油资源二次运移大规模并行数值模拟及其在胜利油田应用

从生产实际出发,开展了多层问题的石油地质和渗流力学特征研究,提出了新的数学模型,构造了适合并行计算的耦合算子分裂隐式迭代格式,并成功地对胜利油田东营凹陷（四层）和滩海地区（三层）的实际问题进行了大规模并行计算的数值模拟,计算结果在油藏位置等方面和实际情况相吻合．成功地解决了这一计算渗流力学和石油地质的重要问题．     

三维油资源运移聚集的模拟和应用

盆地发育的运移聚集史数值模拟,其功能是重建油气盆地的运移聚集演化史,它对于油资源的勘探,确定油藏位置和计算油藏贮量,寻找新的油田,具有极其重要的价值.本文从地质科学实际出发,研究了三维问题的地质和渗流力学特征,提出二阶修正算子分裂隐式迭代格式,对着名油水运移聚集实验进行了数值模拟,结果基本吻合,并对胜利油田东营凹陷的实际问题进行数值模拟试验,结果和实际地质情况(油田位置等)基本吻合,成功解决了这一着名问题.     

碾压混凝土坝渗流场与应力场耦合模型研究

针对碾压混凝土坝存在众多施工层面问题,提出了确定影响层厚度以及相应物理力学参数的方法;在此基础上,探讨并建立了碾压混凝土坝渗流场与应力场两场耦合模型,研制了相应的三维有限元程序．研究表明,结合试验和理论分析确定的碾压混凝土坝层面影响层的厚度、弹性模量和泊松比等参数更切合实际;提出的碾压混凝土坝渗流场与应力场两场耦合模型,能较好地体现两场耦合作用,开发的三维有限元模型能较充分反映碾压混凝土坝施工层面的特性．通过研究,为分析施工层面对碾压混凝土坝变化性态影响,以及了解大坝的应力和渗流的相互作用提供了科学依据．     

李群方法在渗流力学的应用

试图用李群方法来分析流体及渗流的运动规律.对于流形上流体、渗流力学方程的研究,物理空间的流动中的拓扑结构只要具有李群的性质,便可以此来进行流动分析.这是将李群理论直接、直地应用于渗流力学的一种方法.李群方法将众多求解特定类型的渗流微分方程方法统一到共同的概念之下.李群无穷小变换方法为寻找微分方程的闭合形式的解提供的广泛的应用,补充了求解渗流力学方程的数学物理技巧.     

回归分析方法在大庆葡西地区地层压力预测上的应用

本根据数理统计分析,应用渗流力学理论,结合油田实际生产资料,得出大庆探区西部葡西地区各压力系统的地层压力预测公式,经实际资料验证,相对误差在0.27～4.89%之间,效果较好,有力地指导了油田钻井、固井、射孔和试油等项工作。     

油、水两相渗流驱动问题的离散算子法及其数值分析

本文应用离散算子法解决油、水两相渗流驱动问题的数值模拟并进行了理论分析.最后我们根据油田的实际地质参数进行了模型试算,并对结果进行分析.对于单相渗流数值模拟的理论分析我们已有工作.对于不考虑毛细管力的弹性驱动问题的有限元方法我们已有工作.     

非稳态渗流的自由边界问题

随着经济建设的高速发展,各种地下工程大量增加,如水坝和高层建筑的基础、地铁和隧道、水井和油井等。那里,介质中的渗流现象往往是工程单位需要考虑的重要问题。佘颖禾等在《应用数学和力学》第17卷6期中曾经给出了具有自由边界的稳态渗流的变分不等式模式及有限元解。本文中,以抽水井为例,进一步研究了非稳态渗流问题的变分不等式模式及其有限元解法。结果表明,对于非稳态的渗流问题,这种方法同样能避免传统的自由边界的迭代过程,为简单而快速地进行数值分析提供方便。     

多层合注封闭油藏注水井压降试井分析

对于复杂断块油气藏而言,砂体往往小、连片性差,但纵向上层数多,常规的单层注水模型已经不能准确的描述油藏的动态特征.为解决上述油藏的渗流问题,建立了多层合注外边界封闭油藏注水井不稳定渗流数学模型,模型中每一层的物性和边界大小各不相同.通过拉普拉斯变换,利用Stehfest数值反演对数学模型进行了求解,获得了多层合注条件下的井底压力响应特征曲线,并将曲线划分为六个阶段.研究表明主力层的砂体边界大小对井底压力动态影响较大;受多层干扰影响,用常规理论方法计算的边界大小有可能与实际地质情况不一致.     

相邻多个浅圆弧凹陷地形对平面SH波散射的级数解

本文采用解析法研究相邻多个线圆弧凹陷地形对平面SH波散射问题。文中由分离变量法把相邻多个圆弧凹陷对平面SH波的多重散射表示为各局部坐标中的级数之和,再利用Graf加法公式的内域和外域表达式进一步表示某个局部坐标中的双重无穷级数形式。问题最后可归结为求解一组无穷型的线性代数方程。文末给出了相邻两个等直径浅圆弧凹陷地形的多种深宽比对地面运动的影响的计算结果,并讨论了浅圆凹陷地形对波的屏蔽及它们之间的相互作用。     

关于非线性双曲型方程全离散有限元方法的稳定性和收敛性估计

本文研究非线性双曲型方程混合问题的有限元方法.这类问题的研究,对于非线性振动、渗流力学等实际问题,在理论和实用方面均有价值.关于线性、半线性双曲方程全离散有限元方法及非线性双曲方程半离散有限元方法的收敛性研究,已有[1]—[4].     

Antiplane Problem of Electroelasticity for a Hollow Piezoceramic Cylinder Excited by a System of Surface Electrodes

An antiplane mixed boundary-value problem of electroelasticity is considered for a hollow piezoceramic cylinder with an arbitrary system of active surface electrodes generating its harmonic vibrations. The problem is solved using a method elaborated earlier for investigating vibrations of a solid piezoceramic cylinder with a system of active surface electrodes. The scheme of numerical solution of the obtained singular integro-differential equations of the boundary-value problem is based on the quadrature method. Calculation results are presented that describe the amplitude-frequency characteristics of a hollow cylinder and the behavior of some mechanical and electric quantities both within the cylinder and on its boundary.     

Hollow glass microsphere production for laser direct-driven fusion targets on Shen Guang II

A liquid-droplet technique was investigated to fabricate thin wall hollow glass microspheres (HGM) used in laser fusion experiments on Shen Guang II. Glass-forming compositions, operating conditions of the droplet generator and the vertical multiple-zone furnace were optimized. Thin wall HGM with diameters of about 100, 200, and 520 μm were fabricated, whose failure pressures, gas retention properties for D2, and chemical durability were all characterized. The results of the fusion experiments show that the HGM targets are quite satisfactory and the highest neutron yields obtained are 4x 109.     

空心球复合材料热弹性性质的一些精确结果

本文基于所提出的基体均匀场方法研究了空心球增强复合材料的热弹性性质·导出了均匀边界条件激发的局部热场和力学场量的关系，并进而得到了复合材料等效热弹性性质之间的精确关系·对于具有某种特定内外径比的空心球所构成的宏观各向同性复合材料，如果基体和空心球的热膨胀系数相同，可以证明其等效体积模量和线膨胀系可以精确地确定·     

圆筒受余弦分布压力之解及其k→0的极限

本文得到一个新的应力函数。用此解答了圆筒受余弦分布压力的问题,并为解决圆筒在轴向受任意分布荷载作用的空间轴对称问题打下了基础。根据求出的解答,取压力沿轴向不变化时的极限,就导出了厚壁圆筒的Lamè公式。     

3D Analyses of the symmetric local stability loss of the circular hollow cylinder made from viscoelastic composite material

The 3D approach was employed for investigations of the symmetric local stability loss of the circular hollow cylinder made from the viscoelastic composite materials. This approach is based on investigations of the development of the initial rotationally symmetric infinitesimal local imperfections of the circular hollow cylinder within the scope of 3D geometrically nonlinear field equations of the theory of viscoelasticity for anisotropic bodies. The numerical results of the critical force and critical time are presented and discussed. For comparison and estimation of the accuracy of the results given by the 3D approach, the same problem is also solved by using various approximate shell theories. The viscoelasticity properties of the plate material are described by the fractional–exponential operator. The numerical results and their discussion are presented for the case where the cylinder is made of a uni-directional fibrous viscoelastic composite material. In particular, it is established that the difference between the critical times obtained by employing 3D and third order refined shell theories becomes more non-negligible if the values of the external compressive force are close to the critical compressive force which is obtained at t = ∞ (t denotes a time).     

Analytical solution of the quasi-static thermoelasticity problem in a pressurized thick-walled cylinder subjected to transient thermal loading

Thermoelasticity problem in a thick-walled cylinder is solved analytically using the finite Hankel transform. Time-dependent thermal boundary conditions are assumed to act on the inner surface of the cylinder. For the mechanical boundary conditions two different cases are assumed: Traction–displacement problem (traction is prescribed on the inner surface and the fixed displacement boundary condition on the outer one) and Traction–Traction problem (tractions are prescribed on both the inner and outer surfaces of the hollow cylinder). The quasi-static solution of the thermoelasticity problem is derived analytically, i.e., the transient thermal response of the cylinder is derived and then, quasi-static structural problem is solved and closed form relations are extracted for the thermal stresses in the two problems. The results show to be in accordance with that cited in the literature in the special cases.     

Propagation of unsteady waves in a hollow magnetoelastic cylinder in contact with liquid media

A numerical-analytic solution is constructed for the problem of magnetoelasticity for a hollow cylinder immersed in a liquid and loaded from inside by an impulse-type axisymmetric mechanical pressure. Nonconducting and compressible internal and external media have different densities and elastic moduli, with their motion described by wave equations. The hollow cylinder is assumed to be an ideal conductor, and its motion is described by a linearized system of equations of magnetoelasticity; on internal and external boundaries, the conditions of conjugation hold. The problem is solved by the method of integral Laplace transforms in the time domain, and the inverse transforms are found by numerical inversion. The solutions obtained for the bounded problem are compared with solutions for a simplified unbounded problem.Translated from Teoreticheskaya i Prikladnaya Mekhanika, No. 18, pp. 83–87, 1987.     

Solution of problems of free torsional vibrations of thick-walled orthotropic inhomogeneous cylinders

With the use of the 3D theory of elasticity, we investigate the problem of free torsional vibrations of an anisotropic hollow cylinder with different boundary conditions at its end faces. We have proposed a numerical-analytic approach for the solution of this problem. The original partial differential equations of the theory of elasticity with the use of spline approximation and collocation are reduced to an eigenvalue problem for a system of ordinary differential equations of high order in the radial coordinate. This system is solved by the stable numerical method of discrete orthogonalization together with the method of step-by-step search. We also present numerical results for the case of orthotropic and inhomogeneous material of the cylinder for some kinds of boundary conditions.