Thermal decomposition of copolymers of styrene and halogenated monomers

Copolymers of 1,2,2,2-tetrachloroethyl esters of unsaturated acids and halogenated N-phenyl maleimides with styrene were pyrolyzed; volatile products were analyzed with a mass spectrometer combined with a gas chromatograph. Hydrogen halide and carbon dioxide in the volatile products were determined during the thermal decomposition of copolymers in glass ampoules; the acyl chloride groups were determined in the residues. The thermal decomposition of copolymers of tetrachloroethyl esters with styrene sets in at ca. 230° by the release of chloral from the copolymer and splitting of some of the CCl bonds in the copolymer. The decomposition of copolymers of styrene with halogenated N-phenyl maleimides starts above 300° by depolymerization of the polystyrene chain sections and by splitting of some of the carbon-halogen bonds. At 310 and 500° for copolymers of tetrachloroethyl esters and at 500° for halogenated N-phenyl maleimides, there is radical dehydrohalogenation of the copolymers, with depolymerization of polystyrene blocks and splitting of carbon-carbon bonds in the main chain.     

Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant

Journal of Thermal Analysis and Calorimetry - Aluminum(Al)/ammonium perchlorate(AP)/hydroxyl-terminated polybutadiene (HTPB) propellant is the most widely used propulsion system currently. Its...     

Effect of styrene oligomers on syndiospecific polymerization of styrene

Styrene oligomers, preferentially consisting of styrene dimers and trimers, are formed by a free radical mechanism at the thermal polymerization of stabilizer-free styrene during storage and at higher polymerization temperatures. The identity of several dimer and trimer fractions formed in such a free radical polymerization, their influence on a coordinative polymerization reaction, the syndiospecific polymerization of styrene, as well as their effect on the properties of the resulting polymers has been investigated.Styrene dimers and styrene trimers reduce the polymerization activity of the transition metal catalyst significantly, especially at low amounts of oligomers added to the styrene. This behavior is discussed with respect to a proposed mechanism involving complexation of the active transition metal species with the specific oligomer instead of the styrene monomer, resulting in increased steric hindrance towards insertion of a styrene molecule to the active site.Both oligomers reduce the molecular weight of the syndiotactic polystyrene, by acting as chain-transfer agents. The constancy of the polydispersity over the whole concentration range of added dimer or trimer indicates that the uniformity of the active sites of the coordinative polymerization is not significantly influenced by the presence of the oligomers.The thermal properties of the polymers demonstrate that the oligomers do not affect the high syndiospecificity of the active catalytic sites, whereas the increase in crystallization temperature with increasing amounts of styrene dimer or trimer is comparable to effects observed by the addition of crystallization nucleators to semicrystalline polymers.     

Thermal stability of poly(styrene) containing phosphorus in the mainchain

For many applications poly(styrene) must be treated to reduce its flammability. This is usually done by incorporating a flame retardant additive, usually an organohalogen compound, into the formulation as the polymer is being processed. A potentially very efficient way of introducing flame retardance would be to incorporate a suitable structural unit directly into the polymer. This can be done by using 2,4,4,5,5-pentaphenyl-1,3,2-dioxaphospholane as an initiator for styrene polymerization. The strained carbon–carbon bond of the phospholane undergoes homolysis at moderate temperatures to generate a diradical which initiates polymerization. The resulting polymer contains an O–P–O unit in the mainchain. Thermogravimetry indicates that the thermal stability of the polymer is quite comparable to that of poly(styrene) generated by conventional methods.     

Thermal degradation and combustion of a novel UV curable coating containing phosphorus

A novel phosphorus monomer (BDEEP) has been synthesized by allowing phosphorus oxychloride to react with 2-hydroxyethyl acrylate (HEA) and 1,4-Butane diol. Its structure was characterized by Fourier transformed infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance spectroscopy (¹H NMR). The UV-curing behavior was investigated by FTIR. The combustibility was examined by microscale combustion colorimeter (MCC). The heat release rate (HRR) and heat release capacity (HRC) are 42.1 w/g and 44.0 J/g K, respectively. The thermal degradation was characterized using thermogravimetric analysis/infrared spectrometry (TG-IR). The curve of TGA indicates that there are three characteristic degradation temperature stages for the cured film, which was further characterized by real time Fourier transform infrared (RTFTIR) measurement. It is proposed that the flame retardant action results from decomposition of phosphate to form poly(phosphoric acid), which catalyses the breakage of bonds adjacent to carbonyl groups to form the char, preventing the sample from burning further. The volatilized products formed on thermal degradation of BDEEP indicated that the volatilized products are CO, CO₂, water, alkane, carbonyl, phosphorus compounds and aromatic compounds according to the temperature of onset formation.     

Synthesis and properties of novel liquid crystalline materials with super high birefringence: styrene monomers bearing diacetylenes, naphthyl, and nitrogen-containing groups

Three new liquid crystal asymmetrical styrene monomers bearing diacetylenes, naphthyl, and nitrogen-containing groups were successfully synthesized from 2-(bromoethynyl)-6-(hexyloxy)naphthalene, 4-(4-bromo-2-vinylphenyl)-2-methylbut-3-yn-2-ol, and derivatives of 4-ethynylaniline. The molecular structures of these compounds were confirmed by FTIR, ¹H NMR spectroscopy, elemental analysis, and mass spectrometry. The liquid crystalline properties of monomers were characterized by differential scanning calorimetry and polarized light microscopy. Results indicated that all the compounds exhibited the nematic phase in liquid crystal state and super high optical birefringence of 0.5-0.8. The change of terminal nitrogen-containing group affected the birefringence values in the order of -N(CH₃)₂<-NH₂<-NCS. Moreover, measurements using UV-vis and fluorescence spectroscopy showed their good photoluminescence properties and high quantum efficiency of 0.4-1.0.     

Thermal analysis studies on combustion characteristics of seaweed

Combustion experiments of three typical seaweeds (Gracilaria cacalia, Enteromorpha clathrata and Laminaria japonica) have been studied using a DTA-60H Thermal Analyzer and the combustion processes and characteristics are studied. Thermogravimetric experiments are carried out on the samples with 0.18 mm particle size at the heating rate of 20°C min⁻¹. The results indicate that the ignition mode of seaweed is homogeneous and the combustion process is composed of dehydration, the pyrolysis and combustion of volatile, transition stage, the combustion of char as well as the reaction at high temperature. And the combustion characteristic parameters are obtained such as ignition temperature, maximum rate of combustion, burnout temperature etc. The combustion models of these seaweeds are also analyzed. The combustion characteristics and model differences between the seaweed and woody biomass are caused by the differences of volatile components. The combustibility indexes of seaweeds calculated are better than that of woody biomass, and the index of Gracilaria cacalia is the best. At last, activation energies are determined using Arrhenius model that is solved by binary linear regression method.     

Sterically hindered nitrogen-containing compounds in radical polymerization of styrene

The influence exerted on the radical polymerization of styrene by organic compounds containing a tert-butyl group and a nitrogen atom in various oxidation states (tert-butylamine, 2-methyl-2-nitrosopropane, 2-methyl-2-nitropropane) was examined.     

Radiation-initiated emulsion copolymerization of styrene and carboxylic acid monomers

The emulsion Copolymerization of styrene and carboxylic acid monomers such as acrylic, methacrylic, and itaconic acids (AAc, MAAc, IAc) was studied by using ⁶⁰Co γ-rays as initiator and sodium do-decylsulfate as emulsifier. The polymerization behavior of these acid monomers was followed by simultaneous conductometric and potentiometric titrations for a latex sample taken in polymerization. The polymerization rate of these acid monomers increases in the following order of hydrophobicity: IAc < AAc < MAAc; this suggests that their polymerization sites are mainly the surface and/or subsurface regions of latex particles. The copolymerization rate of styrene and acid monomer increases with an increase in the acid monomer content for AAc and MAAc, whereas for IAc the rate decreases. The particle sizes determined by the stopped-flow method reveal that this variation of copolymerization rate cannot be explained by the number of growing particles and should be attributed to another factor; for instance, the transfer rate of styrene molecules from oil droplets to growing particles.     

Thermal characteristics of the combustion process of biomass and sewage sludge

The combustion of two kinds of biomass and sewage sludge was studied. The biomass fuels were wood biomass (pellets) and agriculture biomass (oat). The sewage sludge came from waste water treatment plant. The biomass and sludge percentage in blends with coal were 10 %. The studied materials were characterised in terms of their proximate and ultimate analysis and calorific value. The composition of the ash of the studied fuels was also carried out. The behaviour of studied fuels was investigated by thermogravimetric analysis (TG, DTG and DTA). The samples were heated from an ambient temperature up to 1,000 °C at a constant three rates: 10, 40 and 100 °C min^?1 in 40 mL min^?1 air flow. TG, DTG and DTA analysis showed differences between coal, biomass fuels and sewage sludge. 10 % addition of studied fuels to the mixture with coal changed its combustion profile in the case of sewage sludge addition. The combustion characteristics of fuel mixtures showed, respectively, qualitative summarise behaviour based on single fuels. Evolved gaseous products from the decomposition of studied samples were identified. This study showed that thermogravimetric analysis connected with mass spectrometry is useful techniques to investigate the combustion and co-combustion of biomass fuels, and sewage sludge, together with coal. Non-isothermal kinetic analysis was used to evaluate the Arrhenius activation energy and the pre-exponential factor. The kinetic parameters were calculated using Kissinger–Akahira–Sunose model.     

Some monomers,oligomers and polymers with conjugated triple bonds

In the first part new monoaminodiacetylenes with different numbers of CH₂-groups, the formation of Perowskit-type Mn complexes and their polymerizability are described. Symmetrical diaminodiacetylenes and some derivatives therefrom have also been prepared. The second part deals with different types of polymers with diacetylene units in the backbone. Under irradiation color formation and crosslinking take place. Well-defined low molecular weight model compounds of polydiacetylenes is the subject of the third part. Finally rod-like but soluble polymers with alternating p-phenylene and acetylene units are described.     

Liquid crystal dimers and higher oligomers: between monomers and polymers

The underlying theme of this Critical Review is the relationship between molecular structure and liquid crystalline behaviour in a class of materials referred to as liquid crystal oligomers. For the purposes of this review, a liquid crystal oligomer will be defined as consisting of molecules composed of semi-rigid mesogenic units connected via flexible spacers. Much of the review will be devoted to structure-property relationships in the simplest oligomers, namely dimers, in which just two mesogenic units are connected by a single spacer. Along the way we will see how this molecular architecture has been exploited to address issues in a range of quite different areas and has given rise to potential applications for these materials. On the whole, only compounds in which the mesogenic units are linked essentially in a linear fashion will be considered while structures such as liquid crystal dendrimers and tetrapodes fall outside the scope of this review. The review will be of interest not only to scientists working directly in this area but in particular to those interested in understanding the relationships between structure and properties in polymers, and those designing materials for new applications.     

Gas-phase conformations of cationized poly(styrene) oligomers

The gas-phase conformations of poly(styrene) oligomers cationized by Li+, Na+, Cu+, and Ag+ (M+ PSn) were examined using ion mobility experiments and molecular mechanics/ dynamics calculations. M+PSn ions were formed by MALDI and their ion-He collision cross-sections were measured by ion mobility methods. The experimental collision cross-sections of each M+PS n-mer were similar for all four metal cations and increased linearly with n. Molecular modeling of selected M+ PS oligomers cationized by Li+ and Na+ yielded quasi-linear structures with the metal cation sandwiched between two phenyl groups. The relative energies of the structures were approximately 2-3 kcal/mol more stable when the metal cation was sandwiched near the middle of the oligomer chain than when it was near the ends of the oligomer. The cross-sections of these theoretical structures agree well with the experimental values with deviations typically around 1-2%. The calculations also show that the metal cation tends to align the phenyl groups on the same side of the -CH2-CH- backbone. Calculations on neutral poly(styrene), on the other hand, showed structures in which the phenyl groups were more randomly positioned about the oligomer backbone. The conformations and metal-oligomer binding energies of M+PS are also used to help explain CID product distributions and fragmentation mechanisms of cationized PS oligomers. etry     

Synthesis of silicon-containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Silicon-containing divinyl ether monomers were synthesized by the addition reaction of glycidyl vinyl ether ( 1 ) with various silyl dichlorides using tetra-n-butylammonium bromide (TBAB) as a catalyst. The reaction of 1 with diphenyl dichlorosilane gave bis-[1-(chloromethyl)-2-(vinyloxy)-ethyl]diphenyl silane ( 3a ) in 89% yield. Polycondensations of 3a with terephthalic acid were also carried out using 1,8-Diazabicyclo[5.4.0]-7-undecene (DBU) to afford silicon-containing polyfunctional vinyl ether oligomers ( 5 ). A multifunctional Si-monomer with both vinyl ether and methacrylate groups ( 7 ) was prepared by the reaction of 3a with potassium methacrylate using TBAB as a phase transfer catalyst. Photoinitiated cationic polymerizations of these vinyl ether compounds proceeded rapidly using the sulfonium salt, bis-[4-(diphenyl-sulfonio)phenyl]sulfide-bis-hexafluorophoshate (DPSP), as the cationic photoinitiator in neat mixtures upon UV irradiation. Multifunctional monomer 7 with both vinyl ether and methacrylate groups showed “hybrid curing properties” using both DPSP and the radical photoinitiator, 2,4,6-trimethylbenzoyl diphenylphoshine oxide (TPO). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3217–3225, 1997     

The synthesis and cationic polymerization of multifunctional silicon-containing epoxy monomers and oligomers

Several series of multifunctional silicon-containing epoxide monomers and oligomers have been prepared using rhodium catalyzed hydrosilation reactions. Dialkyl and diarylsilanes can be condensed with vinyl epoxides to give high yields of the desired diepoxides while the hydrosilation of alkyl and aryl silanes yields a mixture of di and tri epoxy substituted products. The condensation of αω,? Si? H difunctional compounds with vinyl epoxides can be carried out regioselectively to give α-hydrogen-ω-epoxy intermediates, which can be further reacted with di and tri olefins bearing terminal double bonds to give a series of well characterized epoxy functional oligomers. An investigation of the photoinitiated cationic polymerization of the monomers and oligomers, which were prepared during the course of these studies, was carried out. © 1994 John Wiley & Sons, Inc.     

Thermal properties and combustion behaviors of a novel UV-curable flame retarded coating containing silicon and phosphorus

A silicon-based acrylate (SHEA) was synthesized via the reaction between 2-hydroxylethyl acrylate and dimethyldichlorosilane, and characterized by Fourier transform infrared (FTIR), ¹H NMR spectroscopy and ²⁹Si NMR spectroscopy. The SHEA was blended with phosphorus-containing tri(acryloyloxyethyl) phosphate (TAEP) at different ratios to obtain a series of UV-curable flame retarded resins. The final unsaturation conversion of the SHEA films was determined by FTIR. Their combustion behaviors were examined by microscale combustion calorimetry (MCC). The thermal degradations of TAEP/SHEA composites were characterized using thermogravimetric analysis/infrared spectrometry (TG–IR). The MCC results present that the addition of TAEP into SHEA was able to decrease the HRR, HRC, T_max and THC. Among the TAEP/SHEA resins, Si1 (TAEP:SHEA is 1:1) owns the highest initial decomposition temperature and leaves the most char residue at 800 °C. The change of chemical structure during the thermal degradation process was monitored by real-time FTIR analysis to study the condensed-phase flame retarded mechanism.     

Thermal stability and degradation of meso-tetraphenylporphyrins bearing nitrogen-containing substituents

Journal of Thermal Analysis and Calorimetry - Porphyrins have exquisite photophysical and electronic properties that enable their use in photodynamic therapy. Even though the thermodynamic behavior...