硒代胱氨酸修饰银电极及应用研究

介绍了硒代胱氨酸修饰银电极的制备及其电化学特性 ,并将该修饰电极用于痕量金属离子的分析。研究结果表明 ,此修饰电极具有良好的电化学性质和化学、机械和电化学的稳定性 ,在测定Pb2 + 时 ,检出限可达到 1.0× 10 - 11mol·L- 1,线性范围在 2 .0× 10 - 10 ～ 4 .0× 10 - 11mol·L- 1,同时对于其他金属离子 (Cd2 + ,Cu2 + ,Zn2 + )的分析中也获得较满意的结果     

L-半胱氨酸自组装膜修饰电极对对氨基酚电催化氧化及其分析应用

在裸金电极上制备了L 半胱氨酸自组装膜修饰电极(L Cys/AuSAMs),研究了对氨基酚(p AP)在L Cys/AuSAMs上的电化学行为,发现该膜电极对p AP的氧化具有良好的电催化作用。氧化峰电位降低了128mV,测得p AP的扩散系数D为1.27×10-6cm2·s-1,初步探讨了电催化机理。采用水平衰减全反射 傅立叶变换红外光谱(ATR FTIR)技术对L Cys/AuSAMs进行了表征;方波伏安法(SquareWaveVoltammetry,SWV)测定p AP,其氧化峰峰电流与p AP浓度在1.0×10-8～8.0×10-8mol·L-1和1.0×10-7～2.0×10-4mol·L-1范围内呈线性关系,相关系数分别为0.9978和0.9977,检出限为2.0×10-9mol·L-1。该电极用于模拟废水样的测定,结果满意。     

多壁碳纳米管修饰玻碳电极测定多巴酚丁胺的研究

研究了多巴酚丁胺在多壁碳纳米管修饰电极上的电化学行为,建立了一种直接测定多巴酚丁胺的电化学方法。在0.3mol·L-1H2SO4底液中,氧化峰电位为0.57V(vs.Ag/AgCl),峰电流与多巴酚丁胺的浓度在5.0×10-8～1.0×10-5mol·L-1范围内呈良好的线性关系。该法的检出限为3.0×10-8mol·L-1。平均回收率为99.15%。1.0×10-5mol·L-1多巴酚丁胺平行测定8次的标准偏差为4.8%。用拟定的方法测定了多巴酚丁胺注射液中多巴酚丁胺的含量,结果满意。     

聚L-苏氨酸修饰电极对多巴胺和肾上腺素的电催化氧化

利用循环伏安法将L-苏氨酸聚合修饰在玻碳电极表面, 制成聚L-苏氨酸修饰电极. 实验表明, 该电极对多巴胺和肾上腺素都有较好的催化氧化效果. 运用循环伏安法详细研究了修饰电极的电化学性质. 在pH 2.5的磷酸盐缓冲溶液(PBS)中, 肾上腺素的电子传递系数为0.51, 表观反应速率常数为1.33 s-1; 在pH 7.5的PBS中, 多巴胺在电极上产生一对氧化还原峰, 多巴胺在电极上的电子传递系数为0.60, 表观反应速率常数为0.92 s-1. 该修饰电极对多巴胺和肾上腺素能够进行同时测定, 还原峰电流与多巴胺和肾上腺素浓度分别在1.0×10-6-5.0×10-4 mol·L-1和3.0×10-6-1.0×10-4 mol·L-1范围内呈现良好的线性关系.     

磷钼钒杂多酸-聚吡咯膜修饰电极测定污水中亚硝酸根离子

采用电化学方法在导电基体玻碳电极上制备出磷钼钒杂多酸-聚吡咯膜修饰电极,研究了NO-2在该电极上的电化学行为。结果表明,磷钼钒杂多酸-聚吡咯膜修饰电极对酸性水溶液中的NO-2具有良好的电催化还原作用,与空白玻碳电极相比。降低过电位1000mV以上,而且N0-2的浓度在5.0×10-6～1.0×10-2mol·L-1范围内,催化峰电流与NO-2浓度呈良好的线性关系,检出限可达1.0×10-6mol·L-1,用于环境水中NO-2的测定,结果良好。     

辣根过氧化氢酶电极的研究

以辣根过氧化氢酶修饰电极采用循环伏安法对环境污染物对对苯二酚进行了测定 ,对测定条件进行了探索 ,该电极在 p H7,H2 O2 浓度为 1 0μmol· L-1时对苯二酚具有良好的响应 ,其线性范围为 2 .0× 1 0 -5～ 2 .8× 1 0 -3mol·L-1,检测下限为 1 .0× 1 0 -6mol· L-1。电极的峰电流与扫描速度的平方根成正比 ,电极上的传质过程受扩散控制 ,对酶催化反应的动力学机制进行了探讨。     

生物传感器的研究.V.尿素—石竹花组结电极的研究

尿素—石竹花组织电极是一种植物组织传感器。文中叙述了一种完整石竹花瓣的固定新方法,改善了此类生物传感器的性能:线性范围7.6×10~(-(?))～1.0×10~(-3)mol·L~(-1),斜率47mv·decade~(-1),检测上下限分别为3.2×10~(-3)mol·L~(-1)和4.6×10~(-6)mol·L~(-1),响应时间15～20min,寿命14天.该电极已初步用于实际样品的测定,结果与凯氏法吻合。对尿素含量为3.0×10~(-4)mol·L~(-1)的样品,本法分析结果偏差≤0.2×10~(-4)mol·L~(-1),平均回收率为101.5%(M=3,n=3),表明该传感器具有一定的实用价值。     

四氯络汞(Ⅱ)离子电极的研制及其应用研究

以十六烷基双硫腙·四氯络汞 (Ⅱ )为载体 ,制备了PVC膜四氯络汞 (Ⅱ )阴离子选择性电极 ;测定了40多种金属离子以及阴离子的选择性 ,除Sn(Ⅳ)、Sb(Ⅲ )稍有干扰外 ,其它金属离子均无明显的干扰 ;25℃时 ,1mol·L-1 NaCl-1×10-3 mol·L-1HCl溶液中 ,汞(Ⅱ)浓度在6×10-6～1.0×10-2 mol·L-1 呈线性响应 ,斜率为31±2mV/decade,检出限为4×10 -6mol·L -1;用电位法测得汞在蔬菜中的回收率为92.5%～97.2 % ,相对标准偏差在0.8 %～1.6 %范围 ;该法用于绿萍、莴笋、丝瓜等中微量汞的含量测定 ,结果令人满意。     

2-羟基-3-(三乙胺基)丙基十烷基硫醚修饰电极测定痕量金

研究了 2 羟基 3 (三乙胺基 )丙基十烷基硫醚 (HTPSD)修饰玻碳电极测定金的伏安特性及分析条件。在 0 .2mol·L- 1KCl HCl缓冲溶液中 (pH 1) ,金 (Ⅲ )被富集到电极表面 ,然后介质交换到 0 .2mol·L- 1KCl HCl空白溶液中 (pH 1)进行阴极溶出伏安测定 ,金 (Ⅲ )浓度在 2× 10 - 81× 10 - 6mol·L- 1范围内呈线性关系。检出限为 1× 10 - 8mol·L- 1。相对标准偏差小于 6 2 % ,一般常见离子不干扰。     

肌红蛋白在磷脂-月桂酸修饰的玻碳电极上的电化学行为及其分析应用

报道了肌红蛋白(Mb)在磷脂、月桂酸修饰的玻碳电极上的电化学行为 ,在 +0.2～ -0.7V(vs.Ag/AgCl)电位范围内 ,于pH6.0的0.01mol·L-1的KH2PO4、Na2HPO4底液中 ,肌红蛋白产生不可逆的还原电流峰 ;还原峰电流与肌红蛋白浓度在2.25×10-8 ～1.40×10-6 mol·L-1 范围内呈良好线性关系 ;线性回归方程为Ip(μA)=-0.01419 +0.2382cMb(10 -7mol·L -1) ,线性回归系数r(10)为0.998 ,检出限为1.20×10 -8mol·L -1,该电极可作为检测肌红蛋白的新型的高灵敏度电化学生物传感器。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.