Effect of Unmodified and Surface Treated Fumed Silica on the Polymerization of HEMA

Thermal polymerization of 2-hydroxyethylmethacrylate (HEMA) and radical polymerization initiated by an acrylamid complex of cobalt nitrate in the presence of unmodified and surface treated silicas have been investigated. It has been found that the introduction of fillers, especially silicas with grafted silicon hydride groups, makes an essential effect on the rate and degree of the HEMA polymerization.     

Thermomechanical properties of polymeric composites based on 2-hydroxyethylmethacrylate and fumed silicas

Summary Thermomechanical properties have been investigated for the composites synthesized by the thermal polymerization of 2-hydroxyethylmethacrylate or its polymerization initiated with acrylamide complex of cobalt nitrate in the presence of the fumed silica or silicon hydride-containing silicas. The effect of the filler surface nature on temperature dependencies of deformability of the polymeric composites has been studied.     

Synthesis and characterization of functional chemically modified silica fillers

Elaborated methods of synthesis of chemically modified silicas with grafted silicon hydride and amino groups are analyzed. Experimental results on use of modified silicas with bonded amino groups as fillers of carboxyl-containing rubbers and epoxy resins are reported. It was shown that modified silica fillers with grafted silicon hydride groups could be applied for carrying out processes of catalytic solid-phase hydrosilylation of 2-hydroxyethylmethacrylate and some other functional olefins.     

Potentialities of silane-modified silicas to regulate palladium nanoparticles sizes

A promising approach to control palladium nanoparticle sizes by application of silane modified silicas was suggested. The combination of reductive properties of silicon hydride groups and hydrophobic properties of alkylsilyl groups which act as agglomeration limiters for metal nanoparticles gives an opportunity to synthesize uniformly distributed particles with a specified size. Silicas modified with triethoxysilane (TES) and diisopropylchlorosilane (DIPCS), as well as, the combination of hexamethyldisilazane (HMDS) and triethoxysilane were applied for formation of such bifunctional matrices. Properties of the silane-modified silica samples and changes occurred during the formation of palladium nanoparticles were studied by IR spectroscopy. Thermal stability of surface chemical compounds was investigated by thermogravimetric analysis (TGA); low-temperature nitrogen adsorption was used to study structural properties of the applied materials. With the use of transmission electron microscopy (TEM) the dependence of palladium nanoparticle size on the nature of support surface layer was found.     

纳米SiO_2粒子表面官能团对尼龙6原位聚合的影响

研究了无机纳米粒子表面反应性官能团对尼龙 6 纳米SiO2 原位聚合的影响 .红外光谱和热重分析结果证实了无论对SiO2 进行表面处理与否 ,在原位聚合过程中其表面均能形成一定量的接枝聚合物 .随表面反应性官能团数目的增加 ,SiO2 的表面接枝率呈上升趋势 .与纯的尼龙 6相比 ,带有不同反应性官能团的纳米SiO2 的加入使复合产物的分子量呈下降的趋势 .对应于复合体系中可能发生的反应 ,提出了几种可能的表面接枝的键接方式 .力学性能测试结果显示经表面处理的SiO2 的加入能同时提高复合物的强度和韧性 ,而加入未处理的SiO2 时 ,材料强度可得到提高 ,但韧性明显降低 ,表明由偶联剂处理引入的柔性界面层的存在对于复合材料的力学性能有重要的影响     

TG and DSC studies of filled porous copolymers

A complex approach including thermogravimetry, differential thermal analysis and differential scanning calorimetry was applied to study characteristics of non-filled and filled porous copolymers of divinylbenzene with styrene or some acrylic monomers: di(methacryloyloxymethyl)naphthalene, methacrylic ester of p,p’-dihydroxydiphenylpropane diglycidyl ether, and dimethacrylglycolethylene. High disperse silicas with the grafted methyl and silicon hydride groups in the surface layer were used as fillers. The kinetic parameters of thermal degradation for composites obtained were determined by different methods.     

Polymerization of vinyl monomers in the presence of silica having surface functional groups

The surface of silica was modified by mercaptopropyl, chloropropyl, aminopropyl, and methacryloxypropyl groups by the treatment of silica with the corresponding silane coupling agents, and the effects of functional groups on the surface on the polymerization of vinyl monomers initiated by benzoyl peroxide or 2,2-azobisisobutyronitrile were investigated. Although the rate of the polymerization of vinyl monomers in the presence of silica was almost equal to that in the absence of silica, a part of polymer formed was grafted onto silica surface. The polymerization was considerably retarded in the presence of these functionalized silicas and the corresponding polymers were effectively grafted onto the surface. The molecular weight of ungrafted polymer formed in the presence of the functionalized silica was lower than that formed in the presence of unmodified silica. This indicates that the chain transfer reaction of growing polymer radical to functionalized silica surface forms radicals on the surface, which then couples with growing polymer radical and/or reinitiates the polymerization to give rise to the grafting of polymers onto the surface. In the case of silica having methacryloxypropyl groups, the grafting based on the copolymerization of vinyl monomer with the surface methacryloxypropyl groups was considered to successfully proceed.     

Scale-up synthesis of vinyl polymer-grafted nano-sized silica by radical polymerization of vinyl monomers initiated by surface initiating groups in the solvent-free dry-system

For the purpose of the prevention of the environmental pollution and the simplification of reaction process, the scale-up radical graft polymerization of vinyl monomers onto nano-sized silica surface initiated by azo groups and peroxycarbonate groups previously introduced onto the surface in the solvent-free dry-system was investigated. The introduction of azo groups onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid chloride). On the other hand, the introduction of peroxycarbonate groups onto the silica surface was achieved by Michael addition of surface amino groups to t-butylperoxy-2-methacryloyloxyethylcarbonate. The graft polymerization of vinyl monomers onto the surface was successfully achieved by splaying monomers to nano-sized silica having azo and peroxycarbonate groups in solvent-free dry-system. It is interesting to note that the formation of ungrafted polymer was depressed in comparison with graft polymerization in solution: the grafting efficiency was 90-95%. In addition, in the solvent-free dry-system, the grafting of copolymer having pendant peroxycarbonate groups onto the nano-sized silica surface and the radical postgraft polymerization of styrene initiated by the pendant initiating groups of the grafted copolymer chain on the silica surface was investigated.     

Preparation and properties of biocompatible polymer-grafted silica nanoparticle

Grafting of biocompatible polymer onto the surface of silica nanoparticles was achieved by radical graft polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC), initiated by azo groups previously introduced onto the surface or by a system consisting of Mo(CO)₆ and trichloroacetyl groups on the silica surface. Both of these systems have the ability to initiate graft polymerization of MPC, resulting in the formation of poly(MPC)-grafted silica, but the percentage of poly(MPC) grafting for the latter initiating system was much higher than that of the former. The amount of moisture that could be adsorbed onto the silica surface was found to increase with increasing poly(MPC) grafting. This indicates that grafting of poly(MPC) onto the silica surface markedly increases the hydrophilic nature of the surface. The contact angle of water in composites prepared from poly(vinyl alcohol) and poly(MPC)-grafted silica was found to decrease with increasing poly(MPC)-grafted silica content. When poly(MPC)-grafted silica was added to water containing a small amount of chloroform, it was found to act as stabilizer for droplets of chloroform. In addition, according to tests by the Lee-White method, poly(MPC)-grafted silica shows non-thrombogenic characteristics.     

Adsorption of hydrocarbons from solutions and gas phase on silica and alumina modified with silver and gold ions

The paper reports the immobilization of Ag⁺ cations on alumina and silica and AuCl ₄ ^? anions on amino silica and alumina. The method of inverse gas chromatography have demonstrated that Ag(I)-silica is selective for the separation of alkanes, alkenes, alkines, and arenes. The dependence of the capacitance of Ag(I) and Au(III) composites with regard to phenylacetylene (PHA) on the nature of the carriers, surface concentration, and technique of immobilizing ion metals has been considered. The isotherms of the adsorption of PHA from solutions in octane have been measured. It has been revealed that the capacitance of composites with regard to toward PHA prepared by the immobilization of ammoniates of silver nitrate on silicon dioxide is several times higher than for composites based on alumina with the same silver concentration and composites prepared by the immobilization of silver nitrate on silicon dioxide. The capacitance of the Au(III) composite based on alumina for PHA is significantly higher than for that based on aluminum oxide. The highest capacitance for PHA (0.83 and 0.88 molecules per metal ion) is observed for Ag(I) silica and the Au(III) alumina composite. In the visible region, the diffuse reflection spectra of amino silica Au(III) composites have a significant shift of the maximum of adsorption band along with the decrease in the concentration of immobilized anions of AuCl ₄ ^? , which evinces the formation of coordination bonds between free amin?propyl groups of the silica carrier and gold atom. The formation of these bonds prevents the adsorption of PHA on amino silica Au(III) composites with low gold concentrations.     

Effective grafting of polymers onto ultrafine silica surface: Photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface and Mn2(CO)10

The effective grafting of vinyl polymers onto an ultrafine silica surface was successfully achieved by the photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface with Mn₂(CO)₁₀ under UV irradiation at 25 °C. The introduction of trichloroacetyl groups onto the surface of silica was achieved by the reaction of trichloroacetyl isocyanate with surface amino groups, which were introduced by the treatment of silica with 3‐aminopropyltriethoxysilane. During the polymerization, the corresponding polymers were effectively grafted onto the surface, based on the propagation of polymer from surface radicals formed by the interaction of trichloroacetyl groups and Mn₂(CO)₁₀. The percentage of poly(methyl methacrylate) grafting onto the silica reached 714.6% after 90 min. The grafting efficiency (proportion of grafted polymer to total polymer formed) in the polymerization of methyl methacrylate was very high, about 80%, indicating the depression of formation of ungrafted polymer. Polymer‐grafted silica gave a stable colloidal dispersion in good solvents for grafted polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2157–2163, 2001     

Sorption Characteristics of Porous Styrene-Divinylbenzene Copolymers Filled with Modified Silica

The structural parameters of porous styrene-divinylbenzene copolymer, unfilled and filled with silica containing surface trimethylsilyl and silicon hydride groups were studied by aniline and p-chloroaniline adsorption. It has been shown that embedding of chemically modified silica affects the material porosity and decreases the copolymer swelling in benzene.     

Surface‐dependent effect of functional silica fillers on photocuring kinetics of hydrogel materials

Two types of silica: precipitated (P, prepared in non‐polar media, a new type, submicrometer sized) and fumed (F, nanosized), both unmodified and surface modified are investigated as functional fillers for potential applications in nanocomposites with poly(2‐hydroxyethyl methacrylate) matrix. Special attention is paid to the kinetics of composite formation in an in situ photopolymerization process. Silica‐containing formulations polymerize faster; this effect is much stronger for silica P having much larger particle size than silica F. Surface treatment leads to further acceleration of the polymerization in case of silica P but to retardation in case of silica F; the effect of modification of the filler surface on properties of composites is different for each of the silicas. The obtained results are discussed in terms of effects of curvature of silica particles, surface properties, solvation cell, interphase region, viscosity changes, and morphology of the resulting composites. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3472–3487     

Method for Determining the Concentration of Isolated Silanol Groups on Silica Surface with Dimethylchlorosilane

The chemical interaction between dimethylchlorosilane and silica of varied degree of hydroxylation was subjected to a systematic study. The optimal conditions for complete substitution of isolated silanol groups with dimethyl hydride silyl groups were found. It is suggested that the reaction of dimethylchlorosilane with the surface of silicon dioxide can be used to determine the concentration of free silanol groups in the surface layer of silica.     

High‐Temperature Chlorination‐Reduction Sequence for the Preparation of Silicon Hydride Modified Silica Surfaces

A general method for the functionalization of silica surfaces with silicon hydride (Si–H) groups is described for four different preparations of silica. The silica surface is reduced in a two‐step chlorination–reduction procedure within a simple gas‐flow system at high temperatures. After initial dehydroxylation of the silica surface, silicon chloride groups are formed by the reaction with thionyl chloride. The chlorination activates otherwise inaccessible surface siloxane moieties. A high silicon–hydride surface concentration results from the subsequent reduction of the chlorinated surface with hydrogen. The physical properties of the resulting silica are analyzed using scanning electron microscopy, as well as dynamic light scattering and Brunauer–Emmet–Teller measurements. The chlorination–reduction sequence has no significant impact on the structure, surface area and mesopore size of the silica materials used. The surface of the materials is characterized by diffuse reflectance infrared Fourier transform (DRIFT) and ²⁹Si CP/MAS NMR spectroscopy. The silicon–hydride groups are mostly of the ‐type. The use of high temperatures (>800 °C) results in the condensation of internal and surface silanol groups. Therefore, materials with both a fully condensed silica matrix as well as a surface free of silanol groups are obtained. The materials are ideal precursors for further molecular silica surface modification, as demonstrated with a ferrocene derivative.     

Filler-elastomer interactions: influence of silane coupling agent on crosslink density and thermal stability of silica/rubber composites

In this work, the crosslink density and thermal stability of the silica/rubber composites treated by silane coupling agents, i.e., gamma-aminopropyl triethoxysilane (APS), gamma-chloropropyl trimethoxysilane (CPS), and gamma-methacryloxypropyl trimethoxysilane (MPS), were investigated. The chemical structures of modified silicas were studied in term of solid-state 29Si NMR spectroscopy. The crosslink density of the composites was determined by swelling measurement. The development of organic functional groups on silica surfaces treated by coupling agents led to an increase in the crosslink density of the composites, resulting in increasing final thermal stability of the composites. The composites treated by MPS showed the superior crosslink density and thermal stability in these systems. The results could be explained by the fact that the organic functional groups of silica surfaces by silane surface treatments led to an increase of the adhesion at interfaces between silicas and the rubber matrix.     

Metamorphosis of ordered mesopores to micropores: periodic silica with unprecedented loading of pendant reactive organic groups transforms to periodic microporous silica with tailorable pore size

Ordered porous silicas with unprecedented loadings of pendant vinyl groups have been synthesized via co-condensation of tetraethyl orthosilicate (TEOS) and triethoxyvinylsilane (TEVS) under basic conditions in the presence of cetyltrimethylammonium surfactant. The resulting organosilicate-surfactant composites exhibited at least one low-angle X-ray diffraction (XRD) peak up to the TEVS:TEOS molar ratio of 7:3 (70% TEVS loading) in the synthesis gel. The surfactant was removed from these composites without any structural collapse. Nitrogen adsorption provided strong evidence of the presence of uniformly sized pores and the lack of phase separation up to TEVS:TEOS ratios as high as 13:7 (65% TEVS loading), whereas (29)Si MAS NMR and high-resolution thermogravimetry showed essentially quantitative incorporation of the organosilane. Thus, a hitherto unachieved loading level for pendant groups, considered by many to be impossible to achieve for stable organosilicas because of the expected framework connectivity constraints, has been obtained. The resulting vinyl-functionalized silicas exhibited gradually decreasing pore diameter (from 2.8 to 1.7 nm for TEVS loadings of 25-65%) and pore volume as the loading of pendant groups increased, but the specific surface area was relatively constant. Because of the reactivity of vinyl groups, ordered silicas with very high loadings of these groups are expected to be robust starting materials for the synthesis of other organic-functionalized ordered microporous materials. Herein, we demonstrate that these starting materials can also be transformed via calcination into ordered microporous silicas with pore diameters tailorable from 2.5 to as little as 1.4 nm simply by using an appropriate loading of the vinyl-functionalized precursor. This ease of the micropore size adjustment and the attained degree of structural ordering (as judged from XRD) have not been reported before. The novel ordered microporous materials reported herein are promising as adsorbents and catalyst supports.     

Chemical modification of silica surfaces

The formation of phenylaerosil via silica hydride in the gas phase and the subsequent introduction of nitro and amino groups in solution has been followed using IR and UV spectroscopy. The direct reaction of aminophenyltriethoxysilane (APhS) with the silica surface has also been investigated.     

Modified silicas as supports for single-site zirconocene catalysts

The reactivity of Cp₂ZrCl₂ towards partially dehydroxylated silica was evaluated and the effects of chemical modification of this silica were studied. Different modified silicas were prepared by reaction of the original partially dehydroxylated silica with silicon ethers, EtOSiMe₃ and (Me₃Si)₂O, or a silazane, (Me₃Si)₂NH. The resulting materials were activated with MAO and the catalytic systems were evaluated in ethylene polymerization. The different reactions were monitored by FT-IR spectroscopy. The catalysts were characterized by elemental analysis as well as by infrared and UV–vis spectroscopy. Grafting of organosilanes occurs by reaction with reactive siloxane bridges. The new SiR₃ groups formed on the surface react with Cp₂ZrCl₂ to form volatile ClSiMe₃ and oxo zirconium species. These latter species are active, after the addition of MAO, in ethylene polymerization. The effects caused by changing the nature of the modifier in the grafting reaction with the metallocene, as well as the catalytic activities of the resulting materials, are presented and discussed.     

Effect of chemical nature of nanosized silica surface on the adsorption of D-glucose

The powders of unmodified silica, as well as silicas modified with poly(ethyleneimine) and 3-aminopropyltriethoxysilane are synthesized by the sol-gel method. The obtained powders and their suspensions in water are characterized by IR spectroscopy, atomic force microscopy, and spectroturbidimetry. The adsorption ability of D-glucose on the surface of the aforementioned powders is studied. It is shown that this monosaccharide is not adsorbed on the surface of unmodified silica, but is adsorbed on the surface of aminated silicas. The differences in the interaction of D-glucose with the studied particles are discussed from the viewpoint of the nature of surface chemical groups.