Cloud point extraction: an alternative to traditional liquid-liquid extraction for lanthanides(III) separation

Cloud point extraction (CPE) was used to extract and separate lanthanum(III) and gadolinium(III) nitrate from an aqueous solution. The methodology used is based on the formation of lanthanide(III)-8-hydroxyquinoline (8-HQ) complexes soluble in a micellar phase of non-ionic surfactant. The lanthanide(III) complexes are then extracted into the surfactant-rich phase at a temperature above the cloud point temperature (CPT). The structure of the non-ionic surfactant, and the chelating agent-metal molar ratio are identified as factors determining the extraction efficiency and selectivity. In an aqueous solution containing equimolar concentrations of La(III) and Gd(III), extraction efficiency for Gd(III) can reach 96% with a Gd(III)/La(III) selectivity higher than 30 using Triton X-114. Under those conditions, a Gd(III) decontamination factor of 50 is obtained.     

Cloud-point extraction of rhodamine 6G by using Triton X-100 as the non-ionic surfactant

Cloud-point extraction (CPE) using the non-ionic surfactant Triton X-100 was used successfully to remove a highly toxic dye, rhodamine 6G (R6G), from water and wastewater. The effects of different analytical parameters such as pH, concentration of Triton X-100 (TX-100) and salts, equilibrium temperature, and incubation time on the efficiency of the extraction of R6G were studied in detail, and optimum conditions for dye extraction were obtained. Thermodynamic parameters including changes in Gibbs free energy, enthalpy, and entropy were also calculated, and these parameters indicated that the CPE of R6G was feasible, spontaneous, and endothermic in the temperature range of 75-95 degrees C. The equilibrium solubilization capacity of TX-100 was found to be 1.10 mmol/mol by using Langmuir isotherm models. No significant interference effects were observed in the presence of phenol and its derivatives, some acidic and basic dyes and most of the anions and cations. It was concluded that the CPE process described in this paper can be an alternative technique for removal of dyes and other pollutants from waters and wastewaters.     

浊点萃取-分光光度法测定自来水及酒类样品中的痕量铁

利用非离子表面活性剂TritonX-100在温度高于其浊点时形成相分离行为,建立了浊点萃取-分光光度法测定痕量铁的新方法,探讨优化了以KSCN为显色剂,TritonX-100浊点萃取富集痕量铁的实验条件.研究发现:加入正辛醇可使TritonX-100的浊点降低约30℃,有利于萃取实验的进行;同时,加入的正辛醇与TritonX-100对痕量铁起到了协同萃取作用.在优化了的实验条件下,进行了痕量铁的分析,检出限为0.02mg·L-1,加标回收率为97.4%～101.6%,应用于自来水及酒类样品中痕量铁的测定,结果满意.     

Determination of cadmium(II) ion by atomic absorption spectrometry after cloud point extraction

In this work, cloud point extraction (CPE) technique was developed for the separation and pre-concentration of Cd(II). CPE was used with lipophilic hexadentate (N₄O₂) Schiff base ligand, L_22pysa (1, C₂₄H₂₆N₄O₂). The methodology is based upon the formation of a Cd(II)/L complex soluble in a micellar phase the non-ionic surfactant Triton X-114. This complex is then extracted into the surfactant-rich phase above its cloud point temperature. Several important variables that affect the CPE were investigated and optimized. Under the optimum experimental conditions, the calibration graph was linear over the range 1?C100?ng?mL^?1 with a correlation coefficient of 0.9997. The detection limit obtained under optimum conditions was 0.44?ng?mL^?l. The proposed method was successfully applied to the determination of Cd(II) in rice and various water samples.     

Cloud point and solid phase extraction of vanadium in surface and bottled mineral water samples using 8-hydroxyquinoline as a complexing reagent

Cloud point extraction (CPE) and solid phase extraction (SPE) methods were developed for the determination of ??g l^?1 of vanadium ions in surface, tap and bottled mineral water samples, based on the rapid reaction of vanadium(V) with 8- hydroxyquinoline (8-quinolinol) at pH 3?C5. Both the sensitive extraction methods were successfully employed for the preconcentration of V in real samples. For CPE, V complexed with 8-quinolinol and then was entrapped in non-ionic surfactant Triton X-114, while for SPE, V was adsorbed on XAD -2 impregnated with 8-quinolinol. The experimental conditions for SPE (pH, eluent, and contact time between the liquid sample and the resin) and CPE (pH of sample solution, concentration of 8- quinolinol and Triton X-114, equilibration temperature and time period for shaking) were investigated in detail. The validity of SPE/CPE of V was checked by certified reference material of water (SRM-1643e). The extracted surfactant-rich phase (200 ??l) was mixed with 200 ??l of HNO₃ in ethanol and this final volume was injected into electrothermal atomic absorption spectrometry with different modifiers. Under these conditions, the preconcentration of 25 ml sample solution allowed the raising of an enrichment factor of 100 and 10 folds for CPE and SPE, respectively. The concentration of V in surface water (river and lake), tap water and bottled mineral water samples was found to be in the range of 1.30?C19.9, 1.05?C5.25 and 0.67?C1.21 ??g l^?1, respectively.     

Cloud point extraction of lanthanide(III) ions via use of Triton X-100 without and with water-soluble calixarenes as added chelating agents

The use of water-soluble calixarenes: p-sulfonato thiacalixarene (ST), tetra-sulfonatomethylated calix[4]resorcinarene (SR), calix[4]resorcinarene phosphonic acid (PhR) as chelating agents in cloud point extraction (CPE) of La(III), Gd(III) and Yb(III) ions using Triton X-100 as non-ionic surfactant is introduced. The data obtained indicate that both complexation ability and structure of calixarenes govern the extraction efficiency of lanthanides. In particular ST and SR, forming 1:1 lanthanide complexes with similar stability in aqueous media, exhibit different extractability when used as chelating agents in CPE. First synthesized PhR was found to be the most efficient chelating agent exhibiting pH-dependent selectivity within La(III), Gd(III) and Yb(III) in CPE.     

Cloud Point Extraction Preconcentration of Trace Cadmium as 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone Complex and Determination by Flame Atomic Absorption Spectrometry

A new method for the determination of trace cadmium in water samples by flame atomic absorption spectrometry (FAAS) after cloud point extraction (CPE) is proposed. The method is based on the complexation of Cd with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) in the presence of non-ionic micelles of Triton X-100. The effect of experimental conditions such as pH, concentration of chelating agent and surfactant, equilibration temperature and time on cloud point extraction was studied. Under the optimum conditions, the detection limits are 0.64 ng mL^±1 with relative standard deviations (RSDs) of 2.1% (n = 10). The proposed method was applied to the determination of trace cadmium in water samples with satisfactory results.     

Design of rapidly synergistic cloud point extraction of ultra-trace lead combined with flame atomic absorption spectrometry determination

In this work, traditional cloud point extraction (CPE) pattern was changed and improved by the proposed rapidly synergistic CPE. Using octanol as cloud point revulsant and synergic reagent, non-ionic surfactant Triton X-114 (TX-114) accomplished room temperature extraction rapidly without heating in water bath. The improved extraction was named as rapidly synergistic cloud point extraction (RS-CPE). Compared with traditional CPE, RS-CPE was accomplished in 1 min with considerably high extraction efficiency. The improved CPE pattern was coupled with flame atomic absorption spectrometry (FAAS) for the extraction and detection of trace lead in real and certified water samples with satisfactory analytical results. The proposed method greatly improved the sensitivity of FAAS for the determination of lead. Under the optimal conditions, the limit of detection (LOD) for lead was 4.3 μg/L, with enhancement factor (EF) of 39. Factors influencing RS-CPE efficiency, such as concentrations of surfactant TX-114 and octanol, concentration of chelating agent, pH, conditions of phase separation, environmental temperature, salt effect and instrumental conditions, were studied systematically.     

Simultaneous cloud-point extraction of nine cations from water samples and their determination by flame atomic absorption spectrometry.

The cloud-point methodology was successfully employed for the preconcentration of heavy metal cations at trace levels from aqueous samples prior to flame atomic absorption spectrometry (FAAS). Cations were taken into a complex with 8-quinolinol in an aqueous non-ionic surfactant, Triton X-114, medium and concentrated in the surfactant rich phase by bringing the solution to the cloud-point temperature. The preconcentration of only 100 mL of the solution with 1% Triton X-114 and 10(-3) M 8-quinolinol at pH 7.0 gave a preconcentration factor higher than 100 for most cations. Under these conditions, the detection limits of the cloud-point extraction-FAAS system were 0.8 - 15 microg/L.     

Screening of urinary coproporphyrin using cloud point extraction and chemiluminescence detection

A simple screening test was developed for the sensitive and selective measurement of urinary coproporphyrin. In this screening test, efficient and selective extraction/pre-concentration of coproporphyrin from the aqueous medium(urine) into a much smaller volume phase containing a common non-ionic surfactant (Triton X-100) and ethyl acetate was accomplished by the addition of a relatively large amount of a cloud point depressing electrolyte (K(3)PO(4)) into the sample solution to effect cloud point separation. Sensitive and selective detection of coproporphyrin in the mixed Triton X-100 and ethyl acetate phase was performed via chemical excitation using the peroxyoxalate chemiluminescence reaction. The effects of surfactant and cations (from the cloud point depressing electrolyte) on the chemiluminescence intensity of coproporphyrin were briefly investigated. Furthermore, the spectrum of urinary coproporphyrin obtained using the present chemiluminescence method was briefly compared with that obtained from fluorescence method.     

Spectrophotometric determination of paracetamol in urine with tetrahydroxycalix[4]arene as a coupling reagent and preconcentration with triton X-114 using cloud point extraction

In the present paper, conventional spectrophotometry in conjunction with cloud point extraction-preconcentration were investigated as alternative methods for paracetamol (PCT) assay in urine samples. Cloud point extraction (CPE) was employed for the preconcentration of p-aminophenol (PAP) prior to spectrophotometric determination using the non-ionic surfactant Triton X-114 (TX-114) as an extractant. The developed methods were based on acidic hydrolysis of PCT to PAP, which reacted at room temperature with 25,26,27,28-tetrahydroxycalix[4]arene (CAL4) in the presence of an oxidant (KIO(4)) to form an blue colored product. The PAP-CAL4 blue dye formed was subsequently entrapped in the surfactant micelles of Triton X-114. Cloud point phase separation with the aid of Triton X-114 induced by addition of Na(2)SO(4) solution was performed at room temperature as an advantage over other CPE assays requiring elevated temperatures. The 580 nm-absorbance maximum of the formed product was shifted bathochromically to 590 nm with CPE. The working range of 1.5-12 mug ml(-1) achieved by conventional spectrophotometry was reduced down to 0.14-1.5 mug ml(-1) with cloud point extraction, which was lower than those of most literature flow-through assays that also suffer from nonspecific absorption in the UV region. By preconcentrating 10 ml sample solution, a detection limit as low as 40.0 ng ml(-1) was obtained after a single-step extraction, achieving a preconcentration factor of 10. The stoichiometric composition of the dye was found to be 1 : 4 (PAP : CAL4). The impact of a number of parameters such as concentrations of CAL4, KIO(4), Triton X-100 (TX-100), and TX-114, extraction temperature, time periods for incubation and centrifugation, and sample volume were investigated in detail. The determination of PAP in the presence of paracetamol in micellar systems under these conditions is limited. The established procedures were successfully adopted for the determination of PCT in urine samples. Since the drug is rapidly absorbed and excreted largely in urine and its high doses have been associated with lethal hepatic necrosis and renal failure, development of a rapid, sensitive and selective assay of PCT is of vital importance for fast urinary screening and antidote administration before applying more sophisticated, but costly and laborious hyphenated instrumental techniques of HPLC-SPE-NMR-MS.     

Determination of trace uranyl ions in aquatic medium by a useful and simple method

Determination of trace uranyl ions was performed by using mixed micellar system and spectrophotometric determination. The method is based on cloud point extraction of uranyl ions after formation of an ion-association complex in the presence of Celestine Blue and sodium dodecyl sulfate. Then, the formed complex was extracted to non-ionic surfactant phase of Triton X-114 at pH 8.0. The optimal extraction and reaction conditions (e.g. concentrations and types of surfactants, concentration of complex forming agent, incubation conditions) were studied and analytical characteristics of the method (e.g. limit of detection, linear range, pre-concentration factor) were obtained by experimental studies. Linearity was obeyed in the range of 50–1,500 ng mL^?1 for uranium(VI) ion and the detection limit of is 14.20 ng mL^?1. The interference effects of common ions were also tested and validation studies were performed by using recovery test. The method was applied to the determination of uranium(VI) in several real samples.     

Salting-out surfactant extraction of porphyrins and metalloporphyrin from aqueous non-ionic surfactant solutions

A number of cloud point temperature-depressing electrolytes have been investigated for the separation of a non-ionic surfactant (Triton X-100) from aqueous solutions and the corresponding extraction of the organic solutes into the smaller volume surfactant-rich phase using the salting-out method. High extraction efficiencies and preconcentration factors were obtained at room temperature for the extraction of several hydrophilic and hydrophobic metal-free porphyrins (uroporphyrin, coproporphyrin, protoporphyrin and hematoporphyrin) and one metalloporphyrin (iron-protoporphyrin) that were dissolved in the aqueous non-ionic surfactant solutions. Possible mechanisms responsible for the efficient extraction of these important biological molecules into the surfactant-rich layer are discussed.     

Cloud point extraction and spectrophotometric determination of codeine in pharmaceutical and biological samples

Cloud point extraction process using non-ionic surfactant, Triton X-114, to extract codeine from aqueous solution was investigated. The method was based on the extraction of codeine and bromothymol blue from acetate buffer media to surfactantrich phase and formed a charge transfer-ion pair complex. The extracted surfactant-rich phase was diluted with ethanol and its absorbance was measured at 430 nm. The effect of different variables such as pH, Triton X-114 concentration, cloud point temperature and time was established. The calibration graph was linear in a wide range of 100–700 ng ml^?1 of codeine with r = 0.998 (n = 7). The detection limit based on three times standard deviation of the blank (3s) was 4.6 ng ml^?1 and relative standard deviation (R.S.D) is 2.15% for 500 ng ml^?1 codeine (n = 5). The proposed method was applied to the determination of codeine in acetaminophen codeine tablets and blood samples.     

Cloud point extraction and graphite furnace atomic absorption spectrometry determination of manganese(II) and iron(III) in water samples

Cloud point extraction (CPE) was applied as a preconcentration step prior to graphite furnace atomic absorption spectrometry (GFAAS) determination of manganese(II) and iron(III) in water samples. After complexation with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP), the analytes could be quantitatively extracted to the phase rich in the surfactant p-octylpolyethyleneglycolphenylether (Triton X-100) and be concentrated, then determined by GFAAS. The parameters affecting the extraction efficiency, such as solution pH, concentration of PMBP and Triton X-100, equilibration temperature and time, were investigated in detail. Under the optimum conditions, preconcentration of 10 ml of sample solution permitted the detection of 0.02 ng ml(-1) of Mn(II) and 0.08 ng ml(-1) of Fe(III) with enrichment factors of 31 and 25 for Mn(II) and Fe(III), respectively. The proposed method was applied to determination of trace manganese(II) and iron(III) in water samples with satisfactory results.     

Determination of trace vanadium in sea cucumbers by ultrasound-assisted cloud point extraction and graphite furnace atomic absorption spectrometry

An ultrasound-assisted cloud point extraction (CPE) procedure was used for preconcentration and determination of vanadium by graphite furnace atomic absorption spectrometry. The vanadyl(IV) complex with ascorbic acid form a hydrophobic complex with 4-(2-pyridylazo) resorcinol (PAR) in a micelle medium, which is stable under our working conditions, and followed by its extraction into Triton X-100 surfactant-rich phase. The main factors affecting CPE efficiency, such as pH, concentrations of PAR, ascorbic acid and Triton X-100, incubation temperature, frequency and equilibration time of ultrasonic bath were investigated in detail. Under the optimum conditions, preconcentration of 10 mL sample gave a preconcentration factor of 36.4 and a detection limit of 4.0 µg kg^?1. The proposed method was successfully applied to determination of vanadium in sea cucumbers with satisfactory results.     

Self-Assembled Supramolecular Micellar Structures Based on Non-ionic Surfactants and Cyclodextrins

The complexation between non-ionic polyethylene oxide (PEO)-based surfactants (Triton X-45, Triton X-100, polyethylene glycol-1000-monostearate, and Brij 35) and cyclodextrins is studied. It is shown that the addition of surfactant solutions to the aqueous solution of alpha, beta-, and gamma-cyclodextrins affords poorly soluble crystalline precipitates. Parameters of crystalline structure and the composition of complexes are analogues to those obtained on the basis of polyethylene oxide. Using a method of surface tension it is shown that cyclodextrins favor the increase of the value of critical micelle concentration (CMC) of surfactants. The dependence of CMC from the molar ratio cyclodextrin/surfactant permits us to determine the composition of inclusion complexes in solution. For Triton X-100 and polyethylene glycol-1000-monostearate values of stoichiometric composition of complexes in solution and in condensed phase agree well. It is shown that in the presence of beta-cyclodextrin the destruction of micelles based on Triton X-100 occurs. UV-spectroscopy is used for the investigation of the microenvironment of a phenyl group in inclusion complexes based on alpha- and beta-cyclodextrins. The interaction of gamma-cyclodextrin with PEO surfactants results in the formation of novel double-tailed surfactants. The values of CMC registered in solutions of these complexes is lower than the corresponding value of Triton X-100 and polyethylene glycol-1000-monostearate. The stoichiometric composition of complexes in solution is established from the dependence of CMC versus the gamma-cyclodextrin/surfactant ratio. The composition of the complexes in solution and condensed phase agree well. The interaction of alpha- and gamma-cyclodextrins with Brij 35 results in the formation of nonstoichiometric complexes. The investigation of the dependences of CMC of modified surfactants from temperature shows that these supramolecular structures exist at high temperatures. Copyright 1999 Academic Press.     

Electrokinetic characterization of polystyrene–non-ionic surfactant complexes

An experimental study on the electrophoretic mobility (μ_e) of polystyrene particles after the adsorption of non-ionic surfactants with different chain lengths is described. Two sulphate latexes with relatively low surface charge densities (3.2 and 4.8 μC cm⁻²) were used as solid substrate for the adsorption of four non-ionic surfactants, Triton X-100, Triton X-165, Triton X-305 and Triton X-405, each one with 9–10, 16, 30 and 40 molecules of ethylene oxide (EO), respectively. The electrophoretic mobility of the polystyrene–non-ionic surfactant complexes was studied versus the amount of adsorbed surfactant (Γ). The presence of non-ionic surfactant onto particles surface seems to produce a slight shifting of the slipping plane because the mobilities of the different complexes display a very small decreasing. The increase in the number of EO chains in the surfactant molecule seems to operate as a steric impediment which decreases the number of adsorbed large surfactant molecules. The electrophoretic mobilities of the latex–surfactant complexes with maximum adsorption were measured versus the pH and ionic strength of the dispersion. While the different complexes showed a similar qualitative behaviour compared with that of the bare latex against the pH, the adsorption of the surfactant reduces the typical maximum in the μ_e−log[electrolyte].     

Determination of Sn(II) and Sn(IV) after mixed micelle-mediated cloud point extraction using alpha-polyoxometalate as a complexing agent by flame atomic absorption spectrometry

The cloud point extraction behavior of Sn(II) and Sn(IV) using alpha-polyoxometalate and mixed surfactants solution was investigated. The mixture of a nonionic surfactant (Triton X-100) and a cationic surfactant (CTAB) was utilized as a suitable micellar medium for preconcentration and extraction of tin complexes. Sn(II) in the presence of Sn(IV) was extracted with alpha-polyoxometalate, 0.3% (w/v) Triton X-100 and 3.5x10(-5) mol L(-1) CTAB at pH 1.2. Whereas the pH value of 3.7 were used for the individual determination of Sn(II) and Sn(IV) and also for total tin determination at the same conditions. Enrichment factors of 100 were obtained for the preconcentration of both metal ions. Under the optimal conditions, linearity was obeyed in the ranges of 55-670 microg L(-1) of Sn(II) and 46-750 microg L(-1) of Sn(IV) ion concentration. The detection limit of the method was also found to be 12.6 microg L(-1) for Sn(IV) and 8.4 microg L(-1) for Sn(II). The relative standard deviation of seven replicate determination of 100 microg L(-1) both metal ions were obtained about 2.4%. The diverse ion effect of some anions and cations on the extraction efficiency of target ions were tested. Finally, the optimized conditions developed were successfully utilized for the determination of each metal ion in various alloy, juice fruit, tape and waste water samples with satisfactory results.     

Phase separation in non-ionic surfactant Triton X-100 solutions in the presence of phenol

The influence of concentration conditions and acidity on the phase separation in non-ionic surfactants Triton X-100 solutions in the presence of phenol was investigated. It was shown that the addition of small amounts of phenol results in the decrease of the cloud point temperature of Triton X-100 solutions. On the other hand, the addition of phenol into the investigated system resulted in the decrease of the hydration values of surfactant-rich phases and the increase of their hydrophobicity. The extraction degree and distribution coefficient of phenol between the water and the surfactant-rich phases were studied. On the basis of data obtained the molar parts of water, phenol and Triton X-100 in the non-ionic surfactant-rich phases formed at different concentration conditions were calculated. Possibilities of the application of phenol-induced micellar extraction for microcomponents preconcentration were estimated.