Synthesis and properties of a novel double network nanocomposite hydrogel

A novel polyacrylamide/polyacrylic acid (PAAm/PAA) double network (DN) nanocomposite (NC) hydrogel had been synthesized by two‐step solution polymerization. The PAAm network was crosslinked by inorganic clay while the PAA network was crosslinked by a chemical crosslinker. The chemical structure of the network was confirmed by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The swelling and mechanical strength properties of PAAm/PAA hydrogels were examined. The results showed that a DN hydrogel achieved both a high swelling capacity of 1219 g/g in deionized water and 124 g/g in 0.9 wt% NaCl solution and high compressive stress of 21.5 kPa in a high water content of 99.58%. Copyright © 2008 John Wiley & Sons, Ltd.     

Hydrogels of polyvinylpyrrolidone (PVP) and poly(acrylic acid) (PAA) synthesized by radiation-induced crosslinking of homopolymers

pH-sensitive PVP–PAA hydrogels have been prepared by electron-beam-induced irradiation at pH close to pKa of carboxylic groups. Protonation of these groups promoted the formation of hydrogen bonds between the PAA and PVP segments within the crosslinked structure and caused interpolymer complex formation. To demonstrate possible future application of such gels, we tested them as simple chemical detectors. When loaded with glucose oxidase, the PAA–PVP gel's turbidity and shrinkage was triggered by the presence of glucose due to a drop in pH caused by the enzymatic reaction.     

Characterization of well‐defined poly(ethylene glycol) hydrogels prepared by thiol‐ene chemistry

Considering the large number of applications for hydrogels, a better understanding of the relation between molecular structure and mechanical properties for well‐defined hydrogel is essential. A new library has been compiled of poly(ethylene glycol) polymers (PEG) of different length end functionalized with diallyl, dithiol, and dimethacrylate, and crosslinked with complementary trifunctional crosslinkers. In this study, the hydrogels were initially analyzed by FT‐Raman and NMR to study the conversion ratio of the functional groups. The effects of solvent type, solid content concentration, curing time and length of the PEG chains on the final leaching, swelling and tensile properties of the hydrogels were studied. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Highly stretchable and self-healing hydrogels based on poly(acrylic acid) and functional POSS

Herein, we present a novel way for the production of self-healing hydrogels with stretch beyond 4200% than their initial length and relatively high tensile strength(0.1?0.25 MPa). Furthermore, the hydrogel was insensitive to notch. Even for the samples containing V-notches, a stretch of 2300% was demonstrated. The hydrogels were developed by in situ crosslinking of the self-assembled colloidal poly(acrylic acid)(PAA)/functionalized polyhedral oligomeric silsesquioxane(POSS) micelles. This was achieved by the addition of functionalized polyhedral oligomeric silsesquioxane with tertiary amines and hydroxyls(POSS-AH) into the PAA reaction solution. The POSS-AH led to micellar growth, then the dualcrosslinked network was constructed. One type of crosslink was formed by hydrogen-bonding and ionic interactions between PAA chains and POSS-AH, the other type of crosslink was formed by covalent bonds between PAA and bis(N,N'-methylenebis-acrylamide).     

Compressive Elastic Moduli of Poly(N‐Isopropylacrylamide) Hydrogels Crosslinked with Poly(Dimethyl Siloxane)

Hydrophobically modified and thermally reversible neutral and ionic copolymer hydrogels were prepared from N‐isopropylacrylamide (NIPAAm), vinyl terminated poly (dimethylsiloxane) (VTPDMS) and itaconic acid (IA) by free radical solution polymerization, and their properties such as swelling ratio and compression modulus were studied at the 25°C. The incorporation of VTPDMS as a hydrophobic macrocrosslinker into the structures of neutral NIPAAm hydrogels increased their mechanical strength around 10 times than those of the ones crosslinked with conventional tetra functional monomer, i.e., N,N′‐methylene bisacrylamide (BIS). Compression modulus decreased with an increase in IA content for ionic samples and increased with increasing molecular weight and content of VTPDMS for neutral samples. It was assumed that in the first case, electrostatic repulsive forces resulting from the ionized carboxyl groups of IA were responsible for decreasing mechanical strength, while in the second case, hydrophobic interactions between dimethylsiloxane units of VTPDMS chains enhanced the compression moduli. According to the results presented in this work, it can be said that the right balance of hydrophobic and hydrophilic constituents and adjustment of the number of ionized groups, as well as crosslinking degree, change the structure and physical properties of NIPPAAm hydrogels.     

Adhesion properties of physically crosslinked elastic gels of poly(sodium acrylate)–poly(acrylic acid) mixtures evaluated by a point contact method

Adhesion properties of physically crosslinked hydrogels consisting of partially hydrated poly(sodium acrylate) (PSA) and poly(acrylic acid) (PAA) were investigated. The adhesion force and separation energy between the gels in swollen states were measured using a simple tack-evaluation technique by a point contact. As a result, the adhesion properties were significantly affected by the PSA/PAA ratio, which resulted from the fact that the physical and chemical properties of gels were changed through the replacement of PSA by PAA at gelation. The measurements of attenuated total reflectance Fourier transform infrared spectroscopy and the dynamic shear viscoelasticity suggested that the number of nonionized carboxyl groups increased and the stiffness increased with increasing the PAA ratio, respectively. In order to understand the adhesion properties further, the apparent contact area was evaluated by a stamp experiment using vermilion ink. The relationships between the adhesion properties and the physical and chemical features of gels are discussed in terms of the surface molecular interaction, the elastic and viscous properties of the bulk, and the apparent and true contact areas of the present system. From these results, the factors that determine the adhesion curve and the uniqueness and advantages of the present evaluation method are clarified.     

Pulsed NMR study of the structure of poly(vinyl alcohol)-poly(sodium acrylate) composite hydrogel

The heterogeneous structure of poly(vinyl alcohol)-poly(sodium acrylate) composite hydrogels (PVA-PAA gels), prepared by repeatedly freezing and thawing mixed aqueous solutions of PVA and PAA, has been studied using pulsed NMR. The free induction decay (FID) signals of the transverse magnetization for the PVA-PAA gels were measured by both Carr-Purcell-Meiboom-Gill and solid-echo pulse sequences. The FID signal was decomposed into two or three decaying signals with various spin-spin relaxation times, based upon differences in the molecular mobility that reflected structural heterogeneity. The structural heterogeneity of the PVA-PAA gel is quite different from that of PVA gel free of PAA. We have made observations on “crosslinked” domains in the PVA-PAA gels. They are formed by PVA solid chains, probably phase-separated in the freezing-thawing process. The formation of crosslinked domains is influenced by the number of freezing-thawing cycles. © 1994 John Wiley & Sons, Inc.     

A Rapidly and Highly Self-Healing Poly(Sulfobetaine Methacrylate) Hydrogel with Stretching Properties,Adhesive Properties,and Biocompatibility

This study focuses on the preparation of stretchable zwitterionic poly(sulfobetaine methacrylate) (PSBMA) hydrogels. To address the weak mechanical properties of chemically crosslinked PSBMA hydrogels, a physical crosslinking method utilizing hydrophobic interactions to crosslink hydrogels to approach tough properties is developed. Here, sodium dodecyl sulfate (SDS)-based micelle is used as a physical crosslinker to prepare physically crosslinked PSBMA (PSBMA_phy) hydrogels, and ethylene glycol dimethylacrylate (EGDMA) is used to prepare a control group of chemically crosslinked PSBMA (PSBMA_chem) hydrogels. The mechanical properties of the two hydrogels are compared, and PSBMA_phy hydrogels exhibit greater flexibility than the PSBMA_chem hydrogels. When the PSBMA_phy hydrogels are subjected to external forces, the micelles act as dynamic crosslinking sites, allowing the stress to disperse and prevent the hydrogel from breaking. In addition, the PSBMA_phy hydrogels have nearly 100% self-healing properties within 2.5 min. The PSBMA_phy hydrogels exhibit usable adhesive properties to porcine skin and subcutis. MTT and hemolysis tests show that the PSBMA_phy hydrogels have excellent biocompatibility and hemocompatibility. This study proposes that the multifunctional PSBMA_phy hydrogels with micelles will be potential to carry drugs for use in drug delivery systems in the future.     

Homogeneous hydrogels made with acrylic acid,acrylamide and chemically functionalized carbon nanotubes

Carbon nanotubes (CNTs) chemically functionalized were used to synthesize a series of novel nanocomposite hydrogels by in situ polymerization with acrylic acid (AA) and acrylamide (AM). A novel strategy was developed to prepare these hydrogels. CNTs were functionalized following a three-step chemical procedure: (i) purified carbon nanotubes (CNTs_p) were partially surface oxidized to obtain CNTs with hydroxyl, carbonyl and carboxyl groups on their sidewalls (CNTs_oxi), (ii) CNTs_oxi were reacted with oxalyl chloride to obtain CNTs functionalized with acyl chloride groups (CNTs_OCl), and (iii) CNTs_OCl were reacted with acrylic acid (AA). The product, AA modified CNTs_OCl (CNTs_OCl-AA) was used to prepare the (CNTs_OCl-AA-AM) nanocomposite hydrogels, where anhydride groups were tethered to the surface of the CNTs_OCl-AA. The swelling process in water was evaluated as a consequence of the anhydride group hydrolysis, which broke some chemical links between CNTs_OCl-AA and crosslinked AA-AM network. Equilibrium-swelling values of all hydrogels increased as the content of AA increased and were larger for AA-AM hydrogels than for CNTs_OCl-AA-AM nanocomposite hydrogels. Young’s moduli of CNTs_OCl-AA-AM nanocomposite hydrogels prepared with 1 or 2?wt.% AA, reached larger values than those measured for AA-AM hydrogels. This tendency was reversed when the AA content was raised to 3?wt.%.     

Green chemistry for the synthesis of methacrylate-based hydrogels crosslinked through Diels–Alder reaction

This study describes an environmentally friendly and green synthetic approach for the preparation of poly(aminoethylmethacrylate)-based hydrogels crosslinked through Diels–Alder (DA) reaction in water. This “click” reaction offers the possibility of preparing chemically crosslinked hydrogels in the absence of any catalyst, initiator or coupling agent, thus preserving the biocompatibility of the material. The suitable furan diene was obtained by modifying a methacrylate polymer by its reaction with furfural, a first generation compound derived from renewable resources. Methacrylate-based complementary polymeric dienophiles were also prepared by introducing maleimide groups into the structure. The products obtained at different steps were characterized by FTIR, NMR and TGA techniques. The study of the rheological properties of the hydrogels proved the success of this green “click” synthetic strategy confirming the formation of chemically crosslinked networks by the use of the Diels–Alder reaction. Furthermore, SEM studies revealed promising morphological properties of the ensuing hydrogels in terms of biomedical applications.     

Poly(N-isopropylacrylamide) nanocrosslinked by polyhedral oligomeric silsesquioxane: temperature-responsive behavior of hydrogels

Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as a nanocrosslinking agent to prepare the crosslinked poly(N-isopropylacrylamide) (PNIPAM) networks with POSS content up to 50 wt%. The inter-component crosslinking was achieved via the reaction between NH moieties in amide group of PNIPAM and epoxide groups of OpePOSS. When the organic-inorganic nanocomposites were swollen in water the POSS-crosslinked PNIPAM exhibited the characteristics of hydrogels. With the moderate contents of POSS, the POSS-containing hybrid hydrogels displayed much faster response rates in swelling, deswelling and reswelling experiments than the PNIPAM hydrogels prepared via the free radical copolymerization of N-isopropylacrylamide (NIPAM) and N,N(')-methylenebisacrylamide (viz. the conventional crosslinker). The improved hydrogel properties have been interpreted on the basis of the formation of the nanosized hydrophobic microdomains around the POSS moieties (i.e., the nanocrosslinking sites).     

Photocrosslinked hydrogels based on copolymers of poly(ethylene glycol) and lysine

A group of new, water-soluble poly(ether-urethane)s, derived from poly(ethylene glycol) and the amino acid L -lysine, provide pendent carboxylic acid groups along the polymer backbone at regular intervals. The carboxylic acid groups were utilized for the attachment of acrylate and methacrylate pendent chains (hydroxyethyl acrylate, hydroxyethyl methacrylate, aminoethyl methacrylate, and aminoethyl methacrylamide), leading to functionalized polymers. The pendent chains were attached via ester and/or amide bonds having different degrees of hydrolytic stability. The attachment reactions proceeded with high yields (up to 95%). The functionalized polymers were subsequently photopolymerized (UV irradiation) to obtain crosslinked hydrogels. Crosslinked membranes with the highest degree of mechanical strength were obtained when the crosslinking reaction was performed in dioxane with benzoin methyl ether (0.1 wt %) as the initiator. the crystallinity, thermomechanical properties, and hydrolytic stability of the crosslinked membranes were studied. All membranes were transparent and highly swellable (equilibrium water content: 64–88%). The tensile strength in the swollen state ranged from 0.15 to 1.09 MPa. Under physiological conditions (phosphate buffered water, 0.1M, pH 7.4, 37°C) the hydrolytic stability of the hydrogels varied depending on the bonds used in the attachment of the acrylate pendent chains: Hydrogels with hydroxyethyl acrylate pendent chains dissolved within 30 days, while hydrogels containing aminoethyl methacrylamide pendent chains remained unchanged throughout a 30 day period. Using high molecular weight FITC-dextrans as model compounds, complete release from the swollen hydrogels required between 60 and 150 h. Overall, the evaluation of poly(ethylene glycol)-lysine derived, photocrosslinked hydrogels indicated that these materials provide a range of potentially useful properties. © 1994 John Wiley & Sons, Inc.     

Toughening hydrogels by immersing with oppositely charged polymers

A very simple yet novel strategy to significantly enhance the mechanical properties of hydrogels is reported. Poly(acrylic acid) (PAA) hydrogels with aligned macroporous channels are immersed in the aqueous solutions of poly(dimethyl diallyl ammonium chloride) (PDMDAAC). Strong electrostatic interactions are formed between the anionic PAA and cationic PDMDAAC chains. In the resultant PAA/PDMDAAC hybrid hydrogels, the mass ratio of PDMDAAC to PAA is about 0.2 and PDMDAAC is uniformly distributed throughout the gels. The mechanical properties of the formed hybrid hydrogels are largely enhanced in comparison with the original PAA hydrogels. The hybrid hydrogels exhibit high tensile strengths (0.38–1.73 MPa), elastic moduli (0.21–1.59 MPa) and toughness (up to 3.0 MJ/m³), about several to more than 10 times those of the corresponding PAA hydrogels. In addition, the PAA/PDMDAAC hydrogels also show excellent and very rapid shape recovery ability in both air and deionized water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2432–2441     

Thermosensitive hydrogel coatings: Synthesis and heparin release

The synthesis and drug release properties of crosslinked N-isopropylacrylamide (NiPAAm) copolymer coatings on the surface of a hydrophobic poly(ester-urethane) tubing were examined. A method was designed to coat hydrophobic polymer surface with a thermosensitive gel layer. Crosslinked NiPAAm copolymer coatings were synthesized using UV-initiated polymerization. The feasibility of using NiPAAm based gels as heparin releasing thermosensitive coatings was investigated. Heparin, a high molecular weight hydrophilic solute, was loaded into hydrogels using a simple solution sorption technique. The release of heparin from NiPAAm copolymer gel coatings was compared to that of crosslinked NiPAAm copolymers. The gel coatings demonstrated a more gradual and prolonged heparin release as compared to gel disks of the same composition.     

Novel poly(amido-amine)-based hydrogels as scaffolds for tissue engineering

Biodegradable and biocompatible amphoteric poly(amido-amine) (PAA)-based hydrogels, containing carboxyl groups along with amino groups in their repeating unit, were considered as scaffolds for tissue engineering applications. These hydrogels were obtained by co-polymerising 2,2-bisacrylamidoacetic acid with 2-methylpiperazine with or without the addition of different mono-acrylamides as modifiers, and in the presence of primary bis-amines as crosslinking agents. Hybrid PAA/albumin hydrogels were also prepared. The polymerisation reaction was a Michael-type polyaddition carried out in aqueous media. The PAA hydrogels were soft and swellable materials. Cytotoxicity tests were carried out by the direct contact method with fibroblast cell lines on the hydrogels both in their native state (that is, as free bases) and as salts with acids of different strength, namely hydrochloric, sulfuric, acetic and lactic acid. This was done in order to ascertain whether counterion-specific differences in cytotoxicity existed. It was found that all the amphoteric PAA hydrogels considered were cytobiocompatible both as free bases and salts. Selected hydrogels samples underwent degradation tests under controlled conditions simulating biological environments, i.e. Dulbecco medium at pH 7.4 and 37 degrees C. All samples degraded completely and dissolved within 10 d, with the exception of hybrid PAA/albumin hydrogels that did not dissolve even after eight months. The degradation products of all samples turned to be non-cytotoxic. All these results led us to conclude that PAA-based hydrogels have a definite potential as degradable matrices for biomedical applications.     

Fabrication,chemical modification,and topographical patterning of reactive gels assembled from azlactone‐functionalized polymers and a diamine

The work reported here demonstrates an approach to the fabrication of chemically reactive and topographically patterned hydrogels using the azlactone‐functionalized polymer poly(2‐vinyl‐4,4'‐dimethylazlactone) (PVDMA) and the hydrophilic diamine Jeffamine®. Gels were initially assembled in DMSO but can be subsequently transferred into aqueous media to form hydrogels. Spectroscopic characterization of assembled gels demonstrated that variation in the stoichiometric ratio of azlactones to amines during gel synthesis permits control over the extent of crosslinking in the gels. Residual azlactones not consumed during crosslinking can be exploited to further functionalize these gels with hydrophobic, hydrophilic, and macromolecular amines that influence the physicochemical properties of these materials in aqueous solvents. The surface and bulk of these gels can be differentially functionalized (i.e., different functional groups on the gel surface relative to the bulk) by taking advantage of different rates of diffusion of macromolecular amines versus small molecule amines into assembled gels. Finally, these azlactone‐functionalized gels can be topographically patterned with microwell arrays using a replica molding technique and chemically modified postfabrication with amine nucleophiles. This reactive approach to the fabrication of topographically patterned and chemically functionalized hydrogels offers a straightforward method for the rapid synthesis of micropatterned scaffolds of interest in a broad range of applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3185–3194     

Structural rearrangement and stiffening of hydrophobically modified supramolecular hydrogels during thermal annealing

Dynamic crosslinks formed by thermoreversible associations provide an energy dissipation mechanism to toughen hydrogels. However, the details of the organization of these crosslinks impact the hydrogel properties through constraints on the network chain conformation. The physical crosslinks generated by hydrophobic association of the 2‐(N‐ethylperfluorooctane‐sulfonamido)ethyl methacrylate (FOSM) groups in a random copolymer of N,N‐dimethylacrylamide (DMA) and FOSM provide a simple system to investigate how the hydrogel structure (as determined from small angle neutron scattering impacts the mechanical properties of the hydrogel. The initial hydration of the copolymer at 25 °C leads to a kinetically trapped structure with large‐scale heterogeneities. Heating the hydrogel at 60 °C, which is above the glass transition temperature for the FOSM domains, allows the hydrogel structure to rearrange to reduce the density of network defects and the structural heterogeneities. That effectively increases the crosslink density of the network, which stiffens the hydrogel and decreases the swelling at equilibrium at 25 °C. The processing history determines how the hydrophobes aggregate to form the physically crosslinked network, whose structure defines the mechanical properties of these hydrogels. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1036–1044     

Crosslinked nanofibrillated cellulose: poly(acrylic acid) nanocomposite films; enhanced mechanical performance in aqueous environments

Nanofibrillated cellulose (NFC) was compounded with poly(acrylic acid) (PAA) via solvent casting. Nanocomposite films were thermally-crosslinked to allow the formation of ester bonds between NFC and PAA, as confirmed by ¹³CNMR and infrared spectroscopy. The network morphology of the cellulose nanofibrils was left intact by the introduction of PAA and crosslinking. Water absorption and swelling was diminished by the introduction of crosslinking, due to the reduced number of vacant hydroxyl and carboxyl groups available to interact with water molecules. Crosslinking with PAA increased the activation energy required for thermal degradation. PAA effectively reinforced NFC, increasing Young’s modulus, tensile strength and glass transition temperature. Crosslinking imparted restraints on segmental motion of polymer chains, further enhancing the thermomechanical properties and retaining elasticity. Wet-strength properties were enhanced due to the reduced hydrophilicity of crosslinked nanocomposite films.     

Mechanically tough and recoverable hydrogels via dual physical crosslinkings

Development of functional tough hydrogels with new network structures and energy dissipation mechanisms has great promise for many applications. Here, a new type of physical hydrogel crosslinked by hydrophobic association and hydrogen bonds was synthesized by a facile micellar copolymerization of hydrophobic methyl acrylate (MA) monomers and hydrophilic N-hydroxyethyl acrylamide (HEAA) monomers in the presence of Tween80 micelles. Strong hydrophobic association between inner MA and Tween80 and hydrogen bonds between external polyHEAA and Tween80 provide two distinct crosslinkers to construct mechanically tough and recoverable network. Mechanical properties of polyHEAA-MA@Tween80 hydrogels strongly depended on network components (HEAA, MA; Tween80 concentrations). At optimal conditions, the hydrogels can achieve fracture stress of 700 kPa, fracture strain of 1687 mm/mm, elastic modulus of 195 kPa, and tearing energy of 1598 J/m². Due to the reversible nature of physical interactions, polyHEAA-MA@Tween80 hydrogels can achieve fast stiffness/toughness recovery of 60%/33% without any external stimuli and resting time at room temperature. This work demonstrates a new design strategy to fabricate a new a single-network hydrogel with high mechanical and self-recovery properties by incorporating both hydrophobic association and hydrogen bonds in the network, which may provide alternative viewpoint for the design of multifunctional tough hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1294–1305     

单宁作为共引发剂和交联剂制备高伸长率水凝胶

以过硫酸铵为引发剂(APS)、杨梅综合单宁(TA)作为共引发剂和交联剂,通过自由基聚合制备了高伸长率水凝胶(TIC-gel)。通过红外光谱(FT-IR)、核磁共振(~1 H-NMR)和浸泡尿素的方法研究了TA在TIC-gel中形成化学交联的机理。通过拉伸、压缩测试和流变学测试系统地分析了TIC-gel的力学性能和影响因素。结果表明:相比于传统化学交联水凝胶(PAM-MBA-gel),利用TA制备的凝胶具有高伸长率(2 250%)和高韧性(3.51 MJ/m3)。利用这一新的形成交联的方法所得的凝胶即使在高浓度时也能形成均匀的结构,可以很好地分散应力,为TIC-gel的高伸长率作出贡献。