Reversible Interconversion between Luminescent Isomeric Metal–Organic Frameworks of [Cu4I4(DABCO)2] (DABCO=1,4‐Diazabicyclo[2.2.2]octane)

The metal–organic frameworks (MOF) of cluster [Cu₄I₄(DABCO)₂] (DABCO=1,4‐diazabicyclo[2.2.2]octane) have been prepared and characterized as two different crystalline forms, I and II . Form I is obtained by reaction of DABCO and CuI in aqueous solution or by solvothermal reaction, while form II is obtained by reacting DABCO and CuI in acetonitrile. Their luminescence properties in the solid state have been analyzed at room temperature and at 77 K. MOF II has bright emission with a maximum at 556 nm that shifts bathochromically at low temperature in conjunction with a marked change in the colour of the emission. The emission of MOF I has a maximum at 580 nm and a less pronounced temperature dependence. The peculiar luminescence properties of the two isomers have been interpreted by utilising current knowledge on the excited states properties of Cu^I cubane clusters. The two isomers exhibit a high degree of porosity and can release the disordered solvent molecules trapped in the channels, whilst preserving the crystal structure. Isomer I can be converted into II on exposure to acetonitrile or methanol vapour, whereas II reverts to I when heated in a closed pan at 250 °C.     

Multiphoton ionization spectra of two caged amines

The multiphoton ionization spectra of quinuclidine (ABCO) and triethylenediamine (DABCO) have been measured. All of the observed resonances are two-proton transitions to low-lying localized Rydberg states. For ABCO the lowest energy transitions are assigned as ¹A₁ (3s) ← ¹A₁ (n) 4.84 eV, and ¹E (3p_xy) ← ¹A₁ (n), 5.42 eV. In the case of DABCO, orbitals localized on the nitrogens interact and are split into two new orbitals. In terms of the split orbitals the low energy resonances in DABCO are assigned as ¹E′[3p_xy(?)] ← ¹A₁ (n+_, 4.44 eV, and ¹E″ [3p_xy(+)] ← ¹A₁ (n+), 4.94 eV.     

Aminoazanium of DABCO: An Amination Reagent for Alkyl and Aryl Pinacol Boronates

The aminoazanium of DABCO (H₂N‐DABCO) has been developed as a general and practical amination reagent for the direct amination of alkyl and aryl pinacol boronates. This compound is stable and practical for use as a reagent. Various primary, secondary. and tertiary alkyl?Bpin and aryl?Bpin substrates were aminated to give the corresponding amine derivatives. The amination is stereospecific. The anti‐Markovnikov hydroamination of olefins was easily achieved by catalytic hydroboration with HBpin and in subsequent situ amination using H₂N‐DABCO. Moreover, the combination of 1,2‐diboration of olefins, using B₂pin₂, with this amination process achieved the unprecedented 1,2‐diamination of olefins. The amination protocol was also successfully extended to aryl pinacol boronates.     

Strychnine : A fast physical quencher of singlet oxygen (1Δg)

Pulsed laser excitation of 2-acetonaphthone in aerated benzene, toluene, acetone, acetonitrile or ethanol results in formation of O₂(¹Δ_g), the infrared luminescence of which has been monitored by time-resolved emission spectroscopy. The rate constants for the quenching of this emission by the indole alkaloid strychnine in all five solvents have been determined and compared with the corresponding values for the well-known O₂ (¹Δ_g) quencher DABCO. Strychnine (1) is the fastest known tertiary amine quencher of this species via a process which is at least 99% physical in character.     

Computational assisted electrochemical studies for 1,4-diazabicyclo[2,2,2]octane determination at multiwalled carbon nanotube paste electrode

A multiwalled carbon nanotube-modified carbon paste electrode (MWCNT-PE) was used for determination of 1,4-diazabicyclo[2,2,2]octane (DABCO or TEDA) in 0.1 M phosphate buffer solutions (pH 10.25). Cyclic voltammetry(CV) and differential pulse voltammetry (DPV) techniques were used to investigate the electrocatalytic oxidation of DABCO at the surface of modified electrode. The results shown that the oxidation peak current of DABCO at the surface of MWCNT-PE was 2.40 times larger than that at the bare electrode. The experimental formal redox potential (E°') of DABCO was obtained 986 mV versus SHE (Standard Hydrogen Electrode). Density functional theory (DFT) method at B3LYP/6-311++G** level of theory and a conductor-like Polarizable Continuum Model (CPCM) was used to calculate the E°' values. The highest occupied molecular orbital (E _HOMO), lowest unoccupied molecular orbital (E _LUMO) and some thermodynamic parameters such as Gibbs free energy of DABCO and its oxidation forms were calculated. Both direct and indirect methods were used to calculate the theoretical standard electrode potential for DABCO and the results were found to be in good agreement with the experimental values.     

Amide bond formation using an air-stable source of AlMe3

Synthesis of amides from coupling esters with a range of primary amines can be conveniently achieved in moderate to excellent yields (69-99%) using an air-stable adduct of trimethylaluminium (AlMe₃)₂·DABCO (DABCO is 1,4-diazobicyclo[2.2.2]octane), referred to as DABAL-Me₃. Reactions can be run without requiring the exclusion of atmospheric oxygen or the drying of solvents.     

A new efficient synthesis of isothiocyanates from amines using di-tert-butyl dicarbonate

Alkyl and aryl amines are converted smoothly to the corresponding isothiocyanates via the dithiocarbamates in good to excellent yields using di-tert-butyl dicarbonate (Boc₂O) and 1-3 mol % of DMAP or DABCO as catalyst. As most of the byproducts are volatile, the work-up involves simple evaporation of the reaction mixture.     

[Cu4OCl6(DABCO)2]·0.5DABCO·4CH3OH (“MFU-5”): Modular synthesis of a zeolite-like metal-organic framework constructed from tetrahedral {Cu4OCl6} secondary building units and linear organic linkers

A novel metal-organic framework (MOF) based on a tetranuclear copper cluster and a linear organic ligand formulated as [Cu₄OCl₆(DABCO)₂]·0.5DABCO·4CH₃OH (denoted as MFU-5, MFU=Metal-Organic Framework, Ulm University; DABCO=1,4-diazabicyclo[2.2.2]octane), was prepared via solvothermal synthesis. In contrast with common MOF synthesis strategies, MFU-5 is assembled from pre-defined molecular secondary building units, i.e. {Cu₄OCl₆} moieties, which become the nodes of the coordination framework. The title compound was characterized by single crystal X-ray diffraction, variable temperature powder diffraction (VT-XRPD), thermal analysis, as well as IR- and UV/Vis spectroscopy. Crystal data for MFU-5: hexagonal, P6/mcc (no. 192), a=25.645(9), c=17.105(11) Å, V=9742(8) Å³, Z=12, 1690 structure factors, R[F²>2σ(F²)]=0.049. MFU-5 is a 3D metal-organic framework with 1D channels running along the c-axis hosting DABCO and methanol solvent molecules. The framework displays a zeolite-like structure constructed from mso cages, which represents the composite building units in the zeolites SSF, MSO and SZR. Two-fold interpenetration is observed between these building units. TG/DTA-MS and VT-XRPD characterization reveal a stepwise release of methanol and DABCO molecules upon heating, eventually resulting in a structural change into a non-porous material.     

Polymorphs of DABCO monohydrate as structural analogues of NaCl

A new crystalline form of 1,4‐diazabicyclo[2.2.2]octane (DABCO) monohydrate, C₆H₁₂N₂·H₂O, crystallizing in the space group P3₁, has been identified during screening for cocrystals. There are three DABCO and three water molecules in the asymmetric unit, with two DABCO molecules exhibiting disorder over two positions related by rotation around the N...N axis. As in the monoclinic C2/c (Z′ = 2) polymorph, the molecular components are connected via O—H...N hydrogen bonds into a polymeric structure that consists of linear O—H...N(CH₂CH₂)₃N...H—O segments, which are approximately mutually perpendicular. The two polymorphic forms of DABCO monohydrate can be considered as structural analogues of NaCl, with the nearly globular DABCO molecules showing distorted cubic closest packing and all octahedral interstices occupied by water molecules.     

DABCO-mediated aza-Michael addition of 4-aryl-1H-1,2,3-triazoles to cycloalkenones. Regioselective synthesis of disubstituted 1,2,3-triazoles

Aza-Michael addition of 4-aryl-1H-1,2,3-triazoles to 2-cycloalken-1-ones has been studied in the presence of DABCO as organic base. The reactions were carried out in acetonitrile at room temperature to provide 2,4-disubstituted 2H-1,2,3-triazoles as major adducts and 1,4-disubstituted 1H-1,2,3-triazoles as minor adducts. Though the reaction times are longer (4–8 days), the two regioisomers were separated by using column chromatography and the adducts were obtained in very good to excellent combined chemical yields. The electron-rich and electron-poor substituents on aryl moiety of 4-aryl-triazoles could tolerate the reaction conditions to afford the title adducts.     

Organic base catalyzed carbonyl allylation of methyl trifluoropyruvate with activated alkenes

The carbonyl allylation of methyl trifluoropyruvate (MeTFP) with activated alkenes has been investigated in detail using organic bases as catalysts. Organic bases, such as DMAP, Et₃N, DABCO, NMM, Et₂NH, and quinine, could deprotonate the allylic hydrogen of activated alkenes and furnish nucleophilic species to undergo the addition reaction with methyl trifluoropyruvate and afford versatile homoallylic alcohols with CF₃ group in excellent yields. The ¹⁹F NMR monitoring indicated that the isomerization induced by base gave two separable diastereoisomers in an equilibrium ratio of 1:3. The relative configuration of hydroxy and the neighboring alkyl group in the major diastereoisomer was determined as syn-configuration by X-ray diffraction analysis.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Discriminating Halogen‐Bonding from Other Noncovalent Interactions by a Combined NOE NMR/DFT Approach

Herein a combined NOE NMR/DFT methodology to discriminate between adducts held together by halogen bonding (XB) and other noncovalent interactions (non‐XB, such as lone pair/π), based on the determination of the XB donors′ and acceptors′ relative orientation, is proposed. In particular, ¹⁹F,¹H HOESY NMR spectroscopy experiments and DFT calculations on different XB donors, such as perfluorohexyl iodide ( I1 ), iodopentafluorobenzene ( I2 ) and bromopentafluorobenzene ( Br ), combined with different Lewis bases, such as 1,4‐diazabicyclo[2.2.2]octane ( DABCO ) and 2,4,6‐trimethylpyridine ( Me₃Py ), were performed. The results clearly show that in the case DABCO / I1 the XB adduct is practically the only one present in solution, whereas for the other pairs a certain amount of non‐XB adduct is present. Combining DFT and HOESY results, the amount of non‐XB adducts can be roughly quantified under our experimental conditions as 4 % for DABCO / I2 , between 10 and 20 % for Me₃Py / I1 and Me₃Py / I2 , and 44 % for DABCO / Br.     

Generation of Sulfonyl Radicals from Aryldiazonium Tetrafluoroborates and Sulfur Dioxide: The Synthesis of 3‐Sulfonated Coumarins

A catalyst‐free approach for the generation of sulfonyl radicals from aryldiazonium tetrafluoroborates in the presence of DABCO?(SO₂)₂ is realized. The combination of aryldiazonium tetrafluoroborates, DABCO?(SO₂)₂, and aryl propiolates affords 3‐sulfonated coumarins in good to excellent yields. This tandem reaction process involves radical addition, spirocyclization, and 1,2‐migration of esters. Additionally, the in situ diazotization of a number of anilines allows the directional synthesis of desired 3‐sulfonated coumarins in a one‐pot, two‐step process.     

Aza-Morita-Baylis-Hillman reaction of ethyl (arylimino)acetate with methyl vinyl ketone and ethyl vinyl ketone

Aza-Morita-Baylis-Hillman (aza-MBH) reaction of ethyl (arylimino)acetate with methyl vinyl ketone and ethyl vinyl ketone has been investigated. We found that aza-MBH adducts 1 could be formed in the presence of DABCO (30 mol %) and the corresponding adducts 2 could be obtained in the presence of PPh₃ (30 mol %) in moderate to good yields in acetonitrile under mild conditions, respectively.     

Organic/Bismuth Iodides Hybrids: Structural Perturbation of Substitutes and Their Photocurrent Response Properties

Two new organic/bismuth halides hybrids, (Et₂DABCO)₂(Bi₂I₁₀) (1) and (Pr₂DABCO)₂(Bi₂I₁₀) (2) (Et₂DABCO²⁺ = N, N’-diethyl-1,4-diazabicyclo[2.2.2] octane, Pr₂DABCO²⁺ = N, N’-diproyl-1,4- diazabicyclo[2.2.2] octane) have been synthesized. Both hybrids contain (Bi₂I₁₀)^4? halobismuthate dimers and (Et₂DABCO)²⁺/(Pr₂DABCO)²⁺ cations, and C–H···I hydrogen bonds contribute to the structural extending from 0-d clusters to 2-d layer (for 1) and 3-d network (for 2). Theoretical calculations were conducted to reveal the perturbation effects of 1,4-diazabicyclo[2.2.2] octane substitutes on their structures. Their absorption spectra were investigated, and energy band gaps of 2.10/2.16 eV indicate their narrow-gap semiconductor natures. Their photocurrent response properties were also discussed.     

Microwave acceleration in DABAL-Me3-mediated amide formation

Facile direct coupling of esters and secondary amines to afford tertiary amides proceeds under microwave irradiation using the air-stable trimethylaluminium source DABAL-Me₃ [(DABCO)(AlMe₃)₂]. Excellent yields (88-98%) are attained for cyclic secondary amines in reactions that are complete in 5-16 min. The process can be extended to the formation of Weinreb amides (upto 76% from commercial MeNHOMe·HCl) in a one-pot procedure using NaH to liberate the free methoxyamine.     

A Tetra-Porphyrin Host Exhibiting Interannular Cooperativity

Recently identified as another form of cooperativity, interannular cooperativity is rarely observed in supramolecular chemistry. A tetra-porphyrin molecular tweezer with two bis-porphyrin binding sites is reported that exhibits archetypal interannular cooperativity when complexing 1,4-diazabicyclo[2.2.2]octane (DABCO). The UV/Vis titration data best supported a 1:2 plus 2:2 plus 1:4 complexation model (host:guest), giving K₁₂=6.32×10¹³ m ⁻², K₂₂=3.04×10²⁰ m ⁻³, and K₁₄=1.92×10¹⁶ m ⁻⁴ in CHCl₃. The NMR titration data supported the formation of two sandwich species, including tetra-porphyrin⋅(DABCO)₂ as the major species, although there are speciation differences between UV/Vis and NMR concentrations. Using statistical analysis, interannular cooperativity (γ) for tetra-porphyrin⋅(DABCO)₂ was determined to be negative (γ=2.41×10⁻³), which may be explained by DABCO being too small to be optimally bound simultaneously at both bis-porphyrin binding sites.     

Photoreduction of Azaoxoisoaporphines by Amines: Laser Flash and Steady‐State Photolysis and Pulse Radiolysis Studies

Photoreduction of 7H‐benzo[e]perimidin‐7‐one (3‐AOIA, A1) and its 2‐methyl derivative (2‐Me‐3‐AOIA, A2) by non‐H‐donating amines (1,4‐diazabicyclo[2.2.2]octane [DABCO]; 2,2,6,6‐tetramethylpiperidine [TMP]), and a hydrogen‐donating amine (triethylamine [TEA]), has been studied in deaerated neat acetonitrile solutions using laser flash photolysis (LFP) and steady‐state photolysis. The triplet excited states of A1 and A2 were characterized by a strong absorption band with λ_max = 440 nm and lifetimes of 20 and 27 μs respectively. In the presence of tertiary amines, both triplet excited states were quenched with rate constants close to the diffusional limit (k_q ranged between 10⁹ and 10¹⁰ M^?1 s^?1). The transient absorption spectra observed after quenching with DABCO and TMP were characterized by maxima located at 460 nm and broad shoulders in the range of 500–600 nm. These transient species are attributed to solvent‐separated radical ion pairs and/or to isolated radical anions. In the presence of TEA, these transients undergo proton transfer, leading to the neutral hydrogenated radicals, protonated over the N1‐ and O‐atoms. Transient absorption spectra of these transients were characterized by maxima located at 400 and 520 nm and 430 nm respectively. Additional support for these spectral assignments was provided by pulse radiolysis (PR) experiments in acetonitrile and 2‐propanol solutions.     

Pressure and Temperature Effects on the Molecular Rotation in Acetonitrile-Water Mixtures

NMR spin-lattice relaxation time (T ₁) measurements were performed for ¹⁴N of acetonitrile in acetonitrile (CH₃CN)—H₂O mixtures and for ²H of heavy water in CH₃CN—D₂O mixtures at 30°C up to 294.2 MPa together with those for ²H in CH₃CN—D₂O mixtures at 10 and 20°C under atmospheric pressure over the whole composition range of the mixtures. IR absorption spectra for CH₃CN—H₂O and CH₃CN—10 mol% HDO/D₂O mixtures were obtained at 30°C under atmospheric pressure. Densities and viscosities of CH₃CN—H₂O mixtures were also measured under high pressure. The rotational correlation times for D₂O [τ _c (D)] and acetonitrile [τ _c (N)] were determined from T ₁ measurements. Under atmospheric pressure, τ _c (D) exhibits a small maximum around 10 mol% of acetonitrile at each temperature, and the maximum position is almost independent of temperature. These results suggest that the dipole–dipole interaction between acetonitrile and water molecules plays an important role in determining the rotational motion of water molecules in the mixtures. This is supported by the variation of the peak for the bending vibration of water molecules with composition. The decreases in τ _c (D) and τ _c (N) at higher acetonitrile contents are ascribed to the formation of acetonitrile dimer, trimer, and oligomer aggregates. Except for τ _c (D) in the water-rich region, the pressure coefficients of τ _c (D) and τ _c (N) are positive which is understood as a simple compression effect. Furthermore, the composition of mixture at which τ _c (D) and τ _c (N) show a maximum shifted to higher acetonitrile content with increasing pressure. These results are discussed in terms of the pressure effect on the equilibria of acetonitrile monomers with the aggregates of acetonitrile in the mixtures.