Vanillin–Schiff’s bases as organic thermal stabilizers and co-stabilizers for rigid poly(vinyl chloride)

Vanillin–Schiff’s bases (VSB) were examined as thermal stabilizers and co-stabilizers for rigid poly(vinyl chloride) (PVC) in air at 180 °C. Their high stabilizing efficiency were shown by their high thermal stability value (Ts), which is the time elapsed for the detection of HCl gas, if compared with dibasic lead carbonate and cadmium–zinc soap reference stabilizers used industrially, with better extent of discoloration. Blending these derivatives with reference stabilizers in different ratios greatly lengthens the thermal stability and the extent of discoloration of the PVC.Condensation products of Vanillin with amines are very active biologically, besides having good complexation ability with metal ions. The Ni²⁺ and Co²⁺ complexes of VSB derivatives gave better thermal stability and less discoloration than the parent organic stabilizer. Also, blending these complexes with either of the used reference stabilizers in different ratios gave better thermal stability and lower extent of discoloration. Thermogravimetric analysis confirmed the improved stability of PVC in the presence of the VSB derivatives, compared to blank PVC, PVC stabilized with reference stabilizers and PVC stabilized with binary mixture of VSB derivatives with reference stabilizer.The stabilizing efficiency of Vanillin–Schiff’s base (VSB) derivatives is attributed to the replacement of the labile chlorine atoms on the PVC chains by a relatively more stable moiety of the organic stabilizer.     

Organic thermal stabilizers for rigid poly(vinyl chloride). Part XIII: Eugenol (4-allyl-2-methoxy-phenol)

Eugenol (4-allyl-2-methoxy-phenol) has been examined as a thermal stabilizer and co-stabilizer for rigid PVC in air, at 180 °C. Its high stabilizing efficiency is detected by its high thermal stability value (Ts) when compared with some of the common reference stabilizers used industrially such as dibasic lead carbonate, calcium-zinc soap and octyl tin mercaptide.Blending this organic stabilizer with some of the reference stabilizers in different ratios had synergistic effect on both the induction period and the dehydrochlorination rate together with the longer extent of discolouration of PVC stabilized by eugenol as compared with the blank and the samples stabilized with reference commercial stabilizers.A probable mechanism for the stabilizing action of eugenol has been proposed. The stabilizing efficiency is attributed partially to the stabilizer's ability to intervene in the radical chain degradation process of PVC and to the replacement of the labile chlorine atoms on PVC chains by a relatively more stable moiety of the organic stabilizer.     

Organic thermal stabilizers for rigid poly(vinyl chloride). Part XI: Anthraquinone derivatives

Anthraquinone and 1-aminoanthraquinone derivatives have been examined as thermal stabilizers or co-stabilizers for rigid PVC in air, at 180 °C. Their high stabilizing efficiency is detected by their high induction period values (Ts) when compared with some of the common reference stabilizers used industrially such as dibasic lead carbonate, calcium-zinc soap and octyl tin mercaptide. Blending these organic stabilizers with some of the reference stabilizers in different ratios had synergistic effect on both the induction period and the dehydrochlorination rate.A probable mechanism for the stabilizing mode of these derivatives has been proposed. The stabilizing efficiency is attributed partially to the stabilizers' ability to intervene in the radical chain degradation process of PVC and to the replacement of the labile chlorine atoms on PVC chains by a relatively more stable moiety of the organic stabilizer.     

Organic thermal stabilizers for rigid poly(vinyl chloride). Part XII: N-phenyl-3-substituted-5-pyrazolone derivatives

N-phenyl-3-substituted-5-pyrazolone derivatives have been examined as thermal stabilizers or co-stabilizers for rigid PVC in air, at 180 °C. Their high stabilizing efficiency is detected by their high induction period values (T_s) when compared with some of the common reference stabilizers used industrially, such as dibasic lead carbonate, calcium-zinc soap and n-octyl tin mercaptide. Blending these derivatives with some of the reference stabilizers in different ratios had a synergistic effect on both the induction period and the dehydrochlorination rate.A probable mechanism for the stabilizing mode of N-phenyl-3-substituted-5-pyrazolone derivatives has been proposed. The stabilizing efficiency is attributed at least partially to the ability of the organic stabilizer to be incorporated in the polymeric chains, thus disrupting the chain degradation.     

Synthesis, characterization and application of enrofloxacin complexes as thermal stabilizers for rigid poly(vinyl chloride)

Synthesis and characterization of both binary Co(II)- (1), Ni(II)- (2) complexes with enrofloxacin drug (HL(1)) and ternary Co(II)- (3), Ni(II)- (4) complexes in presence of DL-alanine (H(2)L(2)) are reported using physico-chemical techniques. The antimicrobial activity of these complexes has been screened against two gram-positive and two gram-negative bacteria. Antifungal activity against two different fungi has been evaluated and compared with reference drug. All the binary and ternary complexes showed remarkable potential antimicrobial activity higher than the recommended standard agents. Ni(II)-complexes exhibited higher potency as compared to the parent drug against bacterial and fungal strain. In addition, it was of interest to investigate the reported complexes as thermal stabilizers and co-stabilizers for rigid PVC in air at 180 °C. Their high stabilizing efficiency is detected by their high induction period values (T(s)) compared with some of the common reference stabilizers used industrially, such as dibasic lead carbonate (DBLC) and calcium-zinc soap. Blending these complexes with some of the reference stabilizers in different ratios had a synergistic effect on both induction period as it gave better thermal stability and lower extent of discoloration. The stabilizing efficiency is attributed at least partially to the ability of the metal complex stabilizer to be incorporated in the polymeric chains, thus disrupting the chain degradation and replace the labile chlorine atoms on PVC chains by a relatively more s moiety of the inorganic stabilizer. Their amenability to use as a biomedical additives for PVC, has afforded them great potential for various medical applications.     

Hydroxylbenzylthioethers as novel organic thermal stabilizers for rigid PVC

An investigation was carried out on the performances of hydroxylbenzylthioethers employed as organic thermal stabilizers for rigid poly(vinyl chloride). The efficiency of these compounds as thermal stabilizers was evaluated by using Haake polydrive mixer and TGA. The stabilizing efficiency was compared with Ca-Zn soap and methyltin stabilizer. Hydroxylbenzylthioethers exhibit greater efficiency than both of these stabilizers. This is attributed to the ability of these compounds to prevent the formation of polyene sequences. The hydroxylbenzylthioethers-stabilized PVC showed a slightly lower glass transition temperature (T_g) in comparison with the original PVC. Hydroxylbenzylthioethers and epoxidized soybean oil (ESBO) exhibit synergistic effect on the stabilizing effect, when the mass ratios of ESBO to hydroxylbenzylthioethers are less than 0.5.     

Novel antimicrobial organic thermal stabilizer and co-stabilizer for rigid PVC

Biologically active N-benzoyl-4-(N-maleimido)-phenylhydrazide (BMPH) was synthesized and its structure was confirmed by elemental analysis and various spectral tools. It was examined as a thermal stabilizer and co-stabilizer for rigid poly (vinyl chloride) at 180 °C in air. Blending BMPH with reference samples in different ratios greatly lengthens the thermal stability value and improves the extent of discoloration of PVC. TGA confirmed the improved stability of PVC in presence of the investigated organic stabilizer. GPC measurements were done to investigate the changes occurred in the molecular masses of the degraded samples of blank PVC and PVC in presence of the novel stabilizer. BMPH showed good antimicrobial activity towards two kinds of bacteria and two kinds of fungi.     

Synergistic effect of maleimido phenyl urea derivatives mixed with some commercial stabilizers on the efficiency of thermal stabilization of PVC

Four novel antimicrobial maleimido phenyl urea stabilizers 1–4 were synthesized from N-[4-(chlorocarbonyl) phenyl] maleimide with phenyl urea and its derivatives (p-methyl, o-chloro and p-carboxy). The effect of mixing maleimido phenyl urea stabilizer 2 with each of the reference stabilizers, dibasic lead carbonate (DBLC), cadmium-barium-zinc stearate (Cd-Ba-Zn stearate) or n-octyltin mercaptide (n-OTM), on the stabilization efficiency in thermal degradation of rigid PVC at 180 °C in air, has been investigated. Mixing was effected in the range of 0–100 wt% of stabilizer 2 relative to each of the reference stabilizers. The stabilizing efficiency was evaluated by measuring the length of the thermal stability period (Ts), the period during which no detectable amount of hydrogen chloride gas could be observed, and also from the rate of dehydrochlorination as measured by continuous potentiometric determination, and by the extent of discoloration of the degraded polymer samples. The results show a true synergistic effect from the combination of stabilizer 2 with any of the reference stabilizers. Mixing of the stabilizers improves the Ts values, decreases the rate of dehydrochlorination and lowers the extent of discoloration of the polymer. The maximum synergism was attained when stabilizer 2 is mixed with either of the three reference stabilizers in equivalent weight ratio (50%/50%). The observed synergism may be attributed to the different mechanisms by which the investigated and the reference stabilizers work.     

Thermal degradation behaviour of poly(vinyl chloride) in the presence of poly(N′-acryloyl benzhydrazide)

The thermal degradation behaviour of poly(vinyl chloride), PVC, in the presence of poly(N′-acryloyl benzhydrazide), PABH, has been studied using continuous potentiometric determination of the evolved hydrogen chloride gas from the degradation and by measuring the extent of discoloration of the degraded samples. Blending this polymeric additive with dibasic lead carbonate, DBLC, reference stabilizer in different ratios had synergistic effects on both the thermal stability and the extent of discoloration of PVC.     

Synthesis, characterization, and thermal investigation of some transition metal complexes of benzopyran-4-one Schiff base as thermal stabilizers for rigid poly(vinyl chloride) (PVC)

New metal complexes of Schiff base (PB) prepared from condensation reaction of 2-aminopyridine and 6-formyl-5,7-dihydroxy-2-methylbenzopyran-4-one with metal ions; Mn(II), Co(II), Ni(II), and Cu(II) are prepared. Different analysis tools like elemental analyses, FTIR, thermal analysis, conductivity, electronic spectra, and magnetic susceptibility measurements are all used to elucidate the structures of the newly prepared metal complexes. The free Schiff base (PB) has been examined as thermal stabilizer and co-stabilizer for rigid PVC in air, at 180 °C. Its high stabilizing efficiency is detected by its high induction period value (T _s) when compared with some of the common reference stabilizers used industrially, such as dibasic lead carbonate and calcium–zinc stearate (Ca–Zn soap). Blending Schiff base or its metal complexes with Mn(II), Co(II), Ni(II), and Cu(II) ions with the reference stabilizers in different ratios had a synergistic effect on the induction period (thermal stability). The stabilizing efficiency is attributed at least partially to the ability of the stabilizer to be incorporated in the polymeric chains, thus disrupting the chain degradation process.     

N-(Substituted phenyl)itaconimide-phenyl salicylate blends as organic stabilizers for plasticized poly(vinyl chloride) against photo-degradation

The effect of blending some N-(substituted phenyl)itaconimide derivatives, N-(RPh)II, (R: -H, or -OMe) with phenyl salicylate UV absorber on the stabilizing efficiency in photo-degradation of PVC plasticized with dioctyl phthalate (DOP) has been investigated. Blending was effected in the range of 0-100 wt% of the itaconimide relative to reference stabilizer. The stabilizing efficiency was evaluated by measuring the length of the induction period (Ts), the period during which no detectable amounts of hydrogen chloride gas could be observed, and also from the rate of dehydrochlorination as measured by continuous potentiometric determination on one hand, and the extent of discoloration of the degraded polymer on the other. The efficiencies are also evaluated by determining the amount of gel formation as well as the intrinsic viscosity of the insoluble and the soluble fractions of the degraded polymer. The results show a true synergistic effect from the blending of itaconimide derivative with phenyl salicylate UV absorber. Blending of the stabilizers improves the Ts values, decreases the rate of dehydrochlorination, and lowers the extent of discoloration and the gel content of the polymer. The synergism attains its maximum when both the itaconimide and the reference stabilizers are taken in equimolar ratios. The observed synergism may be attributed to the combination of mechanisms by which the itaconimide and the reference stabilizer work.     

Efficiency and mechanism for the stabilizing action of thiouracil derivatives as novel thermal stabilizers for poly(vinyl chloride) and the synergistic effect with calcium stearate

Novel thiouracil thermal stabilizers for rigid poly(vinyl chloride) (PVC), 6-methyl-2-thiouraci (6M2TU), 5-methyl-2-thiouraci (5M2TU), and 6-propyl-2-thiouraci (6P2TU) were synthesized successfully via a precipitation method, and characterized with 1H NMR spectra. Investigation of these thiouracil derivatives as thermal stabilizers for poly(vinyl chloride) (PVC) was measured by thermogravimetric analysis (TGA), congo red test, fourier transform infrared (FTIR), and discoloration test. The results show that the thiouracil derivatives have strong ability to replace the labile chlorine atoms in PVC chains, but weak ability to absorb hydrogen chloride. Moreover, PVC stabilized with these thiouracil derivatives and calcium stearate (CaSt₂) exhibit greater stabilizing efficiency compared with traditional Ca/Zn stabilizers with the same concentration.     

An infra-red spectroscopic study of the stabilization of poly(vinyl chloride) by zinc and calcium stearates

An i.r. spectroscopic investigation into the thermal stabilization of PVC by calcium and zinc metal soap systems has yielded new information on the role of these stabilizers. Complexation of the metal stearates occurs prior to gelation. Esterification of the polymer can also occur prior to gelation if “free” zinc stearate is present. After gelation, the stabilizing mixture acts primarily as an HCl acceptor irresective of the $\text{Ca}\text{Zn}$ ratio. The chemical and physical properties imparted to the matrix by the additives determine the rate of thermal degradation during processing in the Haake rheocorder.     

Improvement of Structural and Thermal Stabilities of PVC and Wood/PVC Composite by Zn and Pb Stearates,and Zeolite

Three different chemical stabilizers were introduced into neat PVC and a wood/PVC composite (containing 50 phr wood flour) to improve their thermal and structural stabilities. The changes in CIE yellowness index, polyene index, %wt loss, and decomposition temperature (T_d) were monitored. The effects of type and content of thermal stabilizers, thermal ageing time, and the presence of wood flour were our main interests. The experimental results suggested that the additions of Zn and Pb stearates into PVC and wood/PVC composite could improve the thermal stability of the PVC. At the test temperature of 177°C, the additions of Zn and Pb stearates could improve the thermal stabilities of PVC by retarding the upzipped reaction and by reducing the conjugated double bonds in PVC, Pb stearate being the most suitable for thermally stabilizing the PVC. Around the T_d range (～264°C), the addition of Zn stearate reduced the T_d value of PVC whereas that of Pb stearate had no effect on the change in T_d value. Zeolite loading could shift the T_d value of the PVC from 264 to 280°C. The addition of wood particles increased the polyene content and decreased the decomposition temperature of the PVC. The effect of wood flour on the thermal and structural changes of PVC overruled that of thermal stabilizer loading.     

Anthraquinone derivatives as organic stabilizers for rigid poly(vinyl chloride) against photo-degradation

Anthraquinone derivatives have been prepared and investigated as photo-stabilizers for rigid PVC by measuring the extent of weight loss (%), the amount of gel formation as well as the intrinsic viscosity of the soluble fractions of the degraded polymer. The results indicated a reasonable stabilizing effect of these derivatives compared with UV-commercially used stabilizers. A synergistic effect is achieved when the anthraquinone derivatives are mixed with UV-absorbers in a weight ratio of 75% of investigated organic stabilizer and 25% of reference stabilizer.A probable radical mechanism is proposed to account for the stabilizing action of the organic investigated materials.     

Effect of thermal stabilizers composed of zinc barbiturate and calcium stearate for rigid poly(vinyl chloride)

Zinc barbiturate [Zn(H₂L)₂·2H₂O, abbreviated as ZnL₂] was synthesized by a precipitation method in aqueous solution, and investigated as a co-stabilizer with calcium stearate (CaSt₂) for rigid poly(vinyl chloride) (PVC) by the discoloration test and the dehydrochlorination test at 180 °C. ZnL₂ exhibits high stabilizing effect with excellent initial colour of PVC films. In comparison with the synergistic effect of CaSt₂/ZnSt₂ stabilizers, the CaSt₂/ZnL₂ stabilizers in mass ratios ranging from 0.3/1.2 to 0.6/0.9 exhibit better synergistic effect. Moreover, PVC films stabilized by CaSt₂/ZnL₂ show better initial colour with the addition of dibenzoyl methane as an auxiliary stabilizer. The mechanism of stabilizing action of ZnL₂ is also proposed. ZnL₂ may replace the labile chlorine atoms to interrupt the formation of conjugated double bonds in PVC chains, and act as the absorber of hydrogen chloride to restrain the self-catalytic dehydrochlorination.     

Antimicrobial agents as photostabilizers for rigid poly(vinyl chloride)

Some amide derivatives of ethylene glycol‐bis(2‐aminoethylether)‐N,N,N^′,N^′‐tetraacetic acid (EGTA) have been prepared via their coupling with different aniline derivatives: amino, methyl, chloro, and hydroxy aniline. The EGTA amide derivatives were characterized, and their antimicrobial activities were evaluated. These antimicrobial agents have been investigated as photostabilizers for rigid poly(vinyl chloride) (PVC), suspension PVC, with a K value of 70. Their stabilizing efficiencies were evaluated by determining the percentage of weight loss, the intrinsic viscosities, as well as the amount of formed gel of the photodegraded PVC. The extent of discoloration and the change in the mechanical properties of the photodegraded polymer were also evaluated. The applied materials reduced the loss in weight that resulted from HCl evolution during photodegradation. Both viscosity and gel content measurements showed also a decrease in their values during the degradation process. The decrease in the percentage of gel formation upon applying the investigated photostabilizers reflects the lowering in extent of cross‐linking of the polymer, which implies preserving the mechanical properties of PVC. The extent of discoloration was also improved in the presence of the investigated compounds. The results have proved a greater stabilizing efficiencies of the antimicrobial EGTA amide derivatives than that of the phenyl salicylate ultraviolet (UV) absorber, which is commonly used as an industrial stabilizer. A radical mechanism was proposed to account for the stabilizing action of the investigated products. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparative studies on a mesophilic and a thermophilic α-amylase

A comparative study was performed on thermal stability of mesophilic and thermophilic α-amylases, and the effects of various denaturing agents, organic solvents, and stabilizers were investigated. As expected, the thermophilic enzyme showed higher resistance toward denaturation in water as its natural medium, but such a difference could not be detected in nonaqueous environments. Furthermore, stability of these molecules was improved by including various stabilizing agents. Of the compounds tested, sorbitol provided the highest degree of protection, which was found to be owing to its effect on increasing T _m and its ability in totally preventing deamidation of amino acid residues in the protein molecules.     

Effect of pentaerythritol and organic tin with calcium/zinc stearates on the stabilization of poly(vinyl chloride)

The stabilization effect of calcium and zinc stearates (CaSt₂/ZnSt₂) combined with pentaerythritol (PeE) and organic tin on poly(vinyl chloride) was investigated. The results show that the addition of calcium/zinc stearates combined with PeE and organic tin can improve thermal and colour stability of poly(vinyl chloride) in both static and dynamic tests. Mechanisms for improving stability of PVC are also discussed. The increase of stabilizing effectiveness of calcium/zinc stearates is ascribed to the synergistic effect between CaSt₂/ZnSt₂ and PeE and the interaction between organic tin and double bonds formed during the degradation of PVC. There is no synergistic action between organic tin and PeE or organic tin and calcium/zinc stearates.     

聚氯乙烯的有机辅助热稳定剂的研究进展

聚氯乙烯(PVC)的有机辅助稳定剂包括含N有机稳定剂、含P有机稳定剂、含O有机稳定剂、含S有机稳定剂等四种类型。其中含O有机稳定剂和含S有机稳定剂对改善PVC初期着色和长期稳定性效果显著,是PVC的有机辅助稳定剂发展的重要方向。文章介绍了PVC的有机辅助稳定剂的作用机理及应用进展。