Electrochemically controlled growth and positioning of suspended collagen membranes

Two independently recognized in vitro polymer aggregation variables, electric field and pH, can be used in concert to produce suspended membranes from solutions of type I collagen monomers, without need of a supporting substrate. A collagen network film can form at the alkaline-acidic pH interface created during the normal course of water electrolysis with parallel plate electrodes, and the anchoring location can be controlled by adjusting the bulk electrolyte pH. Electrosynthesized films remain intact upon drying and rehydration and function as ion-separation membranes even in submillimeter channels. This approach could benefit lab-on-a-chip technologies for the rational placement of membranes in microfluidic devices.     

Electrochemically controlled hydrogen bonding. Redox-dependent formation of a 2:1 diarylurea/dinitrobenzene2- complex

[reaction: see text] The electrochemistry of 1,2-dinitrobenzene (1,2-DNB), 1,3-dinitrobenzene (1,3-DNB), and 1,4-dinitrobenzene (1,4-DNB) is strongly affected by the presence of 1,3-diphenylurea. In DMF, the second reduction potential of all three DNBs shifts substantially positive in the presence of the urea, indicating very strong hydrogen bonding to the dianions. With 1,2- and 1,3-DNB, the hydrogen bonding leads to irreversible chemistry, likely due to proton transfer from the urea to the dianions. No such irreversible behavior is observed with 1,4-DNB. Instead, the second reduction shifts into the first reduction, producing a single, reversible, two-electron cyclic voltammetric wave at high urea concentrations. Computer simulations show that the changes in wave shape accompanying this process are well accounted for by the stepwise formation of a 1:1 and 2:1 1,3-diphenylurea/DNB2- complex, with sequential binding constants of approximately 5.5 x 10(4) M(-1) and approximately 4.0 x 10(3) M(-1) in DMF.     

Electrochemically controlled formation/dissociation of phosphonate-cavitand/methylpyridinium complexes

The phosphorus-bridged cavitand 1 self-assembles very efficiently in CH2Cl2 with either the monopyridinium guest 2+ or the bispyridinium guest 3(2+). In the first case a 1:1 complex is obtained, whereas in the second case both 1:1 and 2:1 host-guest complexes are observed. The association between 1 and either one of the guests causes the quenching of the cavitand fluorescence; in the case of the adduct between 1 and 3(2+), the fluorescence of the latter is also quenched. Cavitand complexation is found to affect the reduction potential values of the electroactive guests. Voltammetric and spectroelectrochemical measurements show that upon one-electron reduction both guests are released from the cavity of 1. Owing to the chemical reversibility of such redox processes, the supramolecular complexes can be re-assembled upon removal of the extra electron from the guest. Systems of this kind are promising for the construction of switchable nanoscale devices and self-assembling supramolecular materials, the structure and properties of which can be reversibly controlled by electrochemical stimuli.     

Electrochemically controlled hydrogen bonding. Nitrobenzenes as simple redox-dependent receptors for arylureas

Reduction of nitrobenzene derivatives in the presence of arylureas in aprotic solvents results in large positive shifts in potential of the nitrobenzene(0/)(-) cyclic voltammetry wave with little change in wave shape. This behavior is indicative of reversible hydrogen bonding between nitrobenzene radical anions and arylureas. Computer fitting of the cyclic voltammetry of 4-nitroaniline, NA, plus 1,3-diphenylurea in DMF shows essentially no binding between urea and NA in the oxidized state (K(ox) < 1 M(-)(1)), but very strong binding in the reduced state (K(red) = 8 x 10(4) M(-)(1)), along with very rapid rates of hydrogen bond formation (k(f)'s approximately 10(8)-10(10) M(-)(1) s(-)(1)), making this system a fast on/off redox switch.     

Electrochemically controlled hydrogen bonding. Electrolyte effects in an oxidation-based arylurea-amide system

Oxidation of a dimethylaminophenyl-substituted urea leads to a > 2000-fold increase in binding strength between the urea and a diamide guest in 0.1 M NBu4B(C6F5)4/CH2Cl2. The strength of this interaction is obscured when NBu4ClO4 or NBu4PF6 is used as the electrolyte due to competition between the neutral guest and the electrolyte anion for H-bonding to the urea cation.     

Electrochemically controlled hydrogen bonding. o-Quinones as simple redox-dependent receptors for arylureas

9,10-Phenanthrenequinone and acenaphthenequinone are shown to act as simple redox-dependent receptors toward aromatic ureas in CH(2)Cl(2) and DMF. Reduction of the o-quinones to their radical anions greatly increases the strength of hydrogen bonding between the quinone carbonyl oxygens and the urea N-hydrogens. This is detected by large positive shifts in the redox potential of the quinones with no change in electrochemical reversibility upon addition of urea guests. Cyclic voltammetric studies with a variety of possible guests show that the effect is quite selective. Only guests with two strong hydrogen donors, such as O-H bonds or amide N-H bonds, that are capable of simultaneously interacting with both carbonyl oxygens give large shifts in the redox potential of the quinones. The electronic character and conformational preference of the guest are also shown to significantly affect the magnitude of the observed potential shift. In the presence of strong proton donors the electrochemistry of the quinone becomes irreversible indicating that proton transfer has taken place. Experiments with compounds of different acidity show that the pK(a) of the protonated quinone radical is about 15 on the DMSO scale, >4 pK(a) units smaller than that of 1,3-diphenylurea. This is further proof that hydrogen bonding and not proton transfer is responsible for the large potential shifts observed with this and similar guests.     

Concentration of hydrogen nanobubbles in electrolyzed water

The hydrogen concentration of solutions supersaturated with hydrogen comprising dissolved hydrogen and hydrogen bubbles obtained through water electrolysis was studied. The rate of decrease in concentration of hydrogen nanobubble diameter below 600 nm and dissolved hydrogen with elapsed time after electrolysis was seemed to be independent of ionic strength and ion type and storage temperature. The concentration of hydrogen nanobubbles (mol dm(-3)) in electrolyzed water decreases with ionic strength, while the total hydrogen concentration remains roughly constant. The hydrogen nanobubble concentration increases in accordance with the nature of ions existing in solution in the following order I- < Br- < Cl- and K+ < Li+ < Na+. It is shown that the ratio of hydrogen nanobubble concentration to total hydrogen concentration of hydrogen in a catholyte strongly depends on the ratio in the supersaturated hydrogen solution near the electrode surface.     

Spontaneous chemical reactions between hydrogen and oxygen in nanobubbles

Bulk nanobubbles (NBs) generated electrochemically by short voltage pulses of alternating polarity behave differently from those produced by regular methods. Only bubbles smaller than 200 nm are formed in the process, and their concentration is very high. Moreover, the bubbles containing both H₂ and O₂ gases disappear fast via the combustion reaction, although the reaction in such a small volume cannot happen according to the classical combustion theory. Experimental facts about these unusual NBs are reviewed, and current understanding of the observed phenomena is provided. Visualization methods of a cloud of NBs above the electrodes are briefly discussed. Experimental signatures demonstrating the reaction between the gases in NBs are considered. A surface-assisted mechanism proposed for the combustion reactions in restricted volumes with a high surface-to-volume ratio is discussed. It is explained how the same mechanism is able to describe the explosion of microbubbles that is observed at special conditions.     

Electrochemically controlled in-tube solid phase microextraction

We report a new in-tube solid phase microextraction approach named electrochemically controlled in-tube solid phase microextraction (EC in-tube SPME). This approach, which combined electrochemistry and in-tube SPME, led to decrease in total analysis time and increase in sensitivity. At first, pyrrole was elctropolymerized on the inner surface of a stainless steel tube. Then, the polypyrrole (PPy)-coated in-tube SPME was coupled on-line to liquid chromatography (HPLC) to achieve automated in-tube SPME–HPLC analysis. After the completion of EC-in-tube SPME–HPLC setup, the PPy-coated tube was used as working electrode for uptake of diclofenac as target analyte. Extraction ability of the tube in presence and in absence of applied electrical field was investigated. It was found that, under the same extraction conditions, the extraction efficiency could be greatly enhanced by using the constant potential. Important factors are also optimized. The detection limit (S/N = 3) and precision were 0.1 μg L⁻¹ and 4.4%, respectively.     

Electrochemically induced formation of organomercury compounds

A procedure for the alkylation of metallic mercury by (dimethylglyoximato)butylcobalt(III) electrochemically generated in the presence of butyl bromide is proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 309–312, February, 1994.     

Characteristics of hydrogen nanobubbles in solutions obtained with water electrolysis

A solution supersaturated with hydrogen obtained by water electrolysis was studied using cyclic voltammetry. The cyclic voltammogram of the solution supersaturated with hydrogen gave a peak current at −0.1 V vs. AgAgCl. No peak current in a solution saturated with hydrogen was observed by bubbling hydrogen gas through the solution. The peak current was influenced by the temperature and ion type of the electrolyte. The peak current was found to be due to the presence of hydrogen nanobubbles. The peak current increased with increasing hydrogen nanobubble concentration and decreased to zero within 3 h after electrolysis.     

Electrochemically controlled self-assembly of an organometallic block copolymer

A new means of controlling the order-disorder transition of block copolymers is presented. By applying small electrical potentials (2 V/cm) to disordered solutions of an organometallic block copolymer, oriented ordered grains were obtained near the positive electrode. After reversing the electrical bias on the system, the ordered grains disappeared, and new, oriented, ordered regions were formed at the opposite electrode. Our work establishes the concept of electrochemical self-assembly for controlling order formation in block copolymers.     

Electrochemically controlled release based on nanoporous conducting polymers

An electrochemically controlled drug release system based on nanoporous polypyrrole (PPy) films was developed. Pyrrole and a model drug, fluorescein, were electrochemically copolymerized on glassy carbon (GC) electrodes modified with self-assembled multilayer polystyrene (PS) nanobeads, and PPy films incorporated with fluorescein as dopants were formed among the interstitial spaces of the tightly packed PS nanobead template. After the removal of the PS hard template, nanoporous PPy films incorporated with the drug fluorescein were obtained. Due to the porous morphology and huge surface area, the efficiency of the prepared PPy films in electrochemically releasing incorporated fluorescein was about nine times higher than that of conventional PPy films.     

Effects of surfactants on the formation and the stability of interfacial nanobubbles

Contamination has previously been invoked to explain the flat shape and the long lifetimes of interfacial nanobubbles (INBs). In this study, the effects of surfactants on the formation and the stability of INBs were investigated when surfactants were added to the system before, during, and after the standard solvent exchange procedure (SSEP) for the formation of INBs. The solutions of sodium dodecyl sulfate (SDS) above critical micelle concentration were found to have little effect on the bubble stability. Likewise, cleaning of the substrate with a surfactant solution had little effect. In contrast, addition of a water-insoluble surfactant during the formation dramatically reduced the INBs. Finally, repeated application of SSEP to surfactant-coated substrates progressively rinsed the surfactant off the system. Thus, we found no evidence to support the hypothesis that (1) INBs are stabilized by a layer of insoluble organic contaminant or that (2) SSEP introduces surface-active materials to the system that could stabilize INBs.     

Electrochemically controlled interactions between TTF-based dendrimers and an electron-rich oligomer

Electrochemically controlled interactions have been shown to occur between TTF containing dendrimers 1 and 2 and the electron-rich oligomer 3.     

Electrochemically controlled self-assembled monolayers characterized with molecular and sub-molecular resolution

Self-assembled organization of functional molecules on solid surfaces has developed into a powerful and sophisticated tool for surface chemistry and nanotechnology. A number of reviews on the topic have been available since the mid 1990s. This perspective article aims to focus on recent development in the investigations of electronic structures and assembling dynamics of electrochemically controlled self-assembled monolayers (SAMs) of thiol containing molecules on gold surfaces. A brief introduction is first given and particularly illustrated by a Table summarizing the molecules studied, the surface lattice structures and the experimental operating conditions. This is followed by discussion of two major high-resolution experimental methods, scanning tunnelling microscopy (STM) and single-crystal electrochemistry. In Section 3, we briefly address choice of supporting electrolytes and substrate surfaces, and their effects on the SAM structures. Section 4 constitutes the major body of the article by offering some details of recent studies for the selected cases, including in situ monitoring of assembling dynamics, molecular electronic structures, and the key external factors determining the SAM packing. In Section 5, we give examples of what can be offered by theoretical computations for the detailed understanding of the SAM electronic structures revealed by STM images. A brief summary of the current applications of SAMs in wiring metalloproteins, design and fabrication of sensors, and single-molecule electronics is described in Section 6. In the final two sections (7 and 8), we discuss the current status in understanding of electronic structures and properties of SAMs in electrochemical environments and what could be expected for future perspectives.     

Electrochemically induced growth of zinc oxide.

The electrolytically induced precipitation of zinc oxide from zinc nitrate solution on gold surfaces in the presence of water-soluble polymers was examined for reaction times between 0.5 and 600 seconds. Regardless of the additive, polycrystalline films of zinc oxide have formed after 30 seconds, but polymeric additives dramatically change the morphology of the ZnO films. Amperometric analysis and fitting the diffusion reduced the current density-time curve according to Avrami kinetics and it reveals that polymers bearing methacrylic acid groups result in spherical growth whereas such with sulfonic acid groups lead to a platelike growth of crystallites. Without additive prisms grow predominantly in one dimension. These findings are confirmed also by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis.     

Electrochemically controlled assembly and logic gates operations of gold nanoparticle arrays

The reversible assembly of β-cyclodextrin-functionalized gold NPs (β-CD Au NPs) is studied on mixed self-assembled monolayer (SAM), formed by coadsorption of redox-active ferrocenylalkylthiols and n-alkanethiols on gold surfaces. The surface coverage and spatial distribution of the β-CD Au NPs monolayer on the gold substrate are tuned by the self-assembled monolayer composition. The binding and release of β-CD Au NPs to and from the SAMs modified surface are followed by surface plasmon resonance (SPR) spectroscopy. The redox state of the tethered ferrocene in binary SAMs controls the formation of the supramolecular interaction between ferrocene moieties and β-CD-capped Au NPs. As a result, the potential-induced uptake and release of β-CD Au NPs to and from the surface is accomplished. The competitive binding of β-CD Au NPs with guest molecules in solution shifted the equilibrium of the complexation-decomplexation process involving the supramolecular interaction with the Fc-functionalized surface. The dual controlled assembly of β-CD Au NPs on the surface enabled to use two stimuli as inputs for logic gate activation; the coupling between the localized surface plasmon, associated with the Au NP, and the surface plasmon wave, associated with the thin metal surface, is implemented as readout signal for "AND" logic gate operations.     

Electrochemistry of nanobubbles

Gas bubble formation is a common phenomenon in numerous electrochemical processes, such as water splitting, chloralkaline process, and fuel cells. Many efforts have been made to understand the behaviors of microsized or larger gas bubbles in electrochemical systems in the past few decades. It was not until recent years that the electrochemistry of nanosized gas bubbles (nanobubbles) has begun receiving attention. In this short review, we summarize recent advances in the field of electrochemistry of nanobubbles, ranging from new fundamental understandings of nanobubble behaviors to the development of novel bubble-based applications inspired by the basic research of nanobubble electrochemistry.