4-diphospha-(1,3)-butadiene)nickel complexes for ethylene polymerization

Nickel ethylene polymerization catalysts 1a,b bearing a P,P-ligand with two sp2-hybridized phosphorus atoms have been synthesized; their structure and polymerization studies have been reported for the first time.     

Hydroxo-bridged dinuclear cobalt(II) complexes of OBISDIEN and OBISTREN as oxygen carriers

Abstract

The hydroxo-bridged dinuclear cobalt(II) complexes of the macro-cyclic and macrobicyclic dinucleating ligands OBISDIEN and OBISTREN form thermodynamically stable dioxygen adducts. Although the values of the oxygenation constants of cobalt complexes usually increase with an increase in the number of basic amino groups coordinated to the cobalt centers, these complexes are unusual in that the oxygenation constants of the complex formed from OBISDIEN is about three orders of magnitude higher than the analogous complex formed from OBISTREN. The difference in behavior must be due to differences in steric strain. Since crystal structures are not available, steric effects were estimated by the use of molecular mechanics. By application of the molecular modelling program SYBYL it was determined that the distortions of the cryptand ligand necessary to form the hydroxo-bridged dioxygen complex are much greater and more energetic than those of the macrocyclic ligand. Both ligands were found to form excellent oxygen carriers because of facile oxygenation-deoxygenation reactions of their dinuclear cobalt complexes, and because of almost immeasurably slow metal-centered degradation. Moreover, the ligands were not changed during degradation, so that the oxygen-carrying complexes could be easily regenerated by electrolytic reduction.     

Highly syndiospecific polymerization of styrene catalyzed by allyl lanthanide complexes

Allylic complexes of lanthanides bearing a fluorenyl-based ligand are active single-component catalysts for the polymerization of styrene, giving highly syndiotactic polymers (rrrr > 99%) with low to high molecular weight (Mn = 8000-135 000) and narrow polydispersities (Mw/Mn = 1.25-2.1).     

Asymmetric cyclizations of some chlorohydrins catalyzed by optically active cobalt (salen) type complexes

Optically active chloromethyloxirane was obtained from 1,3-dichloro-2-propanol by a process of asymmetric synthesis. The highest enantiomenc excess (e. e. ) of chloromethyloxirane that could be obtained was 67%, using Co(II) (3,5-Cl,Cl-sal)₂(S-CHXDA) and K₂CO₃ as the catalyst and base, respectively. For purpose of comparison, asymmetric cyclizations of racemic 2,3-dichloro-1-propanol and 2-chloro-1-propanol were examined; optically active chloromethyloxirane and methyloxirane were obtained according to kinetic resolution mechanisms, although the optical purities of oxiranes formed were not so high. The mechanisms for the asymmetric reactions were investigated by circular dichroism and absorption spectroscopies. It was found that the cobalt (salen) type complex forms a new complex with alkali metal carbonate, similarly to the function of crown ether. The substrate interacts with the newly formed chiral complex, followed by cylization to give optically active oxiranes.     

Syndiospecific polymerization of styrene catalyzed by CpTiCl2(OR) complexes

Five new CpTiCl₂(OR) alkoxyl-substituted half-sandwich complexes, where R was methoxyethyl ( 1 ), methoxypropyl ( 2 ), methoxyisopropyl ( 3 ), o-methoxyphenyl ( 4 ), or tetrahydrofurfuryl ( 5 ), were synthesized, characterized, and tested as catalyst precursors for the syndiospecific polymerization of styrene. These precursors were more active than (η⁵-cyclopentadienyl)trichlorotitanium (CpTiCl₃). The different structures of the alkoxyl ligands affected the activity slightly. When the polymerization was carried out in bulk, all the complexes ( 1–5 ) exhibited high activities, even at the low molar ratio of Al/Ti = 300. The syndiotactic polystyrene (s-PS) percentage of the polymer produced by alkoxyl-substituted complexes was much higher than that of CpTiCl₃. The really active center might be described as [CpTiMe]⁺ · [MAOX]⁻ · nMAO (where MAO is methylaluminoxane). The normal active species [CpTiMe]⁺ made up the core and the anion mass [MAOX]⁻ · nMAO surrounded the core and constituted the outer shell circumstance. They activated the syndiospecific polymerization of styrene as a whole. For a high concentration of MAO, the function of the alkoxyl group was weak because of the limited proportion in the outer shell. For a low concentration of MAO, the proportion of alkoxyl ligands in the outer shell increased greatly, and their influence also became significant, as reflected in a higher s-PS percentage of the obtained polymer. The existence of the additional oxygen atom in the alkoxyl ligand stabilized the active species more effectively; this was reflected in the higher temperature of the maximum activities. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1817–1824, 2001     

Highly efficient, regioselective, and stereospecific oxidation of aliphatic C-h groups with h(2)o(2), catalyzed by aminopyridine manganese complexes

Aminopyridine manganese complexes [LMn(II)(OTf)(2)] having a similar coordination topology catalyze the oxidation of unactivated aliphatic C-H groups with H(2)O(2), demonstrating excellent efficiency (up to TON = 970), site selectivity, and stereospecificity (up to >99%).     

Highly enantioselective nitrone cycloadditions with 2-alkenoyl pyridine N-oxides catalyzed by Cu(II)-BOX complexes

Enantioselective nitrone cycloadditions with 2-alkenoyl pyridine N-oxides as dipolarophiles have been reported. The reaction is catalyzed by Cu(II)-BOX complexes to give the expected isoxazolidine products with high diastereo- and enantioselectivity.