Density matrix analysis, simulation, and measurements of electronic absorption and fluorescence spectra of spirobifluorenes

The linear absorption and fluorescence spectra as well as the oscillator strengths of 2,2',7,7'-tetraphenyl-9,9'-spirobifluorene (A), 2,2',7,7'-tetrakis(biphenyl-4-yl)-9,9'-spirobifluorene (B), and 2,2',7,7'-tetrakis(9,9'-spirobifluoren-2-yl)-9,9'-spirobifluorene (C) are calculated on the basis of the collective electronic oscillator (CEO) approach of Mukamel et al. (see, e.g., Chem. Rev. 2002, 102, 3171). The graphical visualization and quantitative characterization of CEO modes allows one to extract the real-space distribution of electronic excitations of the molecules under study. Effects of the lengthening and branching of the oligophenylene segments have been analyzed. The influence of the lowest excited (S1) vs ground-state (S0) geometry changes on the CEO modes is investigated and related to the geometry changes of the molecular parts. The obtained theoretical results are in good agreement with experimental trends observed in absorption and fluorescence data.     

Bidirectional racemic synthesis of the biologically active quinone cardinalin 3

Readily available 2,2',6,6'-tetramethoxy-1,1'-biphenyl was transformed in 14 synthetic steps into the natural product cardinalin 3 using a bidirectional approach. One of the key steps was the formation of the cis-1,3-dimethylnaphtho[2,3-c]pyran ring. (+/-)-1,1'-[6,6'-Diallyl-5,5'-bis(benzyloxy)-1,1',3,3'-tetramethoxy-2,2'-binaphthalene-7,7'-diyl]diethanol was treated with O(2) in the presence of CuCl(2) and catalytic PdCl(2) to afford 5,5'-bis(benzyloxy)-7,7',9,9'-tetramethoxy-1,1',3,3'-tetramethyl-1H,1'H-8,8'-bibenzo[g]isochromene. Hydrogenation of this compound afforded 7,7',9,9'-tetramethoxy-cis-1,3-cis-1',3'-tetramethyl-3,3',4,4'-tetrahydro-1H,1'H-8,8'-bibenzo[g]isochromene-5,5'-diol in quantitative yield, which was converted in 3 steps to cardinalin 3.     

Efficient greenish blue electrochemiluminescence from fluorene and spirobifluorene derivatives

The spectroscopic and electrochemical behavior as well as electrogenerated chemiluminescence (ECL) of a series of donor-π-donor derivatives bearing triphenylamine groups as donor connected to a fluorene, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-dimethylfluorene (1), or spirobifluorene core, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (2) and 2,2',7,7'-tetrakis(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (3), were investigated. Besides a high photoluminescence (PL) quantum yield in solution (between 81 and 87%), an efficient radical ions annihilation process induces intense greenish blue ECL emission that could be seen with the naked eye. Only the tetrasubstituted spirobifluorene derivative (compound 3) shows weak ECL obtained by a direct annihilation mechanism. Because the energy of the annihilation reaction is higher than the energy required to form the singlet excited state, the S-route could be considered the pathway followed by the ECL process in these molecules. The ECL emissions recorded by direct ion-ion annihilation show two bands compared to the single structureless PL band. The ECL spectra obtained by a coreactant approach using benzoylperoxide as a coreagent show no differences relative to that produced by annihilation, except for an increasing of ECL intensity for all compounds.     

New approaches towards the synthesis and characterization of alkoxy substituted spirobifluorenes and spirosilabifluorenes for organic optoelectronics

Alkoxy substituted spirobifluorene derivatives namely 2,2′,7,7′-tetrabromo-3,6-bis(methoxy)-9,9′spirobifluorene (MSBF), 2,2′,7,7′-tetrabromo-3,6-bis(ethoxy)-9,9′spirobifluorene (ESBF), 2,2′,7,7′-tetrabromo-3,6-bis(butoxy)-9,9′spirobifluorene (BSBF), 2,2′,7,7′-tetrabromo-3,3′,6,6′-tetra(methoxy)-9,9′-spiro-9-silabifluorene (MSSiBF) and their key intermediates have been synthesised successfully. All compounds have been fully characterised by ¹H and ¹³C NMR, FTIR, UV-visible spectroscopy, MS spectrometry. TGA analysis revealed good thermal stability. The systematic investigation on the solubility, thermostability and photophysical property of synthesized compound showed that alkoxy substituted spirobifluorene were unique in rigidity and have wide range of applications in molecular electronics and can be used as building units for optoelectronics material.     

Theoretical study of the transfer integral and density of states in spiro-linked triphenylamine derivatives

We present a method for calculating the parameters that control hopping transport in disordered molecular solids, i.e., the transfer integrals and the distribution of transport site energies. Average values of these parameters are obtained by performing quantum-chemical calculations on a large ensemble of bimolecular complexes in random relative orientations. The method is applied to triphenylamine (TPA) and three differently substituted spiro-linked phenylamine compounds, 2,2',7,7'-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-MeOTAD), 2,2'7,7'-tetrakis-(N,N-diphenylhenylamino)-9,9'-spirobifluorene (spiro-TAD), and 2,2',7,7'-tetrakis-(N,N-di-m-methylphenylamino)-9,9'-spirobifluorene (spiro-m-TTB). In the case of TPA, the dependence of the root-mean-square hole transfer integral J on intermolecular separation r for the ensemble of relative orientations is compared with that obtained by performing the same calculations for a fixed, approximately cofacial, orientation of the two TPA molecules. The calculation for the disordered geometry predicts a larger localization radius r0, where J approximately exp(-r/r0), than the calculation for the fixed orientation and is in better agreement with experiment. In the case of the spiro-linked compounds, results from our method are compared with parameters extracted from time-of-flight mobility measurements analyzed with the Gaussian disorder model (GDM). We find that the highest occupied molecular-orbital (HOMO) energies of the bimolecular complexes are distributed on an asymmetric peak, whose width varies in qualitative agreement with the value of the energetic disorder sigma obtained from experimental data using the GDM. The mean-square hole transfer integral varies in accordance with the experimentally determined value of the mobility prefactor micro0. The differences between the differently substituted compounds are interpreted in terms of differences in the spatial extent of the wave function. Spiro-MeOTAD was found to have a greater localization radius, which leads to both a larger transfer integral and a broader distribution of HOMO energies than either of the other compounds. For these compounds, differences in energetic disorder could not be explained in terms of differences in the permanent dipole moment. Our method is proposed as an approximate means of predicting the effect of chemical structure on the values of transport parameters in disordered molecular films.     

Highly fluorescent solid-state asymmetric spirosilabifluorene derivatives

A series of four asymmetrically aryl-substituted 9,9'-spiro-9-silabifluorene (SSF) derivatives, 2,2'-di-tert-butyl-7,7'-diphenyl-9,9'-spiro-9-silabifluorene (PhSSF), 2,2'-di-tert-butyl-7,7'-dipyridin-2-yl-9,9'-spiro-9-silabifluorene (PySSF), 2,2'-di-tert-butyl-7,7'-dibiphenyl-4-yl-9,9'-spiro-9-silabifluorene (BPhSSF), and 2,2'-di-tert-butyl-7,7'-bis(2',2' '-bipyridin-6-yl)-9,9'-spiro-9-silabifluorene (BPySSF) are prepared through the cyclization of the corresponding 2,2'-dilithiobiphenyls with silicon tetrachloride. These novel spiro-linked silacyclopentadienes (siloles) form transparent and stable amorphous films with relatively high glass transition temperatures (T(g) = 203-228 degrees C). The absorbance spectrum of each compound shows a significant bathochromic shift relative to that of the corresponding carbon analogue as a result of the effective sigma-pi conjugation between the sigma orbital of the exocyclic Si-C bond and the pi orbital of the oligoarylene fragment. Solid-state films exhibit intense violet-blue emission (lambda(PL) = 398-415 nm) with high absolute photoluminescence quantum yields (phi(PL) = 30-55%).     

Antimicrobial and antispasmodic tetrahydroanthracenes from Cassia singueana

Four tetrahydroanthracene derivatives with antimicrobial and antispasmodic activities have been isolated from Cassia singueana. The evidence described in the following indicates them to be torosachrysone (1), germichrysone (4), and two new dimeric tetrahydroanthracenes, singueanol-I (7) or 6,6′-dimethoxy-3, 3′,8,8′,9,9′-hexahydroxy-3,3′,7,7′-tetramethyl-3,3′,4,4′-tetrahydro(10,10′-bianthracen)-1,1′(2H,2′H)-dione, and singueanol-II (8) or 6,6′-dimethoxy-3,3′,8,8′,9,9′-hexahydroxy-3,3′,7,7′-tetramethyl-3,3′,4,4′-tetrahydro(5,10′-bianthracen)- 1′(2H,2′H)-dione.     

Phosphorescent sensitized fluorescent solid-state near-infrared light-emitting electrochemical cells

We report phosphorescent sensitized fluorescent near-infrared (NIR) light-emitting electrochemical cells (LECs) utilizing a phosphorescent cationic transition metal complex [Ir(ppy)(2)(dasb)](+)(PF(6)(-)) (where ppy is 2-phenylpyridine and dasb is 4,5-diaza-9,9'-spirobifluorene) as the host and two fluorescent ionic NIR emitting dyes 3,3'-diethyl-2,2'-oxathiacarbocyanine iodide (DOTCI) and 3,3'-diethylthiatricarbocyanine iodide (DTTCI) as the guests. Photoluminescence measurements show that the host-guest films containing low guest concentrations effectively quench host emission due to efficient host-guest energy transfer. Electroluminescence (EL) measurements reveal that the EL spectra of the NIR LECs doped with DOTCI and DTTCI center at ca. 730 and 810 nm, respectively. Moreover, the DOTCI and DTTCI doped NIR LECs achieve peak EQE (power efficiency) up to 0.80% (5.65 mW W(-1)) and 1.24% (7.84 mW W(-1)), respectively. The device efficiencies achieved are among the highest reported for NIR LECs and thus confirm that phosphorescent sensitized fluorescence is useful for achieving efficient NIR LECs.     

连茚四酮类有机磁性化合物的合成及性能

分别以邻苯二甲酸酐、4-甲基邻苯二甲酸酐和四氯邻苯二甲酸酐为原料, 采用Gabriel & Leupold法合成了3个连茚四酮类化合物, 即2,2′-二茚满-1,1′,3,3′-四酮(1)、5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2)和4,4′,5,5′,6,6′,7,7′-八氯-2,2′-二茚满-1,1′,3,3′-四酮(3). 元素分析、¹H NMR、FTIR 和MS测定分析表明, 此3个分子主要以烯醇式存在, 同时存在分子内氢键; 通过电子自旋共振(ESR)谱测定, 给出了各化合物的ESR谱参数值. 结果表明, 化合物1~3均有良好的ESR图谱, 是只含有C, H, O及Cl的纯有机磁性化合物, 分子内都含有稳定的自由基. 通过量子化学计算, 推测出了自由基可能形成的位置及此类化合物最可能的存在形式(烯醇式), 且证明分子内存在1个氢键.     

A theoretical study of cohesion, structural deformation, inclusion, and dynamics in porous hydrogen-bonded molecular networks

Molecules with multiple sites of hydrogen bonding attached to suitable cores tend to crystallize as open networks. The resulting crystals can have the following unusual properties: They can include significant amounts of guest molecules; the guests are typically located in channels and can be exchanged without loss of crystallinity; and the geometry of the networks can change in response to new guests. We have found that DFT calculations can provide accurate simulations of the unusual structure and properties of such materials, represented by crystals of prototypic tetrapyridinone 1. These calculations have yielded three key insights that cannot be obtained directly from experiments. (1) The hypothetical porous network obtained by removing guests from crystals of compound 1 is highly flexible, and its deformations are inherently anisotropic, leading to lengthening or shortening of the channels along the c axis and no significant changes along the a and b axes. (2) Quantitative analysis of the total cohesive energy has revealed that hydrogen bonding within the network makes a dominant contribution, along with interactions of guests with the network. (3) Differences in the overall stability of crystals of compound 1 as the guests are varied do not arise primarily from significant changes in the cohesive energy of the network itself; instead, differences in guest-guest interactions play a key role, resulting from the nature of the guests and constraints imposed by the surrounding network. These insights, together with the results of ab initio molecular dynamics, help explain how hydrogen-bonded networks can be robust yet permit molecular movement that underlies the exchange of guests and adaptive porosity. These insights promise to be of general value to scientists studying ordered molecular materials in which strong directional interactions are prominent.     

2 ,2’,7,7’-四碘-9,9’-螺二芴的简便合成方法

2,2',7,7'-四碘-9,9'-螺二芴具有特殊的螺形结构,它是合成空穴导电材料OMeTAD和TAD及其它一些导电高分子的关键中间体.我们发展了一种条件温和简便的方法,高产率地合成了目标分子.     

Organic sol–gel synthesis of microporous molecular networks containing spirobifluorene and tetraphenylmethane nodes

The microporous molecular networks based on rigid tetrafunctional units are synthesized via organic sol–gel polymerization of 2,2′,7,7′‐tetraamino‐9,9′‐spirobifluorene (TASBF) and/or tetrakis(4‐aminophenyl)methane (TAPM) with a diisocyanate, hexamethylene diisocyanate (HDI), or p‐phenylene diisocyanate. This study is performed as an extension of our previous report on the first organic sol–gel method, which enabled the synthesis of microporous molecular networks via a two‐stage mechanism involving the formation of colloidal dispersions of the nanoparticulate molecular networks and their subsequent growth to monolithic networks on solvent evaporation. The sol–gel‐synthesized molecular networks obtained by incorporating TASBF as a network former show improved porosity, processability, and thermal stability than the TAPM‐based system. The improved porosity of TASBF‐based networks is attributed to higher rigidity of the spirobifluorene compared with the tetraphenylmethane units. We also demonstrate the synthesis of mixed organic molecular networks by sol–gel copolymerization of the two network formers, TASBF and TAPM, and a diisocyanate monomer. The sol–gel transformation of TASBF/TAPM/HDI occurred at longer reaction times with increasing the amount of TASBF in the TASBF/TAPM/HDI mixture. The results indicate that the organic sol–gel method can be further optimized by adjusting various synthesis parameters to create new functional organic molecular network materials. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Direct C−H Arylation Meets Perovskite Solar Cells: Tin‐Free Synthesis Shortcut to High‐Performance Hole‐Transporting Materials

In contrast to the traditional multistep synthesis, we demonstrate herein a two‐step synthesis shortcut to triphenylamine‐based hole‐transporting materials (HTMs) through sequential direct C?H arylations. These hole‐transporting molecules are fabricated in perovskite‐based solar cells (PSCs) that exhibit promising efficiencies up to 17.69 %, which is comparable to PSCs utilizing commercially available 2,2′,7,7′‐tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the HTM. This is the first report describing the use of step‐saving C?H activations/arylations in the facile synthesis of small‐molecule HTMs for perovskite solar cells.     

CsPbIBr2钙钛矿太阳能电池中通过氧气诱导Spiro-OMeTAD快速氧化

Spiro-OMeTAD是钙钛矿型太阳能电池中应用最广泛的空穴传输材料,它本身的空穴传输率很低,需要氧化之后才能满足高效率太阳能电池器件的要求.然而,Spiro-OMeTAD在空气中的氧化时间较长,同时空气中的水分会造成器件效率的下降以及器件质量不稳定等不良后果.基于此,我们通过一步法制备CsPbIBr2无机钙钛矿太阳...     

Convenient and efficient reduction of 1,1'-binaphthyls to H8-1,1'-binaphthyl derivatives with Pd and Ru catalysts on solid support

Hydrogenation of chiral 2,2'-functionalized 1,1'-binaphthyls with Pd and Ru solid-supported metal catalysts was found to be a clean and convenient pathway to 5,5',6,6',7,7',8,8'-octahydro-1,1'-dinaphthyl derivatives. In most cases no racemization was observed in the course of the reaction.     

1,1',3,3',6,6',8,8'-Octachloro-9,9'-bifluorenylidene and perchloro-9,9'-bifluorenylidene,two exceedingly twisted ethylenes

The syntheses of 1,1',3,3',6,6',8,8'-octachloro-9,9'-bifluorenylidene (1), its precursors, and the byproduct 3,3',5,5'-tetrachloro-4-(trichloromethyl)biphenyl (5) are described. Accurate structural X-ray data on 1 and on perchloro-9,9'-bifluorenylidene (2) are reported and discussed. Because of chlorine overcrowding, the dihedral angles between their two identical fluorenylidene moieties are abnormally large, the central-ethylene twist angles being 55 and 66 degrees, respectively. Significant out-of-plane carbon-chlorine bond bending is likewise exhibited. Their ESR spectra and magnetic measurements prove that they are singlet species. The exceptionally large bathochromic displacements of their UV-vis absorption spectrum with respect to that of their parent hydrocarbon are mainly attributed to bond bending and molecular warping.     

Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material

The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine(CuPc-DMP) via only two simple steps,has been incorporated as a hole-transporting material(HTM) in mesoscopic perovskite solar cells(PSCs).The optimized devices based on such a HTM afford a very competitive power conversion efficiency(PCE) of up to 17.1%measured at 100 mW cm~(-2) AM 1.5G irradiation,which is on par with that of the well-known 2,2',7,7'-tetrakis(N'N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene(spiro-OMeTAD)(16.7%) under equivalent conditions.This is,to the best of our knowledge,the highest value reported so far for metal organic complex-based HTMs in PSCs.The advantages of this HTM observed,such as facile synthetic procedure,superior hole transport characteristic,high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs.The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.     

Synthesis and Characterization of Soluble Reactive Copoly (aryl ether ketone ketone)

Poly (aryl ether ketone)s are a category of high performance engineering plastics, widely used in electronic, electric, and military industries1. For their general excellent properties, many new products are developed. In recent years, much attention has been paid to synthesize soluble or reactive poly (aryl ether ketone)2,3. In this letter, we report the synthesis of a novel soluble reactive copoly (aryl ether ketone ketone) from 2,2-p-hydroxyphenyl-iso-propane 3, functionalized chemical 1, a…     

Catalytic aerobic oxidation of nor-binaltorphimine (nor-BNI) analogs without 4,5-epoxy bridge affords a more selective ligand for kappa opioid receptor than the representative kappa antagonist nor-BNI

An analog of nor-binaltorphimine (nor-BNI) without the 4,5-epoxy bridge, 17,17'-bis(cyclopropylmethyl)-6,6',7,7'-tetrahydro-6,6'-imino-14beta,14'alpha-dihydroxy-3,3'-dimethoxy-7,7'-bimorphinan (4), which was the precursor of the designed compound 1 as a selective kappa(3) opioid receptor antagonist, was catalytically oxidized with oxygen in the presence of platinum to give the 5'-oxo derivative 3 with some other oxidized products. Morphinan derivatives without the 4,5-epoxy moiety were labile to oxygen, although the corresponding 4,5-epoxymorphinan derivatives resisted aerobic oxidation. One of the oxidized nor-BNI analogs without 4,5-epoxy bridge, compound 18, showed high affinity and selectivity for kappa opioid receptor.     

Asymmetric Morita-Baylis-Hillman reaction of arylaldehydes with 2-cyclohexen-1-one catalyzed by chiral bis(thio)urea and DABCO

Novel bis(thio)urea organocatalysts were synthesized from axially chiral (R)-(-)-5,5',6,6',7,7',8,8'-octahydro-1,1'-binaphthyl-2,2'-diamine (H8-BINAM), and their catalytic abilities have been examined in the Morita-Baylis-Hillman reaction of 2-cyclohexen-1-one or 2-cyclopenten-1-one with a wide range of aromatic aldehydes in combination with DABCO. The best result was achieved in the reaction of 3-fluorobenzaldehyde with 2-cyclohexen-1-one to give the desired Morita-Baylis-Hillman product in 79% yield and 88% ee.