Optical biosensors based on Prussian Blue films

Optical biosensing schemes based on enzymatically modified inorganic/organic transparent films predominately composed of Prussian Blue are demonstrated. The composite film, which is non-electrochemically deposited on a non-conducting support. is used as an optical transducer for flow-through biosensors based on hydrolases and oxidases. Urease and glucose oxidase are utilized as model enzymes. Action of the urea biosensor is based on optical pH sensitivity of Prussian Blue indicator. The glucose biosensor is acting as first-generation optical biosensor based on in situ generated Prussian White transducer for hydrogen peroxide. These simple, single-pass transmission optical biosensors exhibit sensitivity in the millimolar range of concentration. The biosensors are very stable owing to presence of a poly(pyrrolylbenzoic acid) network in the composite material. This organic polymer plays a dual role as a binding agent for inorganic material and as a functionalized support for strong covalent immobilization of enzyme molecules.     

Polarized vibrational spectra of Prussian Blue films: Spectroscopic evidence of columnar growth

We describe the preparation of Prussian Blue films with several thicknesses, and their characterization by means of cyclic voltammetry and polarized reflection FTIR spectroscopy. The electrochemical experiments demonstrated a direct relationship between the film thickness and its intrinsic conductivity. The vibrational spectra showed asymmetrical bands in the vicinity of the cyanide stretching band. The s-polarization bands showed a shift to higher frequencies, while the p-polarization bands showed a downshift with increasing film thickness. The presence of shifted cyanide stretching bands in the s- and p-polarizations is attributed to the columnar shape of Prussian Blue grains formed in the growth process.     

Prussian blue solid-state films and membranes as potassium ion-selective electrodes

The use of thin films of Prussian blue and heterogeneous Prussian blue membranes as potassium ion-selective electrodes was investigated. All of the heavier group I cations and NH⁺₄ interfere strongly but there is relatively good selectivity towards Na⁺ with a selectivity coefficient of ca. 5 × 10^?3. The thin-film measurements, based on Prussian blue deposited on platinum, involve conditioning the electrode to a fixed potential according to the method used by Engel and Grabner for copper hexacyanoferrate(III) films. The membrane electrodes were based on mixing Prussian blue with polymeric supporting films such as polystyrene and epoxy. A particularly simple practical configuration involves Prussian blue membranes deposited directly on copper conductors where one membrane serves as a reference electrode. A reversible cell, without liquid junction, is formed with Prussian blue and Ag/AgCl electrodes and this serves as a means for determining an accurate value for the standard reduction potential of Prussian blue, which is found to be 0.238 V vs. Ag/AgCl at 25 °C.     

Role of acidity on the electrochemistry of Prussian Blue at plain and Nation filmcoated electrodes

Prussian Blue (PB) coated on plain platinum (Pt) shows a redox wave at 0.44V vs SCE in addition to the two usual redox waves at 0.82 and 0.12 V vs SCE when the electrodes were dipped in acidic KC1 solution. PB incorporated into Nation film-coated on Pt electrode exhibited the same behaviour even in the presence of neutral KG solution. In acidic KC1, the additional redox wave observed for PB incorporated into Nation film shifted positively to 0.39V vs SCE and the peak separation was reduced to 30mV. The observed additional redox wave for PB coated on plain Pt electrode and incorporated into Nafion film-coated Pt electrodes was assigned to the partial reduction of PB occurring due to the insertion of protons into the film. The effect of various cations on the electrochemistry of PB incorporated into Nafion film-coated electrode was also studied.     

On the mechanism of H2O2 reduction at Prussian Blue modified electrodes

Prussian Blue deposited on the electrode surface under certain conditions is known to be a selective electrocatalyst of hydrogen peroxide (H₂O₂) reduction in the presence of O₂. The electrocatalyst was stabilized at cathodic potentials preventing its loss from the electrode surface. Hydrodynamic voltammograms of H₂O₂ reduction indicated the transfer of two electrons per catalytic cycle. The operational stability of Prussian Blue in H₂O₂ reduction was highly dependent on the buffer capacity of the supporting electrolyte. Since Prussian Blue is known to be dissolved in alkaline solution, it was confirmed that in neutral aqueous solutions the product of H₂O₂ electrocatalytic reduction is OH⁻.     

Electrochemically deposited thiophene-based polymers as protective agents for Prussian Blue thin films

A composite material based on overlapped layers of electrochemically synthesized Prussian Blue (PB) and terthiophene-derived polymer is described, aiming at enhancing the stability of the hexacyanoferrate thanks to the protective action of the polymer. Two bilayer configurations and deposition methods (for the polymer component) were tested. The morphology and electrochemical behavior in organic solvent and in aqueous solutions containing different supporting electrolytes were carried out. The best performances of electrodes modified with films of the composite material as to increased stability of PB were achieved with the potentiostatically deposited polymer covering the PB layer, in acetate buffer at pH 5.5. As for potential cycling stress, the anodic and cathodic peak currents due to PB were not decreased after 20 cycles. Conversely, PB alone displayed the anodic peak currents relevant to PB/Prussian White (PW) and PB/Berlin Green (BG) systems decreased by about 30 %. The stability to local pH increase was assessed by cyclic voltammetry after electrochemical reduction of H₂O₂. For example, the anodic peak currents were decreasing by 15 % and 5 % for the two PB redox systems, while for PB alone the same currents decreased by 35 % and 10 %. The response sensitivity to hydrogen peroxide was improved by 54 %, with respect to PB alone, as evaluated by chronoamperometry.     

Electrosynthesis of poly-o-diaminobenzene on the Prussian Blue modified electrodes for improvement of hydrogen peroxide transducer characteristics.

Electropolymerisation of nonconducting polymer, poly-(1,2-diaminobenzene) on the top of Prussian Blue (PB) modified electrode led to significant improvement of resulting hydrogen peroxide transducer selectivity and operational stability. The reported transducer retained 100% of response during 20 h under the continuous flow of 0.1 mM H(2)O(2), and thus improves the stability level in selective peroxide detection by one order of magnitude. The selectivity value of the PB-poly(1,2-DAB) based H(2)O(2) sensor in relation to ascorbate is approximately 600. No signals to acetaminophen and urate were investigated. PB-poly(1,2-diaminobenzene) modified electrode allows the detection of H(2)O(2) in the flow-injection mode down to 10(-7) M with the sensitivity 0.3 A M(-1) cm(-2), which is only two times lower compared to the uncovered PB based transducer.     

Electrochemical preparation and characterisation of bilayer films composed by Prussian Blue and conducting polymer

Preparation and electrochemical behaviour of bilayer films consisting of iron(III) hexacyanoferrate, well known as Prussian Blue, and of poly[4,4^′-bis(butylsulphanyl)-2,2^′-bithiophene], on a platinum electrode, are reported. The electrochemical features of the Prussian Blue/conducting polymer bilayer system are examined in aqueous and acetonitrile solutions. Cyclic voltammetric studies show that, in acetonitrile solvent, the inner layer Prussian Blue is electroactive to some extent, though the electrochemical response of the system is mainly accounted for by poly[4,4^′-bis(butylsulphanyl)-2,2^′-bithiophene] outer layer. On the other hand, in aqueous solution Prussian Blue exhibits good electroactivity. Under specific experimental conditions, the individual redox behaviour of each constituent of the bilayer is evidenced in the two solvents separately, i.e., that of PB and that of poly[4,4^′-bis(butylsulphanyl)-2,2^′-bithiophene] in aqueous and in organic solvent, respectively. However, interesting reciprocal influences are evident in the current/potential curves recorded under conditions which are discussed.     

Electrochemical characterization of Prussian Blue nanoparticles

Mixing of FeCl₃ solution with the excess of K₄Fe(CN)₆ solution results in well-dispersed Prussian Blue (PB) nanoparticles that are stable over at least one month. Polyaniline was deposited onto the PB-nanoparticle-modified electrode to provide its stability. Promising results of the enhanced detection of H₂O₂ with these PB nanoparticles are described. The text was submitted by the authors in English.     

Electrochemical synthesis and nucleation and growth mechanism of Prussian blue films on p-Si(100) electrodes

In this study, we examined the synthesis of Prussian blue onto p-Si(100). The Prussian blue formation was carried out by means of the deposition of a Fe film and then its dissolution in presence of potassium hexacyanoferrate(II). In the first stage, a study by cyclic voltammetry was carried out, and then, using the potential step method, the corresponding nucleation and growth mechanism were determined. Likewise, a morphologic analysis of the deposits obtained at different potential values by means of atomic force microscopy was carried out. The results are consistent with a 3D progressive nucleation with diffusion-controlled growth. Finally, this research is oriented to construct electrochemical storage devices which can be in situ loaded by the photovoltaic action of the semiconductor base material doped silicon.     

Urea Biosensor Based on Electrochromic Properties of Prussian Blue

Prussian blue (PB) is an electrochromic material, which can be used as a signal transducer in the formation of optical urea biosensors. The previous researches in electrochromic properties of PB demonstrated the optical PB response to ammonium ions, which occurs when ammonium ions are interacting with PB layer at a constant 0.2 V vs Ag|AgCl|KCl_sat potential. In this work PB optical dependence on ammonium ions concentration was applied in the formation of electrochromic urea biosensor. Biosensor was formed by modifying the optically transparent indium tin oxide (ITO) coated glass electrode (glass/ITO) with Prussian blue layer and immobilizing urease (glass/ITO/PB‐urease). Calibration curve showed the linear dependency (R²=0.995) between the change of maximal absorbance (ΔA) and urea concentration in concentration range varying from 3 mM to 30 mM. The highest sensitivity (4 ΔA M^?1) of glass/ITO/PB‐urease biosensor is in the concentration range from 7 mM to 30 mM. It was determined that working principle of the glass/ITO/PB‐urease biosensor is not related to pH changes occurring during enzymatic hydrolysis of urea.     

普鲁士蓝修饰生物传感器的研究进展

文中叙述了普鲁士蓝(PB)结构特征和电化学特性,PB在过氧化氢传感器中的应用。综述了PB葡萄糖传感器及其他基于PB的生物氧化酶传感器的研究进展。引用文献52篇。     

普鲁士蓝膜的电沉积及其电化学阻抗谱

利用循环伏安法在两种不同组成的电解液中进行铂电极上普鲁士蓝膜的电化学沉积，在氯化钾溶液中测量了修饰膜的循环伏安行为，比较了两种膜的电化学阻抗谱。修饰普鲁士蓝膜铂电极的电化学阻抗谱测量结果表明，沉积条件及其沉积膜厚度均对电子传递过程产生影响。     

Preparation, characterization, and electrocatalytic activity of surface anchored, Prussian Blue containing starburst PAMAM dendrimers on gold electrodes

Gold bead electrodes were modified with submonolayers of 3-mercaptopropionic acid or 2-aminoethanethiol and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0 and 3.5, respectively) to obtain films on which Prussian Blue (PB) was later absorbed to afford mixed and stable electrocatalytic layers. Experiments carried out with these novel materials not only showed an improved surface coverage of PB on the dendrimer modified electrodes as compared to PB modified gold electrodes prepared under acidic conditions, but also showed an increased stability at neutral pH values for one of the dendrimer containing substrates where the PB film on a bare gold electrode is simply not formed. The dendrimer modified electrodes were also tested as electrocatalytic substrates for the electroxidation of L(+)-ascorbic acid (AA), and it was found that their sensitivity as well as the corresponding detection limits were improved as compared to the voltammetric response of a Au-PB modified electrode. On the basis of UV-visible (UV-vis) spectroscopy and electrochemical experiments, it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers.     

Electroanalytical applications of Prussian Blue and its analogs

The applications of transition metal hexacyanoferrates in electroanalysis are surveyed. Prussian Blue (ferric hexacyanoferrate) is recognized as the most promising low-potential transducer for hydrogen peroxide reduction among all known systems. The advantages of Prussian Blue over platinum or peroxidase electrodes for hydrogen peroxide detection are discussed. Various types of biosensors based on transition metal hexacyanoferrates and oxidase enzymes are considered. Amperometric biosensors based on Prussian Blue-modified electrodes allow the detection of glucose and glutamate down to 10^–7 mol L^–1 in the flow-injection mode. The future prospects of Prussian Blue-modified electrodes in analytical chemistry for the monitoring of chemical toxic agents, in clinical diagnostics, and in food control are outlined.     

NaKCoFe普鲁士蓝类配合物纳米颗粒的磁性研究

在2-乙基己基琥珀酸酯磺酸钠(AOT)/异辛烷/水微乳液体系内,通过改变w值(水与AOT的物质的量之比)和反应物浓度比例得到了5nm球形至80nm立方状的NaKCoFe普鲁士蓝类配合物。发现w值和反应物浓度比不仅影响产物的形貌,而且影响配合物的结构。用UV、XRD、EDS、ICP、IR和超导量子干涉仪(SQUID)等对产品进行了结构和磁学性能的表征,发现影响产物磁性的主要因素是碱金属的含量。     

Heavy phosphate adsorption on amorphous ITO film electrodes: nano-barrier effect for highly selective exclusion of anionic species

We prepared an amorphous indium tin oxide (ITO) film and studied it with respect to its surface characterization and the effect of phosphate adsorption on its electrochemical properties. The film was deposited using RF sputtering under ambient low-oxygen conditions at room temperature. The XPS results revealed that the amount of phosphate adsorbed on the amorphous ITO film was more than 4.6 times greater than that adsorbed on commercially available polycrystalline ITO film in spite of the smaller microscopic surface area of the former. Electrochemical responses for anionic species such as L-ascorbic acid (AA) and 3,4-dihydroxyphenylacetic acid (DOPAC) on the phosphate-adsorbed ITO film electrodes were more effectively suppressed at the amorphous ITO film electrode than at the polycrystalline ITO film electrode when a phosphate-containing electrolyte was used. Such suppression could be attributed to the electrostatic repulsion between the anionic species and more heavily adsorbed phosphate on our amorphous ITO film electrode surface. This effect is made more pronounced by increasing the phosphate concentration to 1 mM. With 1 mM phosphate, the amorphous ITO film electrode showed the highest selectivity for dopamine (DA) against the anionic species, namely, 880 for DA/AA and 330 for DA/DOPAC, respectively. In contrast, the selectivity was 120 for DA/AA and 20 for DA/DOPAC with the polycrystalline ITO film electrode.     

普鲁士蓝纳米修饰电极的制备及表征

采用激光加热拉伸的方法制备铂纳米电极,并通过交流电刻蚀的方法制备纳米孔电极,在这两种电极上可通过电化学方法原位合成单颗普鲁士蓝微晶. 结果表明,普鲁士蓝微晶在纳米微孔电极上的机械附着强度增强. 这种方法可用于制备纳米修饰电极或研究功能微晶体材料的电化学性质.     

Electroanalytical Properties of ITO Electrodes Modified with Environment‐Sensitive Poly(N‐isopropylacrylamide) Gel and Prussian Blue

It has been shown that ITO electrodes could be modified with a volume‐phase‐transition gel based on poly(N‐isopropylacrylamide) cross‐linked with N,N′‐methylenebisacrylamide. Prussian blue (PB) was deposited electrochemically inside the gel while glucose oxidase was added at the time of electropolymerization. The electrocatalytic activity of glucose oxidase towards the oxidation of glucose (measured as the reduction current of hydrogen peroxide) was strongly depressed by the shrinking process. Since the volume phase transition triggered by the temperature change is reversible the obtained change in the enzyme activity may be useful for getting a switchable system.     

电化学石英晶体微天平研究普鲁士蓝修饰电极

石英晶体徽天平(Quartz Crystal Microbalance,简称QCM)是一种非常灵敏的质量传感器,其检测能力可达ng级。QCM在化学中的早期应用是检测大气中的徽量成分,目前仍较活跃。由于石英压电晶体浸入溶液后在晶体/溶液界面存在较大的能量损失而不能够稳定振荡,致使QCM的应用较长时间局限于气相。八十年代初石英压电晶体在液相中的振荡终获成功,开辟了QCM应用的一个全新领域。液相中振荡成功后,QCM很快应用于电化学研究。目前已发展成为一种全新的电化学传感器——电化学石英晶体微天平(EQCM),并已用于金属电沉积、电化学腐蚀、电分析等方面的研究。